Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 578

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
wos	WOS:000402063700058
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_224
id	ecaade2016_224
authors	Gerber, David and Pantazis, Evangelos
year	2016
title	Design Exploring Complexity in Architectural Shells - Interactive form finding of reciprocal frames through a multi-agent system
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 455-464
doi	https://doi.org/10.52842/conf.ecaade.2016.1.455
wos	WOS:000402063700050
summary	This paper presents an integrated workflow for interactive design of shell structures, which couples structural and environmental analysis through a multi-agent systems (MAS) for design. The work lies at the intersection of architecture, engineering and computer science research, incorporating generative design with analytical techniques. A brief review on architectural shell structures and the structural logic of reciprocal frames is described. Through the morphological study of reciprocal frames locally we seek to inform the behavior of a MAS, which integrates form-finding techniques, with daylight factor analysis (DFA) and finite element analysis (FEA) on a global configuration. An experimental design is developed in order to explore the solution space of large span free form shells with varying topologies and boundary conditions, as well as identify the relationships between local design parameters of the reciprocal frames (i.e. number of elements, profile) and the analyses (i.e. stress distribution, solar radiation) for enabling the generation of different global design alternatives. The research improves upon design decision-making latency and certainty through harnessing geometric complexity and structural form finding for early stage design. Additionally, the research improves upon design outcomes by establishing a feedback loop between design generation, analysis and performance.
keywords	Generative design; computational design; multi-agent systems; shell structures; reciprocal frames; form finding; parametric design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2016_026
id	ecaade2016_026
authors	Agkathidis, Asterios
year	2016
title	Implementing Biomorphic Design - Design Methods in Undergraduate Architectural Education
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 291-298
doi	https://doi.org/10.52842/conf.ecaade.2016.1.291
wos	WOS:000402063700033
summary	In continuation to Generative Design Methods, this paper investigates the implementation of Biomorphic Design, supported by computational techniques in undergraduate, architectural studio education. After reviewing the main definitions of biomorphism, organicism and biomimicry synoptically, we will assess the application of a modified biomorphic method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of design outputs, student performance as well as moderators and external examiners reports initiate a constructive debate about accomplishments and failures of a design methodology which still remains alien to many undergraduate curricula.
keywords	CAAD Education; Strategies, Shape Form and Geometry; Generative Design; Design Concepts
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_ws-folding
id	ecaade2016_ws-folding
authors	Akleman, Ergun, Kalantar, Negar and Borhani, Alireza
year	2016
title	Folding The Unfoldable - A Method For Constructing Complex-Curved Geometry With Quad Edge Panels
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 69-72
doi	https://doi.org/10.52842/conf.ecaade.2016.1.069
wos	WOS:000402063700007
summary	This paper explains a method will be used during a workshop for constructing complex-curved geometry with quad edge panels. In this workshop, we demonstrate that quad-edge mesh data structure can efficiently be used to construct complex large shapes. With hands-on experiments, we will show a vast variety of shapes can be constructed using square, rectangular, parallelogram and extruded-line shaped panels. In addition, using a system we have recently developed to unfold polygonal mesh, we will demonstrate how desired shapes can be constructed by using laser-cut quadrilateral panels. This approach is particularly suitable to construct complicated sculptural and architectural shapes from anisotropic materials that can only be bended in one direction.
keywords	Shape Modeling; Physical Construction; Complex-Curved Geometry; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_003
id	ascaad2016_003
authors	Al-Jokhadar, Amer; Wassim Jabi
year	2016
title	Humanising the Computational Design Process - Integrating Parametric Models with Qualitative Dimensions
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 9-18
summary	Parametric design is a computational-based approach used for understanding the logic and the language embedded in the design process algorithmically and mathematically. Currently, the main focus of computational models, such as shape grammar and space syntax, is primarily limited to formal and spatial requirements of the design problem. Yet, qualitative factors, such as social, cultural and contextual aspects, are also important dimensions in solving architectural design problems. In this paper, an overview of the advantages and implications of the current methods is presented. It also puts forward a ‘structured analytical system’ that combines the formal and geometric properties of the design, with descriptions that reflect the spatial, social and environmental patterns. This syntactic-discursive model is applied for encoding vernacular courtyard houses in the hot-arid regions of the Middle East and North Africa, and utilising the potentials of these cases in reflecting the lifestyle and the cultural values of the society, such as privacy, human-spatial behaviour, the social life inside the house, the hierarchy of spaces, the segregation and seclusion of family members from visitors and the orientation of spaces. The output of this analytical phase prepares the groundwork for the development of socio-spatial grammar for contemporary tall residential buildings that gives the designer the ability to reveal logical spatial topologies based on socio-environmental restrictions, and to produce alternatives that have an identity while also respecting the context, place and needs of users.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	ascaad2021_151
id	ascaad2021_151
authors	Allam, Samar; Soha El Gohary, Maha El Gohary
year	2021
title	Surface Shape Grammar Morphology to Optimize Daylighting in Mixed-Use Building Skin
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 479-492
summary	Building Performance simulation is escalating towards design optimization worldwide utilizing computational and advanced tools. Egypt has its plan and agenda to adopt new technologies to mitigate energy consumption through various sectors. Energy consumption includes electricity, crude oil, it encompasses renewable and non-renewable energy consumption. Egypt Electricity (EE) consumption by sector percentages is residential (47%), industrial (25%) and commercial (12%), with the remainder used by government, agriculture, public lighting and public utilities (4%). Electricity building consumption has many divisions includes HVAC systems, lighting, Computers and Electronics and others. Lighting share of electricity consumption can vary from 11 to 15 percent in mixed buildings as in our case study which definitely less that the amount used for HVAC loads. This research aims at utilizing shape morphogenesis on facades using geometric shape grammar to enhance daylighting while blocking longwave radiations causing heat stress. Mixed-use building operates in daytime more than night which emphasizes the objective of this study. Results evaluation is referenced to LEED v4.1 and ASHRAE 90.1-2016 window-to-wall ratio calibration and massive wall description. Geometric morphogenesis relies on three main parameters; Pattern (Geometry Shape Grammar: R1, R2, and R3), a reference surface to map from, and a target surface to map to which is the south-western façade of the case study. Enhancing Geo-morph rule is to guarantee flexibility due to the rotation of sun path annually with different azimuth and altitude angles and follow LEED V4.1 enhancements of opaque wall percent for building envelope.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	acadia16_54
id	acadia16_54
authors	Andreen, David; Jenning, Petra; Napp, Nils; Petersen, Kirstin
year	2016
title	Emergent Structures Assembled by Large Swarms of Simple Robots
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 54-61
doi	https://doi.org/10.52842/conf.acadia.2016.054
summary	Traditional architecture relies on construction processes that require careful planning and strictly defined outcomes at every stage; yet in nature, millions of relatively simple social insects collectively build large complex nests without any global coordination or blueprint. Here, we present a testbed designed to explore how emergent structures can be assembled using swarms of active robots manipulating passive building blocks in two dimensions. The robot swarm is based on the toy “bristlebot”; a simple vibrating motor mounted on top of bristles to propel the body forward. Since shape largely determines the details of physical interactions, the robot behavior is altered by carefully designing its geometry instead of uploading a digital program. Through this mechanical programming, we plan to investigate how to tune emergent structural properties such as the size and temporal stability of assemblies. Alongside a physical testbed with 200 robots, this work involves comprehensive simulation and analysis tools. This simple, reliable platform will help provide better insight on how to coordinate large swarms of robots to construct functional structures.
keywords	emergent structures, mechanical intelligence, swarm robotics
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2016_077
id	ecaade2016_077
authors	Aºut, Serdar and Meijer, Winfried
year	2016
title	FlexiMold: Teaching Numeric Control through a Hybrid Device
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 321-328
doi	https://doi.org/10.52842/conf.ecaade.2016.1.321
wos	WOS:000402063700036
summary	This proceeding presents the process and outputs of a collaborative workshop which was held between Yaºar University in Turkey and Delft University of Technology in the Netherlands. The aim of the workshop was to observe the educational potentials of a custom-made formwork device towards teaching CAD/CAM to architecture students. This flexible formwork, which we call FlexiMold, is a hybrid device that is used manually by following computerized numeric information. The students designed an architectural object which has a complex shape and used this formwork to fabricate it in actual scale. We present the workshop objectives, process and outcomes in this proceeding.
keywords	CAAD Education; Human-Numeric Control; Flexible Formwork; Double-Curved Surfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_ws-intelligent
id	ecaade2016_ws-intelligent
authors	Baquero, Pablo, Montas, Nelson and Giannopoulou, Effimia
year	2016
title	Transformational Intelligent Systems - Parametric Simulation Workshop
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 73-76
doi	https://doi.org/10.52842/conf.ecaade.2016.1.073
wos	WOS:000402063700008
summary	This workshop intends to propose a specific kinetic design application, to define an architectural component and to simulate Shape Memory Alloy material behavior. The objective of the workshop is to simulate the experiment before the fabrication, itself aimed to model and anticipate the application's physical behavior traits as a means to preview assembly.
keywords	digital simulation; muscle wires; programmable matter; responsive components; kinetic architectural systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia18_404
id	acadia18_404
authors	Clifford, Brandon; McGee, Wes
year	2018
title	Cyclopean Cannibalism. A method for recycling rubble
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413
doi	https://doi.org/10.52842/conf.acadia.2018.404
summary	Each year, the United States discards 375 million tons of concrete construction debris to landfills (U.S. EPA 2016), but this is a new paradigm. Past civilizations cannibalized their constructions to produce new architectures (Hopkins 2005). This paper interrogates one cannibalistic methodology from the past known as cyclopean masonry in order to translate this valuable method into a contemporary digital procedure. The work contextualizes the techniques of this method and situates them into procedural recipes which can be applied in contemporary construction. A full-scale prototype is produced utilizing the described method; demolition debris is gathered, scanned, and processed through an algorithmic workflow. Each rubble unit is then minimally carved by a robotic arm and set to compose a new architecture from discarded rubble debris. The prototype merges ancient construction thinking with digital design and fabrication methodologies. It poses material cannibalism as a means of combating excessive construction waste generation.
keywords	full paper, cyclopean, algorithmic, robotic fabrication, stone, shape grammars, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	sigradi2016_805
id	sigradi2016_805
authors	Cormack, Jordan; Sweet, Kevin S.
year	2016
title	Parametrically Fabricated Joints: Creating a Digital Workflow
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.412-417
summary	Timber joinery for furniture and architectural purpose has always been identified as a skill or craft. The craft is the demonstration of hand machined skill and precision which is passed down or developed through the iteration of creation and refined reflection. Using digital fabrication techniques provides new, typically unexplored ways of creating and designing joints. It is as if these limitations which bind the ratio of complexity and use are stretched. This means that these joints, from a technical standpoint, can be more advanced than historically hand-made joints as digital machines are not bound by the limitations of the human. The research investigated in this paper explores the ability to create sets of joints in a parametric environment that will be produced with CNC machines, thus redefining the idea of the joint through contemporary tools of creation and fabrication. The research also aims to provide a seamless, digital workflow from the flexible, parametric creation of the joint to the final physical fabrication of it. Traditional joints, more simple in shape and assembly, were first digitally created to ease the educational challenges of learning a computational workflow that entailed the creation and fabrication of geometrically programmed joints. Following the programming and manufacturing of these traditional joints, more advanced and complex joints were created as the understanding of the capabilities of the software and CNC machines developed. The more complex and varied joints were taken from a CAD virtual environment and tested on a 3-axis CNC machine and 3D printer. The transformation from the virtual environment to the physical highlighted areas that required further research and testing. The programmed joint was then refined using the feedback from the digital to physical process creating a more robust joint that was informed by reality.
keywords	Joinery; digital fabrication; parametric; scripting; machining
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_585
id	sigradi2016_585
authors	Cruz, Luciana Eller; Maynardes, Ana Claudia
year	2016
title	Tipografia tátil [Tactile typography]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.360-365
summary	This paper reports an academic experimental research conducted at the University of Brasilia. The goal of this study is to develop a product that allows to mitigate the restricted access to visual content such as the study of typography for vision impaired people. Plaques were constructed with input letters in different typefaces making a two-dimensional shape into a three-dimensional object that can be perceived haptically. The modules were presented to visually impaired people who identified the specific characteristics presented.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_767
id	caadria2016_767
authors	De Azambuja Varela, Pedro and Timothy Merritt
year	2016
title	CorkVault Aarhus: exploring stereotomic design space of cork and 5-axis CNC waterjet cutting
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 767-776
doi	https://doi.org/10.52842/conf.caadria.2016.767
summary	This paper presents the design, fabrication, and construc- tion of CorkVault Aarhus, which was designed using parametric and physics simulation software and realized from ECA cork sheets cut using a CNC waterjet cutter. We recount the lessons learned through the intensive two-week workshop that explored the limits of the mate- rials and tools through prototypes and culminated with the assembly of the final free-form vault structure. Various vaults and arch proto- types provided pedagogical and research value, building up knowledge essential to the final structure built, a human scale pavilion designed and built in three days and made of a thin shell of cork pan- els working only in compression. Three driving concepts were crucial to the experience: stereotomy as a supporting theory, expanded cork agglomerate (ECA) as the main material and water jet cutting as the principal means of fabrication. The complex vault shape called for precise 5-axis cuts supporting a new paradigm in building stereotomic components for architecture.
keywords	Stereotomy; generative algorithm; digital fabrication; waterjet; cork
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2016_024
id	ascaad2016_024
authors	El Sayary, Samer
year	2016
title	Using Time As a Sustainable Tool to Control Daylight in Space - Creating the Chronoform
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 217-226
summary	Just as Einstein's own Relativity Theory led Einstein to reject time, Feynman’s Sum over histories theory led him to describe time simply as a direction in space. Many artists tried to visualize time as Étienne-Jules Marey when he invented the chronophotography. While the wheel of development of chronophotography in the Victorian era had ended in inventing the motion picture, a lot of research is still in its earlier stages regarding the time as a shaping media for the architectural form. Using computer animation now enables us to use time as a flexible tool to be stretched and contracted to visualize the time dilation of the Einstein's special relativity. The presented work suggests using time as a sustainable tool to shape the generated form in response to the sun movement to control the amount of daylighting entering the space by stretching the time duration and contracting time frames at certain locations of the sun trajectory along a summer day to control the amount of daylighting in the morning and afternoon versus the noon time.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	acadia16_352
id	acadia16_352
authors	Farahi, Behnaz
year	2016
title	Caress of the Gaze: A Gaze Actuated 3D Printed Body Architecture
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 352-361
doi	https://doi.org/10.52842/conf.acadia.2016.352
summary	This paper describes the design process behind Caress of the Gaze, a project that represents a new approach to the design of a gaze-actuated, 3D printed body architecture—as a form of proto-architectural study—providing a framework for an interactive dynamic design. The design process engages with three main issues. Firstly, it aims to look at form or geometry as a means of controlling material behavior by exploring the tectonic properties of multi-material 3D printing technologies. Secondly, it addresses novel actuation systems by using Shape Memory Alloy (SMA) in order to achieve life-like behavior. Thirdly, it explores the possibility of engaging with interactive systems by investigating how our clothing could interact with other people as a primary interface, using vision-based eye-gaze tracking technologies. In so doing, this paper describes a radically alternative approach not only to the production of garments but also to the ways we interact with the world around us. Therefore, the paper addresses the emerging field of shape-changing 3D printed structures and interactive systems that bridge the worlds of robotics, architecture, technology, and design.
keywords	eye-gaze tracking, interactive design, 3d printing, smart material, programmable matter, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	acadia16_478
id	acadia16_478
authors	Franzke, Luke; Rossi, Dino; Franinovic, Karmen
year	2016
title	Fluid Morphologies: Hydroactive Polymers for Responsive Architecture
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 478-487
doi	https://doi.org/10.52842/conf.acadia.2016.478
summary	This paper describes Hydroactive Polymers (HAPs), a novel way of combining shape-changing Electroactive Polymers (EAPs) and water for potential design and architectural explorations. We present a number of experiments together with the Fluid Morphologies installation, which demonstrated the materials through an interactive and sensory experience. We frame our research within the context of both material science and design/architecture projects that engage the unique material properties of EAPs. A detailed description of the design and fabrication process is given, followed by a discussion of material limitations and potential for improving robustness and production. We demonstrate fluid manipulation of light and shadow that would be impossible to achieve with traditional electromechanical actuators. Through the development of this new actuator, we have attempted to advance the accessibility of programmable materials for designers and architects to conduct hands-on experiments and prototypes. We thus conclude that the HAP modules hold a previously unexplored yet promising potential for a new kind of shape-changing, liquid-based architecture
keywords	active materials, electroactive polymers, programmable materials, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia23_v1_34
id	acadia23_v1_34
authors	Gascon Alvarez, Eduardo; Curth, Alexander (Sandy); Feickert, Kiley; Martinez Schulte, Dinorah; Mueller, Caitlin; Ismail, Mohamed
year	2023
title	Algorithmic Design for Low-Carbon, Low-Cost Housing Construction in Mexico
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 34-38.
summary	Mexico is one of the most urbanized countries in the Global South, and simultaneously faces a rapidly increasing population and a deluge of inadequate housing (URBANET 2019). In 2016, it was estimated that 40 percent of all private residences in Mexico were considered inadequate by UN-Habitat (UN-Habitat 2018). As informal housing constitutes over half of all Mexican housing construction, the most vulnerable groups of the population are particularly impacted. Therefore, there is a serious need to innovate in the area of low-cost building construction for housing in Mexico. This research explores how shape-optimized concrete and earth construction could help provide adequate housing without jeopardizing the country’s commitment to sustainability.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ascaad2016_050
id	ascaad2016_050
authors	Gharbi, Asma; Ferdaws Belcadhi and Abdelkader Ben Saci
year	2016
title	Morphological Taxonomy As a Methodological Tool of Form Manipulation
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 493-502
summary	The paper presents taxonomy as a methodological tool which serves to better understand the architectural morphose (act of giving shape), and its contribution to form manipulation, produced through a morpho-digital combination. The interest is to exploit digital processes to decipher an underlying architectural grammar. It is thus a matter of releasing the morphological knowledge in conformations (observed forms’ system). This orientation stipulates that the produced shape results from a system of morphose which we can formalize and understand by the identification of the structural attributes and the organizational logic, as well as the inherent morphological laws of generation. We stipulate that the interest of our morpho-digital method is the characterization and the development of a constructive morphological model governed by internal relations. Thus, a collection of dwelling buildings is characterized by both the morphology decomposition and the morphometric study. Based on the questions about the form produced, the method promotes a creative situation in the field of architectural design.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2016_512
id	sigradi2016_512
authors	Griz, Cristiana; Mendes, Letícia; Amorim, Luiz; Holanda, Maria Augusta; Carvalho, Thais
year	2016
title	O meu modo de morar: uma gramática para reformar projetos de apartamentos [My way of living: a grammar to reform apartment projects]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.727-733
summary	This paper presents part of the results of an investigation which main goal is to propose strategies to guide the design of high standards apartment projects, in order to facilitate the implementation of reforms. The starting point came from a research which measured how projects proposed by the real estate market (Original Projects - OPs) were customized, resulting in Reformed Projects (RPs). This step is dedicated to the development of the Reform Grammar (GR), which, although it purports to guide future reforms, goals to identify reform patterns most used in the customization process.
keywords	Shape grammar; Apartment projects; Ways of living
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: