Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_260
id	acadia16_260
authors	Schleicher, Simon; La Magna, Riccardo
year	2016
title	Bending-Active Plates: Form-Finding and Form-Conversion
doi	https://doi.org/10.52842/conf.acadia.2016.260
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 260-269
summary	With this paper, the authors aim to contribute to the discourse on bending-active structures by highlighting two different design methods, form-finding and form-conversion. The authors compare the two methods through close analysis of bending-active plate structures, discussing their advantages and disadvantages based on three built case studies. This paper introduces the core ideas behind bending-active structures, a rather new structural system that makes targeted use of large elastic deformations to generate and stabilize complex geometrical forms based on initially planar elements. Previous research has focused mainly on form-finding. As a bottom-up approach, it begins with flat plates and recreates the bending and coupling process digitally to gradually determine the final shape. Form-conversion, conversely, begins with a predefined shape that is then discretized by strategic surface tiling and informed mesh subdivision, and which in turn considers the geometrical and structural constraints given by the plates. The three built case studies exemplify how these methods integrate into the design process. The first case study applies physical and digital form-finding techniques to build a chaise lounge. The latter two convert a desired shape into wide-spanning constructions that either weave multiple strips together or connect distant layers with each other, providing additional rigidity. The presented case studies successfully prove the effectiveness of form-finding and form-conversion methods and render a newly emerging design space for the planning, fabrication, and construction of bending-active structures.
keywords	bending-active structures, form-conversion, form-finding, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	caadria2023_312
id	caadria2023_312
authors	Wu, Fangning
year	2023
title	Assessing Spatial Accessibility to Public Facilities for Vulnerable People towards 15-Minute City in Hong Kong
doi	https://doi.org/10.52842/conf.caadria.2023.1.535
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 535–544
summary	Due to the COVID-19 pandemic, people started to rely more on their communities and attach great importance to the accessibility of public facilities at a hyperlocal level. The 15-Minute City concept, first put forth by Carlos Moreno in 2016, gradually gained popularity worldwide during the age of pandemics. This human-centric concept aims to build complete neighbourhoods that meet the daily needs of residents within 15 minutes by using non-motorized transport. However, few studies focus on vulnerable groups such as children and the elderly for the assessment of 15-Minute City. Therefore, this paper provides an assessment framework for spatial accessibility to public facilities for vulnerable people from the perspective of 15-Minute City. It is measured in three aspects: spatial distribution characteristics, service population ratio and number of facilities through the comparison between Sham Shui Po and Tin Shui Wai in Hong Kong. The result shows that the accessibility to public facilities needed in daily life for children in Sham Shui Po and Tin Shui Wai is relatively reasonable, while the accessibility for the elderly needs to be improved. The research can provide references for evaluating and optimizing spatial planning to promote health and well-being in Hong Kong and other cities.
keywords	15-Minute City, Vulnerable people, Spatial accessibility, Network analysis, Human-centric, New town
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ecaade2016_096
id	ecaade2016_096
authors	Chen, Nai Chun, Nagakura, Takehiko and Larson, Kent
year	2016
title	Social Media as Complementary Tool to Evaluate Cities - Data Mining Innovation Districts in Boston
doi	https://doi.org/10.52842/conf.ecaade.2016.2.447
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 447-456
summary	High tech industries are playing an important role in the economic development in the United States. While some cities are shrinking, the "innovation" cities are growing. The attributes that cause some cities to successfully become innovative is a very relevant 21st century topic and will be investigated here.Previous work conduct city analysis through conventional government GIS or census data but such analyses do not answer questions about the perception of citizens inhabiting the city, and the activities they conduct. The novelty of this current project is to make use of large-scale bottom-up data available from social media. Several social media sources-CrunchBase, Twitter, Yelp, and Flickr- were data mined pertaining to four innovation districts in Boston. We found that the success of innovation districts in Boston were correlated with several important variables: the most successful districts tended to occur near research institutions, in very "mixed use" areas, and were unexpectedly not correlated with land and labor prices, unlike technology districts in the past. Based on our study, we make recommendations for the urban design that cities should put in place to increase the potential for "innovation".
wos	WOS:000402064400044
keywords	Smart Cities; Social Media; Innovation District; Spatial Analysis; Data Mining; Natural Language Processing
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2016_007
id	ascaad2016_007
authors	Elsayed, Mohamed; Osama Tolba and Ahmed Elantably
year	2016
title	Architectural Space Planning Using Parametric Modeling - Egyptian National Housing Project
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 45-54
summary	The Egyptian government resorts to prototype housing for low-income citizens to meet the growing demand of the housing market. The problem with the prototype is that it does not meet specific needs. Consequently, users make modifications to the prototype without professional intervention because of the high cost. This paper discusses an automatic multi-stories space planning tool that helps low-income citizens to modify their prototype housing provided by the government. Social, spatial and functional design aspects were set in the original design prototype by an architect. The proposed tool simulates spaces spatial locations in the original design by simulating the analogy of mechanical springs through an interactive simulation of a parametric model. The authors developed the used algorithm in the generative design tool Grasshopper and the live physics engine Kangaroo, both working within the Rhino 3D environment. The algorithm has two versions, one-floor level version and two floors version targeting the wealthier users. Results indicate that this tool integrates with the exploratory nature of the design process even for non-professional users. The authors designed a tool that will help the users to study the effect of the desired modifications against the originally provided prototype, it also makes it easier for users to express their requirements to a professional designer, conserving time and financial cost.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	caadria2016_487
id	caadria2016_487
authors	Shin, Jihye; Inhan Kim and Jungsik Choi
year	2016
title	Development of the Integrated Management Environment of BIM Property Information for BIM-based Sustainable Design
doi	https://doi.org/10.52842/conf.caadria.2016.487
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 487-496
summary	With the growing responsibility for the environmental load of building, the demand for sustainable building is increasing. Sus- tainable design requires an enormous amount of information, and most of this information can be captured by Building Information Modelling (BIM). In this context, the management of information in a BIM object as a container for exchanging information is necessary for analyzing a building’s sustainability. However, there are problems in generating a reliable sustainability simulation model from BIM, such as the inefficiency of required information and low accessibility to a proper BIM object. In order to provide a new approach for generating a reliable sustainability simulation model in a BIM-based design pro- cess, this study suggests the integrated management environment of the property information of a BIM object.
keywords	Building information modelling (BIM); BIM object; energy analysis; sustainable design; property information
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2016_725
id	caadria2016_725
authors	Tong, Ziyu and Ronglou Zhou
year	2016
title	Design and Fabrication of 3D Reciprocal Frame Structure
doi	https://doi.org/10.52842/conf.caadria.2016.725
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 725-734
summary	Reciprocal frame structure is a special type of spatial struc- ture, which consist of elongated elements. The elements support each other along their span, compose a stable geometrical configuration without any clear structural hierarchy. Based on the morphology, the reciprocal frame could be categorized to 1D, 2D, and 3D. Compared to 1D and 2D, 3D reciprocal frame presents some novel features. It shows a growing pattern with some simple rules. Even with the same rule, 3D reciprocal frame could grow up to different form. It’s a typi- cal process of bottom-up which implies a considerable wealth of pos- sibilities. Study on the 3D reciprocal frame gives the potential for achieving novel and complex forms. With the restriction of the cate- gory of 3D reciprocal frame, the paper summarized the characteristics of the frame as growth, regularity, and spatiality. And the structure should be repeated, simulated, and constructed. The paper also ex- tracted three basic factors - growth rule, initial form, and bar size. Through the simulation experiments with different factors, the rela- tionships between the frame shape and the factors were established. At the end, a full-scale model validates the feasibility of the growth result of 3D reciprocal frame.
keywords	Reciprocal frame structure; spatial structure; 3-dimension; fabrication; rule-based
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2016_ws-dheritage
id	ecaade2016_ws-dheritage
authors	Di Mascio, Danilo, Kepczynska-Walczak, Anetta and , Nicholas Webb
year	2016
title	Contextualized Digital Heritage Workshop - Oulu
doi	https://doi.org/10.52842/conf.ecaade.2016.1.059
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 59-62
summary	Constructions pertaining to built heritage represent precious material and cultural resources to be studied and preserved for present and future generations. In recent years, this built heritage is increasingly understood, documented, managed, analysed and disseminated through the application of several digital technologies; this trend has created one of the main research areas in architecture, called Digital Heritage. Digital technologies open up alternative and new possibilities in the study of tangible and intangible features of built heritage. This workshop aims to create a space to allow scholars to discuss, share and apply their knowledge in a digital heritage exercise contextualized in Oulu.
wos	WOS:000402063700005
keywords	Digital Heritage; Context; Built Heritage; Digital Technologies
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	acadia16_214
id	acadia16_214
authors	Schwartz, Mathew
year	2016
title	Use of a Low-Cost Humanoid for Tiling as a Study in On-Site Fabrication: Techniques and Methods
doi	https://doi.org/10.52842/conf.acadia.2016.214
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 214-223
summary	Since the time architecture and construction began embracing robotics, the pre-fab movement has grown rapidly. As the possibilities for new design and fabrication emerge from creativity and need, the application and use of new robotic technologies becomes vital. This movement has been largely focused on the deployment of industrial-type robots used in the (automobile) manufacturing industry for decades, as well as trying to apply these technologies into off-site building construction. Beyond the pre-fab (off-site) conditions, on-site fabrication offers a valuable next step to implement new construction methods and reduce human work-related injuries. The main challenge in introducing on-site robotic fabrication/construction is the difficulty in calibrating robot navigation (localization) in an unstructured and constantly changing environment. Additionally, advances in robotic technology, similar to the revolution of at-home 3D printing, shift the ownership of modes of production from large industrial entities to individuals, allowing for greater levels of design and construction customization. This paper demonstrates a low-cost humanoid robot as highly customizable technology for floor tiling. A novel end-effector design to pick up tiles was developed, along with a localization system that can be applied to a wide variety of robots.
keywords	humanoid robot, digital fabricaiton, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ascaad2016_058
id	ascaad2016_058
authors	Assassi, Abdelhalim; Djemaa Benmechirah and Rachida Samai
year	2016
title	Visibility Map - Exploratory study of urban planning for future city design
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 579-588
summary	Through space we can read the acts and the daily activities of human being and, we can also understand different interactions within any social unit. This paper explain how specially the space type can interpret why the human being derives to a negative behavior like "Crime". So, in this study we adopt the visibility approach which is developed by the laboratory of space syntax (UCL), and which makes a sense for the link between the space design and its use and its positive or negative social consequences in the future. Then, the purpose of this paper is to present the importance of the use of visibility map which can also be an outlook approach for detecting potential hot-spots in urban planning designs specially of new cities, for avoiding the negative using of urban spaces like "Crime" in the future. The case of study is the new city of Ali Mendjeli (Constantine - Algeria), the capital of the East of Algeria known by a very fast demographic and urban growth. After analyzing a central urban neighborhood of this city using Depthmap, we found thirty-four hot-spots which can be appropriate spaces for the exercise of crime in the future, and we found that this point was downplayed in the urban planning designs before the realization of Ali Mendjeli new city.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	sigradi2016_686
id	sigradi2016_686
authors	Caldeira, Keila Fernanda Gomes; Pinheiro, Rafael Lemieszek
year	2016
title	Cidade Dinâmica: Ferramentas digitais em prol do planejamento urbano [Ferramentas digitais em prol do planejamento urbano]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.544-549
summary	Considering the variety of digital tools available nowadays and the growth of their possible uses in architecture and urbanism,, we propose to study their potential as auxiliary tools in the process of urban design, based on their ability to help understand and take part in complex projects that are currently out of reach, technically or literally, to the general population. This article analyzes the origins and the theoretical framework behind urban planning in the Brazilian contemporary cities, currently based on Euclidean Zoning, and the processes of connecting contributions from participatory process and digital tools into city-planning level decisions. attempting to have a closer look into the questions behind a new proposal of planning, on a non-euclidean way, where the urban parameters could be evaluated and defined individually for each plot, based on a set of parameters that vary gradually and are dynamic in nature.
keywords	Euclidean planning; Participatory proccess; Digital tools; Parametric urban planning; Computational urbanism
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ijac201614202
id	ijac201614202
authors	Jutraz, Anja and Julie Le Moine
year	2016
title	Breaking out: New freedoms in urban (re)design work by adding immersive environments
source	International Journal of Architectural Computing vol. 14 - no. 2, 103-118
summary	Nowadays, urban planning and urban design are facing big changes in the use of different digital tools. Reaching out and engaging citizens and other stakeholders in urban design process are significant for good practice. Main problem discussed in this article is the lack of suitable tools/interfaces for instant collaboration between government, profession, and public. Article focuses on immersive environments, as full immersion could offer better notion of different proposals of urban design. As a case study, Immersive Terf is chosen; more exactly, article focuses on new approach and new development of tool Urban Redesign Terf. Deep immersive collaboration on design could free participant’s mind and increase level of freedom in design/planning process. Immersive environments have already been used in building information modeling (BIM) managment, but innovation part, presented here, are technological: significant changes in the software and walk-through big models, which is the base for urban design and urban planning process.
keywords	Urban planning, immersive environments, virtual worlds, digital tools, public participation
series	journal
last changed	2016/06/13 08:34

_id	cf2017_111
id	cf2017_111
authors	Kepczynska-Walczak, Anetta; Pietrzak, Anna
year	2017
title	An Experimental Methodology for Urban Morphology Analysis
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 111.
summary	The paper presents results of a research conducted in 2015 and 2016 at Lodz University of Technology. It proposes a purpose and context fit approach towards the automation of urban data generation based on GIS tools and New Urbanism typologies. First, background studies of methods applied in urban morphology analysis are revealed. Form-Based Code planning, and subsequently Transect-Based Code are taken into account. Then, selected examples from literature are described and discussed. Finally, the research study is presented and the outcomes compared with more traditional methodology.
keywords	GIS, Urban morphology, Spatial analysis, Decision support systems, Urban design, Data analytics, Modelling and simulation
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	ecaade2016_123
id	ecaade2016_123
authors	Puusepp, Renee, Cerrone, Damiano and Melioranski, Martin
year	2016
title	Synthetic Modelling of Pedestrian Movement - Tallinn case study report
doi	https://doi.org/10.52842/conf.ecaade.2016.2.473
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 473-481
summary	This paper builds towards the argument that pedestrian traffic in the city can be successfully simulated with agent-based computational models if pedestrians' movement patterns are appropriately studied first. Furthermore, such simulation models, when finely calibrated and supported by onsite observations, allow planners to evaluate different urban design scenarios.We present a pilot study carried out in the centre of Tallinn, and discuss a way of how pedestrian movement simulations can be conceived. In the pilot study we recorded some 120 traces of pedestrians' movement and developed a prototype of an agent-based computational model to simulate this movement. Additionally we investigated the possibility of including solar analysis into the computational model. Already this short exercise offered us some interesting insights into how certain spatial qualities and features can drive pedestrian traffic making urban walkers to verge off the shortest routes. The pilot study was carried out in the context of the High Street project [1] for turning the centre of Tallinn into more pedestrian friendly area by redesigning urban space, calming vehicular traffic and creating new opportunities for businesses to flourish.
wos	WOS:000402064400047
keywords	agent-based model; urban analysis; pedestrian simulation; movement patterns; solar analysis
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	acadia23_v1_122
id	acadia23_v1_122
authors	Crawford, Assia
year	2023
title	Mycelium Making: An exploration in Growing Modular Interiors
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 122-127.
summary	The project was developed as part of an MArch Architecture design studio that looked at emerging bio-degradable living materials in the form of mycelium bio-composites as a way of manufacturing temporary structures. The project introduced students to laboratory methods for material development and bio-material cultivation. Students were asked to consider the implications of designing with a material that has agency and needs. The studio explored what it means to “make kin” (Haraway 2016) on a planet that has reached a tipping point. It approached the topic from the assumption that the breakdown of existing economic models and resource scarcity offers potent ground for new forms of space making to emerge. The studio looked to nature’s ability to respond to environmental stimuli and design constraints. Students harnessed advances in our scientific understanding to cultivate an architectural language that captures the transient and unstable nature of this new family of biomaterials
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2016_839
id	caadria2016_839
authors	Ikeda, Yasushi; Keisuke Toyoda and Tsukasa Takenaka
year	2016
title	The Pedagogical Meanings of an Experimental Full-Size Mock-Up of Computational Design
doi	https://doi.org/10.52842/conf.caadria.2016.839
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 839-848
summary	Skill in the use of digital media tools is growing more im- portant in architectural education. However parametric objects in computational geometry or digital fabrication as an assist for project- based learning are not in themselves sufficient to extract the potential of computational design. When we consider the performance of a de- sign, or the fundamental purpose of parametric design toolsets in the contemporary context, education must act as a connecter to the ambi- tion of global sustainability. With regards to the advantage of compu- tational methodologies, students benefit by developing a holistic vi- sion of non-standardized assembly technology. This is particularly useful in overcoming problems of mass production, and with the crea- tion of interactive technology that is incrementally adaptable in the process of answering to unpredictable change. In this context, a com- prehensive understanding of digital tools as part of a holistic and eco- logical architectural design mindset is crucial for future designers. Exploring effective ways to guide students in the development of this capability is therefore important. This paper documents a recent effort in this direction through examples of education within a digital design studio. As a conclusion the paper discusses important factors in the encouragement of students as they develop a comprehensive under- standing of the use of digital design culture.
keywords	Digital design studio; full-size mock-up; comprehensive capability; practical performance; project-based learning
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2016_ws-afuture
id	ecaade2016_ws-afuture
authors	Kim, Jaehwan, Schwartz, Mathew and Zarzycki, Andrzej
year	2016
title	The Wave of Autonomous Mobility:Architecture Facilitating Indoor Autonomous Navigation
doi	https://doi.org/10.52842/conf.ecaade.2016.1.053
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 53-58
summary	When considering architectural and urban responses to autonomous mobility, it becomes evident that the future strategies will have to include a significant transformation to the built environment, particularly the ways it operates and interacts with inhabitants. Designers will not only need to rethink formal and functional arrangements but also, and perhaps primarily, consider the environment--buildings and cities--as active and equal actors with adaptive and autonomous behaviors similarly to those people or self-driving cars manifest. This paper discusses initial planning and design strategies for the integration of autonomous vehicles and other forms of autonomous mobility into the built environment. Specifically, it looks into necessary steps required to develop infrastructure to a level of autonomy that can facilitate a next generation of wayfinding and mobility. A growing research area into smaller personal mobility vehicles that would revolutionize elderly and disabled mobility brings to the light the major technical challenges present in current building infrastructure.
wos	WOS:000402063700004
keywords	Autonomous Vehicle; Navigation; Localization; Smart Buildings; Smart Infrastructure
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2016_745
id	caadria2016_745
authors	Suzuki E., Seiichi
year	2016
title	Extruded Architectures: Grading weight-to-strength ratio of cement based materials through extrusion techniques
doi	https://doi.org/10.52842/conf.caadria.2016.745
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 745-754
summary	In recent years, a growing research agenda on the subject of additive manufacturing for architectural design has been established on the basis of jetting and extrusion technology. While jetting pro- vides enough flexibility to print multiple digital materials in a single run, extrusion has proven to be the most viable technique for large- scale and on-site manufacturing. Because major contributions of both research lines cannot be combined due to technological differences, special attention has been devoted towards the development of print- ing strategies that could approximate similar material flexibility of jet- ting by means of extrusion techniques. In this context, this paper pre- sents a computational design methodology for architectural components that enables grading weight-strength ratio of cement based materials through extrusion. Built upon the integration of mod- elling, analysis and fabrication, such methodology allows to optimize material distribution and geometric definition on the basis of physical and fabrication constraints. A case study is presented for describing the design processes of a circular column and the fabrication of a sec- tion it.
keywords	Additive manufacturing; cement based materials; computational design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_280
id	ecaade2017_280
authors	Baldissara, Matteo, Perna, Valerio, Saggio, Antonino and Stancato, Gabriele
year	2017
title	Plug-In Design - Reactivating the Cities with responsive Micro-Architectures. The Reciprocal Experience
doi	https://doi.org/10.52842/conf.ecaade.2017.2.571
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 571-580
summary	Every city has under utilized spaces that create a series of serious negative effects. Waiting for major interventions, those spaces can be reactivated and revitalized with soft temporary projects: micro interventions that light up the attention, give new meaning and add a new reading to abandoned spaces. We can call this kind of operations "plug-in design", inheriting the term from computer architecture: interventions which aim to involve the citizens and activate the environment, engage multiple catalyst processes and civil actions. Plug-in design interventions are by all meanings experimental, they seek for interaction with the users, locally and globally. Information Technology - with its parametric and site-specific capabilities and interactive features - can be instrumental to create such designs and generate a new consciousness of the existing environment. With this paper we will illustrate how two low-budget interventions have re-activated a forgotten public space. Parametric design with a specific script allowing site-specific design, materials and structure optimization and a series of interactive features, will be presented through Reciprocal 1.0 and Reciprocal 2.0 projects which have been built in 2016 in Italy by the nITro group.
keywords	reciprocal frame; parametric design; responsive technology; plug-in design; interactivity; re-activate
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia16_164
id	acadia16_164
authors	Braumann, Johannes; Stumm, Sven; Brell-Cokcan, Sigrid
year	2016
title	Towards New Robotic Design Tools: Using Collaborative Robots within the Creative Industry
doi	https://doi.org/10.52842/conf.acadia.2016.164
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 164-173
summary	This research documents our initial experiences of using a new type of collaborative, industrial robot in the area of architecture, design, and construction. The KUKA LBR-iiwa differs from common robotic configurations in that it uses seven axes with integrated force-torque sensors and can be programmed in the Java programming language. Its force-sensitivity makes it safe to interact with, but also enables entirely new applications that use hand-guiding and utilize the force-sensors to compensate for high tolerances on building sites, similar to how we manually approach assembly tasks. Especially for the creative industry, the Java programming opens up completely new applications that would have previously required complex bus systems or industrial data interfaces. We will present a series of realized projects that showcase some of the potential of this new type of collaborative, safe robot, and discuss the advantages and limitations of the robotic system.
keywords	material tolerances, individualized production, iiwa, assembly, visual robot programming, collaborative robots
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

For more results click below: