Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_p02
id	ecaade2018_p02
authors	Kepczynska-Walczak, Anetta and Martens, Bob
year	2018
title	Digital Heritage - Special Panel Session
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-44
doi	https://doi.org/10.52842/conf.ecaade.2018.1.039
summary	According to eCAADe's mission, the exchange and collaboration within the area of computer aided architectural design education and research, while respecting the pedagogical approaches in the different schools and countries, can be regarded as a core activity. The current session follows up on the first Contextualised Digital Heritage Workshop (CDHW) held on the occasion of eCAADe 2016 in Oulu (D. di Mascio et.al.) This event was thought to represent the first of a series of future contextualized digital heritage workshops and hence, the name Oulu interchangeable with the name of any other city or place. The second CDHW took place in the framework of CAADRIA 2017 in Suzhou (D. di Mascio & M.A. Schnabel) and focussed on sharing and dissemination of heritage information and personal experiences, such as narratives.The primary objective for the 2018 digital heritage session is to engage participants in an active discussion, not the longer format presentation of prepared positions. The round table itself is limited to short opening statements so as to ensure time is allowed for viewpoints to be exchanged and for the conference attendees to join in on the issues discussed. The panel will review past practices with the potential for guiding future direction.
keywords	Digital technology; Built heritage; Virtual archeology
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
wos	WOS:000402063700071
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2016_013
id	caadria2016_013
authors	Aschwanden, Gideon D.P.A.
year	2016
title	Neighbourhood detection with analytical tools
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2016.013
summary	The increasing population size of cities makes the urban fabric ever more complex and more disintegrated into smaller areas, called neighbourhoods. This project applies methods from geoscience and software engineering to the process of identification of those neighbourhoods. Neighbourhoods, by nature, are defined by connec- tivity, centrality and similarity. Transport and geospatial datasets are used to detect the characteristics of places. An unsupervised learning algorithm is then applied to sort places according to their characteris- tics and detect areas with similar make up: the neighbourhood. The at- tributes can be static like land use or space syntax attributes as well as dynamic like transportation patterns over the course of a day. An un- supervised learning algorithm called Self Organizing Map is applied to project this high dimensional space constituting of places and their attributes to a two dimensional space where proximity is similarity and patterns can be detected – the neighbourhoods. To summarize, the proposed approach yields interesting insights into the structure of the urban fabric generated by human movement, interactions and the built environment. The approach represents a quantitative approach to ur- ban analysis. It reveals that the city is not a polychotomy of neigh- bourhoods but that neighbourhoods overlap and don’t have a sharp edge.
keywords	Data analytics; urban; learning algorithms; neighbourhood delineation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_280
id	ecaade2017_280
authors	Baldissara, Matteo, Perna, Valerio, Saggio, Antonino and Stancato, Gabriele
year	2017
title	Plug-In Design - Reactivating the Cities with responsive Micro-Architectures. The Reciprocal Experience
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 571-580
doi	https://doi.org/10.52842/conf.ecaade.2017.2.571
summary	Every city has under utilized spaces that create a series of serious negative effects. Waiting for major interventions, those spaces can be reactivated and revitalized with soft temporary projects: micro interventions that light up the attention, give new meaning and add a new reading to abandoned spaces. We can call this kind of operations "plug-in design", inheriting the term from computer architecture: interventions which aim to involve the citizens and activate the environment, engage multiple catalyst processes and civil actions. Plug-in design interventions are by all meanings experimental, they seek for interaction with the users, locally and globally. Information Technology - with its parametric and site-specific capabilities and interactive features - can be instrumental to create such designs and generate a new consciousness of the existing environment. With this paper we will illustrate how two low-budget interventions have re-activated a forgotten public space. Parametric design with a specific script allowing site-specific design, materials and structure optimization and a series of interactive features, will be presented through Reciprocal 1.0 and Reciprocal 2.0 projects which have been built in 2016 in Italy by the nITro group.
keywords	reciprocal frame; parametric design; responsive technology; plug-in design; interactivity; re-activate
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_724
id	sigradi2016_724
authors	Bomfim, Carlos Alberto Andrade; Lisboa, Bruno Teixeira Wildberger; Matos, Pedro Cesar Correia de
year	2016
title	Gest?o de Obras com BIM – Uma nova era para o setor da Construç?o Civil [Construction Management with BIM – A new era for the Construction sector]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.556-560
summary	The update in the design process associated with a constant search for efficient construction methods, budgets and actual schedules, passes through common terms the planning engineering and constructability, rationalization and integration. This article is based on literature review on the topic and interview with the experience of BIM core of a company in Brazil. BIM involves more than just 3D modeling and is also commonly defined into more dimensions, such as 4D (time), 5D (cost), 6D (the built - operation) and 7D (sustainability). The use of BIM can now be considered a reality that will promote changes to Construction.
keywords	Project Management; Construction Management; Digital Modeling; Design Process; Simulation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_073
id	ecaade2016_073
authors	Borhani, Alireza and Kalantar, Negar
year	2016
title	Material Active Geometry - Constituting Programmable Materials for Responsive Building Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 639-648
doi	https://doi.org/10.52842/conf.ecaade.2016.1.639
wos	WOS:000402063700069
summary	This paper is part of a body of research developing an exploratory dialogue between the built form and the environment, via experimentation with performative geometry and material. Here, geometry is considered a design material with the specific capacity to contribute to the performative aspects and kinetic capabilities of building skins.This work opens with a review of emerging opportunities for architects to design materials. It then discusses the concept of Material Active Geometry (MAG) as a means of designing new properties for existing materials. This is followed by a discussion of MAG principles that inform the concepts of flexibility and rigidity in a 3D-printed textile called Flexible Textile Structure (FTS). This research characterizes two FTS types and discusses their potential to be employed in building skins; it also considers combinatory approaches to computational models and physical prototyping. The work concludes with a discussion of the advantages of using FTS, and provides a trajectory for future research in the field of responsive materials and systems.
keywords	Programmable Material; Material Active Geometry; Flexible Textile Structures; Responsive Building Skins; Flexible yet Rigid
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2016_767
id	caadria2016_767
authors	De Azambuja Varela, Pedro and Timothy Merritt
year	2016
title	CorkVault Aarhus: exploring stereotomic design space of cork and 5-axis CNC waterjet cutting
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 767-776
doi	https://doi.org/10.52842/conf.caadria.2016.767
summary	This paper presents the design, fabrication, and construc- tion of CorkVault Aarhus, which was designed using parametric and physics simulation software and realized from ECA cork sheets cut using a CNC waterjet cutter. We recount the lessons learned through the intensive two-week workshop that explored the limits of the mate- rials and tools through prototypes and culminated with the assembly of the final free-form vault structure. Various vaults and arch proto- types provided pedagogical and research value, building up knowledge essential to the final structure built, a human scale pavilion designed and built in three days and made of a thin shell of cork pan- els working only in compression. Three driving concepts were crucial to the experience: stereotomy as a supporting theory, expanded cork agglomerate (ECA) as the main material and water jet cutting as the principal means of fabrication. The complex vault shape called for precise 5-axis cuts supporting a new paradigm in building stereotomic components for architecture.
keywords	Stereotomy; generative algorithm; digital fabrication; waterjet; cork
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2016_ws-dheritage
id	ecaade2016_ws-dheritage
authors	Di Mascio, Danilo, Kepczynska-Walczak, Anetta and , Nicholas Webb
year	2016
title	Contextualized Digital Heritage Workshop - Oulu
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 59-62
doi	https://doi.org/10.52842/conf.ecaade.2016.1.059
wos	WOS:000402063700005
summary	Constructions pertaining to built heritage represent precious material and cultural resources to be studied and preserved for present and future generations. In recent years, this built heritage is increasingly understood, documented, managed, analysed and disseminated through the application of several digital technologies; this trend has created one of the main research areas in architecture, called Digital Heritage. Digital technologies open up alternative and new possibilities in the study of tangible and intangible features of built heritage. This workshop aims to create a space to allow scholars to discuss, share and apply their knowledge in a digital heritage exercise contextualized in Oulu.
keywords	Digital Heritage; Context; Built Heritage; Digital Technologies
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ascaad2016_044
id	ascaad2016_044
authors	Garagnani, Simone; James Arteaga and Luisa Bravo
year	2016
title	Understanding Intangible Cultural Landscapes - Digital tools as a medium to explore the complexity of the urban space
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 431-436
summary	The cultural heritage landscape (CHL) of the urban space in cities is the result of multiple layers of complexity, encompassing both the tangible built environment and intangible cultural values that together influence the living heritage that forms the spirit of place. This paper explores the gap in the intangible and living heritage documentation of CHLs by using a section of public space in the medieval historic centre of Bologna, Italy. Digital technology is used to propose a new paradigm in the study of the complex link between the tangible, intangible and living cultural heritage, co-existing in public spaces of a city’s cultural heritage landscape.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2019_626
id	caadria2019_626
authors	Hahm, Soomeen, Maciel, Abel, Sumitiomo, Eri and Lopez Rodriguez, Alvaro
year	2019
title	FlowMorph - Exploring the human-material interaction in digitally augmented craftsmanship
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 553-562
doi	https://doi.org/10.52842/conf.caadria.2019.1.553
summary	It has been proposed that, after the internet age, we are now entering a new era of the '/Augmented Age/' (King, 2016). Physician Michio Kaku imagined the future of architects will be relying heavily on Augmented Reality technology (Kaku, 2015). Augmented reality technology is not a new technology and has been evolving rapidly. In the last three years, the technology has been applied in mainstream consumer devices (Coppens, 2017). This opened up possibilities in every aspect of our daily lives and it is expected that this will have a great impact on every field of consumer's technology in near future, including design and fabrication. What is the future of design and making? What kind of new digital fabrication paradigm will emerge from inevitable technological development? What kind of impact will this have on the built environment and industry? FlowMorph is a research project developed in the Bartlett School of Architecture, B-Pro AD with the collaboration of the authors and students as a 12 month MArch programme, we developed a unique design project trying to answer these questions which will be introduced in this paper.
keywords	Augmented Reality, Mixed Reality, Virtual Reality, Design Augmentation, Digital Fabrication, Cognition models, Conceptual Designing, Design Process, Design by Making, Generative Design, Computational Design, Human-Machine Collaboration, Human-Computer Collaboration, Human intuition in digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201614306
id	ijac201614306
authors	Kuan-Ying, Wu and Hou June-Hao
year	2016
title	Spark Wall: Control responsive environment by human behaviour
source	International Journal of Architectural Computing vol. 14 - no. 3, 255-262
summary	Responsive environment uses human–computer interface to improve how humans experience their surroundings. Many research aimed at different kinds of interactive environment modules with new digital tectonics or computation components. However, those new environments sometimes could be manipulated by components which are less user-friendly and complex than traditional counterparts. In this article, we implemented a real responsive interface – the Spark Wall system, which use 160 actuator modules as our responsive feedback interface and depth camera as sensing input. We built up multi-modal interface for different operating purposes allowing the user to control responsive environment with their behaviour. The user could change his or her body posture to change the pattern of the wall and moreover define touch-input area on any surface. From the user’s perspective, a responsive environment should be a simple system with understandable control modes. A responsive artefact should also be able to dynamically correspond to different methods of operation according to the user’s intentions.
keywords	Responsive environment, human–computer interface, surface computing, multi-modal interface, depth sensing
series	journal
last changed	2016/10/05 08:21

_id	acadia16_78
id	acadia16_78
authors	Parker, Matthew; Taron, Joshua M.
year	2016
title	Form-Making in SIFT Imaged Environments
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 78-87
doi	https://doi.org/10.52842/conf.acadia.2016.078
summary	Within the contemporary condition, turbulence that confronts architecture is no longer unpredictable weather patterns or wild beasts, but the unintended forces of a constantly connected digital infrastructure that demands constant attention. If, as Mark Wigley puts it, “architecture is always constructed in and against a storm” it is time for architecture to reevaluate its ability to separate us from a new storm-one that situates technology, global connectivity, human, non-human and composite users, and algorithmic architecture itself as new weather systems. Toward this end, this paper explores architecture’s ability to mediate and produce algorithmic turbulence generated through image-based sensing of the built environment. Through a close reading of Le Corbusier’s Urbanisme, we argue that for much of the 20th and the early part of the 21st century, cities have been designed to produce diagrams of smooth and homogenous flows. However, distributed personal technologies produce virtual layers that unevenly map onto the city, resulting in turbulent forces that computational platforms aim to conceal behind a visual narrative of accuracy, cohesion, anticipation, and order. By focusing on SIFT algorithms and their ability to extract n-dimensional vectors from two-dimensional images, this research explores computational workflows that mobilize turbulence towards the production of indeterminate form. These forms demarcate a new kind of challenge for both architecture and the city, whereby a cultural appetite to deploy algorithms that produce a smooth and seamless image of the world comes hand in hand with the turbulent and disruptive autonomy of those very same algorithms. By revisiting Urbanisme, a new set of architectural objectives are established that contextualize SIFTS within an urban agenda.
keywords	complex morphology, sift algorithms, architectural representation, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	ijac201614103
id	ijac201614103
authors	Savov, Anton; Oliver Tessmann and Stig Anton Nielsen
year	2016
title	Sensitive Assembly: Gamifying the design and assembly of fac?ade wall prototypes
source	International Journal of Architectural Computing vol. 14 - no. 1, 30-48
summary	The article describes a method for gamifying the design and assembly of computationally integrated structures built out of discrete identical blocks. As a case study, the interactive installation Sensitive Assembly was designed and built at the Digital Design Unit (Prof. Dr Oliver Tessmann) at the Technische Universita?t of Darmstadt and exhibited during the digital art festival NODE 2015 in Frankfurt in 2015. Sensitive Assembly invites people to play a Jenga-like game: starting from a solid wall, players are asked to remove and replace the installation’s building blocks to create windows to a nurturing light while challenging its stability. A computational system that senses the current state of the wall guides the physical interaction and predicts an approaching collapse or a new light beam breaking through. The installation extends the notion of real-time feedback from the digital into the physical and uses machine-learning techniques to predict future structural behaviour.
keywords	Gamification, prediction, feedback, interaction, assembly
series	journal
last changed	2016/06/13 08:34

_id	acadia16_260
id	acadia16_260
authors	Schleicher, Simon; La Magna, Riccardo
year	2016
title	Bending-Active Plates: Form-Finding and Form-Conversion
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 260-269
doi	https://doi.org/10.52842/conf.acadia.2016.260
summary	With this paper, the authors aim to contribute to the discourse on bending-active structures by highlighting two different design methods, form-finding and form-conversion. The authors compare the two methods through close analysis of bending-active plate structures, discussing their advantages and disadvantages based on three built case studies. This paper introduces the core ideas behind bending-active structures, a rather new structural system that makes targeted use of large elastic deformations to generate and stabilize complex geometrical forms based on initially planar elements. Previous research has focused mainly on form-finding. As a bottom-up approach, it begins with flat plates and recreates the bending and coupling process digitally to gradually determine the final shape. Form-conversion, conversely, begins with a predefined shape that is then discretized by strategic surface tiling and informed mesh subdivision, and which in turn considers the geometrical and structural constraints given by the plates. The three built case studies exemplify how these methods integrate into the design process. The first case study applies physical and digital form-finding techniques to build a chaise lounge. The latter two convert a desired shape into wide-spanning constructions that either weave multiple strips together or connect distant layers with each other, providing additional rigidity. The presented case studies successfully prove the effectiveness of form-finding and form-conversion methods and render a newly emerging design space for the planning, fabrication, and construction of bending-active structures.
keywords	bending-active structures, form-conversion, form-finding, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	sigradi2016_695
id	sigradi2016_695
authors	Stofella, Arthur; Bertoli, Luiza Figueredo;Vaz, Carlos Eduardo Verzola; Kós, José Ripper
year	2016
title	O desenvolvimento de um sistema de proteç?o de fachadas cinéticos: um protótipo responsivo ao comportamento do usuário [Developing a kinect façade protection system: a prototype responsive to the user behaviour]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.550-555
summary	This article presents the new results of a work originally prepared by undergraduate students of the Federal University of Pernambuco that developed a functional physical prototype of a responsive façade. At first, the system only changed itself accordingly to the modifications of the environmental parameters, such as temperature, humidity and luminosity. In this new research stage, a simplified version of the façade was developed to make the system responsive to the behaviour of those who are using the indoor spaces of buildings. The physical prototype was built with LEDs that represent the actuators responsible for modifying the position of the responsive façade parts, and the Kinect’s motion sensor was used to capture the human behaviour. The prototype here presented was developed with simple, easy to acquire materials, making it an element that can be easily reproduced and employed as an educational tool of automation applied to architecture.
keywords	Responsive design, human activities, computer vision
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	caadria2016_683
id	caadria2016_683
authors	Schnabel, Marc Aurel; Serdar Aydin, Tane Moleta, Davide Pierini and Toma?S Dorta
year	2016
title	Unmediated cultural heritage via Hyve-3D: Collecting individual and collective narratives with 3D sketching
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 683-692
doi	https://doi.org/10.52842/conf.caadria.2016.683
summary	Cultural heritage is traditionally mediated through institu- tional bodies that are authorised to broadcast heritage information, whereas new media technologies such as social media platforms con- tinue to enforce individual storytelling and information sharing. Therefore GLAMs (Galleries, Libraries, Archives and Museums) have to cope with a shift of public interest from their services to more ac- cessible, entertaining and democratic engagements available as ‘liv- ing’ media. Unmediated cultural heritage is the paramount aim of this work and, in a theoretical sense, a utopia for generation of authenticity or meaning-making. Within the realm of digital heritage, this study explores the nature of engagement with cultural heritage using an in- novative means. In this phase of the research, a photogrammetric model of Kashgar’s narrow alleys is deployed in a system, called Hy- brid Virtual Environment 3D (Hyve-3D). Via its 3D cursor technolo- gy, the concept of unmediated cultural heritage is unfolded through active participation, collaboration and interaction. Thus, in the context of heritage, this research explores a hitherto undocumented frontier of Hyve-3D designated to immersive collaborative 3D sketching.
keywords	Digital heritage; Hyve-3D; photogrammetry; authenticity; 3D sketching
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac201614301
id	ijac201614301
authors	Zarzycki, Andrzej
year	2016
title	Epic video games: Narrative spaces and engaged lives
source	International Journal of Architectural Computing vol. 14 - no. 3, 201-211
summary	Contemporary video games such as Mass Effect or Assassin’s Creed are emerging as a new form of media departing from traditional games purely seen as problem-solving exercises. They represent a new creative direction enjoyed by a broader audience, similar to those of TV and cinema. At the same time, they are significantly different from TV and cinema, since they place the user at the center of interactions, allowing content creation and forming strong emotional bonds. This article discusses the role of narratives in these new epic games as the main driver behind their social appeal and commercial success. It also poses a number of questions in the context of architecture and the possible fusion of both architecture and narrative.
keywords	Video games, narratives, storytelling, interactive media
series	journal
last changed	2016/10/05 08:21

_id	caadria2016_777
id	caadria2016_777
authors	Aditra, Rakhmat F. and Andry Widyowijatnoko
year	2016
title	Combination of mass customisation and conventional construction: A case study of geodesic bamboo dome
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 777-786
doi	https://doi.org/10.52842/conf.caadria.2016.777
summary	With the development of advance fabrication, several digi- tal fabrication approaches have been developed. These approaches en- able better form exploration than the conventional manufacturing pro- cess. But, the built examples mostly rely on advance machinery which was not familiar or available in developed country where construction workers are still abundant. Meanwhile, much knowledge gathers in the field practice. This research is aimed to explore an alternative con- struction workflow and method with the combination of mass custom- ization and conventional construction method and to propose the structure system that emphasized this alternative workflow and meth- od. Lattice structure was proposed. The conventional construction method was used in the struts production and mass customization method, laser cutting, and was used for connection production. The algorithmic process was used mainly for data mining, details design, and component production. The backtracking was needed to be pre- dicted and addressed previously. Considerations that will be needed to be tested by further example are on the transition from the digital pro- cess to the manual process. Next research could be for analysing the other engineering aspect for this prototype and suggesting other struc- tural system with more optimal combination of conventional construc- tion and mass customization.
keywords	Mass customisation; algorithmic design; digital fabrication; geodesic dome; lattice structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_001
id	ascaad2016_001
authors	Al-Attili, Aghlab; Anastasia Karandinou and Ben Daley
year	2016
title	Parametricism vs Materialism - Evolution of digital technologies for development
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, 597 p.
summary	We build on previous technological developments in CAAD by looking into parametric design exploration and the development of the concept of parametricism. We use the phenomenological backdrop to account for our physical experiences and encounters as well as our mental ones; both evident in the link between parametric design as a process and an outcome. In specific, we previously examined two particular metaphors. The first metaphor addressed aspects of virtual environments that resemble our physical world; In other words, computer model as physical model and digital world as material world. In this volume, we extend the exploration into aspects of virtual environments and their resemblance to physical environments by looking at ‘performance’ aspects: the way in which environments are sensed, measured, tracked and visualised. Moreover, we reflect on matters and materiality in both virtual and physical space philosophically, theoretically, practically and reflectively. The second metaphor looked into the modes and means of interaction between our bodies and such virtual environment. Here we extend the investigation to look at the ways in which measures of environmental performance influence human interaction in real environments. The exploration takes us further to look into the area of design fabrication of the built environment, and methods in which developed processes meet environmental performance requirements, and the innovative outcomes that lead to disruptive technologies getting introduced into design and we revisit parametric design under this focus area.
series	ASCAAD
type	normal paper
email
last changed	2024/02/13 14:28

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
doi	https://doi.org/10.52842/conf.caadria.2016.631
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: