Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 105

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_224
id	acadia16_224
authors	Schwinn, Tobias; Krieg, Oliver David; Menges, Achim
year	2016
title	Robotic Sewing: A Textile Approach Towards the Computational Design and Fabrication of Lightweight Timber Shells
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 224-233
doi	https://doi.org/10.52842/conf.acadia.2016.224
summary	Unlike any other building material, timber has seen numerous innovations in design, manufacturing, and assembly processes in recent years. Currently available technology not only allows architects to freely shape building elements but also to define their micro- or macroscopic material make-up and therefore the material itself. At the same time, timber shells have become a focus of research in wood architecture by rethinking both construction typologies and material application. Their main advantage, however, also poses a challenge to its construction: As the shell is both the load-bearing structure as well as enclosure, its segmentation and the individual segment’s connections become increasingly important. Their complex and often differentiated geometries do not allow for standardized timber joints, and with decreasing material thickness, conventional connection techniques become less feasible. The research presented in this paper investigates textile strategies for the fabrication of ultra-lightweight timber shells in architecture. Specifically, a robotic sewing method is developed in conjunction with a computational design method for the development of a new construction system that was evaluated through a large-scale prototype building.
keywords	textile connection, robotic fabrication, timber construction, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2016_787
id	caadria2016_787
authors	Knapp, Chris; Jonathan Nelson, Andrew Kudless and Sascha Bohnenberger
year	2016
title	Lightweight material prototypes using dense bundled systems to emulate an ambient environment
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 787-796
doi	https://doi.org/10.52842/conf.caadria.2016.787
summary	This paper describes and reflects upon a computational de- sign and digital fabrication research project that was developed and implemented over 2014-2015, with subsequent development continu- ing for applications at present. The aim of the research was to develop methods of modelling, analysis, and fabrication that facilitate integra- tive approaches to architectural design and construction. In this con- text, the development of material prototypes, digital simulations, and parametric frameworks were pursued in parallel in order to inform and reform successive iterations throughout the process, leading to a re- fined workflow for engineering, production, and speculation upon fu- ture directions of the work.
keywords	Digital fabrication; biomimicry; ambient environments; grasshopper; computational design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia16_382
id	acadia16_382
authors	Lopez, Deborah; Charbel, Hadin; Obuchi, Yusuke; Sato, Jun; Igarashi, Takeo; Takami, Yosuke; Kiuchi, Toshikatsu
year	2016
title	Human Touch in Digital Fabrication
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 382-393
doi	https://doi.org/10.52842/conf.acadia.2016.382
summary	Human capabilities in architecture-scaled fabrication have the potential of being a driving force in both design and construction processes. However, while intuitive and flexible, humans are still often seen as being relatively slow, weak, and lacking the exacting precision necessary for structurally stable large-scale outputs—thus, hands-on involvement in on-site fabrication is typically kept at a minimum. Moreover, with increasingly advanced computational tools and robots in architectural contexts, the perfection and speed of production cannot be rivaled. Yet, these methods are generally non-engaging and do not necessarily require a skilled labor workforce, bringing to question the role of the craftsman in the digital age. This paper was developed with the focus of leveraging human adaptability and tendencies in the design and fabrication process, while using computational tools as a means of support. The presented setup consists of (i) a networked scanning and application of human movements and human on-site positioning, (ii) a lightweight and fast-drying extruded composite material, (iii) a handheld “smart” tool, and (iv) a structurally optimized generative form via an iterative feedback system. By redistributing the roles and interactions of humans and machines, the hybridized method makes use of the inherently intuitive yet imprecise qualities of humans, while maximizing the precision and optimization capabilities afforded by computational tools—thus incorporating what is traditionally seen as “human error” into a dynamically engaging and evolving design and fabrication process. The interdisciplinary approach was realized through the collaboration of structural engineering, architecture, and computer science laboratories.
keywords	human computer interaction and design, craft in design, tool streams and tool building, cognate streams, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	sigradi2016_807
id	sigradi2016_807
authors	Naboni, Roberto
year	2016
title	Form-finding to fabrication of super-thin anisotropic gridshell
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.418-425
summary	The paper discusses the process of computational design, analysis and fabrication for a lightweight super-thin gridshell structure. Digital form-finding based on Particle Spring Systems is used to define a compression-based shape, which is discretized through a parametric process into box-shaped components with embedded assembly and structural logics. Strategies to maximize the behaviour of anisotropic construction boards, double curved forms and assembly precision are described. Results are thoroughly documented to highlight the potential of the approach to rapidly build temporary gridshell structures.
keywords	Digital Form-Finding, Particle-Spring System, Gridshell structures, Digital Fabrication, Catenary
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	acadia16_326
id	acadia16_326
authors	Wit, Andrew; Ng, Rashida; Zhang, Cheng; Kim Simon
year	2016
title	Composite Systems for Lightweight Architectures: Case studies in large-scale CFRP winding
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 326-331
doi	https://doi.org/10.52842/conf.acadia.2016.326
summary	The introduction of lightweight Carbon Fiber Reinforced Polymer (CFRP) based systems into the discipline of architecture and design has created new opportunities for form, fabrication methodologies and material efficiencies that were previously difficult if not impossible to achieve through the utilization of traditional standardized building materials. No longer constrained by predefined material shapes, nominal dimensions, and conventional construction techniques, individual building components or entire structures can now be fabricated from a single continuous material through a means that best accomplishes the desired formal and structural objectives while creating minimal amounts of construction waste and disposable formwork. This paper investigates the design, fabrication and structural potentials of wound, pre-impregnated CFRP composites in architectural-scale applications through the lens of numeric and craft based composite winding implemented in two unique research projects (rolyPOLY + Cloud Magnet). Fitting into the larger research agenda for the CFRP-based robotic housing prototype currently underway in the “One Day House” initiative, these two projects also function as a proof of concept for CFRP monocoque and gridshell based structural systems. Through a rigorous investigation of these case studies, this paper strives to answer several questions about the integration of pre-impregnated CFRP in future full-scale interventions: What form-finding methodologies lend themselves to working with CFRP? What are the advantages and disadvantages of working with pre-impregnated CFRP tow in large-scale applications? What are efficient methods for the placement of CFRP fiber on-site? As well as how scalable is CFRP?
keywords	form finding, winding, cfrp, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
wos	WOS:000402063700058
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_055
id	ecaade2016_055
authors	Baranovskaya, Yuliya, Prado, Marshall, Dörstelmann, Moritz and Menges, Achim
year	2016
title	Knitflatable Architecture - Pneumatically Activated Preprogrammed Knitted Textiles
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 571-580
doi	https://doi.org/10.52842/conf.ecaade.2016.1.571
wos	WOS:000402063700062
summary	Textiles are widely used in architecture for tensile structures, as they are lightweight and can easily span large distances. These structures typically require an external framework for a support. Inflatable structures are self-supporting but are limited to relatively simple forms or require complex and predetermined cut patterns. The development of an adaptive and programmable textile system with an integrative method for pneumatic activation would create a novel self-supporting structure with high degree of design and architectural potential. This creates a highly integrative hybrid system where the generic pneumatic membranes are constrained by the differentiated knitted textile skin that is stretched in several directions under air pressure. This allows for an innovative, lightweight, easily transportable design, where the preprogrammed knitting pattern defines the structure, geometry and formation, activated under pneumatic pressure.
keywords	programming textiles; binary textiles; analogue computing; air inflation; grading textile properties
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_238
id	ecaade2016_238
authors	Meagher, Mark and Langley, Phillip
year	2016
title	TopoBIM: Web-based Spatial Topology for Early Design Participation
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 663-672
doi	https://doi.org/10.52842/conf.ecaade.2016.2.663
wos	WOS:000402064400067
summary	TopoBIM is a 3D web-based viewer for BIM data that facilitates the capture of stakeholder knowledge related to project requirements and constraints in early design. The software provides an interface for viewing 3D models and data for selected room types and adding topological annotations. The use of topological representation is proposed as a method for facilitating knowledge capture, allowing decisions about the details of plan layout to be deferred and widening the potential for participation in the early stage design process. Topological representation is widely employed in the engineering disciplines, but is not commonly used as a means of capturing schematic information in early design. TopoBIM is proposed as a methodology and workflow for the introduction of topology in early design, and as an example of lightweight, bespoke software that informs design by allowing stakeholders to perform specific tasks using BIM data, without the constraints and limiting complexity of BIM authoring environments.
keywords	Early design; Topological representation; Participation; BIM; Knowledge capture
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia16_254
id	acadia16_254
authors	Sharmin, Shahida; Ahlquist, Sean
year	2016
title	Knit Architecture: Exploration of Hybrid Textile Composites Through the Activation of Integrated Material Behavior
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 254-259
doi	https://doi.org/10.52842/conf.acadia.2016.254
summary	The hybrid system in textile composites refers to the structural logic defined by Heino Engel, which describes a system that integrates multiple structural behaviors to achieve an equilibrium state (Engel 2007). This research explores a material system that can demonstrate a hybrid material behavior defined by the differentiated tensile and bending-active forces in a single, seamless knitted composite material. These behaviors were installed during the materialization phase and activated during the composite formation process. Here, the material formation involves two interdependent processes: 1) development of the knitted textile with integrated tensile and reinforced materials and 2) development of the composite by applying pre-stress and vacuuming the localized area with reinforcements in a consistent resin-based matrix. The flat bed industrial weft knitting machine has been utilized to develop the knitted textile component of the system with a controlled knit structure. This enables us to control the material types, densities, and cross sections with integrated multiple layers/ribs and thus, the performance of the textile at the scale of fiber structure. Both of these aspects were researched in parallel, using physical and computational methods informed and shaped by the potentials and constraints of each other. A series of studies has been utilized to develop small-scale prototypes that depict the potential of the hybrid textile composite as the generator of complex form and bending active structures. Ultimately, it indicates the possibilities of hybrid textile composite materials as self-structuring lightweight components that can perform as highly articulated and differentiated seamless architectural elements that are capable of transforming the perception of light, space, and touch.
keywords	form-finding, programmable materials, composite forming processes, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2016_234
id	ecaade2016_234
authors	Sousa, José Pedro and Martins, Pedro Filipe
year	2016
title	The Robotic Production of the GRC Panels in the CorkCrete Arch Project - A stratified strategy for the fabrication of customized molds
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 153-160
doi	https://doi.org/10.52842/conf.ecaade.2016.1.153
wos	WOS:000402063700017
summary	The CorkCrete Arch was an experimental prototype built in the scope of a research project concerning the use of robotic fabrication technologies for non-standard solutions in architecture. It combined 2 materials, cork and GRC into a self-supporting lightweight building system, designed to explore the integration of different robotic fabrication technologies in one constructive solution. This paper is focused in providing a detailed description and analysis of the robotic fabrication process used in the production of the GRC components. The presented solution integrated robotic milling and hot-wire cutting technologies with a stratified mold design strategy that allowed for overcoming the limitations of each and enabled a time and cost efficient production process.
keywords	Robotic Hot-Wire Cutting; Digital Fabrication; Glass Fiber Reinforced Concrete; Computational Design; Corkcrete
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201614402
id	ijac201614402
authors	Symeonidou, Ioanna
year	2016
title	Flexible matter: A real-time shape exploration employing analogue and digital form-finding of tensile structures
source	International Journal of Architectural Computing vol. 14 - no. 4, 322–332
summary	The article presents a research on real-time shape exploration employing analogue and digital form-finding and concludes with a proposal for a teaching methodology that led to an intensive student workshop which took place at the Institute of Architecture and Media at Graz University of Technology. The aim was to experiment with analogue and digital tools in parallel, counter-informing the design process. The experiments involved physical form-finding following the tradition of Frei Otto at the Institute of Lightweight Structures in Stuttgart as well as computational form- finding employing mainly dynamic relaxation techniques of spring-particle systems. The combination of techniques and methodologies eventually led to a feedback loop across different media that explored both qualitative and quantitative characteristics of the projects at hand. By establishing feedback between digital media and physical prototypes, the creative process is immediately informed by the material characteristics and properties which in turn give rise to a real-time exploration of form. Simulations of physical forces for architectural form generation are increasingly gaining ground in architectural education as there is a broad selection of computational tools readily available that allow quick experiments to be conducted.
keywords	Form-finding, analogue–digital, parametric design, tensile structures, computational physics simulation, experiential learning
series	journal
email
last changed	2016/12/09 10:52

_id	caadria2016_777
id	caadria2016_777
authors	Aditra, Rakhmat F. and Andry Widyowijatnoko
year	2016
title	Combination of mass customisation and conventional construction: A case study of geodesic bamboo dome
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 777-786
doi	https://doi.org/10.52842/conf.caadria.2016.777
summary	With the development of advance fabrication, several digi- tal fabrication approaches have been developed. These approaches en- able better form exploration than the conventional manufacturing pro- cess. But, the built examples mostly rely on advance machinery which was not familiar or available in developed country where construction workers are still abundant. Meanwhile, much knowledge gathers in the field practice. This research is aimed to explore an alternative con- struction workflow and method with the combination of mass custom- ization and conventional construction method and to propose the structure system that emphasized this alternative workflow and meth- od. Lattice structure was proposed. The conventional construction method was used in the struts production and mass customization method, laser cutting, and was used for connection production. The algorithmic process was used mainly for data mining, details design, and component production. The backtracking was needed to be pre- dicted and addressed previously. Considerations that will be needed to be tested by further example are on the transition from the digital pro- cess to the manual process. Next research could be for analysing the other engineering aspect for this prototype and suggesting other struc- tural system with more optimal combination of conventional construc- tion and mass customization.
keywords	Mass customisation; algorithmic design; digital fabrication; geodesic dome; lattice structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2016_448
id	sigradi2016_448
authors	Afsari, Kereshmeh; Eastman, Charles M.; Shelden, Dennis R.
year	2016
title	Data Transmission Opportunities for Collaborative Cloud-Based Building Information Modeling
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.907-913
summary	Collaboration within Building Information Modeling process is mainly based on file transfer while BIM data being exchanged in either vendor specific file formats or neutral format using Industry Foundation Classes (IFC). However, since the Web enables Cloud-based BIM services, it provides an opportunity to exchange data via Web transfer services. Therefore, the main objective of this paper is to investigate what features of Cloud interoperability can assist a network-based BIM data transmission for a collaborative work flow in the Architecture, Construction, and Engineering (AEC) industry. This study indicates that Cloud-BIM interoperability needs to deploy major components such as APIs, data transfer protocols, data formats, and standardization to redefine BIM data flow in the Cloud and to reshape the collaboration process.
keywords	BIM; Cloud Computing; Data Transmission; Interoperability; IFC
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_797
id	caadria2016_797
authors	Agusti?-Juan, Isolda and Guillaume Habert
year	2016
title	An environmental perspective on digital fabrication in architecture and construction
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 797-806
doi	https://doi.org/10.52842/conf.caadria.2016.797
summary	Digital fabrication processes and technologies are becom- ing an essential part of the modern product manufacturing. As the use of 3D printing grows, potential applications into large scale processes are emerging. The combined methods of computational design and robotic fabrication have demonstrated potential to expand architectur- al design. However, factors such as material use, energy demands, du- rability, GHG emissions and waste production must be recognized as the priorities over the entire life of any architectural project. Given the recent developments at architecture scale, this study aims to investi- gate the environmental consequences and opportunities of digital fab- rication in construction. This paper presents two case studies of classic building elements digitally fabricated. In each case study, the projects were assessed according to the Life Cycle Assessment (LCA) frame- work and compared with conventional construction with similar func- tion. The analysis highlighted the importance of material-efficient de- sign to achieve high environmental benefits in digitally fabricated architecture. The knowledge established in this research should be di- rected to the development of guidelines that help designers to make more sustainable choices in the implementation of digital fabrication in architecture and construction.
keywords	Digital fabrication; LCA; sustainability; environment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_ws-folding
id	ecaade2016_ws-folding
authors	Akleman, Ergun, Kalantar, Negar and Borhani, Alireza
year	2016
title	Folding The Unfoldable - A Method For Constructing Complex-Curved Geometry With Quad Edge Panels
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 69-72
doi	https://doi.org/10.52842/conf.ecaade.2016.1.069
wos	WOS:000402063700007
summary	This paper explains a method will be used during a workshop for constructing complex-curved geometry with quad edge panels. In this workshop, we demonstrate that quad-edge mesh data structure can efficiently be used to construct complex large shapes. With hands-on experiments, we will show a vast variety of shapes can be constructed using square, rectangular, parallelogram and extruded-line shaped panels. In addition, using a system we have recently developed to unfold polygonal mesh, we will demonstrate how desired shapes can be constructed by using laser-cut quadrilateral panels. This approach is particularly suitable to construct complicated sculptural and architectural shapes from anisotropic materials that can only be bended in one direction.
keywords	Shape Modeling; Physical Construction; Complex-Curved Geometry; Digital Fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_615
id	sigradi2016_615
authors	Almeida , Rafael Goffinet de; Santos, Fábio Lopes Souza
year	2016
title	Um olhar sobre a relação entre sujeitos e meios técnicos: O público como construção social mediada [Looking at the relationship between subjects and technical means: The audience as mediated social construction]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.872-879
summary	This article analyses some of the proposals produced in the late 1970´s by the American contemporary artist Dan Graham, in which he uses technical means to investigate the audience´s perception and behavior. The questions raised highlight reciprocity phenomena and identity constructions – factors that affect our experience and behavior in contemporary cities daily life. All of these issues derive from Graham´s investigations of the main information and communication technologies (media) produced at that time, and which continue to offer reflections on current relationship between technical means and the subject – that is, his/her condition as audience, observer, spectator or user.
keywords	Dan Graham; Contemporary art; Contemporary Architecture and City; Technical means; Contemporary spatiality
series	other
type	normal paper
email
last changed	2017/06/21 14:49

_id	acadia16_54
id	acadia16_54
authors	Andreen, David; Jenning, Petra; Napp, Nils; Petersen, Kirstin
year	2016
title	Emergent Structures Assembled by Large Swarms of Simple Robots
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 54-61
doi	https://doi.org/10.52842/conf.acadia.2016.054
summary	Traditional architecture relies on construction processes that require careful planning and strictly defined outcomes at every stage; yet in nature, millions of relatively simple social insects collectively build large complex nests without any global coordination or blueprint. Here, we present a testbed designed to explore how emergent structures can be assembled using swarms of active robots manipulating passive building blocks in two dimensions. The robot swarm is based on the toy “bristlebot”; a simple vibrating motor mounted on top of bristles to propel the body forward. Since shape largely determines the details of physical interactions, the robot behavior is altered by carefully designing its geometry instead of uploading a digital program. Through this mechanical programming, we plan to investigate how to tune emergent structural properties such as the size and temporal stability of assemblies. Alongside a physical testbed with 200 robots, this work involves comprehensive simulation and analysis tools. This simple, reliable platform will help provide better insight on how to coordinate large swarms of robots to construct functional structures.
keywords	emergent structures, mechanical intelligence, swarm robotics
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
doi	https://doi.org/10.52842/conf.acadia.2017.102
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: