Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 511

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_085
id	ecaade2016_085
authors	Okuda, Shinya and Zhenyi, Lin
year	2016
title	Groove Light - Adding Physical Reality to Virtual Projections Using 3D-printed Lanterns
doi	https://doi.org/10.52842/conf.ecaade.2016.1.113
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 113-120
summary	How might 21st-century computational technologies enhance lighting functionality in architecture? The Groove Light provokes relationships between light and shadow, adding a new dimension to future lighting. A series of distinctive and complex 3D-printed lanterns, which cast identical patterns of geometric shadows, creates the optical illusion that they are floating above a continuous, geometric carpet of shadows. The authors tested this concept in three steps: 1. 3D printability, 2. a lighting test and 3. interactivity. The paper also reports the effectiveness of a selective and custom support strategy for printing overhanging geometries with fused deposition modelling (FDM) 3D printers and further highlights differences between the computational models and physical prototypes in the quest for 'point' light sources.
wos	WOS:000402063700013
keywords	Digital Physicality; 3D Printing; Self-supporting Geometry; Stereographic Projection; Projection Mapping
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2016_395
id	caadria2016_395
authors	Ugarte, J. P. and M. Leef
year	2016
title	Digital Geo-Plexus: Instagram as a tool for re-evaluating notions of proximity
doi	https://doi.org/10.52842/conf.caadria.2016.395
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 395-404
summary	The research presented in this paper describes the develop- ment of an Instagram-based multidimensional clustering algorithm. The algorithm analyses large datasets of Instagram images to establish new metrics that qualitatively assess proximity relations in a given geographical area —i.e. negotiates multiple acceptations of proximity. Influenced by Qualitative Spatial Reasoning, Lewis Mumford’s geo- graphic plexus and Kevin Lynch’s perceptual mapping, a graphic GUI-based application has been developed to produce real-time visu- alizations —maps, network graphs, and charts— by means of brows- ing, downloading and post-processing Instagram feeds. First, the ap- plication’s functioning will be described; second, several graphic visualizations will demonstrate the capabilities of the software; third, limitations and further development will be discussed.
keywords	Instagram; big data; social network
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ascaad2016_014
id	ascaad2016_014
authors	Ahmed, Zeeshan Y.; Freek P. Bos, Rob J.M. Wolfs and Theo A.M. Salet
year	2016
title	Design Considerations Due to Scale Effects in 3D Concrete Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 115-124
summary	The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can’t be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more – all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2016_073
id	ecaade2016_073
authors	Borhani, Alireza and Kalantar, Negar
year	2016
title	Material Active Geometry - Constituting Programmable Materials for Responsive Building Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.639
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 639-648
summary	This paper is part of a body of research developing an exploratory dialogue between the built form and the environment, via experimentation with performative geometry and material. Here, geometry is considered a design material with the specific capacity to contribute to the performative aspects and kinetic capabilities of building skins.This work opens with a review of emerging opportunities for architects to design materials. It then discusses the concept of Material Active Geometry (MAG) as a means of designing new properties for existing materials. This is followed by a discussion of MAG principles that inform the concepts of flexibility and rigidity in a 3D-printed textile called Flexible Textile Structure (FTS). This research characterizes two FTS types and discusses their potential to be employed in building skins; it also considers combinatory approaches to computational models and physical prototyping. The work concludes with a discussion of the advantages of using FTS, and provides a trajectory for future research in the field of responsive materials and systems.
wos	WOS:000402063700069
keywords	Programmable Material; Material Active Geometry; Flexible Textile Structures; Responsive Building Skins; Flexible yet Rigid
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_009
id	ascaad2016_009
authors	Elbasdi, Gulay; Sema Alaçam
year	2016
title	An Investigation on Growth Behaviour of Mycelium in a Fabric Formwork
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 65-74
summary	Most progress in designing mycelium-based material to date has been made by using petri dish and 3d printed geometries. In this study, reshaping capabilities of mycelium-based materials using fabric formwork is being discussed. This ongoing study is the result of a series of experiments about mycelium-based material that aims to investigate its potentials as free- form geometry. In this paper, we aim to make a comparison between initial and end shapes by implementing digital and analogue tools based on mycelium-based fabric formwork experiment. The physical experiment setup consists of different initial geometry alternatives and the deformation will be observed and measured numerically by time-based recording on top and section views. With the help of digital tools, experiments will be documented as a process of formation. We aim to discuss the potential of the usage of mycelium as a binding agent in free form geometry since mycelium acts as natural self-assembling glue. By doing so, structural potentials of the material, which is strengthened by mycelium hyphae, were examined. This study aims to contribute to the design research studies and scientific knowledge together to integrate living systems into the material design as encouraging collaborative interdisciplinary research, thereby positioning designer as a decision-maker from the very beginning of material design process.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia16_352
id	acadia16_352
authors	Farahi, Behnaz
year	2016
title	Caress of the Gaze: A Gaze Actuated 3D Printed Body Architecture
doi	https://doi.org/10.52842/conf.acadia.2016.352
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 352-361
summary	This paper describes the design process behind Caress of the Gaze, a project that represents a new approach to the design of a gaze-actuated, 3D printed body architecture—as a form of proto-architectural study—providing a framework for an interactive dynamic design. The design process engages with three main issues. Firstly, it aims to look at form or geometry as a means of controlling material behavior by exploring the tectonic properties of multi-material 3D printing technologies. Secondly, it addresses novel actuation systems by using Shape Memory Alloy (SMA) in order to achieve life-like behavior. Thirdly, it explores the possibility of engaging with interactive systems by investigating how our clothing could interact with other people as a primary interface, using vision-based eye-gaze tracking technologies. In so doing, this paper describes a radically alternative approach not only to the production of garments but also to the ways we interact with the world around us. Therefore, the paper addresses the emerging field of shape-changing 3D printed structures and interactive systems that bridge the worlds of robotics, architecture, technology, and design.
keywords	eye-gaze tracking, interactive design, 3d printing, smart material, programmable matter, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	caadria2016_549
id	caadria2016_549
authors	Fischer, Thomas and Christiane M. Herr
year	2016
title	Parametric Customisation of A 3D Concrete Printed Pavilion
doi	https://doi.org/10.52842/conf.caadria.2016.549
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 549-558
summary	Advances in 3D printing technology have reached architectural scales with 3D concrete printing, a digitally controlled fabrication process in which fibre-reinforced concrete is deposited layer-by-layer to fabricate building elements. In this paper we present a brief overview of key concrete 3D printing related research development efforts, followed by a report on a research project into the parametric online customisation and fabrication of small 3D concrete printed pavilions. The research project is set in, and addresses possibilities and constraints of, the developing local Chinese construction context.
keywords	3D concrete printing; parametric design; digital fabrication; online customisation; China
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia16_318
id	acadia16_318
authors	Huang, Alvin
year	2016
title	From Bones to Bricks: Design the 3D Printed Durotaxis Chair and La Burbuja Lamp
doi	https://doi.org/10.52842/conf.acadia.2016.318
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 318-325
summary	Drawing inspiration from the variable density structures of bones and the self-supported cantilvers of corbelled brick arches, the Durotaxis Chair and the La Burbuja lamp explore a material-based design process by responding to the challenge of designing a 3D print, rather than 3D printing a design. As such, the fabrication method and materiality of 3D printing define the generative design constraints that inform the geometry of each. Both projects are seen as experiments in the design of 3D printed three-dimensional space packing structures that have been designed specifically for the machines by which they are manufactured. The geometry of each project has been carefully calibrated to capitalize on a selection of specific design opportunities enabled by the capabilities and constraints of additive manufacturing. The Durotaxis Chair is a half-scale prototype of a fully 3D printed multi-material rocking chair that is defined by a densely packed, variable density three-dimensional wire mesh that gradates in size, scale, density, color, and rigidity. Inspired by the variable density structure of bones, the design utilizes principal stress analysis, asymptotic stability, and ergonomics to drive the logics of the various gradient conditions. The La Burbuja Lamp is a full scale prototype for a zero-waste fully 3D printed pendant lamp. The geometric articulation of the project is defined by a cellular 3D space packing structure that is constrained to the angles of repose and back-spans required to produce un-supported 3D printing.
keywords	parametic design, digital fabrication, structural analysis, additive manufacturing, 3d printing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	ascaad2016_019
id	ascaad2016_019
authors	Ibrahim, Magdy M.
year	2016
title	3D Printed Architecture - A new practical frontier in construction methods
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 169-178
summary	It is important to discuss and compare the rationale behind the success of the additive manufacturing technology in particular industries and at a particular scale versus full-scale building construction. The comparison should include structural qualities of the possible used materials, the cost effectiveness of the process, the time factor and its value in the construction process, the mass customization potential of the technology and its effect on building forms. The current state of technology in architecture, despite huge potential, has not produced new architectural forms.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2016_801
id	sigradi2016_801
authors	Matson, Carrie Wendt; Sweet, Kevin
year	2016
title	Simplified for Resilience: A parametric investigation into a bespoke joint system for bamboo
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.405-411
summary	Research reveals that most of the structural failures in a natural disaster are related to improper construction assembly methodologies related to human errors. This paper aims to reduce human errors in the building process by taking advantage of computational tools, and using a renewable building material. The research investigates the creation of a novel structural system for bamboo that is able to be repaired, replaced, altered, and easily assembled to restore any damaged building structure. Bamboo is an organic product with diameters that are irregular and unpredictable. The inconsistency in this natural product requires an adaptable construction methodology that responds to its organic nature. A customised joint system is created using parametric software that quickly adapts to the irregularity of the bamboo and are then fabricated using additive printing techniques. The parametric software gives unlimited control of the joint system based on the programmed relationships between the differentiations of each unique bamboo connection. Fabricating each unique joint gives a secure connection at each intersection facilitating an adaptable architecture, whilst reducing construction waste. This paper introduces the groundwork for the implementation of “on-site” manufacturing of a framework joint system. The manufacturing utilises the power and performance of a parametric platform with the technology of bespoke three-dimensionally printed joints – a flexible system that can respond to organic materials and natural external conditions
keywords	Parametric design; Three-dimensional printing; Bamboo construction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_771
id	sigradi2016_771
authors	Raspall, Felix; Ba?ón, Carlos
year	2016
title	vMESH : How to print Architecture?
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.394-398
summary	The use of 3D printing in architectural research, education and practice has been almost exclusively destined to produce physical representations – models— of designed building. Recent advances in Additive Manufacturing (AM) have exponentially increased the mechanical properties of 3D printed parts, opening new opportunities for this technology to be directly applied to functional architectural components at an increasingly larger scale. Thus, this paper examines the design, structural and aesthetic implications, as well as the feasibility of advanced 3D printing technologies in the production of functional architectural components through the design and prototyping of a customized, non-regular spatial frame system.
keywords	Metal 3D Printing, Volumetric Mesh, Digital Fabrication, Parametric Design, Spatial Frames
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2016_510
id	sigradi2016_510
authors	Tapia, Clara
year	2016
title	Análisis comparativo de prendas y estructuras textiles realizadas por impresión 3D [Comparative analysis of the structures of 3D printed clothes and textiles]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.331-336
summary	This work is an analysis about contemporary 3D printed textiles and clothes. The goal is to facilitate the work of those who want to design clothes by giving them an organized and categorized map of this new features. The categorization it is done by typologies focused into identify the minimum unit of the structures and the way that they grow to build the surfaces. As a conclusion this papers includes a discussion about what is digital fabrication good for, and the possibilities of personalized production.
keywords	3D Printing; Textiles Structures; Fashion; Parametric Design; Personalized Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2016_571
id	sigradi2016_571
authors	Teixeira, Deglaucy Jorge; Maritan, Bruna Bertolazi; Gonçalves, Berenice S.
year	2016
title	Um modelo de fluxo para design de livro digital infantil [A flow model for children's digital book design]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.78-85
summary	The fundamentals of traditional publishing design are insufficient to support the children's book app design - book application format that brings a similar layout to printed picturebook and interactivities that resemble video games. So, how to structure your design process? And what approaches able to involve multimedia and interactivity to guide this design process? Through an exploratory, analytical and comparative research, we investigated graphic design and editorial theories, hypermedia design and game design. It was elaborated a proposal flow for digital children's book design.
keywords	Children's book apps; Design; Process
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	acadia16_424
id	acadia16_424
authors	Twose, Simon; du Chatenier, Rosa
year	2016
title	Experimental Material Research - Digital Chocolate
doi	https://doi.org/10.52842/conf.acadia.2016.424
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 424-431
summary	This research investigates the aesthetics of a shared agency between humans, computation and physical material. ‘Chocolate’ is manipulated in physical and virtual space simultaneously to extract aesthetic conditions that are a sum of human and non-human relations. This is an attempt to further the knowledge of designing, giving physical and digital materials force in determining their own aesthetics. The research springs from work in speculative aesthetics, particularly N. Katherine Hayles’s OOI (object-oriented inquiry) and Graham Harman’s OOO (object-oriented ontology) and explores how these ideas impact contemporary computational architectural design. To study this, a simple material has been chosen, chocolate, and used as a vehicle to investigate the dynamics of physical and digital materials and their shared/differing ‘resistances to human manipulation’ (Pickering 1995). Digital chocolate is ‘melted’ through virtual heat, and the results printed and cast in real chocolate, to be further manipulated in real space. The resistances and feedback of physical and digital chocolate to human ‘prodding’ (Hayles 2014) are analyzed in terms of a material’s qualities and tendencies in digital space versus those in physical space. Observations from this process are used to speculate on an aesthetics where humans, computation and physical material are mutually agential. This research is a pilot for a larger study taking on more complex conditions, such as building and cities, with a view to broadening how aesthetics is understood in architectural design. The contribution of this research to the field of architectural computation is thus in areas of aesthetic speculation and human/non-human architectural authorship.
keywords	object-oriented inquiry, speculative aesthetics, mutual agency, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia16_298
id	acadia16_298
authors	Yu, Lei; Huang, Yijiang; Zhongyuan, Liu; Xiao, Sai; Liu, Ligang; Song, Guoxian; Wang, Yanxin
year	2016
title	Highly Informed Robotic 3D Printed Polygon Mesh: A Nobel Strategy of 3D Spatial Printing
doi	https://doi.org/10.52842/conf.acadia.2016.298
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 298-307
summary	Though robotic 3D printing technology is currently undergoing rapid development, most of the research and experiments are still based on a bottom up layering process. This paper addresses long term research into a robotic 3D printed polygon mesh whose struts are directly built up and joined together as rapidly generated physical wireframes. This paper presents a novel “multi-threaded” robotic extruder, as well as a technical strategy to create a “printable” polygon mesh that is collision-free during robotic operation. Compared to standard 3D printing, architectural applications demand much larger dimensions at human scale, geometrically lower resolution and faster production speed. Taking these features into consideration, 3D printed frameworks have huge potential in the building industry by combining robot arm technology together with FDM 3D printing technology. Currently, this methodology of rapid prototyping could potentially be applied on pre-fabricated building components, especially ones with uniform parabolic features. Owing to the mechanical features of the robot arm, the most crucial challenge of this research is the consistency of non-stop automated control. Here, an algorithm is employed not only to predict and solve problems, but also to optimize for a highly efficient construction process in coordination of the robotic 3D printing system. Since every stroke of the wireframe contains many parameters and calculations in order to reflect its native organization and structure, this robotic 3D printing process requires processing an intensive amount of data in the back stage.
keywords	interdisciplinary design, craft in design computation, digital fabrication
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	sigradi2016_537
id	sigradi2016_537
authors	Abreu, Sandro Canavezzi de; Vasconcelos, Guilherme Nunes de; Stralen, Mateus van
year	2016
title	Meta-Lab: programação de um laboratório interativo [Metal-Lab: the programming of an interactive lab]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.769-775
summary	Here we discuss the technological and theoretical issues that conform the restructuring proposal of the Computer Laboratory of Escola de Arquitetura e Urbanismo da UFMG, reconfiguring it in what we call “Meta-Lab”: a space composed of programmable modules that make up the so called Sistema Hidra(!), a system structured in three levels (sensory, processor and actuator level) which receives environmental information via sensors, processes these information and changes the environment using actuators. We will address in more detail the processing level, a fundamental layer for enabling the implementation of “interactive permanency” through continuous reprogramming of interactions in Meta-Lab.
keywords	Interactivity; Combinatory; Interactive Architecture
series	other
type	normal paper
email
last changed	2017/06/21 14:52

_id	caadria2016_777
id	caadria2016_777
authors	Aditra, Rakhmat F. and Andry Widyowijatnoko
year	2016
title	Combination of mass customisation and conventional construction: A case study of geodesic bamboo dome
doi	https://doi.org/10.52842/conf.caadria.2016.777
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 777-786
summary	With the development of advance fabrication, several digi- tal fabrication approaches have been developed. These approaches en- able better form exploration than the conventional manufacturing pro- cess. But, the built examples mostly rely on advance machinery which was not familiar or available in developed country where construction workers are still abundant. Meanwhile, much knowledge gathers in the field practice. This research is aimed to explore an alternative con- struction workflow and method with the combination of mass custom- ization and conventional construction method and to propose the structure system that emphasized this alternative workflow and meth- od. Lattice structure was proposed. The conventional construction method was used in the struts production and mass customization method, laser cutting, and was used for connection production. The algorithmic process was used mainly for data mining, details design, and component production. The backtracking was needed to be pre- dicted and addressed previously. Considerations that will be needed to be tested by further example are on the transition from the digital pro- cess to the manual process. Next research could be for analysing the other engineering aspect for this prototype and suggesting other struc- tural system with more optimal combination of conventional construc- tion and mass customization.
keywords	Mass customisation; algorithmic design; digital fabrication; geodesic dome; lattice structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_048
id	ascaad2016_048
authors	Al Shiekh, Bassam
year	2016
title	Arabic Calligraphy and Parametric Architecture - Translation from a calligraphic force to an architectural form
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 469-482
summary	This paper describes an on-going research that unites two distinct and seemingly unrelated interests. One is Arabic calligraphy and the other is parametric architecture. The effort is to integrate these interests and, in doing so, balance cultural issues with technological ones, traditional with contemporary and spiritual with material. Moreover, this paper is inspired by Arabic calligraphy and its influence on Zaha Hadid’s designs; it is invigorated by parametric systems and their capacity as a source of architectural forms. This paper will observe the rising importance of computation technologies to architecture, which has always been a form of negotiation between ‘function and fiction’ and ‘force and form’. The paper proposes a Parametric Calligraphic Machine that simultaneously produces, connects and separates calligraphic surfaces, calligraphic images and calligraphic reality. Therefore, the goal is to examine this hypothesis in order to produce a set of techniques, tools and methods that inform the three-dimensional design process of Arabic calligraphy’s contemporary possibilities by addressing a process description rather than a state description of creating calligraphic images and calligraphic surfaces. The theoretical approach highlights issues pertaining to calligraphy, spatiality, translation, generative systems, parametric design, visual structure, force and form.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
doi	https://doi.org/10.52842/conf.caadria.2016.631
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: