Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ascaad2016_014
id	ascaad2016_014
authors	Ahmed, Zeeshan Y.; Freek P. Bos, Rob J.M. Wolfs and Theo A.M. Salet
year	2016
title	Design Considerations Due to Scale Effects in 3D Concrete Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 115-124
summary	The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can’t be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more – all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	caadria2016_767
id	caadria2016_767
authors	De Azambuja Varela, Pedro and Timothy Merritt
year	2016
title	CorkVault Aarhus: exploring stereotomic design space of cork and 5-axis CNC waterjet cutting
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 767-776
doi	https://doi.org/10.52842/conf.caadria.2016.767
summary	This paper presents the design, fabrication, and construc- tion of CorkVault Aarhus, which was designed using parametric and physics simulation software and realized from ECA cork sheets cut using a CNC waterjet cutter. We recount the lessons learned through the intensive two-week workshop that explored the limits of the mate- rials and tools through prototypes and culminated with the assembly of the final free-form vault structure. Various vaults and arch proto- types provided pedagogical and research value, building up knowledge essential to the final structure built, a human scale pavilion designed and built in three days and made of a thin shell of cork pan- els working only in compression. Three driving concepts were crucial to the experience: stereotomy as a supporting theory, expanded cork agglomerate (ECA) as the main material and water jet cutting as the principal means of fabrication. The complex vault shape called for precise 5-axis cuts supporting a new paradigm in building stereotomic components for architecture.
keywords	Stereotomy; generative algorithm; digital fabrication; waterjet; cork
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia16_130
id	acadia16_130
authors	Koschitz, Duks; Ramagosa, Bernat; Rosenbaum, Eric
year	2016
title	Beetle Blocks: A New Visual Language for Designers and Makers
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 130-139
doi	https://doi.org/10.52842/conf.acadia.2016.130
summary	We are introducing a new teaching tool to show designers, architects, and artists procedural ways of constructing objects and space. Computational algorithms have been used in design for quite some time, but not all tools are very accessible to novice programmers, especially undergraduate students. ‘Beetle Blocks’ (beetleblocks.com) is a software environment that combines an easy-to-use graphical programming language with a generative model for 3D space, drawing on ‘turtle geometry,’ a geometry paradigm introduced by Abelson and Disessa, that uses a relative as opposed to an absolute coordinate system. With Beetle Blocks, designers are able to learn computational concepts and use them for their designs with more ease, as individual computational steps are made visually explicit. The beetle, the relative coordinate system, follows instructions as it moves about in 3D space. Anecdotal evidence from studio teaching in undergraduate programs shows that despite the early introduction of digital media and tools, architecture students still struggle with learning formal languages today. Beetle Blocks can significantly simplify the teaching of complex geometric ideas and we explain how this can be achieved via several examples. The blocks-based programming language can also be used to teach fundamental concepts of manufacturing and digital fabrication and we elucidate in this paper which possibilities are conducive for 2D and 3D designs. This project was previously implemented in other languages such as Flash, Processing and Scratch, but is now developed on top of Berkeley’s ‘Snap!’
keywords	generative design, design pedagogy, digital fabrication, tool-building, pedagogical tools
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	lasg_whitepapers_2016_216
id	lasg_whitepapers_2016_216
authors	Eric Mathis & Tyler Jenkins
year	2016
title	Infrastructure Space and Platforms as Living Architectures: The Importance of Regenerative Design and Innovation for Bioregional Economic Development
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada pp. 216 - 229
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
email
last changed	2019/07/29 14:00

_id	ecaade2016_096
id	ecaade2016_096
authors	Chen, Nai Chun, Nagakura, Takehiko and Larson, Kent
year	2016
title	Social Media as Complementary Tool to Evaluate Cities - Data Mining Innovation Districts in Boston
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 447-456
doi	https://doi.org/10.52842/conf.ecaade.2016.2.447
wos	WOS:000402064400044
summary	High tech industries are playing an important role in the economic development in the United States. While some cities are shrinking, the "innovation" cities are growing. The attributes that cause some cities to successfully become innovative is a very relevant 21st century topic and will be investigated here.Previous work conduct city analysis through conventional government GIS or census data but such analyses do not answer questions about the perception of citizens inhabiting the city, and the activities they conduct. The novelty of this current project is to make use of large-scale bottom-up data available from social media. Several social media sources-CrunchBase, Twitter, Yelp, and Flickr- were data mined pertaining to four innovation districts in Boston. We found that the success of innovation districts in Boston were correlated with several important variables: the most successful districts tended to occur near research institutions, in very "mixed use" areas, and were unexpectedly not correlated with land and labor prices, unlike technology districts in the past. Based on our study, we make recommendations for the urban design that cities should put in place to increase the potential for "innovation".
keywords	Smart Cities; Social Media; Innovation District; Spatial Analysis; Data Mining; Natural Language Processing
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2016_024
id	ascaad2016_024
authors	El Sayary, Samer
year	2016
title	Using Time As a Sustainable Tool to Control Daylight in Space - Creating the Chronoform
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 217-226
summary	Just as Einstein's own Relativity Theory led Einstein to reject time, Feynman’s Sum over histories theory led him to describe time simply as a direction in space. Many artists tried to visualize time as Étienne-Jules Marey when he invented the chronophotography. While the wheel of development of chronophotography in the Victorian era had ended in inventing the motion picture, a lot of research is still in its earlier stages regarding the time as a shaping media for the architectural form. Using computer animation now enables us to use time as a flexible tool to be stretched and contracted to visualize the time dilation of the Einstein's special relativity. The presented work suggests using time as a sustainable tool to shape the generated form in response to the sun movement to control the amount of daylighting entering the space by stretching the time duration and contracting time frames at certain locations of the sun trajectory along a summer day to control the amount of daylighting in the morning and afternoon versus the noon time.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ascaad2016_059
id	ascaad2016_059
authors	Admed, Mohammad H.K.
year	2016
title	Towards Developing BIM Curriculum in Higher Education in Egypt
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 589-598
summary	The paper surveys and discusses the current state of teaching BIM in departments of architecture in Egypt. It also connects it to the increasing professional market demand for technologically qualified architects. In specific, the paper explores the reasons behind the fact that the local BIM curriculum is lagging behind its international counterpart. It also explores the need to utilise BIM software capabilities. A further comparative survey is carried out between local case studies and international cases through identifying several stages of BIM implementation in both teaching and design. The advantages and disadvantages of the current method of teaching are explored in an effort to improve performance of BIM curriculum.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	ascaad2016_043
id	ascaad2016_043
authors	Alacam, Sema; Orkan. Z. Güzelci
year	2016
title	Computational Interpretations of 2D Muqarnas Projections in 3D Form Finding
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 421-430
summary	In the scope of this study, we developed an algorithm to generate new 3D geometry (interpretation) of a given or generated planar projection of a muqarnas in a digital 3D modelling software (Rhinoceros), its visual scripting environment (VSE) Grasshopper and also the Python programming language. Differing from traditional methods, asymmetrical form alternatives are examined. In other words, 2D projections of muqarnas were only used as an initial geometrical pattern for generative form finding explorations. This study can be considered an attempt to explore new relations, rules and vocabulary through algorithmic form finding experiments derived from 2D muqarnas projections.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
doi	https://doi.org/10.52842/conf.caadria.2016.631
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2016_564
id	sigradi2016_564
authors	Alló, Leticia; Pazmino, Ana Veronica
year	2016
title	Design de Contrabaixo Elétrico e Aplicaç?o da Prototipagem 3D [Electric Bass Design and Application of 3D Prototyping]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.986-990
summary	The objective of this study is to show the development of a bass with the application of rapid prototyping and manufacturing process. During the development of the product was used Solid Works software to model instrument, which was subsequently embodied in a 3D printer. The article presents the iterative development that involves: test, analyze and improve the prototypes. As a result the article presents a bass model with some requirements such as innovation, customization, acoustics and ergonomics
keywords	Prototyping; Contrabass; 3D printing.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_008
id	ascaad2016_008
authors	Armstrong, Logan; Guy Gardner and Christina James
year	2016
title	Evolutionary Solar Architecture - Generative Solar Design Through Soft Forms and Rigid Logics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 55-64
summary	This paper describes the development of a workflow for the production of a net zero off-grid research cabin. The workflow deploys a number of affiliated parametric software packages as a form finding tool for the exterior envelope of this structure, with a focus on passive solar design as a generative formal driver. The design was required to incorporate the spatial and programmatic needs of the users in a compact, barrier free, net zero building. Simultaneously, the research question asked the designers to harness the potential of digital design in the consideration of future fabrication techniques, in order to optimize the building’s performance and the speed and quality of assembly once the project moves into construction. Parameters considered include solar exposure, external surface area, cost, fabrication, functionality, and aesthetic criteria. This project was developed by a multidisciplinary team of graduate students at the University of Calgary.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_028
id	ecaade2016_028
authors	Asanowicz, Aleksander
year	2016
title	Digital Architectural Composition - 30 years of experience and experimentation
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 195-203
doi	https://doi.org/10.52842/conf.ecaade.2016.1.195
wos	WOS:000402063700022
summary	In this paper the evolution of architectural composition teaching will be presented and discussed. The main point of these deliberations is to consider how digital methods and technologies have influenced the teaching methods and the understanding of compositional rules/principles by students. Another important factor which will be analysed, is the difficulties faced by teachers in the evaluation of students' work. The paper is divided into four parts, each of which concerns different approaches to architectural composition teaching. In the first part the historical background of architectural composition teaching is presented. In the second part traditional teaching methods is described, the third concerns teaching of digital architectural composition, and the fourth - digital architectural composition in virtual space. At the end of each section, the advantages and disadvantages of the discussed methods are presented. These disadvantages were a stimulus for changes in the teaching process, which was enabled thanks to the development of digital technologies (software and hardware) during the last 20 years. The last part of the paper will be devoted to the presentation of potential directions of development of architectural composition teaching methods.Please write your abstract here by clicking this paragraph.
keywords	Architectural Composition; digital modelling; Virtual Reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2016_013
id	caadria2016_013
authors	Aschwanden, Gideon D.P.A.
year	2016
title	Neighbourhood detection with analytical tools
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2016.013
summary	The increasing population size of cities makes the urban fabric ever more complex and more disintegrated into smaller areas, called neighbourhoods. This project applies methods from geoscience and software engineering to the process of identification of those neighbourhoods. Neighbourhoods, by nature, are defined by connec- tivity, centrality and similarity. Transport and geospatial datasets are used to detect the characteristics of places. An unsupervised learning algorithm is then applied to sort places according to their characteris- tics and detect areas with similar make up: the neighbourhood. The at- tributes can be static like land use or space syntax attributes as well as dynamic like transportation patterns over the course of a day. An un- supervised learning algorithm called Self Organizing Map is applied to project this high dimensional space constituting of places and their attributes to a two dimensional space where proximity is similarity and patterns can be detected – the neighbourhoods. To summarize, the proposed approach yields interesting insights into the structure of the urban fabric generated by human movement, interactions and the built environment. The approach represents a quantitative approach to ur- ban analysis. It reveals that the city is not a polychotomy of neigh- bourhoods but that neighbourhoods overlap and don’t have a sharp edge.
keywords	Data analytics; urban; learning algorithms; neighbourhood delineation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2016_383
id	caadria2016_383
authors	Beorkrem, C.; J. Ellinger, P. Bernstein and A. Hauck
year	2016
title	Multivariate Schematic Design Tooling
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 383-394
doi	https://doi.org/10.52842/conf.caadria.2016.383
summary	This paper will examine the results from a research collaboration between (BIM Software Manufacturer) and (School), whose problem statement focused on supporting robust interoperability by defining goals focused on multivariate conceptual design tools. The collaboration included design faculty, students and software professionals, the latter providing access to a broad range of design simulation tools either commercially available or currently in development. The tools were developed first through case studies and background research, followed by the design and implementation of novel computational methods advancing the architectural design workflow by seeking to create comparative tools which allow a designer to connect multiple data typologies in a single model. With advanced computational tools employed both as standalone resources and embedded in parametric loops, we sought to provide immediate feedback on design goals.
keywords	Building information modelling; simulation and prediction; education; optimization; scripting
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2016_712
id	sigradi2016_712
authors	Braida, Frederico; Castro, Janaina Mendes de; Pires, Letícia Bedendo Campanha; Pereira, Luiz Antônio Rozendo; Cardoso, Marcela Martins Cavalari
year	2016
title	Projetando com Blocos de Montar Digitais: Possibilidades e Limitaç?es do Jogo LEGO Digital Designer [Designing with Digital Building Blocks: Possibilities and Limitations of the LEGO Digital Designer Game]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.244-251
summary	This article proposes a reflection on the possibilities of using building blocks games as educational tool applied to the universe of Architecture and Urbanism design, from literature search and empirical data gathered in a workshop coordinated by the Research Group of Languages and Expressions in Architecture, Urbanism and Design – LEAUD (Brasil). The goal is to highlight the possibilities and limitations of using projetual world of building blocks as an academic material for Architecture and Urbanism, especially after the experience with LEGO Digital Designer software.
keywords	Design methodology; Building blocks; LEGO; Digital game; Design worlds
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_118
id	ecaade2016_118
authors	Cannaerts, Corneel
year	2016
title	Coding as Creative Practice
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 397-404
doi	https://doi.org/10.52842/conf.ecaade.2016.1.397
wos	WOS:000402063700044
summary	This paper looks into coding as a creative practice within architecture, more specifically into textual and graphical coding as a practitioner during the design process. It argues that coding is not a mere tool for designing but a particular design medium, with its own affordances and resistances. Using code as a design medium provides a specific form of feedback, it influences the design process and its outcomes. Code is a technological and conceptual support for design thinking. In other words, code and coding can be ascribed agency in architectural design. This research is based on a number of cases from design practice and teaching, ranging from small design experiments, developing software tools for specific design projects and teaching workshops. The cases are grouped into three metaphors, each describing a particular aspect of coding as a design medium.
keywords	coding; sketching; tooling; structuring
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_805
id	sigradi2016_805
authors	Cormack, Jordan; Sweet, Kevin S.
year	2016
title	Parametrically Fabricated Joints: Creating a Digital Workflow
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.412-417
summary	Timber joinery for furniture and architectural purpose has always been identified as a skill or craft. The craft is the demonstration of hand machined skill and precision which is passed down or developed through the iteration of creation and refined reflection. Using digital fabrication techniques provides new, typically unexplored ways of creating and designing joints. It is as if these limitations which bind the ratio of complexity and use are stretched. This means that these joints, from a technical standpoint, can be more advanced than historically hand-made joints as digital machines are not bound by the limitations of the human. The research investigated in this paper explores the ability to create sets of joints in a parametric environment that will be produced with CNC machines, thus redefining the idea of the joint through contemporary tools of creation and fabrication. The research also aims to provide a seamless, digital workflow from the flexible, parametric creation of the joint to the final physical fabrication of it. Traditional joints, more simple in shape and assembly, were first digitally created to ease the educational challenges of learning a computational workflow that entailed the creation and fabrication of geometrically programmed joints. Following the programming and manufacturing of these traditional joints, more advanced and complex joints were created as the understanding of the capabilities of the software and CNC machines developed. The more complex and varied joints were taken from a CAD virtual environment and tested on a 3-axis CNC machine and 3D printer. The transformation from the virtual environment to the physical highlighted areas that required further research and testing. The programmed joint was then refined using the feedback from the digital to physical process creating a more robust joint that was informed by reality.
keywords	Joinery; digital fabrication; parametric; scripting; machining
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_561
id	ecaadesigradi2019_561
authors	Cress, Kevan and Beesley, Philip
year	2019
title	Architectural Design in Open-Source Software - Developing MeasureIt-ARCH, an Open Source tool to create Dimensioned and Annotated Architectural drawings within the Blender 3D creation suite.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 621-630
doi	https://doi.org/10.52842/conf.ecaade.2019.1.621
summary	MeasureIt-ARCH is A GNU GPL licensed, dimension, annotation, and drawing tool for use in the open source software Blender. By providing free and open tools for the reading and editing of architectural drawings, MeasurIt-ARCH allows works of architecture to be shared, read, and modified by anyone. The digitization of architectural practice over the last 3 decades has brought with it a new set of inter-disciplinary discourses for the profession. An attempt to utilise 'Open-Source' methodologies, co-opted from the world of software development, in order to make high quality design more affordable, participatory and responsible has emerged. The most prominent of these discussions are embodied in Carlo Raitti and Mathew Claudel's manifesto 'Open-Source Architecture' (Ratti 2015) and affordable housing initiatives like the Wikihouse project (Parvin 2016). MeasurIt-ARCH aims to be the first step towards creating a completely Open-Source design pipeline, by augmenting Blender to a level where it can be used produce small scale architectural works without the need for any proprietary software, serving as an exploratory critique on the user experience and implementations of industry standard dimensioning tools that exist on the market today.
keywords	Blender; Open-Source; Computer Aided Design ; OSArc
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

For more results click below: