Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_24
id	acadia16_24
authors	Savov, Anton; Buckton, Ben; Tessmann, Oliver
year	2016
title	20,000 Blocks: Can gameplay be used to guide non-expert groups in creating architecture?
doi	https://doi.org/10.52842/conf.acadia.2016.024
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 24-33
summary	The paper follows research in engaging groups of non-trained individuals in the creation of architectural designs using games and crowdsourcing for human-directed problem-solving. With the proposed method, architectural experts can encode their design knowledge into custom-developed multiplayer gameplay in Minecraft. Non-expert players then are constrained by this gameplay which guides them to create unique architectural results. We describe a method with three components: guiding rules, verification routines and fast feedback. The method employs a real-time link between the game and structural analysis in Grasshopper to verify the designs. To prove the viability of these results, we use robotic fabrication, where the digital results are brought to reality at scale. A major finding of the work is the suite of tools for calibrating the balance of influence on the resulting designs between the Experts and the Players. We believe that this process can create designs which are not limited to parametrically optimal solutions but could also solve real-world problems in new and unexpected ways.
keywords	robot-human collaboration, digital fabrication, gaming in design, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	ecaade2016_140
id	ecaade2016_140
authors	Simeone, Davide, Coraglia, Ugo Maria, Cursi, Stefano and Fioravanti, Antonio
year	2016
title	Behavioural Simulation for Built Heritage Use Planning
doi	https://doi.org/10.52842/conf.ecaade.2016.2.503
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 503-510
summary	This paper presents a system for simulating human behaviour in built heritage artefacts aimed at supporting the decision-making processes for their possible re-use.Its goal is to predict the mutual influence between the occupancy phenomena and the architectural heritage environment, in order to optimise the balance between efficiency requirements of spaces and preservation needs of the heritage artefact. The proposed system is based on the integration of a BIM environment with a game engine that allows the modelling of the built environment and the simulation of its use phenomena at the same time. A central role in the systems is played by the distribution of Artificial Intelligence among Virtual Users, process entities (the activities) and the building components, ensuring the coherent representation of the use processes and the direct measurement of their impact on the artefact.
wos	WOS:000402064400050
keywords	Built Heritage; Human Behaviour Simulation; Agent-Based Modelling; BIM
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2016_063
id	ecaade2016_063
authors	Al-Qattan, Emad, Galanter, Philip and Yan, Wei
year	2016
title	Developing a Tangible User Interface for Parametric and BIM Applications Using Physical Computing Systems.
doi	https://doi.org/10.52842/conf.ecaade.2016.2.621
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 621-630
summary	This paper discusses the development of an interactive and a responsive Tangible User-Interface (TUI) for parametric and Building Information Modeling (BIM) applications. The prototypes presented in this paper utilizes physical computing systems to establish a flexible and intuitive method to engage digital design processes.The prototypes are hybrid UIs that consist of a digital modeling tool and an artifact. The artifact consists of a control system (sensors, actuators, and microcontrollers) and physical objects (architectural elements). The link between both environments associates physical objects with their digital design information to assist users in the digital design process. The integration of physical computing systems will enable the objects to physically respond to analog input and provide real-time feedback to users. The research aims to foster tangible computing methods to extend the capabilities of digital design tools. The prototypes demonstrate a method that allows architects to simultaneously interact with complex architectural systems digitally and physically.
wos	WOS:000402064400063
keywords	Physical Computing; Parametric Design; BIM; Tangible UI
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	acadia16_206
id	acadia16_206
authors	Devadass, Pradeep; Dailami, Farid; Mollica, Zachary; Self, Martin
year	2016
title	Robotic Fabrication of Non-Standard Material
doi	https://doi.org/10.52842/conf.acadia.2016.x.g4f
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp
summary	This paper illustrates a fabrication methodology through which the inherent form of large non-linear timber components was exploited in the Wood Chip Barn project by the students of Design + Make at the Architectural Association’s Hooke Park campus. Twenty distinct Y-shaped forks are employed with minimal machining in the construction of a structural truss for the building. Through this workflow, low-value branched sections of trees are transformed into complex and valuable building components using non-standard technologies. Computational techniques, including parametric algorithms and robotic fabrication methods, were used for execution of the project. The paper addresses the various challenges encountered while processing irregular material, as well as limitations of the robotic tools. Custom algorithms, codes, and post-processors were developed and integrated with existing software packages to compensate for drawbacks of industrial and parametric platforms. The project demonstrates and proves a new methodology for working with complex, large geometries which still results in a low cost, time- and quality-efficient process.
keywords	parametric design, craft in digital communication, digital fabrication, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:49

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2016_477
id	caadria2016_477
authors	Ma, Y. P.; M. C. Lin and C. C. Hsu
year	2016
title	Enhance Architectural Heritage Conservation Using BIM Technology
doi	https://doi.org/10.52842/conf.caadria.2016.477
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 477-486
summary	Common problems tend to surface during the restoration and maintenance of wooden structures for architectural heritage: (1) recording and communicating geometric and non-geometric infor- mation, (2) integrating and managing the multiple phases of construc- tion and (3) the structural damage that can be incurred during the dis- mantling process. This leads to less confidence in the quality of restoration and maintenance. This study considers the traditional wooden structures in Taiwan as a basis to discuss the issues faced dur- ing restoration and the gap in communication between designers and builders. Using new techniques, resources and the concept of BIM, a plugin is developed for guiding restoration. It serves as a BIM-based communication platform for designers and builders, enabling the real- time exchange of information to minimise any gaps that may exist be- tween the designers’ information and that of the builders. This allows information related to the restoration to be more accurate and offers the assurance that the traditional architecture retains its original struc- ture and value.
keywords	Architectural heritage; conservation; digital achievement; BIM; wooden frameworks
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ijac201614401
id	ijac201614401
authors	Mark, Earl and Zita Ultmann
year	2016
title	Environmental footprint design tool: Exchanging geographical information system and computer-aided design data in real time
source	International Journal of Architectural Computing vol. 14 - no. 4, 307-321
summary	The pairing of computer-aided design and geographical information system data creates an opportunity to connect an architectural design process with a robust analysis of its environmental constraints. Yet, the geographical information system data may be too overwhelmingly complex to be fully used in computer-aided design without computer-assisted methods of filtering relevant information. This article reports on the implementation of an integrated environment for three-dimensional computer-aided design and environmental impact. The project focused on a two-way data exchange between geographical information system and computer-aided design in building design. While the two different technologies may rely on separate representational models, in combination they can provide a more complete view of the natural and built environment. The challenge in integration is that of bridging the differences in analytical methods and database formats. Our approach is rooted in part in constraint-based design methods, well established in computer-aided design (e.g. Sketchpad, Generative Components, and computer-aided three-dimensional interactive application). Within such computer-aided design systems, geometrical transformations may be intentionally constrained to help enforce a set of design determinants. Although this current implementation modestly relates to geometrical constraints, the use of probabilistic risk values is more central to its methodology.
keywords	Boolean analysis, area overlay analysis, attribute classification, data transition using .csv, vectorization, risk analysis, site planning
series	journal
email
last changed	2016/12/09 10:52

_id	ecaade2016_142
id	ecaade2016_142
authors	Rejepava, Alina, Haring, Mario and Gruber, Anna
year	2016
title	AMA - Additive Merged Appliance
doi	https://doi.org/10.52842/conf.ecaade.2016.1.179
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 179-184
summary	The production of concrete structure components is often a backbreaking process due to the inconvenient and time-consuming process of producing the formwork. Depending on the geometry, this can be a very time-consuming activity. A trial will be made to solve these problems within the manufacturing process using adapted binder jetting technology. First of all, the research will deal with the behavior of concrete as well as the bond between the cement paste and the aggregate. Various additives and grain sizes will be determined to find an appropriate result. On the other hand, different spray and drop systems will be analyzed to compare the new method and the common binder jetting setup. After fabricating some geometrical shapes manually the study is going to be continued using computer-aided manufacturing.
wos	WOS:000402063700020
keywords	3D Print ; Binder Jetting; Concrete; Robotics; Additive Fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2016_147
id	ecaade2016_147
authors	Tamke, Martin, Zwierzycki, Mateusz, Evers, Henrik Leander, Ochmann, Sebastian, Vock, Richard and Wessel, Raoul
year	2016
title	Tracking Changes in Buildings over Time - Fully Automated Reconstruction and Difference Detection of 3d Scan and BIM files
doi	https://doi.org/10.52842/conf.ecaade.2016.2.643
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 643-651
summary	Architectural and Engineering Communities are interested in the detection of differences between different representations of the same building. These can be the differences between the design and the as-built-state of a building, or the detection of changes that occur over time and that are documented by consecutive 3D scans. Current approaches for the detection of differences between 3D scans and 3D building models are however laborious and work only on the level of a building element. We demonstrate a novel highly automated workflow to detect differences between representations of the same building. We discuss the underlying tools and methods and the ways to communicate deviations and differences in an appropriate manner and evaluate our approach with a rich set of real world datasets.
wos	WOS:000402064400065
keywords	3d scan; BIM; Machine learning; Point Clouds; Big Data
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2016_497
id	caadria2016_497
authors	Ryu, Jungrim; Jaehong Jun, Seunghyeon Lee and Seungyeon Choo
year	2016
title	A Study on Development of the IFC-based Indoor Spatial Information for Data Visualisation
doi	https://doi.org/10.52842/conf.caadria.2016.497
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 497-506
summary	MOLIT authorised Indoor Spatial Information as Basic spa- tial information in 2013. It became a legal evidence for constructing and managing Indoor Spatial Information. Although it has a little ad- vantage to utilise as service level that Indoor Spatial Information by laser scan or measurement, it has a lot of problems such as consuming many resources, requiring additional progresses for inputting Object Information. In conclusion, it is inefficient to utilise for the mainte- nance and domestic AEC/FM field. The purposes of this study is to output Indoor Spatial Information by operating IFC model which based on open BIM and to improve availability of Indoor Spatial In- formation with data visualisation. The open-sources of IFC Exporter, an inner program of Revit, is used to output Indoor Spatial Infor- mation. Directs 3D Library is also operated to visualise Indoor Spatial Information. It is possible to inter-operate between XML format and the objects of Indoor Spatial Information. It can be utilised in various field as well. For example COBie linkage in facility management, construction of geo-database using air-photogrammetry of UA V , the simulation of large-scale military operations and the simulation of large-scale evacuation. The method that is purposed in this study has outstanding advantages such as conformance with national spatial in- formation policy, high level of interoperability as indoor spatial in- formation objects based on IFC, convenience of editing information, light level of data and simplifying progress of producing information.
keywords	Indoor spatial information, data visualisation, open BIM, IFC
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2016_517
id	caadria2016_517
authors	Shen, Yang Ting and Pei Wen Lu
year	2016
title	Development of Kinetic Facade Units with BIM-Based Active Control System for the Adaptive Building Energy Performance Service
doi	https://doi.org/10.52842/conf.caadria.2016.517
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 517-526
summary	This paper proposes a novel concept and practice to engage the BIM model as a control system of building energy performance service. This issue can be divided into two sub-issues including the development of more eco-friendly fac?ade which can interact with its local environment, and the related active control system which can process the environmental parameters for eco-friendly actions. This research designs the Parametric Adaptive Skin System (PASS) to en- gage the adaption of natural sunlight use for higher building perfor- mance. PASS consists of kinetic fac?ade components dominated by the BIM-based parametric engine called Dynamo. The PASS prototype demonstrates that the workflows is successful in using a real light sen- sor plus simulated solar terms to drive the interaction of virtual Revit model and physical PASS model.
keywords	Building information modelling (BIM); adaptive building; energy consumption; building performance; kinetic fac?ade
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ijac201614408
id	ijac201614408
authors	Bard, Joshua David; David Blackwood, Nidhi Sekhar and Brian Smith
year	2016
title	Reality is interface: Two motion capture case studies of human–machine collaboration in high-skill domains
source	International Journal of Architectural Computing vol. 14 - no. 4, 398-408
summary	This article explores hybrid digital/physical workflows in the building trades, a high-skill domain where human dexterity and craft can be augmented by the precision and repeatability of digital design and fabrication tools. In particular, the article highlights two projects where historic construction techniques were extended through live motion capture of human gesture, information-rich visualization projected in the space of fabrication and custom robotic tooling to generate free-form running moulds. The first case study explores decorative plastering techniques and an augmented workflow where designers and craftspeople can quickly explore patterns through freehand sketch, test ideas with shaded previews and seamlessly produce physical parts using robotic collaborators. The second case study reimagines a roman vaulting technique that used terracotta bottles as part of an interlocking masonry system. Motion capture is used to place building elements precisely in material arrays with real-time visual feedback guiding the hand-held placement of each bottle. These case studies serve to underscore the emerging importance of reality capture in the design and construction of the built environment. Increasingly, the algorithmic power of computational tools and the nuances of human skill can be combined in hybrid design and fabrication workflows.
keywords	Reality computing, motion capture, robotic fabrication, haptic interface, hybrid skill, human–machine collaboration, reality capture
series	journal
email
last changed	2016/12/09 10:52

_id	sigradi2017_078
id	sigradi2017_078
authors	Brandão, Filipe; Ricardo Correia, Alexandra Paio
year	2017
title	Rhythms of Renewal of the City
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.534-540
summary	In the last few years, building renovation has gained an unprecedented relevance in Portugal, yet it is an asymmetric and urban phenomenon for the study of which, in space and in time, traditional statistic tools have limitations. Using computational tools, it is possible to generate maps that correlate building permits georeferenced data and their processing time. Using Lisbon City Hall database of planning applications and georeferenced vector information, two approaches are developed to represent the internal dynamic of renewal of the city between 2010 and 2016. These maps can be useful to improve the accessibility of planning information to citizens.
keywords	Urban renewal; Building renovation; Lisbon; Time; Representation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_488
id	acadia16_488
authors	Derme, Tiziano; Mitterberger, Daniela; Di Tanna, Umberto
year	2016
title	Growth Based Fabrication Techniques for Bacterial Cellulose: Three-Dimensional Grown Membranes and Scaffolding Design for Biological Polymers
doi	https://doi.org/10.52842/conf.acadia.2016.488
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 488-495
summary	Self-assembling manufacturing for natural polymers is still in its infancy, despite the urgent need for alternatives to fuel-based products. Non-fuel based products, specifically bio-polymers, possess exceptional mechanical properties and biodegradability. Bacterial cellulose has proven to be a remarkably versatile bio-polymer, gaining attention in a wide variety of applied scientific applications such as electronics, biomedical devices, and tissue-engineering. In order to introduce bacterial cellulose as a building material, it is important to develop bio-fabrication methodologies linked to material-informed computational modeling and material science. This paper emphasizes the development of three-dimensionally grown bacterial cellulose (BC) membranes for large-scale applications, and introduces new manufacturing technologies that combine the fields of bio-materials science, digital fabrication, and material-informed computational modeling. This paper demonstrates a novel method for bacterial cellulose bio-synthesis as well as in-situ self-assembly fabrication and scaffolding techniques that are able to control three-dimensional shapes and material behavior of BC. Furthermore, it clarifies the factors affecting the bio-synthetic pathway of bacterial cellulose—such as bacteria, environmental conditions, nutrients, and growth medium—by altering the mechanical properties, tensile strength, and thickness of bacterial cellulose. The transformation of the bio-synthesis of bacterial cellulose into BC-based bio-composite leads to the creation of new materials with additional functionality and properties. Potential applications range from small architectural components to large structures, thus linking formation and materialization, and achieving a material with specified ranges and gradient conditions, such as hydrophobic or hydrophilic capacity, graded mechanical properties over time, material responsiveness, and biodegradability.
keywords	programmable materials, material agency, biomimetics and biological design
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ascaad2016_009
id	ascaad2016_009
authors	Elbasdi, Gulay; Sema Alaçam
year	2016
title	An Investigation on Growth Behaviour of Mycelium in a Fabric Formwork
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 65-74
summary	Most progress in designing mycelium-based material to date has been made by using petri dish and 3d printed geometries. In this study, reshaping capabilities of mycelium-based materials using fabric formwork is being discussed. This ongoing study is the result of a series of experiments about mycelium-based material that aims to investigate its potentials as free- form geometry. In this paper, we aim to make a comparison between initial and end shapes by implementing digital and analogue tools based on mycelium-based fabric formwork experiment. The physical experiment setup consists of different initial geometry alternatives and the deformation will be observed and measured numerically by time-based recording on top and section views. With the help of digital tools, experiments will be documented as a process of formation. We aim to discuss the potential of the usage of mycelium as a binding agent in free form geometry since mycelium acts as natural self-assembling glue. By doing so, structural potentials of the material, which is strengthened by mycelium hyphae, were examined. This study aims to contribute to the design research studies and scientific knowledge together to integrate living systems into the material design as encouraging collaborative interdisciplinary research, thereby positioning designer as a decision-maker from the very beginning of material design process.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	sigradi2016_443
id	sigradi2016_443
authors	Henriques, Gonçalo Castro; Passaro, Andrés
year	2016
title	Desafiando a Gravidade: da estática ? dinâmica, de objetos a sistemas []
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.704-709
summary	In the cold space of information objects drift in the void. All is abandoned in junk space or fiercely organized. The difference between an object as a form and formations - or interacting populations of elements in an environment - is still disregarded. In Cartesian space objects are preconceived by an external observer, in static and timeless space. In parametric space Euclidian geometries persist as preconfigured objects. The flux of information between physical and digital realities is still archaic: is done with effort, demanding physical strength and time. There is low interaction between physical and digital realities. Seems like a dystopian reality in a past?future. The theory of relativity asserts that space and time are interdependent, being modified and modifying us. In organic and synthetic biology, form results from the dynamic interaction of elements. This Research argues that form and environment are interdependent in physical and digital dimensions. A two-part applied research method is proposed: preliminary research and further development via workshop. Preliminary research identified the knowledge areas involved, defined problem search space and tested methods and techniques to solve it. The successfully developed design methodology - combining the preliminary research and workshop - can be used to solve future design problems.
keywords	Responsive systems; Physical and digital interaction; Algorithmic design; Applied research
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_363
id	caadria2016_363
authors	Lee, Alexander; Suleiman Alhadidi and M. Hank Haeusler
year	2016
title	Developing a Workflow for Daylight Simulation
doi	https://doi.org/10.52842/conf.caadria.2016.363
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 363-372
summary	Daylight simulations are occasionally used as active tools in regards to local governing regulations, which are necessary for providing documentation. Simulation tools have been avoided in the past due to their barriers. Daylight simulation tools are used within documentation design stages as ‘passive tools’, however they do not have a direct impact on the architecture design decisions, as passive tools are used by engineers usually to derive material and glass speci- fications. Recent developments within an online community have pro- vided designers with access to daylight simulation tools within a de- sign platform accessible data can be modified and represented with local governing codes to provide designers with relevant information. The paper aimed to develop an active daylight simulation tool within a design platform. Data is filtered with the Green Star benchmarks to export visual information as well as a voxel matrix instead of 2D lu- minance maps. This paper outlines a workflow of the simulation tool used to evaluate daylight performance of a selected building as a case study in real time. The paper also details potential problems and justi- fied suggestions derived from the analysis for the building to reach the requirements within the Green Star Multi Unit Residential.
keywords	Data-driven design; computation environmental design; daylight simulation; Green Star
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2016_281
id	caadria2016_281
authors	Pinochet, Diego
year	2016
title	Making - Gestures: Continuous design through real time Human Machine interaction
doi	https://doi.org/10.52842/conf.caadria.2016.281
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 281-290
summary	Design is “something that we do” that is related to our unique human condition as creative individuals, so as “making” is related to how we manifest and impress that uniqueness into our surrounding environment. As designers, the way we impress our ideas into the material world is tightly connected to a ‘continuous creative performance’ and with concepts often missing in digital design and fabrication techniques –yet present in analog processes - such as ambiguity, improvisation and imprecision. In this paper, a model of human-machine interaction is proposed, that seeks to transcend the ‘hylomorphic’ model imperative in today’s digital architectural design practice to a more performative and reciprocal form of computational making. By using body gestures and imbuing fabrication machines with behaviour, the research seeks to embrace the concept of ‘performance and error’ as promoters of creativity and cognition about the things we create, installing human as the bond of the interrelations between designing and making.
keywords	Human machine interaction; computational making; machine learning; digital design and fabrication
series	CAADRIA
email
last changed	2022/06/07 08:00

For more results click below: