Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_191
id	ecaade2016_191
authors	Di Mascio, Danilo, Chiuini, Michele, Fillwalk, John and Pauwels, Pieter
year	2016
title	3D Digital Reconstructions of Lost Buildings - A first critical framing
doi	https://doi.org/10.52842/conf.ecaade.2016.2.511
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 511-520
summary	This paper presents a first critical framing of 3D digital reconstructions of lost buildings, hence focusing on reconstructions using 3D models. This critical framing is constituted by reflections on definitions, concepts, methodologies and digital technologies. Much experimentation in the digital reconstruction of lost buildings has produced valuable results during the last twenty years, but the variety of methods, software types, and purposes should be reorganized into clear operational protocols to allow sharing of information and collaboration across disciplines. We have therefore investigated the diverse approaches towards digital reconstructions of lost buildings and found that digital reconstructions are not typically aimed at simple visualizations: they are often further developed in virtual environments, information systems and tools for simulations and analysis. In this sense they are not products but instruments for further research and/or heritage conservation. Counter the large number of theoretical positions, methods and tools specific to different disciplines, such as architecture and archaeology, we can find the almost total absence of a comprehensive critical assessment. This paper, which is part of a larger project, intends to open and articulate a debate on how to define, analyze and critically systematize the methodologies for the digital reconstruction of lost buildings.
wos	WOS:000402064400051
keywords	Digital reconstruction; lost buildings; 3d modelling; information systems; virtual environments.
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ecaade2016_017
id	ecaade2016_017
authors	Androutsopoulou, Eirini
year	2016
title	Autopoietic Features of the Urban Body's Elements - Similarity studies on network elements' attributes
doi	https://doi.org/10.52842/conf.ecaade.2016.2.071
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 71-78
summary	The methodology presented in this paper is grounded on the analysis and relational relocation of attributes of the urban body, deriving from the reconstruction of the urban body as a network configuration. In contrast to the hierarchical constructions, network constructions allow for multiple connections between elements, therefore being closer to the complexity of the associative forces found in the structure of the urban body.Similarity function is applied in an attempt to restructure those attributes of the urban body which emerge from the position of each element (node) in relation to other elements of the network and not from the Cartesian topology. Being able to represent material elements as nodes, counter-bodies deriving from autopoietic -network functions emerge, allowing for an inquiry in what concerns the autopoietic features of the urban body in general, focusing on the application of autopoietic functions which generate the urban body parts and components and on the multiplicity of elements' structure, in terms of association of crowds of elements and sets of attributes' values, aiming at the redefinition of proximity as similarity and of remoteness as difference.
wos	WOS:000402064400006
keywords	Similarity; Autopoiesis; urban body; Attributes; network; complex systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_431
id	sigradi2016_431
authors	Dantas, Paulo Victor de Farias; Ribeiro, Thiago Rafael Rodrigues; Bruscato, Underléa Miotto; Silva, Fabio Pinto da
year	2016
title	Protótipo de dispositivo facilitador para digitalizaç?o 3D por fotogrametria com smartphones [Prototype of a facilitating device for photogrammetric 3D acquisition with smartphones]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.297-304
summary	This paper presents the prototyping of a facilitating device for photogrammetric 3D acquisition with smartphones. It aims to deliver basic photogrammetry knowledge and a low-cost do-it-yourself alternative to commercial 3D scanning systems, consisting of interlocked laser cut parts and free third-party software. The proposed device was tested, and the resulting 3D model was qualitatively compared to those obtained by a handheld photogrammetry approach, a conoscopic laser scanning device, and a portable structured-light scanning device. The proposed device provides camera stabilization and homogenous distribution of image acquisition which result in improved 3D reconstruction quality, compared to a handheld approach
keywords	Digital fabrication; 3D scanning; Close-range photogrammetry; Fab Lab; Facilitating devices
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_042
id	ascaad2016_042
authors	Goud, Srushti
year	2016
title	Parametrizing Indian Karnata-Dravida Temple Using Geometry
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 409-420
summary	The Karnata-Dravida temple tradition flourished and evolved for 700 years. The evolution of the typology was demonstrated through the structure. However, as the Shastras or ancient texts proclaim, the underlying principles of geometry remain unchanged. Geometry and the unchanging principles of construction made the architects experiment with form, material and ornamentation. Geometry does not only mean shapes or two dimensional diagrams but it is a rule to amalgamate all the elements to form a dynamic form of a temple. The paper validates the use of geometry through an evolving sequence of Karnata-Dravida temples with the help of an analytical model created using the grasshopper software. The components of the model are based on the geometric rule (the basis for parametrizing) and parameters of the algorithm – plan forms, organizational compositions, vimana or superstructure composition – which result in a geometry. Even though building science is an old tradition, the use of computational procedures reveals the predictable nature of temples in the Dravidian clan and enables the analysis of existing temples, development of new possibilities or evolution of interpreted forms. Hence, enriching the existing understandings of previous scholarships in the field of temple architecture with an entirely new system of interpretation. In the age of technology where analytics plays a crucial role in almost all sectors, ancient temple architecture in India unfortunately falls behind when it comes to computational methods of restoration or reconstruction. This research questions the applicability of computational technology as a facilitator in preserving or reconstructing existing temples while maintaining its creative liberty.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2016_147
id	ecaade2016_147
authors	Tamke, Martin, Zwierzycki, Mateusz, Evers, Henrik Leander, Ochmann, Sebastian, Vock, Richard and Wessel, Raoul
year	2016
title	Tracking Changes in Buildings over Time - Fully Automated Reconstruction and Difference Detection of 3d Scan and BIM files
doi	https://doi.org/10.52842/conf.ecaade.2016.2.643
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 643-651
summary	Architectural and Engineering Communities are interested in the detection of differences between different representations of the same building. These can be the differences between the design and the as-built-state of a building, or the detection of changes that occur over time and that are documented by consecutive 3D scans. Current approaches for the detection of differences between 3D scans and 3D building models are however laborious and work only on the level of a building element. We demonstrate a novel highly automated workflow to detect differences between representations of the same building. We discuss the underlying tools and methods and the ways to communicate deviations and differences in an appropriate manner and evaluate our approach with a rich set of real world datasets.
wos	WOS:000402064400065
keywords	3d scan; BIM; Machine learning; Point Clouds; Big Data
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2016_110
id	ecaade2016_110
authors	Verniz, Debora, Mateus, Luis, Duarte, José Pinto and Ferreira, Victor
year	2016
title	3D Reconstruction Survey of Complex Informal Settlements - Towards an understanding of the genesis of form
doi	https://doi.org/10.52842/conf.ecaade.2016.2.365
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 365-370
summary	The Brazilian favelas are a kind of informal settlements characterized by steep topography and a maze-like structure. Like many other settlements of its kind that are prevalent in developing countries today, they are often considered a problem rather than a solution. This paper is part of a larger research that taking a realistic stand aims to understand the formal structure of this city-shaping force and capture it into a rule-based, computational model. The goal is to develop appropriate requalifying procedures to intervene in informal settlements and guidelines for designing formal settlements in similar sites. The paper is focused on the use of digital technologies to reconstruct in 3D a favela used as a case study, a preliminary step to understand its formal structure and create a computational model.
keywords	3D reconstruction; informal settlement; Santa Marta; SFM; 3D Point Cloud
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2016_797
id	caadria2016_797
authors	Agusti?-Juan, Isolda and Guillaume Habert
year	2016
title	An environmental perspective on digital fabrication in architecture and construction
doi	https://doi.org/10.52842/conf.caadria.2016.797
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 797-806
summary	Digital fabrication processes and technologies are becom- ing an essential part of the modern product manufacturing. As the use of 3D printing grows, potential applications into large scale processes are emerging. The combined methods of computational design and robotic fabrication have demonstrated potential to expand architectur- al design. However, factors such as material use, energy demands, du- rability, GHG emissions and waste production must be recognized as the priorities over the entire life of any architectural project. Given the recent developments at architecture scale, this study aims to investi- gate the environmental consequences and opportunities of digital fab- rication in construction. This paper presents two case studies of classic building elements digitally fabricated. In each case study, the projects were assessed according to the Life Cycle Assessment (LCA) frame- work and compared with conventional construction with similar func- tion. The analysis highlighted the importance of material-efficient de- sign to achieve high environmental benefits in digitally fabricated architecture. The knowledge established in this research should be di- rected to the development of guidelines that help designers to make more sustainable choices in the implementation of digital fabrication in architecture and construction.
keywords	Digital fabrication; LCA; sustainability; environment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_079
id	ecaade2016_079
authors	Cheng, Chi-Li and Hou, June-Hao
year	2016
title	Biomimetic Robotic Construction Process - An approach for adapting mass irregular-shaped natural materials
doi	https://doi.org/10.52842/conf.ecaade.2016.1.133
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 133-142
summary	Beaver dams are formed by two main processes. One is that beavers select proper woods for constructing. The other one is that streams aggregate those woods to be assembled. Using this approach to construction structure is suitable for natural environment. In this paper, we attempt to develop a construction process which is suitable for all-terrain construction robot in the future. This construction process is inspired by beavers' construction behavior in nature. Beavers select proper sticks to make the structure stable. We predict that particular properties of sticks contribute gravity-driven assembly of wood structure. Thus, we implement the system with machine learning to find proper properties of sticks to improve selection mechanism of construction process. During this construction process, 3D scanner on robotic arm scans and recognizes sticks on terrain, and then robot will select proper sticks and place them. After placement, the system will scan and record the results for learning mechanism.
wos	WOS:000402063700015
keywords	Biomimetic Design; Machine Learning; Natural Material; Point Cloud Analysis; Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2016_441
id	sigradi2016_441
authors	Flor?ncio, Eduardo Quintella; Ferreira Segundo, Dilson Batista; Quintella, Ivvy Pedrosa Cavalcante Pessôa
year	2016
title	O futuro do processo construtivo? A impress?o 3d em concreto e seu impacto na concepç?o e produç?o da arquitetura [The future of constructive process? The 3d concrete printing and its impact on architectural conception and production]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.305-309
summary	This article aims to discuss the 3D concrete printing technology for use in construction, which promises to generate economic gains and benefits for the environment. It also search for a potential impact of this technology over the current architecture design and construction methods, assessing its viability opposite the context of the research and practical construction in Brazil. From the partial results of the analysis, listed out to potential and difficulties related to the implementation of this technology.
keywords	3D concrete printing; automated construction; digital fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_053
id	ecaade2017_053
authors	Gül, Leman Figen
year	2017
title	Studying Architectural Massing Strategies in Co-design - Mobile Augmented Reality Tool versus 3D Virtual World
doi	https://doi.org/10.52842/conf.ecaade.2017.2.703
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 703-710
summary	Researchers attempt to offer new design tools and technologies to support design process facilitating alternative visualization and representation techniques. This paper describes a comparison study that took place in the Department of Architecture, at the Istanbul Technical University between 2016-2017. We compare when architects designed mass volumes of buildings in an marker-based mobile Augmented Reality (AR) application with that of when they used a collaborative 3D Virtual World. The massing strategy in the AR environment was an additive approach that is to collaboratively design the small parts to make the whole. Alignment and arrangement of the parts were not the main concerns of the designers in AR, instead the functional development of the design proposal, bodily engagements with the design representation, framing and re-framing of the given context and parameters become the discussion topics.
keywords	Augmented reality, virtual world, massing strategies; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2016_243
id	ecaade2016_243
authors	Gül, Leman Figen and Hal?c?, Süheyla Müge
year	2016
title	Collaborative Design with Mobile Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2016.1.493
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 493-500
summary	In early design process, designers employ several media for externalizations of their design ideas which facilitate decision making, discussion and evaluation. Especially models are the most common representation tools and are used generally to understand and make spatial reasoning on the design ideas. Besides the traditional methods, today, the technological developments bring new ways for collaboration and design in 3D; the mobile augmented reality (MAR) technology is one of them. MAR is augmented reality technology which is provided by mobile devices. This study focuses on the early design process of collaborative designers' communication when they are working with the MAR technology. We developed a MAR environment for designers, and conducted an experiment to understand the key elements of the interaction of the designers with the interface. The communication and interaction of the designers are analyzed using the protocol analysis method. The results show that the MAR technology supports the co-design activities encouraging the designers to manipulate the created artefact. The results of the study would be indicative for future studies.
wos	WOS:000402063700054
keywords	collaborative design; mobile augmented reality; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia16_318
id	acadia16_318
authors	Huang, Alvin
year	2016
title	From Bones to Bricks: Design the 3D Printed Durotaxis Chair and La Burbuja Lamp
doi	https://doi.org/10.52842/conf.acadia.2016.318
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 318-325
summary	Drawing inspiration from the variable density structures of bones and the self-supported cantilvers of corbelled brick arches, the Durotaxis Chair and the La Burbuja lamp explore a material-based design process by responding to the challenge of designing a 3D print, rather than 3D printing a design. As such, the fabrication method and materiality of 3D printing define the generative design constraints that inform the geometry of each. Both projects are seen as experiments in the design of 3D printed three-dimensional space packing structures that have been designed specifically for the machines by which they are manufactured. The geometry of each project has been carefully calibrated to capitalize on a selection of specific design opportunities enabled by the capabilities and constraints of additive manufacturing. The Durotaxis Chair is a half-scale prototype of a fully 3D printed multi-material rocking chair that is defined by a densely packed, variable density three-dimensional wire mesh that gradates in size, scale, density, color, and rigidity. Inspired by the variable density structure of bones, the design utilizes principal stress analysis, asymptotic stability, and ergonomics to drive the logics of the various gradient conditions. The La Burbuja Lamp is a full scale prototype for a zero-waste fully 3D printed pendant lamp. The geometric articulation of the project is defined by a cellular 3D space packing structure that is constrained to the angles of repose and back-spans required to produce un-supported 3D printing.
keywords	parametic design, digital fabrication, structural analysis, additive manufacturing, 3d printing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia16_470
id	acadia16_470
authors	Sollazzo, Aldo; Baseta, Efilena; Chronis, Angelos
year	2016
title	Symbiotic Associations
doi	https://doi.org/10.52842/conf.acadia.2016.470
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 470-477
summary	Soil contamination poses a series of important health issues, following years of neglect, constant industrialization, and unsustainable agriculture. It is estimated that 30% of the total cultivated soil in the world will convert to degraded land by 2020 (Rashid et al. 2016). Finding suitable treatment technologies to clean up contaminated water and soil is not trivial, and although technological solutions are sought, many are both resource-expensive and potentially equally unsustainable in long term. Bacteria and fungi have proved efficient in contributing to the bioavailability of nutrients and in aggregating formation in degraded soils (Rashid et al. 2016). Our research aims to explore the possible implementation of physical computing, computational analysis, and digital fabrication techniques in the design and optimization of an efficient soil remediation strategy using mycelium. The study presented here is a first step towards an overarching methodology for the development of an automated soil decontamination process, using an optimized bio-cell fungus seed that can be remotely populated using aerial transportation. The presented study focuses on the development of a methodology for capturing and modeling the growth of the mycelium fungus using photogrammetry-based 3D scanning and computational analysis techniques.
keywords	computational design, photogrammetry, simulation, mycelium, 3d scanning, growth strategies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	sigradi2016_510
id	sigradi2016_510
authors	Tapia, Clara
year	2016
title	Análisis comparativo de prendas y estructuras textiles realizadas por impresión 3D [Comparative analysis of the structures of 3D printed clothes and textiles]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.331-336
summary	This work is an analysis about contemporary 3D printed textiles and clothes. The goal is to facilitate the work of those who want to design clothes by giving them an organized and categorized map of this new features. The categorization it is done by typologies focused into identify the minimum unit of the structures and the way that they grow to build the surfaces. As a conclusion this papers includes a discussion about what is digital fabrication good for, and the possibilities of personalized production.
keywords	3D Printing; Textiles Structures; Fashion; Parametric Design; Personalized Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	caadria2016_125
id	caadria2016_125
authors	Chen, I-Chih and June-Hao Hou
year	2016
title	Design with bamboo bend: Bridging natural material and computational design
doi	https://doi.org/10.52842/conf.caadria.2016.125
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 125-133
summary	Bamboo is a high potential alternative solution for substi- tuting industrial material with its natural characteristics, economical and environmental aspects. However, one of the biggest challenges for natural materials to be used in computational designed is the control- lability due to its unevenness nature. The other gap is the lack of ma- terial parameters that might be bridged by analysing data acquired from conventional tests. This research studied the raw bamboo strip and its natural forming from bending, by using sampling points and curvature reconstruction. The parametric models of bamboo strips were then constructed to represent its material behaviours for form prediction, material selection, and simulation in parametric design. It also serves as an assistive method for material selection when crafting with bamboo bend.
keywords	Bamboo; bending; material computation; digital crafting
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2016_301
id	caadria2016_301
authors	Datta, S.; T. W. Chang and J. Hollick
year	2016
title	Curating architectural collections: Interaction with immersive stereoscopic visualisation
doi	https://doi.org/10.52842/conf.caadria.2016.301
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 301-310
summary	We present our research on the use of immersive stereo- scopic visualisation in interaction with collections of architectural rep- resentations. We investigate the processing and visualisation of multi- ple model representations from architectural datasets. We develop two models for locating collections of datasets in spatial contexts, namely a realistic gallery and a synthetic landscape. We evaluate and report the qualitative interactive experience with two forms of contextual in- teraction within a novel stereoscopic immersive visualisation (cylin- drical projection) environment. The use of immersive stereoscopic visualisation conveys aspects and dimensions of the collections that would not be possible without the forms of contextual interaction, the gallery metaphor and the synthetic landscape to interact with the ar- chitectural collections. The combination of abstract representations with realistic sense of scale and interaction provide the user with an immersive experience to convey the collective form.
keywords	Digital data acquisition; architectural reconstruction; geometry processing and algorithms; immersive stereoscopic visualisation; human computer interaction
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2016_040
id	ascaad2016_040
authors	Teba, Tarek; Dimitris Theodossopoulos
year	2016
title	A Graphic Reconstruction Methodology for the Conservation of Cultural Heritage
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 385-398
summary	Virtual modelling enables the testing of conceptual, constructional and environmental aspects, prior to embarking on the in situ construction process. This is being gradually implemented in architectural heritage, particularly with monuments that are at risk. Various international heritage conventions have emphasised the great role that virtual reconstruction plays in building a comprehensive repository of the selected case studies. This repository would be used for educational and professional purposes as well as raising community awareness of heritage values and conservation. On the other hand, only few genuine attempts have been made to develop a virtual reconstruction approach in a conservation project to integrate concept, materiality or spatial quality of the conservation proposal into the perception of the heritage cultural values.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2016_026
id	ecaade2016_026
authors	Agkathidis, Asterios
year	2016
title	Implementing Biomorphic Design - Design Methods in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2016.1.291
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 291-298
summary	In continuation to Generative Design Methods, this paper investigates the implementation of Biomorphic Design, supported by computational techniques in undergraduate, architectural studio education. After reviewing the main definitions of biomorphism, organicism and biomimicry synoptically, we will assess the application of a modified biomorphic method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of design outputs, student performance as well as moderators and external examiners reports initiate a constructive debate about accomplishments and failures of a design methodology which still remains alien to many undergraduate curricula.
wos	WOS:000402063700033
keywords	CAAD Education; Strategies, Shape Form and Geometry; Generative Design; Design Concepts
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: