Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 68

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_174
id	acadia16_174
authors	Moorman, Andrew; Liu, Jingyang; Sabin, Jenny E.
year	2016
title	RoboSense: Context-Dependent Robotic Design Protocols and Tools
doi	https://doi.org/10.52842/conf.acadia.2016.174
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 174-183
summary	While nonlinear concepts are widely applied in analysis and generative design in architecture, they have not yet convincingly translated into the material realm of fabrication and construction. As the gap between digital design model, shop drawing, and fabricated result continues to diminish, we seek to learn from fabrication models and natural systems that do not separate code, geometry, pattern, material compliance, communication, and form, but rather operate within dynamic loops of feedback, reciprocity, and generative fabrication. Three distinct, but connected problems: 1) Robotic ink drawing; 2) Robotic wine pouring and object detection; and 3) Dynamically Adjusted Extrusion; were addressed to develop a toolkit including software, custom digital design tools, and hardware for robotic fabrication and user interaction in cyber-physical contexts. Our primary aim is to simplify and consolidate the multiple platforms necessary to construct feedback networks for robotic fabrication into a central and intuitive programming environment for both the advanced to novice user. Our experimentation in prototyping feedback networks for use with robotics in design practice suggests that the application of this knowledge often follows a remarkably consistent profile. By exploiting these redundancies, we developed a support toolkit of data structures and routines that provide simple integrated software for the user-friendly programming of commonly used roles and functionalities in dynamic robotic fabrication, thus promoting a methodology of feedback-oriented design processes.
keywords	online programming, cyber-physical systems, computational design, robotic fabrication, human-robot interaction
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia19_392
id	acadia19_392
authors	Steinfeld, Kyle
year	2019
title	GAN Loci
doi	https://doi.org/10.52842/conf.acadia.2019.392
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 392-403
summary	This project applies techniques in machine learning, specifically generative adversarial networks (or GANs), to produce synthetic images intended to capture the predominant visual properties of urban places. We propose that imaging cities in this manner represents the first computational approach to documenting the Genius Loci of a city (Norberg-Schulz, 1980), which is understood to include those forms, textures, colors, and qualities of light that exemplify a particular urban location and that set it apart from similar places. Presented here are methods for the collection of urban image data, for the necessary processing and formatting of this data, and for the training of two known computational statistical models (StyleGAN (Karras et al., 2018) and Pix2Pix (Isola et al., 2016)) that identify visual patterns distinct to a given site and that reproduce these patterns to generate new images. These methods have been applied to image nine distinct urban contexts across six cities in the US and Europe, the results of which are presented here. While the product of this work is not a tool for the design of cities or building forms, but rather a method for the synthetic imaging of existing places, we nevertheless seek to situate the work in terms of computer-assisted design (CAD). In this regard, the project is demonstrative of a new approach to CAD tools. In contrast with existing tools that seek to capture the explicit intention of their user (Aish, Glynn, Sheil 2017), in applying computational statistical methods to the production of images that speak to the implicit qualities that constitute a place, this project demonstrates the unique advantages offered by such methods in capturing and expressing the tacit.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia20_238
id	acadia20_238
authors	Zhang, Hang
year	2020
title	Text-to-Form
doi	https://doi.org/10.52842/conf.acadia.2020.1.238
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 238-247.
summary	Traditionally, architects express their thoughts on the design of 3D architectural forms via perspective renderings and standardized 2D drawings. However, as architectural design is always multidimensional and intricate, it is difficult to make others understand the design intention, concrete form, and even spatial layout through simple language descriptions. Benefiting from the fast development of machine learning, especially natural language processing and convolutional neural networks, this paper proposes a Linguistics-based Architectural Form Generative Model (LAFGM) that could be trained to make 3D architectural form predictions based simply on language input. Several related works exist that focus on learning text-to-image generation, while others have taken a further step by generating simple shapes from the descriptions. However, the text parsing and output of these works still remain either at the 2D stage or confined to a single geometry. On the basis of these works, this paper used both Stanford Scene Graph Parser (Sebastian et al. 2015) and graph convolutional networks (Kipf and Welling 2016) to compile the analytic semantic structure for the input texts, then generated the 3D architectural form expressed by the language descriptions, which is also aided by several optimization algorithms. To a certain extent, the training results approached the 3D form intended in the textual description, not only indicating the tremendous potential of LAFGM from linguistic input to 3D architectural form, but also innovating design expression and communication regarding 3D spatial information.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2016_125
id	caadria2016_125
authors	Chen, I-Chih and June-Hao Hou
year	2016
title	Design with bamboo bend: Bridging natural material and computational design
doi	https://doi.org/10.52842/conf.caadria.2016.125
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 125-133
summary	Bamboo is a high potential alternative solution for substi- tuting industrial material with its natural characteristics, economical and environmental aspects. However, one of the biggest challenges for natural materials to be used in computational designed is the control- lability due to its unevenness nature. The other gap is the lack of ma- terial parameters that might be bridged by analysing data acquired from conventional tests. This research studied the raw bamboo strip and its natural forming from bending, by using sampling points and curvature reconstruction. The parametric models of bamboo strips were then constructed to represent its material behaviours for form prediction, material selection, and simulation in parametric design. It also serves as an assistive method for material selection when crafting with bamboo bend.
keywords	Bamboo; bending; material computation; digital crafting
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2016_026
id	ecaade2016_026
authors	Agkathidis, Asterios
year	2016
title	Implementing Biomorphic Design - Design Methods in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2016.1.291
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 291-298
summary	In continuation to Generative Design Methods, this paper investigates the implementation of Biomorphic Design, supported by computational techniques in undergraduate, architectural studio education. After reviewing the main definitions of biomorphism, organicism and biomimicry synoptically, we will assess the application of a modified biomorphic method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of design outputs, student performance as well as moderators and external examiners reports initiate a constructive debate about accomplishments and failures of a design methodology which still remains alien to many undergraduate curricula.
wos	WOS:000402063700033
keywords	CAAD Education; Strategies, Shape Form and Geometry; Generative Design; Design Concepts
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia16_152
id	acadia16_152
authors	Ahlquist, Sean
year	2016
title	Generative Robotics
doi	https://doi.org/10.52842/conf.acadia.2016.152
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 152-153
series	ACADIA
type	introduction
email
last changed	2022/06/07 07:54

_id	ascaad2016_048
id	ascaad2016_048
authors	Al Shiekh, Bassam
year	2016
title	Arabic Calligraphy and Parametric Architecture - Translation from a calligraphic force to an architectural form
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 469-482
summary	This paper describes an on-going research that unites two distinct and seemingly unrelated interests. One is Arabic calligraphy and the other is parametric architecture. The effort is to integrate these interests and, in doing so, balance cultural issues with technological ones, traditional with contemporary and spiritual with material. Moreover, this paper is inspired by Arabic calligraphy and its influence on Zaha Hadid’s designs; it is invigorated by parametric systems and their capacity as a source of architectural forms. This paper will observe the rising importance of computation technologies to architecture, which has always been a form of negotiation between ‘function and fiction’ and ‘force and form’. The paper proposes a Parametric Calligraphic Machine that simultaneously produces, connects and separates calligraphic surfaces, calligraphic images and calligraphic reality. Therefore, the goal is to examine this hypothesis in order to produce a set of techniques, tools and methods that inform the three-dimensional design process of Arabic calligraphy’s contemporary possibilities by addressing a process description rather than a state description of creating calligraphic images and calligraphic surfaces. The theoretical approach highlights issues pertaining to calligraphy, spatiality, translation, generative systems, parametric design, visual structure, force and form.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_043
id	ascaad2016_043
authors	Alacam, Sema; Orkan. Z. Güzelci
year	2016
title	Computational Interpretations of 2D Muqarnas Projections in 3D Form Finding
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 421-430
summary	In the scope of this study, we developed an algorithm to generate new 3D geometry (interpretation) of a given or generated planar projection of a muqarnas in a digital 3D modelling software (Rhinoceros), its visual scripting environment (VSE) Grasshopper and also the Python programming language. Differing from traditional methods, asymmetrical form alternatives are examined. In other words, 2D projections of muqarnas were only used as an initial geometrical pattern for generative form finding explorations. This study can be considered an attempt to explore new relations, rules and vocabulary through algorithmic form finding experiments derived from 2D muqarnas projections.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_008
id	ascaad2016_008
authors	Armstrong, Logan; Guy Gardner and Christina James
year	2016
title	Evolutionary Solar Architecture - Generative Solar Design Through Soft Forms and Rigid Logics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 55-64
summary	This paper describes the development of a workflow for the production of a net zero off-grid research cabin. The workflow deploys a number of affiliated parametric software packages as a form finding tool for the exterior envelope of this structure, with a focus on passive solar design as a generative formal driver. The design was required to incorporate the spatial and programmatic needs of the users in a compact, barrier free, net zero building. Simultaneously, the research question asked the designers to harness the potential of digital design in the consideration of future fabrication techniques, in order to optimize the building’s performance and the speed and quality of assembly once the project moves into construction. Parameters considered include solar exposure, external surface area, cost, fabrication, functionality, and aesthetic criteria. This project was developed by a multidisciplinary team of graduate students at the University of Calgary.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	acadia16_432
id	acadia16_432
authors	Beaman, Michael Leighton
year	2016
title	Landscapes After The Bifurcation of Nature: Models for Speculative Landformations
doi	https://doi.org/10.52842/conf.acadia.2016.432
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 432-439
summary	Landformations have not historically been the purview of design production or intervention. Whether it is the spatial extensions in which they emerge, the temporal extensions in which they operate, the complexities of their generative and sustaining processes, or a cultural and institutional deference to a notion of natural processes, designers as individuals or design as a discipline has not treated landformation as an area of design inquiry. But the inability to grasp nature fully has not stopped geological-scale manipulation by humans. In fact, anthropogenic activity is responsible for the re-formation of more of the Earth’s surface than all other agents combined. And yet as designers we often disregard this transformation as a design problem, precisely because it eludes the artifices of information visualization employed by designers. This paper examines ongoing research into the generation of speculative landformations through an analysis of underlying geological and anthropogenic processes as the quantitative basis for creating generative computational models (figure 1). The Speculative Landformations Project posits human geological-scale activity as a design problem by expanding the operability and agency of environmental design practice through hybrid human/digital computations.
keywords	design decision-making, simulation and design optimization, responsive urban and landscape systems, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2016_199
id	ecaade2016_199
authors	Caetano, In?s and Leit?o, António
year	2016
title	Using Processing with Architectural 3D Modelling
doi	https://doi.org/10.52842/conf.ecaade.2016.1.405
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 405-412
summary	Although programming was considered a specialized task in the past, we have been witnessing an increasing use of algorithms in the architectural field, which has opened up a wide range of new design possibilities. This was possible in part due to programming languages that were designed to be easy to learn and use by designers and architects, such as Processing. Processing is widely used for academic purposes, whereas in the architectural practice it is not as used as other programming languages due to its limitations for 3D modeling. In this paper, we describe the use of an extended Processing implementation to generate three 3D models inspired in existing case studies, which can be visualized and edited in different CAD and BIM applications.
wos	WOS:000402063700045
keywords	Generative design; Programming; Processing; 3D modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_198
id	ecaade2016_198
authors	Caetano, In?s and Leit?o, António
year	2016
title	DrAFT: an Algorithmic Framework for Facade Design
doi	https://doi.org/10.52842/conf.ecaade.2016.1.465
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 465-474
summary	Architecture has always followed the times and their innovations and, currently, an architecture based on digital technologies has been emerging and has increasingly explored architectural facades. In this paper we use DrAFT, a computational framework for the generation and exploration of facade designs, to explore a set of different examples of building skins. DrAFT includes a classification of facades that helps in the identification of algorithms that best suits each design intent. After combining the algorithms provided by this framework, the designer can more easily explore the solution space of the intended design.
wos	WOS:000402063700051
keywords	Generative design; facade design; DrAFT framework; Rosetta
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201614207
id	ijac201614207
authors	Chaszar, Andre and Sam Conrad Joyce
year	2016
title	Generating freedom: Questions of flexibility in digital design and architectural computation
source	International Journal of Architectural Computing vol. 14 - no. 2, 167-181
summary	Generative processes and generative design approaches are topics of continuing interest and debate within the realms of architectural design and related fields. While they are often held up as giving designers the opportunity (the freedom) to explore far greater numbers of options/alternatives than would otherwise be possible, questions also arise regarding the limitations of such approaches on the design spaces explored, in comparison with more conventional, human-centric design processes. This article addresses the controversy with a specific focus on parametric-associative modelling and genetic programming methods of generative design. These represent two established contenders within the pool of procedural design approaches gaining increasingly wide acceptance in architectural computational research, education and practice. The two methods are compared and contrasted to highlight important differences in freedoms and limitations they afford, with respect to each other and to ‘manual’ design. We conclude that these methods may be combined with an appropriate balance of automation and human intervention to obtain ‘optimal’ design freedom, and we suggest steps towards finding that balance.
keywords	Design space exploration, parametric-associative modelling, genetic programming, mixed-initiative methods
series	journal
last changed	2016/06/13 08:34

_id	caadria2016_187
id	caadria2016_187
authors	Cruz, Camilo; Justyna Karakiewicz and Michael Kirley
year	2016
title	Towards the implementation of a composite Cellular Automata model for the exploration of design space
doi	https://doi.org/10.52842/conf.caadria.2016.187
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 187-196
summary	In this paper, we introduce a novel composite Cellular Au- tomata (CA) model to explore the space of design for human envi- ronments. Consisting of multiple, regularly spaced, interleaved 1D CA, our model provides a mechanism to evolve flexible spatial units, where the ‘cells’ are not defined as programmatic elements but as ‘form-making’ elements. The efficacy of this approach is evaluated via a standard methodology, typically used in the study of complex adaptive systems. We systematically examine the dynamics of a series of instances of the composite CA by varying initial conditions and transition rules. A measure of entropy is used to validate emergent patterns. Subsequently, we investigate whether the composite CA is capable of generating aggregate spatial units to match specific spatial configurations, using a well-known example as a benchmark. This phase allows us to bring an understanding of the results into the con- text of architectural design.
keywords	Cellular automata; generative design; design space
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2016_078
id	ecaade2016_078
authors	Das, Subhajit, Zolfagharian, Samaneh, Nourbakhsh, Mehdi and Haymaker, John
year	2016
title	Integrated Spatial-Structural Optimization in the Conceptual Design Stage of Project - A tool to generate and optimize design solutions aiding informed decision making for Architects, Engineers and Stakeholders
doi	https://doi.org/10.52842/conf.ecaade.2016.2.117
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 117-126
summary	Healthcare design projects require the careful integration of spatial and structural requirements. Today, design teams typically resolve these requirements in two separate, largely sequential steps. In the first step, architects leverage their experience and vision to develop space plans that address program and goals. Next, based on the architect's recommended design, engineers generate and refine a structural design to address structural requirements. This manual process produces a very limited number of non optimal spatial and structural design solutions with unclear decision rationale. This paper presents the Integrated Spatial-Structural Optimization (ISSO) decision making methodology. ISSO supports design teams by helping them generate, analyze, and manage a vast number of integrated spatial and structural solutions. ISSO features a bi-level optimization workflow that has been customized for spatial and structural design of healthcare facilities. The paper describes implementation in the Dynamo parametric modeling platform, and retrospective validation of the algorithm and workflow on an industry case study to demonstrate how ISSO can help design teams generate, analyze, and manage more conceptual design options.
wos	WOS:000402064400011
keywords	Spatial Design; Generative Design; Design Optimization; Facility Planning; Design Tools; Design Automation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia16_106
id	acadia16_106
authors	Das, Subhajit; Day, Colin; Hauck, John; Haymaker, John; Davis, Diana
year	2016
title	Space Plan Generator: Rapid Generationn & Evaluation of Floor Plan Design Options to Inform Decision Making
doi	https://doi.org/10.52842/conf.acadia.2016.106
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 106-115
summary	Design exploration in architectural space planning is often constrained by tight deadlines and a need to apply necessary expertise at the right time. We hypothesize that a system that can computationally generate vast numbers of design options, respect project constraints, and analyze for client goals, can assist the design team and client to make better decisions. This paper explains a research venture built from insights into space planning from senior planners, architects, and experts in the field, coupled with algorithms for evolutionary systems and computational geometry, to develop an automated computational framework that enables rapid generation and analysis of space plan layouts. The system described below automatically generates hundreds of design options from inputs typically provided by an architect, including a site outline and program document with desired spaces, areas, quantities, and adjacencies to be satisfied. We envision that this workflow can clarify project goals early in the design process, save time, enable better resource allocation, and assist key stakeholders to make informed decisions and deliver better designs. Further, the system is tested on a case study healthcare design project with set goals and objectives.
keywords	healthcare spaces, facility layout design, design optimization, decision making, binary data tree structure, generative design, automated space plans
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	caadria2016_767
id	caadria2016_767
authors	De Azambuja Varela, Pedro and Timothy Merritt
year	2016
title	CorkVault Aarhus: exploring stereotomic design space of cork and 5-axis CNC waterjet cutting
doi	https://doi.org/10.52842/conf.caadria.2016.767
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 767-776
summary	This paper presents the design, fabrication, and construc- tion of CorkVault Aarhus, which was designed using parametric and physics simulation software and realized from ECA cork sheets cut using a CNC waterjet cutter. We recount the lessons learned through the intensive two-week workshop that explored the limits of the mate- rials and tools through prototypes and culminated with the assembly of the final free-form vault structure. Various vaults and arch proto- types provided pedagogical and research value, building up knowledge essential to the final structure built, a human scale pavilion designed and built in three days and made of a thin shell of cork pan- els working only in compression. Three driving concepts were crucial to the experience: stereotomy as a supporting theory, expanded cork agglomerate (ECA) as the main material and water jet cutting as the principal means of fabrication. The complex vault shape called for precise 5-axis cuts supporting a new paradigm in building stereotomic components for architecture.
keywords	Stereotomy; generative algorithm; digital fabrication; waterjet; cork
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2016_007
id	ecaade2016_007
authors	ElGhazi, Yomna Saad and Mahmoud, Ayman Hassaan Ahmed
year	2016
title	Origami Explorations - A Generative Parametric Technique For kinetic cellular façade to optimize Daylight Performance
doi	https://doi.org/10.52842/conf.ecaade.2016.2.399
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 399-408
summary	At present the kinetics is basic, but there is no doubt that research into the field of responsive building facades will continue, to find more sophisticated design and technical solutions. This research explores the possibilities of kinetic composition afforded by Origami different techniques using squared module. Origami and paper pleating techniques are one of the conceptual design approaches from which Kinetics can be developed. The paper examines the possibilities of different arrangements of folded modules to create environmental efficient kinetic morphed skins. The paper aims to achieve different Kinetic origami-based shading screens categorized by series of parameters to provide appropriate daylighting. The main tested parameters are the form of Origami folds, the module size and motion scenarios. Ten origami cases where explored first using conceptual folded paper maquette modules, then parametrically modelled and simulated at four times of the year, 21st of March, June, September and December, taken every hour of the working day.
wos	WOS:000402064400039
keywords	Kinetic cellular façade; Origami; Parametric modelling; Parametric simulations; Daylighting performance.
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: