Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_362
id	acadia16_362
authors	Beesley, Philip; Ilgun, Zeliha, Asya; Bouron, Giselle; Kadish, David; Prosser, Jordan; Gorbet, Rob; Kulic, Dana; Nicholas, Paul; Zwierzycki, Mateusz
year	2016
title	Hybrid Sentient Canopy: An implementation and visualization of proprioreceptive curiosity-based machine learning
doi	https://doi.org/10.52842/conf.acadia.2016.362
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 362-371
summary	This paper describes the development of a sentient canopy that interacts with human visitors by using its own internal motivation. Modular curiosity-based machine learning behaviour is supported by a highly distributed system of microprocessor hardware integrated within interlinked cellular arrays of sound, light, kinetic actuators and proprioreceptive sensors in a resilient physical scaffolding system. The curiosity-based system involves exploration by employing an expert system composed of archives of information from preceding behaviours, calculating potential behaviours together with locations and applications, executing behaviour and comparing result to prediction. Prototype architectural structures entitled Sentient Canopy and Sentient Chamber developed during 2015 and 2016 were developed to support this interactive behaviour, integrating new communications protocols and firmware, and a hybrid proprioreceptive system that configured new electronics with sound, light, and motion sensing capable of internal machine sensing and externally- oriented sensing for human interaction. Proprioreception was implemented by producing custom electronics serving photoresistors, pitch-sensing microphones, and accelerometers for motion and position, coupled to sound, light and motion-based actuators and additional infrared sensors designed for sensing of human gestures. This configuration provided the machine system with the ability to calculate and detect real-time behaviour and to compare this to models of behaviour predicted within scripted routines. Testbeds located at the Living Architecture Systems Group/Philip Beesley Architect Inc. (LASG/PBAI, Waterloo/Toronto), Centre for Information Technology (CITA, Copenhagen) National Academy of Sciences (NAS) in Washington DC are illustrated.
keywords	intedisciplinary/collaborative design, intelligent environments, artificial intelligence, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2016_074
id	ecaade2016_074
authors	Das, Subhajit, Day, Colin, Dewberry, Michael, Toulkeridou, Varvara and Hauck, Anthony
year	2016
title	Automated Service Core Generator in Autodesk Dynamo - Embedded Design Intelligence aiding rapid generation of design options
doi	https://doi.org/10.52842/conf.ecaade.2016.2.217
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 217-226
summary	Building design entails an intuitive and informative exploration of an architect involving iterative refinement of design ideas till client objectives, and priorities are satisfied. Similarly, service cores in a building are designed through the exploration of multifarious design options each with different performative metrics regarding accessibility, efficiency, cost, feasibility, etc. As the current process is labor-intensive, manual & dependent on the expertise of the architect, the search space leading to the selection of an optimal design alternative is very limited. This paper describes Service Core Generator (SCG) library in Autodesk Dynamo enabling automated generation of service core models for varied building shell geometry types (limited to orthogonal profiles). The tool described encodes explicit and implicit domain knowledge into the system facilitating service core models for buildings across varied scale with use type's including offices, hotels or residential buildings.
wos	WOS:000402064400021
keywords	Design Alternatives; Geometry Analysis; Parametric Modelling; Design Tools; Design Automation;
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2016_078
id	ecaade2016_078
authors	Das, Subhajit, Zolfagharian, Samaneh, Nourbakhsh, Mehdi and Haymaker, John
year	2016
title	Integrated Spatial-Structural Optimization in the Conceptual Design Stage of Project - A tool to generate and optimize design solutions aiding informed decision making for Architects, Engineers and Stakeholders
doi	https://doi.org/10.52842/conf.ecaade.2016.2.117
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 117-126
summary	Healthcare design projects require the careful integration of spatial and structural requirements. Today, design teams typically resolve these requirements in two separate, largely sequential steps. In the first step, architects leverage their experience and vision to develop space plans that address program and goals. Next, based on the architect's recommended design, engineers generate and refine a structural design to address structural requirements. This manual process produces a very limited number of non optimal spatial and structural design solutions with unclear decision rationale. This paper presents the Integrated Spatial-Structural Optimization (ISSO) decision making methodology. ISSO supports design teams by helping them generate, analyze, and manage a vast number of integrated spatial and structural solutions. ISSO features a bi-level optimization workflow that has been customized for spatial and structural design of healthcare facilities. The paper describes implementation in the Dynamo parametric modeling platform, and retrospective validation of the algorithm and workflow on an industry case study to demonstrate how ISSO can help design teams generate, analyze, and manage more conceptual design options.
wos	WOS:000402064400011
keywords	Spatial Design; Generative Design; Design Optimization; Facility Planning; Design Tools; Design Automation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia16_106
id	acadia16_106
authors	Das, Subhajit; Day, Colin; Hauck, John; Haymaker, John; Davis, Diana
year	2016
title	Space Plan Generator: Rapid Generationn & Evaluation of Floor Plan Design Options to Inform Decision Making
doi	https://doi.org/10.52842/conf.acadia.2016.106
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 106-115
summary	Design exploration in architectural space planning is often constrained by tight deadlines and a need to apply necessary expertise at the right time. We hypothesize that a system that can computationally generate vast numbers of design options, respect project constraints, and analyze for client goals, can assist the design team and client to make better decisions. This paper explains a research venture built from insights into space planning from senior planners, architects, and experts in the field, coupled with algorithms for evolutionary systems and computational geometry, to develop an automated computational framework that enables rapid generation and analysis of space plan layouts. The system described below automatically generates hundreds of design options from inputs typically provided by an architect, including a site outline and program document with desired spaces, areas, quantities, and adjacencies to be satisfied. We envision that this workflow can clarify project goals early in the design process, save time, enable better resource allocation, and assist key stakeholders to make informed decisions and deliver better designs. Further, the system is tested on a case study healthcare design project with set goals and objectives.
keywords	healthcare spaces, facility layout design, design optimization, decision making, binary data tree structure, generative design, automated space plans
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ecaade2016_033
id	ecaade2016_033
authors	Dokonal, Wolfgang, Knight, Michael and Dengg, Ernst
year	2016
title	VR or Not VR - No Longer a Question?
doi	https://doi.org/10.52842/conf.ecaade.2016.2.573
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 573-579
summary	Virtual Reality (VR) software has developed to the point where, for the architect who is averagely technically adept, it can be incorporated into the design process with reasonable effort and costs. For VR to be an effective design tool, it must add value to the design process and should give insights and opportunities not available by other methods.Previous research by the authors reported on the results of an international student workshop which focused both on the workflow (to prepare the architectural models for the new VR systems) and the spatial perception that users experienced. In this paper, we continue to explore the question: "Can low cost VR be an effective addition to the architects' design toolbox, or does it still remain a "far-fetched, high-tech expensive folly?"To do this we are working with a larger group of students, a more developed workflow and we are also expanding this to architects in practice. We will be assessing both the practicality of integrating VR into the design workflow and the spatial perception of the designer when interacting with the model. We are experimenting with additional interface tools.
wos	WOS:000402064400058
keywords	Virtual Reality; Google Cardboard; Low Cost Interfaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2016_777
id	sigradi2016_777
authors	Dokonal, Wolfgang; Knight, Mike; Dengg, Ernst
year	2016
title	VR or not VR – an eeZee question?
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.831-837
summary	Virtual Reality (VR) software has developed to the point where, for the architect who is averagely technically adept, it can be incorporated into the design process with reasonable effort and costs. For VR to be an effective design tool, it must add value to the design process and should give insights and opportunities not available by other methods. Previous research by the authors reported on the results of an international student workshop, which focused on both the workflow, and the spatial perception that users experienced. In this paper, we continue to explore the question: “Can low cost VR be an effective addition to the architects’ design toolbox, or does it still remain a “far-fetched, high-tech expensive folly?” We will be assessing both the practicality of integrating VR into the design workflow and the spatial perception of the designer when interacting with the model. We are experimenting with additional interface tools for the new low cost Head Mounted Displays.
keywords	Virtual reality; Google Cardboard; Low cost interface; Oculus Rift
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_056
id	ascaad2016_056
authors	Dutt, Florina; Subhajit Das
year	2016
title	Geospatial Tool Evaluating Job Location Mismatch, Based on Available Workforce and Transit Options - Evaluating property location in a city using large-scale datasets
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 557-566
summary	The paper addresses the issue of spatial mismatch of jobs and the accessibility to job locations based on different age, income and industry group. Taking Atlanta as a case study, we developed a geospatial analysis tool enabling developers, the city planning bureau and the residents to identify potential sites of redevelopment with better economic development opportunities. It also aids to find potential location to live with respect to user’s choices for transit options, walkability, job location and proximity to chosen land use. We built our model on a block level in the city, imparting them a score, visualizing the data as a heat map. The metrics to compute the score included proximity to job, proximity to worker’s residence, transit availability, walkability and number of landmark elements near the site. We worked with Longitudinal Employer-Household Dynamics (LEHD) Data along with residence area characteristics (RAC) and work place area characteristic (WAC) data sets, where the total number of data-points was over 3 million. It was challenging for us to optimize computation such that the prototype performs statistical analysis and updates visualization in real time. The research further is prototyped as a web application leveraging Leaflet’s Open Street Maps API and D3 visualization plugin. The research showed that there is a high degree of spatial mismatch between home and job locations with very few jobs with driving distance within 5 -10 miles with limited transit options in Atlanta. Further, it showed that low-earning workers need to travel significantly larger distance for work compared to higher class.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	ascaad2016_007
id	ascaad2016_007
authors	Elsayed, Mohamed; Osama Tolba and Ahmed Elantably
year	2016
title	Architectural Space Planning Using Parametric Modeling - Egyptian National Housing Project
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 45-54
summary	The Egyptian government resorts to prototype housing for low-income citizens to meet the growing demand of the housing market. The problem with the prototype is that it does not meet specific needs. Consequently, users make modifications to the prototype without professional intervention because of the high cost. This paper discusses an automatic multi-stories space planning tool that helps low-income citizens to modify their prototype housing provided by the government. Social, spatial and functional design aspects were set in the original design prototype by an architect. The proposed tool simulates spaces spatial locations in the original design by simulating the analogy of mechanical springs through an interactive simulation of a parametric model. The authors developed the used algorithm in the generative design tool Grasshopper and the live physics engine Kangaroo, both working within the Rhino 3D environment. The algorithm has two versions, one-floor level version and two floors version targeting the wealthier users. Results indicate that this tool integrates with the exploratory nature of the design process even for non-professional users. The authors designed a tool that will help the users to study the effect of the desired modifications against the originally provided prototype, it also makes it easier for users to express their requirements to a professional designer, conserving time and financial cost.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	sigradi2016_530
id	sigradi2016_530
authors	Estévez, Alberto T.; Navarro, Diego
year	2016
title	Del microscopio electrónico a la estrategia digital en arquitectura [From the electron microscope to the digital strategy in architecture]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.734-742
summary	The knowledge of when the amorphous masses of cells organize themselves into a first structural level is relevant for the architect. The architecture must also attend structural and economic stresses, following efficiency, as living beings do: something that we can learn from nature ("biolearning"), although that level can only be reached with microscope. So this becomes a useful tool for architectural research. Examples of this are presented here, seeking first to discover, analyze and evaluate microscopic structures of plants and animals. On that knowledge we can make emerge the digital design of real architectural projects, using computational strategies, also morphogenetic.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_809
id	sigradi2016_809
authors	García Amen, Fernando; Martín Iglesias, Rodrigo; Schieda, Alejandro; Lagomarsino, Federico; Miret, Santiago
year	2016
title	Digital domes that become urban symbionts
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.892-896
summary	Montevideo has a new visitor. In the heritage building of the german architect Karl Trambauer, located in the Old City, a new presence was installed filling the vacuum left by its former collapsed dome, seeking to restore a message, adding a new vision and recovering the lost dialogue between the architecture, the city and its inhabitants. This paper summarizes and explains the experience of the workshop Adaptation 2015, held on September 2015 at the Universidad de la República, Uruguay. Exposing the theoretical framework, design strategies, morphogenetic development, digital manufacturing experimentations, conclusions and open questions from the experience made. We will go through this temporary intervention on Trambauer’s building, being a rare but symbiotic object, with parametric genes, digital and handcrafted manufacture, and also looking for the impact of theory and academic practices in the city.
keywords	Urban intervention – Cities – Heritage – Parametric design – Digital fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_621
id	sigradi2016_621
authors	Gomes, Maria Cecília Rocha Couto; Santos, Ana Paula Baltazar dos; Arruda, Guilherme Ferreira de; Cabral Filho , José dos Santos; Silva, Luís Henrique Marques de Oliveira; Diniz, Luiza Encarnaç?o; Lima, Mariana Julia Souza Barbosa; Stralen, Mateus de Sousa van
year	2016
title	Parametrizaç?o para além do processo de projeto: experimentando aberturas para interaç?o [Parametrization beyond the design process: trying out openness for interaction]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.790-794
summary	This paper discusses the use of parametrization and digital fabrication in architecture proposing a shift from increasing the architect’s control over the final product (determinist paradigm), towards increasing users' interaction. It presents the design process of an experimental interactive object intended to meet the former discussion and test the limits and difficulties that might arise during the process. Such an object was developed by Lagear (UFMG), as a response to the exhibition Homo Faber: Digital Fabrication in Latin America, CAAD FUTURES 2015.
keywords	Interactive object; Parametrization; Digital Fabrication; Representation; Interaction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_72
id	acadia16_72
authors	Harrison, Paul
year	2016
title	What Bricks Want: Machine Learning and Iterative Ruin
doi	https://doi.org/10.52842/conf.acadia.2016.072
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 72-77
summary	Ruin has a bad name. Despite the obvious complications, failure provides a rich opportunity—how better to understand a building’s physicality than to watch it collapse? This paper offers a novel method to exploit failure through physical simulation and iterative machine learning. Using technology traditionally relegated to special effects, we can now understand collapse on a granular level: since modern-day physics engines track object-object collisions, they enable a close reading of the spatial preferences that underpin ruin. In the case of bricks, that preference is relatively simple—to fall. By idealizing bricks as rigid bodies, one can understand the effects of gravitational force on each individual brick in a masonry structure. These structures are sometimes able to ‘settle,’ resulting in a stable equilibrium state; in many cases, it means that they will simply collapse. Analyzing ruin in this way is informative, to be sure, but it proves most useful when applied in series. The evolutionary solver described in this paper closely monitors the performance of constituent bricks and ensures that the most successful structures are emulated by later generations. The tool consists of two parts: a user interface for design and the solver itself. Once the architect produces a potential design, the solver performs an evolutionary optimization; after a few hundred iterations, the end result is a structurally sound version of the unstable original. It is hoped that this hybrid of top-down and bottom-up design strategies offers an architecture that is ultimately strengthened by its contingencies.
keywords	rigid body analysis, machine learning, multi-agent structural optimization, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:49

_id	sigradi2016_636
id	sigradi2016_636
authors	Lacroix, Igor; Paranhos, Paulo Henrique; Aviani, Francisco Leite; Silva, Neander Furtado
year	2016
title	Estudo de detalhamento estrutural da Catedral de Palmas – TO, Brasil [Structural study of Palmas Cathedral, Brazil]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.528-533
summary	This article presents a study for the structure of Palmas Cathedral, designed by architect Paulo Henrique Paranhos. The goal is to gather a set of parametric modeling and rapid prototyping techniques, aiming the efficiency and automation of parts of the design and fabrication process for the steel truss that constitutes the coverage of the project in question. It discusses the expansion of the architect’s work field. Once the professional holds the application of advanced technologies focusing on construction and manufacturing, will be able to take responsibility for parts of the engineering design.
keywords	Collaboration; Parametric design; Rapid prototyping; Structural design; Steel structure
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_144
id	ecaade2017_144
authors	Lange, Christian J.
year	2017
title	Elements \| robotic interventions II
doi	https://doi.org/10.52842/conf.ecaade.2017.1.671
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 671-678
summary	Reviewing the current research trends in robotic fabrication around the world, the trajectory promises new opportunities for innovation in Architecture and the possible redefinition of the role of the Architect in the industry itself. New entrepreneurial, innovative start-ups are popping up everywhere challenging the traditional model of the architect. However, it also poses new questions and challenges in the education of the architect today. What are the appropriate pedagogical methods to instill enthusiasm for new technologies, materials, and craft? How do we avoid the pure application of pre-set tools, such as the use of the laser cutter has become, which in many schools around the world has caused problems rather than solving problems? How do we teach students to invent their tools especially in a society that doesn't have a strong background in the making? The primary focus of this paper is on how architectural CAAD/ CAM education through the use of robotic fabrication can enhance student's understanding, passion and knowledge of materiality, technology, and craftsmanship. The paper is based on the pedagogical set-up and method of an M. Arch I studio that was taught by the author in fall 2016 with the focus on robotic fabrication, materiality, traditional timber construction systems, tool design and digital and physical craftsmanship.
keywords	CAAD Education, Digital Technology, Craftsmanship, Material Studies, Tool Design, Parametric Modeling, Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_045
id	ecaade2016_045
authors	Lo, Tian Tian, Schnabel, Marc Aurel and Moleta, Tane
year	2016
title	A Simple System for Complex Mass Housing Design Collaborations - A system development framework
doi	https://doi.org/10.52842/conf.ecaade.2016.2.137
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 137-146
summary	Through the lens of participatory mass housing the paper explores the conference theme of simplicity and complexity. A suitable home is a deep rooted desire in the heart of people, and everyone has their own vision of what is a suitable home. Yet the multi-faceted social needs of housing and how they are being designed and developed in mass housing buildings appear too complex and appear too costly that the process would involve direct user participations. The authors have developed a Computer Aided Participatory Housing Design System (CAPHDS) to allow end users (future occupants) become active stakeholders in the design process with the aid of computational design instruments. These tools allow end users to actively engage in the process. The paper describes how a mass housing design process can be broken down into a set of simple tasks that encourage the active engagement and joint development of end users and architects with the proposed design.
wos	WOS:000402064400013
keywords	Participatory design; housing design system; computer-aided; bottom-up
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia16_214
id	acadia16_214
authors	Schwartz, Mathew
year	2016
title	Use of a Low-Cost Humanoid for Tiling as a Study in On-Site Fabrication: Techniques and Methods
doi	https://doi.org/10.52842/conf.acadia.2016.214
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 214-223
summary	Since the time architecture and construction began embracing robotics, the pre-fab movement has grown rapidly. As the possibilities for new design and fabrication emerge from creativity and need, the application and use of new robotic technologies becomes vital. This movement has been largely focused on the deployment of industrial-type robots used in the (automobile) manufacturing industry for decades, as well as trying to apply these technologies into off-site building construction. Beyond the pre-fab (off-site) conditions, on-site fabrication offers a valuable next step to implement new construction methods and reduce human work-related injuries. The main challenge in introducing on-site robotic fabrication/construction is the difficulty in calibrating robot navigation (localization) in an unstructured and constantly changing environment. Additionally, advances in robotic technology, similar to the revolution of at-home 3D printing, shift the ownership of modes of production from large industrial entities to individuals, allowing for greater levels of design and construction customization. This paper demonstrates a low-cost humanoid robot as highly customizable technology for floor tiling. A novel end-effector design to pick up tiles was developed, along with a localization system that can be applied to a wide variety of robots.
keywords	humanoid robot, digital fabricaiton, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ascaad2016_012
id	ascaad2016_012
authors	Veloso, Pedro; Ramesh Krishnamurti
year	2016
title	On Slime Molds and Corridors - The application of network design algorithms to connect architectural arrangements
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 95-104
summary	The use of adjacency graphs to represent and generate architectural arrangements tends to favor direct connections between contiguous rooms. These disregard specialized circulatory systems (such as corridors), which consider connections between non-contiguous spatial units or accesses. This paper addresses two specific issues: (1) how to represent a circulation network for a specific access/adjacency graph embedding; and (2) how to design good circulatory solutions for the arrangement that optimizes this network. To represent a complete circulation network, we propose a scheme, an adapted straight skeleton, based on the boundaries of the spatial units. To design possible circulation alternatives, we adopt the Slime Mold model (Tero et al., 2006; 2007). Using this model, we develop an original method, termed Adjacency Graph Selection (AGS), to generate circulation solutions for arrangements. As an initial test case for AGS, we use floor plan of the Louvre Abu Dhabi, designed by the French architect Jean Nouvel.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	lasg_whitepapers_2016_fulltext
id	lasg_whitepapers_2016_fulltext
year	2016
title	Living Architecture Systems Group White Papers 2016
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
last changed	2019/07/29 14:02

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
wos	WOS:000402063700058
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_049
id	ascaad2016_049
authors	Abdelsabour, Inas; Heba Farouk
year	2016
title	Impact of Using Structural Models on Form Finding - Incorporating Practical Structural Knowledge into Design Studio
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 483-492
summary	Physical Models as an architectural design tool, had major effect on architecture learning process. In structural form finding, it helped in improving visual design thinking to track form creation processes during form finding design stage. The aim is to study the impact of using physical models for second year architecture students in design studios learning. By analyzing and comparing students’ performance and progress; to clarify the effect of using physical models as a tool for designing progression, followed by analytical study on the students' structural models, in order to investigate the influence of models on their design educational progress. Research achieved that there were three basic phases the students pass through during form finding process when used manual physical models that improve the students' design capability.
series	ASCAAD
email
last changed	2017/05/25 13:33

For more results click below: