Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 314

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_055
id	ecaade2016_055
authors	Baranovskaya, Yuliya, Prado, Marshall, Dörstelmann, Moritz and Menges, Achim
year	2016
title	Knitflatable Architecture - Pneumatically Activated Preprogrammed Knitted Textiles
doi	https://doi.org/10.52842/conf.ecaade.2016.1.571
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 571-580
wos	WOS:000402063700062
summary	Textiles are widely used in architecture for tensile structures, as they are lightweight and can easily span large distances. These structures typically require an external framework for a support. Inflatable structures are self-supporting but are limited to relatively simple forms or require complex and predetermined cut patterns. The development of an adaptive and programmable textile system with an integrative method for pneumatic activation would create a novel self-supporting structure with high degree of design and architectural potential. This creates a highly integrative hybrid system where the generic pneumatic membranes are constrained by the differentiated knitted textile skin that is stretched in several directions under air pressure. This allows for an innovative, lightweight, easily transportable design, where the preprogrammed knitting pattern defines the structure, geometry and formation, activated under pneumatic pressure.
keywords	programming textiles; binary textiles; analogue computing; air inflation; grading textile properties
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia16_254
id	acadia16_254
authors	Sharmin, Shahida; Ahlquist, Sean
year	2016
title	Knit Architecture: Exploration of Hybrid Textile Composites Through the Activation of Integrated Material Behavior
doi	https://doi.org/10.52842/conf.acadia.2016.254
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 254-259
summary	The hybrid system in textile composites refers to the structural logic defined by Heino Engel, which describes a system that integrates multiple structural behaviors to achieve an equilibrium state (Engel 2007). This research explores a material system that can demonstrate a hybrid material behavior defined by the differentiated tensile and bending-active forces in a single, seamless knitted composite material. These behaviors were installed during the materialization phase and activated during the composite formation process. Here, the material formation involves two interdependent processes: 1) development of the knitted textile with integrated tensile and reinforced materials and 2) development of the composite by applying pre-stress and vacuuming the localized area with reinforcements in a consistent resin-based matrix. The flat bed industrial weft knitting machine has been utilized to develop the knitted textile component of the system with a controlled knit structure. This enables us to control the material types, densities, and cross sections with integrated multiple layers/ribs and thus, the performance of the textile at the scale of fiber structure. Both of these aspects were researched in parallel, using physical and computational methods informed and shaped by the potentials and constraints of each other. A series of studies has been utilized to develop small-scale prototypes that depict the potential of the hybrid textile composite as the generator of complex form and bending active structures. Ultimately, it indicates the possibilities of hybrid textile composite materials as self-structuring lightweight components that can perform as highly articulated and differentiated seamless architectural elements that are capable of transforming the perception of light, space, and touch.
keywords	form-finding, programmable materials, composite forming processes, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2016_425
id	caadria2016_425
authors	Sjarifudin, Firza Utama
year	2016
title	Adaptive Decorative Building Skin
doi	https://doi.org/10.52842/conf.caadria.2016.425
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 425-434
summary	Traditional decorative ornaments were commonly used on the building skin of traditional architecture. Nowadays in urban areas, those ornaments become less popular for they are considered old- fashioned and due to the lack of technical function that matches with the modern building designs. Based on those issue, this paper pro- posed a type of building skin that aimed to revive a new expression of traditional decorative elements by applying digital design tools and technology as well as having an adaptive function. Traditional decora- tive ornaments merged in an adaptive skin that used traditional pat- terns as a controller of the effect of environmental changes in a build- ing could provide a new expression of the use of traditional ornaments on a building in accordance with the times. Most of the adaptive building skin used kinetic techniques in order to make its formation and pattern transformable. This paper proposed a parametric-cam mechanism to transform the pattern of traditional ornament using pre- programmed analysis data of environmental changes to parametrically drive the number of rotation phase and length of nose that generated the shape of the cams. In conclusion, this paper has developed a proto- typical tool that facilitates the new approach to kinetic decorative or- naments on building skin.
keywords	Decorative ornaments; adaptive building skin; camshaft mechanism; kinetic building; building technology
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia16_280
id	acadia16_280
authors	Thomsen, Mette Ramsgaard; Tamke, Martin; Karmon, Ayelet; Underwood, Jenny; Gengnagel, Christoph; Stranghoner, Natalie; Uhlemann, Jorg
year	2016
title	Knit as bespoke material practice for architecture
doi	https://doi.org/10.52842/conf.acadia.2016.280
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 280-289
summary	This paper presents an inquiry into how to inform material systems that allow for a high degree of variation and gradation of their material composition. Presenting knit as a particular system of material fabrication, we discuss how new practices that integrate material design into the architectural design chain present new opportunities and challenges for how we understand and create cycles of design, analysis, specification and fabrication. By tracing current interdisciplinary efforts to establish simulation methods for knitted textiles, our aim is to question how these efforts can be understood and extended in the context of knitted architectural textiles. The paper draws on a number of projects that prototype methods for using simulation and sensing as grounds for informing the design of complex, heterogeneous and performative materials. It asks how these methods can allow feedback in the design chain and be interfaced with highly craft-based methods of fabrication.
keywords	cross disciplinary collaboration, knitting, light weight simulation, idesign integrated fe simulation, interfacing, sensing, bespoke material fabrication
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ijac201614105
id	ijac201614105
authors	Ahlquist, Sean
year	2016
title	Sensory material architectures: Concepts and methodologies for spatial tectonics and tactile responsivity in knitted textile hybrid structures
source	International Journal of Architectural Computing vol. 14 - no. 1, 63-82
summary	As the knowledge of material computation advances, continuing the seamless integration of design and fabrication, questions beyond materialization can be addressed with a focus on sensing, feedback, and engagement as critical factors of design exploration. This article will discuss a series of prototypes, design methodologies, and technologies that articulate a textile’s micro-architecture, at the scale of fibers and stitches, to instrumentalize simultaneous structural, spatial, and sensory-responsive qualities. The progression of research displays an ever-deepening instrumentalization of fiber structure and its implications to form definition and responsivity, in creating form- and bending-active structures. The research results in a more refined definition of material behavior as the innate phenomena which emerge at the moment of textile fabrication. Ultimately, the architecture, in its materiality and physical, visual, and auditory responsivity, is designed to address specific challenges for children in filtering multiple sensory inputs, an underlying factor of autism spectrum disorder.
keywords	CNC Knitting, Form-active, Bending-active, Textile hybrid, Mutli-sensory
series	journal
last changed	2016/06/13 08:34

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2017_280
id	ecaade2017_280
authors	Baldissara, Matteo, Perna, Valerio, Saggio, Antonino and Stancato, Gabriele
year	2017
title	Plug-In Design - Reactivating the Cities with responsive Micro-Architectures. The Reciprocal Experience
doi	https://doi.org/10.52842/conf.ecaade.2017.2.571
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 571-580
summary	Every city has under utilized spaces that create a series of serious negative effects. Waiting for major interventions, those spaces can be reactivated and revitalized with soft temporary projects: micro interventions that light up the attention, give new meaning and add a new reading to abandoned spaces. We can call this kind of operations "plug-in design", inheriting the term from computer architecture: interventions which aim to involve the citizens and activate the environment, engage multiple catalyst processes and civil actions. Plug-in design interventions are by all meanings experimental, they seek for interaction with the users, locally and globally. Information Technology - with its parametric and site-specific capabilities and interactive features - can be instrumental to create such designs and generate a new consciousness of the existing environment. With this paper we will illustrate how two low-budget interventions have re-activated a forgotten public space. Parametric design with a specific script allowing site-specific design, materials and structure optimization and a series of interactive features, will be presented through Reciprocal 1.0 and Reciprocal 2.0 projects which have been built in 2016 in Italy by the nITro group.
keywords	reciprocal frame; parametric design; responsive technology; plug-in design; interactivity; re-activate
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia16_164
id	acadia16_164
authors	Braumann, Johannes; Stumm, Sven; Brell-Cokcan, Sigrid
year	2016
title	Towards New Robotic Design Tools: Using Collaborative Robots within the Creative Industry
doi	https://doi.org/10.52842/conf.acadia.2016.164
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 164-173
summary	This research documents our initial experiences of using a new type of collaborative, industrial robot in the area of architecture, design, and construction. The KUKA LBR-iiwa differs from common robotic configurations in that it uses seven axes with integrated force-torque sensors and can be programmed in the Java programming language. Its force-sensitivity makes it safe to interact with, but also enables entirely new applications that use hand-guiding and utilize the force-sensors to compensate for high tolerances on building sites, similar to how we manually approach assembly tasks. Especially for the creative industry, the Java programming opens up completely new applications that would have previously required complex bus systems or industrial data interfaces. We will present a series of realized projects that showcase some of the potential of this new type of collaborative, safe robot, and discuss the advantages and limitations of the robotic system.
keywords	material tolerances, individualized production, iiwa, assembly, visual robot programming, collaborative robots
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	caadria2016_819
id	caadria2016_819
authors	Foulcher, Nicholas C.; Hedda H. Askland and Ning Gu
year	2016
title	Disruptions: Impact of Digital Design Technologies on Continuity in Established Design Process Paradigms
doi	https://doi.org/10.52842/conf.caadria.2016.819
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 819-828
summary	This paper aims to provide a critical understanding of the discipline of architectural education, exploring how digital technology forms part of two Australian architecture schools. Generally accepted as the unbroken and consistent existence or operation of something over a period of time, continuity represents stability without interrup- tion. In the context of architectural design education, continuity aligns almost symbiotically with the design process; a system that facilitates a continuous loop of input, output and feedback for the designer— from defining the brief, collecting information, synthesising and pre- senting a design proposal. Preliminary findings of a larger research study that investigates the role of technology in architecture educa- tion, suggest that cultural patterns of technology adoption and valua- tion exist, valorising particular tools and establishing a framework for design teaching and practice that might disrupt the continuity of stu- dents’ design process. Moreover, the study shows evidence of a dis- ruption of continuity in design school narratives, emphasising the need to rethink design pedagogy and the place of technology herein. Reflecting on these observations, this paper explores the question: when the tools of digital technology challenge the established design process paradigm of an architectural school, how do educators re- spond to such a disruption in continuity?
keywords	Digital design technology: student learning; course delivery; perception; phenomenology
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2016_544
id	sigradi2016_544
authors	Hernández, Silvia Patricia; Lanzone, Luciana; Landerberg, Raquel; Ruiz, José Manuel; Rezk, Alejandra; Viecens, Martin
year	2016
title	Consideración de la interacción de tipologías de microarquitectura inmótica con las preexistencias ambientales y con el espacio [Consideration of the interaction of inmotics microarchitecture tipologies with the environment preexisting conditions and with the space]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.776-781
summary	We work in the technics and design advantages that are happening in the world, and in Argentina, around microarchitecture, applying these in concrete useful design proposals for urban spaces called intersticiales. Starting from pre-existings conditions of the place, it relation between the landscape, the sounds, and the climate to answer to them with the design. The proposal will be articulated and organized according to the plans and rules from the city of Córdoba. These typologies are designs of inmotic microarchitecture, in this case a health station , just in the entry of the Sarmiento park, a big gym without ceiling.
keywords	Urban micro-architecture; Pre existing environmental; Sustainability
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	architectural_intelligence2023_11
id	architectural_intelligence2023_11
authors	Hua Chai & Philip F. Yuan
year	2023
title	Hybrid intelligence
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00029-w
source	Architectural Intelligence Journal
summary	Alongside shifts in the technological landscape, the origin of creativity in architectural design has been consistently evolving. According to French philosopher Bernard Stiegler, the architectural design process is never individualistic but rather shaped by the complex interaction between human creativity and what he terms the “pre-individual milieu”, the synthesis of various factors such as cultural heritage, technological innovation (Stiegler, 2016). Over the last three decades, the emergence of digital technologies such as the Internet of Things, virtual reality, and artificial intelligence has significantly enhanced the dynamism and diversity of human–machine communication. With the advancement of digital technologies in the field of architecture, artificial intelligence, machine intelligence, and material intelligence are increasingly integrated into the creative process. In the form of hybrid intelligence, this shift expands the scope of architectural creativity and creative agency beyond the mere intelligent landscape of the human mind. As suggested by architectural theorist Antoine Picon, “another possibility is to consider the pairing of man and machine as a new composite subject……This proposition is suggested by various contemporary reflections on computer technologies and their anthropological dimension” (Picon, 2011).
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	ecaade2017_144
id	ecaade2017_144
authors	Lange, Christian J.
year	2017
title	Elements \| robotic interventions II
doi	https://doi.org/10.52842/conf.ecaade.2017.1.671
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 671-678
summary	Reviewing the current research trends in robotic fabrication around the world, the trajectory promises new opportunities for innovation in Architecture and the possible redefinition of the role of the Architect in the industry itself. New entrepreneurial, innovative start-ups are popping up everywhere challenging the traditional model of the architect. However, it also poses new questions and challenges in the education of the architect today. What are the appropriate pedagogical methods to instill enthusiasm for new technologies, materials, and craft? How do we avoid the pure application of pre-set tools, such as the use of the laser cutter has become, which in many schools around the world has caused problems rather than solving problems? How do we teach students to invent their tools especially in a society that doesn't have a strong background in the making? The primary focus of this paper is on how architectural CAAD/ CAM education through the use of robotic fabrication can enhance student's understanding, passion and knowledge of materiality, technology, and craftsmanship. The paper is based on the pedagogical set-up and method of an M. Arch I studio that was taught by the author in fall 2016 with the focus on robotic fabrication, materiality, traditional timber construction systems, tool design and digital and physical craftsmanship.
keywords	CAAD Education, Digital Technology, Craftsmanship, Material Studies, Tool Design, Parametric Modeling, Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac201614205
id	ijac201614205
authors	Leitao, Anto?nio; Ines Caetano and Hugo Correia
year	2016
title	Processing architecture
source	International Journal of Architectural Computing vol. 14 - no. 2, 147-157
summary	Programming promotes creative freedom but might require considerable effort to learn. The Processing language was created to simplify this learning process. Due to its graphical capabilities, the language has become very popular among the electronic arts and design communities. Unfortunately, this popularity could not be extended to the architecture community, which relies on traditional heavyweight computer-aided design and building information modeling applications that cannot be programmed using Processing. As a result, it becomes difficult for architects to take advantage of Processing. To solve this problem, we propose an implementation of Processing that runs in the context of the most used computer-aided design tools in architecture. Our implementation allows Processing to generate two- or three-dimensional models that are directly usable for architectural work. To this end, we also propose extensions to the language, including three-dimensional modeling primitives that dramatically simplify the effort needed for developing large and complex architectural models with Processing.
keywords	Generative Design, Programming, Processing, Architecture, 3D Modeling
series	journal
last changed	2016/06/13 08:34

_id	sigradi2016_801
id	sigradi2016_801
authors	Matson, Carrie Wendt; Sweet, Kevin
year	2016
title	Simplified for Resilience: A parametric investigation into a bespoke joint system for bamboo
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.405-411
summary	Research reveals that most of the structural failures in a natural disaster are related to improper construction assembly methodologies related to human errors. This paper aims to reduce human errors in the building process by taking advantage of computational tools, and using a renewable building material. The research investigates the creation of a novel structural system for bamboo that is able to be repaired, replaced, altered, and easily assembled to restore any damaged building structure. Bamboo is an organic product with diameters that are irregular and unpredictable. The inconsistency in this natural product requires an adaptable construction methodology that responds to its organic nature. A customised joint system is created using parametric software that quickly adapts to the irregularity of the bamboo and are then fabricated using additive printing techniques. The parametric software gives unlimited control of the joint system based on the programmed relationships between the differentiations of each unique bamboo connection. Fabricating each unique joint gives a secure connection at each intersection facilitating an adaptable architecture, whilst reducing construction waste. This paper introduces the groundwork for the implementation of “on-site” manufacturing of a framework joint system. The manufacturing utilises the power and performance of a parametric platform with the technology of bespoke three-dimensionally printed joints – a flexible system that can respond to organic materials and natural external conditions
keywords	Parametric design; Three-dimensional printing; Bamboo construction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_111
id	ecaade2016_111
authors	Passaro, Andrés Martin, Henriques, Gonçalo Castro and Paraizo, Rodrigo Cury
year	2016
title	Sensitive Shelters: Poetics of Interaction
doi	https://doi.org/10.52842/conf.ecaade.2016.1.537
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 537-548
wos	WOS:000402063700059
summary	This paper describes and reflects about a workshop activity in the field of Digital Manufacturing technologies to build responsive shelters that interact with their users and the environment. It addresses a teaching strategy intended to overcome tooling or the simple use of instruments and proposes instead to frame the production of objects using a new language, or a new operative strategy, directly linked to the production of the objects. It addresses a teaching strategy behind the workshop two main levels: first, by the development of technical skills by means of an operative action directly linked to the production of the object, and not apart from the action of making it (as in learning first and applying later). And second - and no less important -, it helped foster the maturation of critical thinking arising from the creation of a dynamic object of architecture - with moving parts and programmed to respond to its users.
keywords	Digital Fabrication; Parametric Design; Responsive Architecture; Sensitive Shelters
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia16_214
id	acadia16_214
authors	Schwartz, Mathew
year	2016
title	Use of a Low-Cost Humanoid for Tiling as a Study in On-Site Fabrication: Techniques and Methods
doi	https://doi.org/10.52842/conf.acadia.2016.214
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 214-223
summary	Since the time architecture and construction began embracing robotics, the pre-fab movement has grown rapidly. As the possibilities for new design and fabrication emerge from creativity and need, the application and use of new robotic technologies becomes vital. This movement has been largely focused on the deployment of industrial-type robots used in the (automobile) manufacturing industry for decades, as well as trying to apply these technologies into off-site building construction. Beyond the pre-fab (off-site) conditions, on-site fabrication offers a valuable next step to implement new construction methods and reduce human work-related injuries. The main challenge in introducing on-site robotic fabrication/construction is the difficulty in calibrating robot navigation (localization) in an unstructured and constantly changing environment. Additionally, advances in robotic technology, similar to the revolution of at-home 3D printing, shift the ownership of modes of production from large industrial entities to individuals, allowing for greater levels of design and construction customization. This paper demonstrates a low-cost humanoid robot as highly customizable technology for floor tiling. A novel end-effector design to pick up tiles was developed, along with a localization system that can be applied to a wide variety of robots.
keywords	humanoid robot, digital fabricaiton, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	acadia16_326
id	acadia16_326
authors	Wit, Andrew; Ng, Rashida; Zhang, Cheng; Kim Simon
year	2016
title	Composite Systems for Lightweight Architectures: Case studies in large-scale CFRP winding
doi	https://doi.org/10.52842/conf.acadia.2016.326
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 326-331
summary	The introduction of lightweight Carbon Fiber Reinforced Polymer (CFRP) based systems into the discipline of architecture and design has created new opportunities for form, fabrication methodologies and material efficiencies that were previously difficult if not impossible to achieve through the utilization of traditional standardized building materials. No longer constrained by predefined material shapes, nominal dimensions, and conventional construction techniques, individual building components or entire structures can now be fabricated from a single continuous material through a means that best accomplishes the desired formal and structural objectives while creating minimal amounts of construction waste and disposable formwork. This paper investigates the design, fabrication and structural potentials of wound, pre-impregnated CFRP composites in architectural-scale applications through the lens of numeric and craft based composite winding implemented in two unique research projects (rolyPOLY + Cloud Magnet). Fitting into the larger research agenda for the CFRP-based robotic housing prototype currently underway in the “One Day House” initiative, these two projects also function as a proof of concept for CFRP monocoque and gridshell based structural systems. Through a rigorous investigation of these case studies, this paper strives to answer several questions about the integration of pre-impregnated CFRP in future full-scale interventions: What form-finding methodologies lend themselves to working with CFRP? What are the advantages and disadvantages of working with pre-impregnated CFRP tow in large-scale applications? What are efficient methods for the placement of CFRP fiber on-site? As well as how scalable is CFRP?
keywords	form finding, winding, cfrp, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	ijac201614104
id	ijac201614104
authors	Wood, Dylan Marx; David Correa, Oliver David Krieg and Achim Menges
year	2016
title	Material computation—4D timber construction: Towards building-scale hygroscopic actuated, self-constructing timber surfaces
source	International Journal of Architectural Computing vol. 14 - no. 1, 49-62
summary	The implementation of active and responsive materials in architecture and construction allows for the replacement of digitally controlled mechanisms with material-based systems that can be designed and programmed with the capacity to compute and execute a behavioral response. The programming of such systems with increasingly specific response requires a material-driven computational design and fabrication strategy. This research presents techniques and technologies for significantly upscaling hygroscopically actuated timber-based systems for use as self-constructing building surfaces. The timber’s integrated hygroscopic characteristics combined with computational design techniques and existing digital fabrication methods allow for a designed processing and reassembly of discrete wood elements into large-scale multi element bilayer surfaces. This material assembly methodology enables the design and control of the encoded direction and magnitude of humidity-actuated responsive curvature at an expanded scale. Design, simulation, and material assembly tests are presented together with formal and functional configurations that incorporate self-constructing and self-rigidizing surface strategies. The presented research and prototypes initiate a shift toward a large-scale, self-construction methodology.
keywords	Hygroscopic, self-forming, computational design, autonomous actuation, wood structures
series	journal
last changed	2016/06/13 08:34

_id	ijac201614206
id	ijac201614206
authors	Yanagawa, Kane
year	2016
title	ReIndustrializing Architecture
source	International Journal of Architectural Computing vol. 14 - no. 2, 158-166
summary	After decades of improving the efficiency and economy of our existing building ecology, instruments of the Third Industrial Revolution are redefining the practice of architecture, both internally and externally. This article focuses on the employment of the Constrained Design Hysteresis methodology as a mediating strategy, in which computational tools for content creation and fabrication can merge in post-industrial societies to effectively reindustrialize the fields of architectural design manufacturing and building. Such reformation of the accepted norms of architectural building practice do not represent a regression of the profession to a pre-industrial mode of building craftsmanship, but an evolution into one that directly addresses various shortcomings of global industrialization, ranging from restrictions imposed by mass production to the creation of social class disparity. In this context, the application of computational tools and processes can both empower and liberate design individuals through the restructuring of the existing industrial manufacturing ecosystems.
keywords	Digital fabrication, design automation, third industrial revolution, constrained design hysteresis, social reform
series	journal
last changed	2016/06/13 08:34

_id	acadia16_298
id	acadia16_298
authors	Yu, Lei; Huang, Yijiang; Zhongyuan, Liu; Xiao, Sai; Liu, Ligang; Song, Guoxian; Wang, Yanxin
year	2016
title	Highly Informed Robotic 3D Printed Polygon Mesh: A Nobel Strategy of 3D Spatial Printing
doi	https://doi.org/10.52842/conf.acadia.2016.298
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 298-307
summary	Though robotic 3D printing technology is currently undergoing rapid development, most of the research and experiments are still based on a bottom up layering process. This paper addresses long term research into a robotic 3D printed polygon mesh whose struts are directly built up and joined together as rapidly generated physical wireframes. This paper presents a novel “multi-threaded” robotic extruder, as well as a technical strategy to create a “printable” polygon mesh that is collision-free during robotic operation. Compared to standard 3D printing, architectural applications demand much larger dimensions at human scale, geometrically lower resolution and faster production speed. Taking these features into consideration, 3D printed frameworks have huge potential in the building industry by combining robot arm technology together with FDM 3D printing technology. Currently, this methodology of rapid prototyping could potentially be applied on pre-fabricated building components, especially ones with uniform parabolic features. Owing to the mechanical features of the robot arm, the most crucial challenge of this research is the consistency of non-stop automated control. Here, an algorithm is employed not only to predict and solve problems, but also to optimize for a highly efficient construction process in coordination of the robotic 3D printing system. Since every stroke of the wireframe contains many parameters and calculations in order to reflect its native organization and structure, this robotic 3D printing process requires processing an intensive amount of data in the back stage.
keywords	interdisciplinary design, craft in design computation, digital fabrication
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

For more results click below: