Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 106

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2016_381
id	sigradi2016_381
authors	Langenhan, Christoph; Petzold, Frank
year	2016
title	Views on architecture: Different abstraction layers of building information imply special working methods and interaction metaphors to support a variety of courses of action
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.584-589
summary	In the early design phases, designers usually only have a vague idea of the building they are designing. Different aspects of potential design variants need to be tested, assessed and compared with one another. The ability to consider design variants in different ways – based on floor plan, schematic concept, section or 3D visualization, for example – helps to identify problems as well as reveal areas of potential. This paper describes software prototypes developed to help designers input and present different levels of abstraction. The transformations between these levels of abstraction reveal new solutions and make designers aware of issues that need to be considered during the design process.
keywords	Semantic fingerprint, Building Information Modeling, HCI, retrieval
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_217
id	ecaade2016_217
authors	Klerk, Rui de and Beir?o, José
year	2016
title	Ontologies and Shape Grammars - A Relational Overview Towards Semantic Design Systems
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 305-314
doi	https://doi.org/10.52842/conf.ecaade.2016.2.305
wos	WOS:000402064400030
summary	This paper provides an overview on the relation between computational ontologies and shape grammars regarding the development and production of multi-purpose Semantic Design Systems. The objective of the author's ongoing research is to assist the creation of generative design systems, applicable to design processes in general. Shape grammar rules and ontologies in these systems will be focusing on abstract, generic rules and generic descriptions. When combined through contextually specified relations, these assume semantic expressions and should be able to produce meaningful results.We collect here a short state of the art of the research developed in the fields of architecture, urbanism and computer science in the past ten years regarding the use of knowledge bases (ontologies) combined with generative design systems (with a particular focus on shape grammars). We expect to provide both insight about architectural and urban typologies and the production of meaningful designs using automated generative design systems.
keywords	Ontologies; Shape Grammars; Semantic Design Systems; Architectural Design; Urban Planning
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia20_238
id	acadia20_238
authors	Zhang, Hang
year	2020
title	Text-to-Form
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 238-247.
doi	https://doi.org/10.52842/conf.acadia.2020.1.238
summary	Traditionally, architects express their thoughts on the design of 3D architectural forms via perspective renderings and standardized 2D drawings. However, as architectural design is always multidimensional and intricate, it is difficult to make others understand the design intention, concrete form, and even spatial layout through simple language descriptions. Benefiting from the fast development of machine learning, especially natural language processing and convolutional neural networks, this paper proposes a Linguistics-based Architectural Form Generative Model (LAFGM) that could be trained to make 3D architectural form predictions based simply on language input. Several related works exist that focus on learning text-to-image generation, while others have taken a further step by generating simple shapes from the descriptions. However, the text parsing and output of these works still remain either at the 2D stage or confined to a single geometry. On the basis of these works, this paper used both Stanford Scene Graph Parser (Sebastian et al. 2015) and graph convolutional networks (Kipf and Welling 2016) to compile the analytic semantic structure for the input texts, then generated the 3D architectural form expressed by the language descriptions, which is also aided by several optimization algorithms. To a certain extent, the training results approached the 3D form intended in the textual description, not only indicating the tremendous potential of LAFGM from linguistic input to 3D architectural form, but also innovating design expression and communication regarding 3D spatial information.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	sigradi2016_448
id	sigradi2016_448
authors	Afsari, Kereshmeh; Eastman, Charles M.; Shelden, Dennis R.
year	2016
title	Data Transmission Opportunities for Collaborative Cloud-Based Building Information Modeling
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.907-913
summary	Collaboration within Building Information Modeling process is mainly based on file transfer while BIM data being exchanged in either vendor specific file formats or neutral format using Industry Foundation Classes (IFC). However, since the Web enables Cloud-based BIM services, it provides an opportunity to exchange data via Web transfer services. Therefore, the main objective of this paper is to investigate what features of Cloud interoperability can assist a network-based BIM data transmission for a collaborative work flow in the Architecture, Construction, and Engineering (AEC) industry. This study indicates that Cloud-BIM interoperability needs to deploy major components such as APIs, data transfer protocols, data formats, and standardization to redefine BIM data flow in the Cloud and to reshape the collaboration process.
keywords	BIM; Cloud Computing; Data Transmission; Interoperability; IFC
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_124
id	acadia16_124
authors	Ferrarello, Laura
year	2016
title	The Tectonic of the Hybrid Real: Data Manipulation, Oxymoron Materiality, and Human-Machine Creative Collaboration
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 124-129
doi	https://doi.org/10.52842/conf.acadia.2016.124
summary	This paper describes the latest progress of the design platform Digital Impressionism (DI), created by staff and students in the Information Experience Design programme at the Royal College of Art in London. DI aims to bridge human creative thinking with machine computation, under the theoretical method/concept of oxymoron tectonic. Oxymoron tectonic describes the process under which hybrid materiality, that is the materiality created between the digital and the physical, takes form in human-machine creative interactions. The methodology intends to employ multimaterial 3D printers in combination with data manipulation (a process that gives data physical substance), pointclouds, and the influence of intangible environmental data (like sound and wind) to model physical forms by interfacing digital and physical making. In DI, modeling is a hybrid set of actions that take place at the boundary of the physical and digital. Through this interactive platform, design is experienced as a complex, hybrid process, which we call a digital tectonic; forms are constructed via a creative feedback loop of human engagement with nonhuman agents to form a creative network of sustainable and interactive design and fabrication. By developing a mutual understanding of design, machines and humans work together in the process of design and making.
keywords	human-computer interaction and design, craft in design computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2016_119
id	ecaade2016_119
authors	Koenig, Reinhard and Varoudis, Tasos
year	2016
title	Spatial Optimisations - Merging depthmapX, spatial graph networks and evolutionary design in Grasshopper
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 249-254
doi	https://doi.org/10.52842/conf.ecaade.2016.2.249
wos	WOS:000402064400024
summary	In the Space Syntax community, the standard tool for computing all kinds of spatial graph network measures is depthmapX (Varoudis, 2012). The process of evaluating many design variants of networks is relatively complicated, since they need to be drawn in a separated CAD system, exported and imported in depthmapX via dxf file format. This procedure disables a continuous integration into a design process. Furthermore, the standalone character of depthmapX makes it impossible to use its network centrality calculation for optimization processes. To overcome this limitations, we present in this paper the first steps of experimenting with a Grasshopper component (Varoudis, 2016) that can access the functions of depthmapX and integrate them into Grasshopper/Rhino3D. Here the component is implemented in a way that it can be used directly for an evolutionary algorithm (EA) implemented in a Python scripting component in Grasshopper.
keywords	Space Syntax; Evolutionary Algorithm; Grasshopper; Python; DepthmapX; Optimization
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia16_184
id	acadia16_184
authors	Vasey; Lauren; Long Nguyen; Tovi Grossman; Heather Kerrick; Danil Nagy; Evan Atherton; David Thomasson; Nick Cote; David Benjamin; George Fitzmaurice; Achim Menges
year	2016
title	Collaborative Construction: Human and Robotic Collaboration Enabling the Fabrication and Assembly of a Filament-Wound Structure
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 184-195
doi	https://doi.org/10.52842/conf.acadia.2016.184
summary	In this paper, we describe an interdisciplinary project and live-exhibit that investigated whether untrained humans and robots could work together collaboratively towards the common goal of building a large-scale structure composed out of robotically fabricated modules using a filament winding process. We describe the fabrication system and exhibition setup, including a custom end effector and tension control mechanism, as well as a collaborative fabrication process in which instructions delivered via wearable devices enable the trade-off of production and assembly tasks between human and robot. We describe the necessary robotic developments that facilitated a live fabrication process, including a generic robot inverse kinematic solver engine for non-spherical wrist robots, and wireless network communication connecting hardware and software. In addition, we discuss computational strategies for the fiber syntax generation and robotic motion planning which mitigated constraints such as reachability, axis limitations, and collisions, and ensured predictable and therefore safe motion in a live exhibition setting. We discuss the larger implications of this project as a case study for handling deviations due to non-standardized materials or human error, as well as a means to reconsider the fundamental separation of human and robotic tasks in a production workflow. Most significantly, the project exemplifies a hybrid domain of human and robot collaboration in which coordination and communication between robots, people, and devices can enhance the integration of robotic processes and computational control into the characteristic processes of construction.
keywords	machin vision, cyber-physical systems, internet of things, robotic fabrication, human robot collaboration, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
wos	WOS:000402063700058
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_047
id	ascaad2016_047
authors	Algeciras-Rodríguez, José
year	2016
title	Trained Architectonics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 461-468
summary	The research presented here tests the capacity of artificial-neural-network (ANN) based multi-agent systems to be implemented in architectural design processes. Artificial Intelligence algorithms allow for a new approach to design, taking advantage of its generic functioning to produce meaningful outcomes. Experimentation within this project is based on Self-Organizing Maps (SOMs) and takes advantage of its behavior in topology to produce architectural geometry. SOMs as full stochastic processes involve randomness, uncertainty and unpredictability as key features to deal with during the design process. Following this behavior, SOMs are used to transmit information, which, instead of being copied, is reproduced after a learning (training) process. Pre-existent architectural objects are taken as learning models as they have been considered masterpieces. In this context, by defining the SOM input set, masterpieces become measurement elements and can be used to set a distance to the new element position in a comparatistic space. The characteristics of masterpieces get embedded within the code and are transmitted to 3D objects. SOM produced objects from a population with shared characteristics where the masterpiece position is its probabilistic center point.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2016_343
id	caadria2016_343
authors	Asriana, Nova and Aswin Indraprastha
year	2016
title	Making Sense of Agent-based Simulation: Developing Design Strategy for Pedestrian-centric Urban Space
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 343-352
doi	https://doi.org/10.52842/conf.caadria.2016.343
summary	This study investigates the relationships of field observa- tion, multi-agent simulation and space-syntax theory in spatial config- uration for developing design strategy for a case study, a tourist hub area in Musi Riverside, Palembang. Having such potential advantage and to tackle existing social and urban issues, our study developed a design approach based on multi-agent simulation enhanced by space syntax theory. The goal of this study is a deep understanding of multi agent simulation through mechanism of validation using field obser- vation and by taking into account the existing urban features. The purpose is to develop design strategy of pedestrian-centric urban space to be functioned as a tourist hub based on computational modelling. Following the paths result of pedestrian flow by multi-agents simula- tion, we elaborated the analysis of facility programming by means of Space Syntax theory. It shows the ranking of facility programs based on their relative connectivity and integration. By merging this result, it assembles programs and their circulation spaces by means of compu- tational simulation. Experimenting in both fields show a novel ap- proach for pedestrian-centric design in urban scale, particularly since behavioural models rarely used in early stage of design process. It shows that multi-agent simulation should be coupled with field obser- vation.
keywords	Multi-agents simulation; network analysis; Space Syntax theory; design strategy; urban space
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2016_589
id	caadria2016_589
authors	Grigoriadis, Kostas
year	2016
title	Translating Digital to Physical Gradients
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 589-598
doi	https://doi.org/10.52842/conf.caadria.2016.589
summary	As the practice of using notations to translate from two to three-dimensions is becoming superseded by the direct relaying of building information digitally, the separation between designing and building is diminishing. A key aspect in lessening further this divi- sion, is heterogeneous materiality that supersedes component thinking and effectively tectonics. Being an embodiment of the redundancies of tectonic assembly, a curtain wall detail has been redesigned with a heterogeneous and continuous multi-material using CFD. The main research problem following this redesign has been the conversion of material data from the CFD program into a 3D-printable format and in order to achieve a closer linkage between design and building. This has been pursued by initially converting the fused material parameters into fluid weight data and eventually into RGB colour values. The re- sulting configuration was output initially as a multi-colour print and effectively fabricated in a multi-material.
keywords	Multi-materials; CFD; 3D-printing; autography
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201614307
id	ijac201614307
authors	Wu, Yi-Sin; Teng-Wen Chang, and Sambit Datta
year	2016
title	HiGame: Improving elderly well-being through horticultural interaction
source	International Journal of Architectural Computing vol. 14 - no. 3, 263-276
summary	Family support is the key to the well-being problems of elderly. Unlike health problem, mental problem often depends on the social network of elderly. How to enhance elderly well-being problems will become how to increase the interaction between elderly and their family. Horticultural interaction proves to be an effective but smooth impact on improving well-being problems of elderly. By designing a horticultural interaction game for motivating or invoking the communication between elderly and their family members, the prototype is developed based on the framework of behavior setting and semi-fixed features. Three groups of games, physical games, virtual games, and spatial interaction games, are analyzed and 14 cases are studied and evaluated for the features required. Particularly, spatial interaction games with both physical and virtual games are brought into scope, and HiGame (Horticultural Interaction Game, hi game) is developed. Five scenarios using sensor network and mobile interface are unleashed and tested in an experiment with two sets of elderly family participants. HiGame has connection to both physical and virtual spaces for elderly and their family. Elderly interact with distant family through physical watering, weeding, and fertilizing. And distant family use virtual game to support elderly. The interaction process can be further enhanced with the following: (1) separating the tasks for elderly and family ends individually and then cooperating together might enforce the intergenerational interaction and reflection on cooperation in the gaming process; (2) the connection among each scenario can be further developed into a different process, such as competition of different members for helping the elderly to complete certain task might motivate the game experience further.
keywords	Elderly, co-existing space, intergeneration interaction, behavior setting
series	journal
last changed	2016/10/05 08:21

_id	caadria2016_755
id	caadria2016_755
authors	Loh, Paul; David Leggett and Timothy Cameron
year	2016
title	Smart assembly in digital fabrication: designing workflow
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 755-764
doi	https://doi.org/10.52842/conf.caadria.2016.755
summary	Digital fabrication project in academia has produced many grounds for experimentation. In recent years, techniques have also been tested extensively in practice within commercial project setting. This gives rise to an emerging breed of architectural practices whose work is increasingly centred on resolution of complex geometry to re- alizable projects. The resolution of parametrically driven design to production projects requires a different workflow, as often the com- pressed timeframe and budget requires the parametric model to cope with multiple streams of construction output as well as utilize the model in concurrent design processes. This paper examines a com- mercial project as case study to explore the abstraction, reduction and dissemination of information within a digital fabrication workflow. In this project, digital fabrication is deployed to reduce risk; mainly in manufacturing and its lead time. The research reveals how metadesign process at an early stage of the project can contribute to increase effi- ciency of the parametric model as well as delivering multiple streams of information for all the collaborators: architects, fabricators and builders. The team designed the assembly procedure into the paramet- ric workflow to facilitate off-site and on-site assembly. This is possi- ble through imbedding ‘smart’ detailing and structuring information with the workflow. The paper concludes by reflecting on the work- flow and asks if a metadesign driven fabrication workflow can create a more holistic approach to digital fabrication. The outcome of the case study is just one instance of the parametric machine that is devel- oped from an understanding of assembly process. This paper responds to the theme of continuous designing, through looking at digital fabri- cation as co-emergence of design procedure and practice.
keywords	Digital fabrication; construction; design workflow
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2016_144
id	ecaade2016_144
authors	Wendell, Augustus, Altin, Burcak Ozludil and Thompson, Ulysee
year	2016
title	Prototyping a Temporospatial Simulation Framework:Case of an Ottoman Insane Asylum
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 485-491
doi	https://doi.org/10.52842/conf.ecaade.2016.2.485
wos	WOS:000402064400048
summary	Effectively communicating the history of a complex building site using only conventional presentation techniques can be limiting. It is a challenge to present temporal changes in the site simultaneously within a spatial framework. Whereas 2D drawings typically used in architectural historical scholarship are many times cleaned abstractions, 3D models might create an illusion of "recreated reality." Both representation types distance the reader from the primary sources rather than being a mechanism to bring the reader closer to the sources. This paper reports on an interactive simulation of a fin-de-siecle Ottoman insane asylum in Istanbul. Our response to these challenges incorporates to the simulation both the temporal aspect (spanning the life of the asylum and the daily life within) and primary documents by using temporally aware 3D models and keyed descriptive markers for building programming.
keywords	Unity3D; Simulation; Digital Humanities; Game Engine; Temporal; Architectural History
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_239
id	ecaade2016_239
authors	Janssen, Patrick, Chen, Kian Wee and Mohanty, Akshata
year	2016
title	Automated Generation of BIM Models
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 583-590
doi	https://doi.org/10.52842/conf.ecaade.2016.2.583
wos	WOS:000402064400059
summary	In early stages of architectural design, highly simplified minimal models are often preferred while in the later stages maximal Building Information Models (BIM) are required that include the relevant information for detailed design documentation. This research focuses on the transition from minimal to maximal models and proposes a semi-automated workflow that consist of two main steps: analysis and templating. The analysis step starts with the minimal geometric model and decorates this model with a set of semantic and topological attributes. The templating step starts the decorated model and generates a transitional BIM model which can then be readily altered and populated with high resolution building information. A demonstration of two test cases shows the feasibility of the approach.
keywords	BIM; parametric modelling; interoperability
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_087
id	ecaade2016_087
authors	Kepczynska-Walczak, Anetta
year	2016
title	Building Information Modelling - the Quest for Simplicity Within Complexity
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 299-308
doi	https://doi.org/10.52842/conf.ecaade.2016.1.299
wos	WOS:000402063700034
summary	There is a common expectation of technology to better help us manage the complexity of life and to simplify our daily tasks. However, these developments also raise a question of whether design technologies encourage complexity at the expense of simplicity in the design process. Does computation cause complexity? Or does it enable simplicity? This paper aims to answer these key questions, posed as the main focus of the eCAADe 2016 Conference, by confronting different approaches to teaching Building Information Modelling (BIM) in schools of Architecture. The scope of the paper is based on both the author's knowledge of recent BIM implementations in the academic curricula and experiments conducted at Lodz University of Technology. Necessary prerequisites enabling understanding the complex knowledge are discussed. What is more, the scheme for the integrated BIM pedagogy is proposed.
keywords	Building Information Modelling; BIM; semantic model; information visualization; integrated design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2016_367
id	sigradi2016_367
authors	Lima, Fábio; Furtado, Neander
year	2016
title	Babiy Yar: análise do edifício digital, metáfora do holocausto nazista [Babiy Yar: analysis of digital building, metaphor of the Nazi holocaust]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.681-685
summary	The architecture has been greatly expanded in its complexity by the resources of computing. Thus, most intense experiences are achieved through visual metaphors. As a way of understanding digital cases increasingly present in the design of everyday life, this work aims to illustrate an application of the semiotic method of Charles W. Morris: a study on digital design created by Kokkugia Architects, the building Babiy Yar Memorial. A syntactic analysis of the digital process (presenting the concepts and key elements within the process) is performed; the understanding of that expression in the semantic context and, finally, their contextual pragmatic aspects.
keywords	Digital Architecture, Kokkugia, Semiotics, Analysis
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_435
id	caadria2016_435
authors	Lin, Chieh-Jen
year	2016
title	The STG Pattern: Application of a “Semantic-Topological-Geometric” Information Conversion Pattern to Knowledge Modeling in Architectural Conceptual Design
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 435-444
doi	https://doi.org/10.52842/conf.caadria.2016.435
summary	Generative modelling tools have become a popular means of composing algorithms to generate complex building forms at the conceptual design stage. However, composing algorithms in order to meet the requirements of general design criteria, and communicating those criteria with other disciplines by means of generative algorithms still faces technical challenges. This paper proposes the use of a “Se- mantic-Topological-Geometric (STG)” pattern to guide architects in composing algorithms for representing, modelling, and validating de- sign knowledge and criteria. The STG pattern aims to help architects for converting semantic information concerning the situations of a project into design criteria, which are usually composed of topological relations among design elements, in order to explore the geometric properties of building components by means of generated 3D models.
keywords	Generative modelling; design criteria; design pattern; semantic ontology; BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: