Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 620

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_254
id	acadia16_254
authors	Sharmin, Shahida; Ahlquist, Sean
year	2016
title	Knit Architecture: Exploration of Hybrid Textile Composites Through the Activation of Integrated Material Behavior
doi	https://doi.org/10.52842/conf.acadia.2016.254
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 254-259
summary	The hybrid system in textile composites refers to the structural logic defined by Heino Engel, which describes a system that integrates multiple structural behaviors to achieve an equilibrium state (Engel 2007). This research explores a material system that can demonstrate a hybrid material behavior defined by the differentiated tensile and bending-active forces in a single, seamless knitted composite material. These behaviors were installed during the materialization phase and activated during the composite formation process. Here, the material formation involves two interdependent processes: 1) development of the knitted textile with integrated tensile and reinforced materials and 2) development of the composite by applying pre-stress and vacuuming the localized area with reinforcements in a consistent resin-based matrix. The flat bed industrial weft knitting machine has been utilized to develop the knitted textile component of the system with a controlled knit structure. This enables us to control the material types, densities, and cross sections with integrated multiple layers/ribs and thus, the performance of the textile at the scale of fiber structure. Both of these aspects were researched in parallel, using physical and computational methods informed and shaped by the potentials and constraints of each other. A series of studies has been utilized to develop small-scale prototypes that depict the potential of the hybrid textile composite as the generator of complex form and bending active structures. Ultimately, it indicates the possibilities of hybrid textile composite materials as self-structuring lightweight components that can perform as highly articulated and differentiated seamless architectural elements that are capable of transforming the perception of light, space, and touch.
keywords	form-finding, programmable materials, composite forming processes, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
wos	WOS:000402063700071
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
doi	https://doi.org/10.52842/conf.caadria.2016.631
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_047
id	ascaad2016_047
authors	Algeciras-Rodríguez, José
year	2016
title	Trained Architectonics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 461-468
summary	The research presented here tests the capacity of artificial-neural-network (ANN) based multi-agent systems to be implemented in architectural design processes. Artificial Intelligence algorithms allow for a new approach to design, taking advantage of its generic functioning to produce meaningful outcomes. Experimentation within this project is based on Self-Organizing Maps (SOMs) and takes advantage of its behavior in topology to produce architectural geometry. SOMs as full stochastic processes involve randomness, uncertainty and unpredictability as key features to deal with during the design process. Following this behavior, SOMs are used to transmit information, which, instead of being copied, is reproduced after a learning (training) process. Pre-existent architectural objects are taken as learning models as they have been considered masterpieces. In this context, by defining the SOM input set, masterpieces become measurement elements and can be used to set a distance to the new element position in a comparatistic space. The characteristics of masterpieces get embedded within the code and are transmitted to 3D objects. SOM produced objects from a population with shared characteristics where the masterpiece position is its probabilistic center point.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_008
id	ascaad2016_008
authors	Armstrong, Logan; Guy Gardner and Christina James
year	2016
title	Evolutionary Solar Architecture - Generative Solar Design Through Soft Forms and Rigid Logics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 55-64
summary	This paper describes the development of a workflow for the production of a net zero off-grid research cabin. The workflow deploys a number of affiliated parametric software packages as a form finding tool for the exterior envelope of this structure, with a focus on passive solar design as a generative formal driver. The design was required to incorporate the spatial and programmatic needs of the users in a compact, barrier free, net zero building. Simultaneously, the research question asked the designers to harness the potential of digital design in the consideration of future fabrication techniques, in order to optimize the building’s performance and the speed and quality of assembly once the project moves into construction. Parameters considered include solar exposure, external surface area, cost, fabrication, functionality, and aesthetic criteria. This project was developed by a multidisciplinary team of graduate students at the University of Calgary.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	caadria2016_013
id	caadria2016_013
authors	Aschwanden, Gideon D.P.A.
year	2016
title	Neighbourhood detection with analytical tools
doi	https://doi.org/10.52842/conf.caadria.2016.013
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 13-22
summary	The increasing population size of cities makes the urban fabric ever more complex and more disintegrated into smaller areas, called neighbourhoods. This project applies methods from geoscience and software engineering to the process of identification of those neighbourhoods. Neighbourhoods, by nature, are defined by connec- tivity, centrality and similarity. Transport and geospatial datasets are used to detect the characteristics of places. An unsupervised learning algorithm is then applied to sort places according to their characteris- tics and detect areas with similar make up: the neighbourhood. The at- tributes can be static like land use or space syntax attributes as well as dynamic like transportation patterns over the course of a day. An un- supervised learning algorithm called Self Organizing Map is applied to project this high dimensional space constituting of places and their attributes to a two dimensional space where proximity is similarity and patterns can be detected – the neighbourhoods. To summarize, the proposed approach yields interesting insights into the structure of the urban fabric generated by human movement, interactions and the built environment. The approach represents a quantitative approach to ur- ban analysis. It reveals that the city is not a polychotomy of neigh- bourhoods but that neighbourhoods overlap and don’t have a sharp edge.
keywords	Data analytics; urban; learning algorithms; neighbourhood delineation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_228
id	ecaade2016_228
authors	Balaban, Ozgun and Tuncer, Bige
year	2016
title	Visualizing Urban Sports Movement
doi	https://doi.org/10.52842/conf.ecaade.2016.2.089
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 89-94
summary	In this study, a visualization tool that maps outdoor physical activity such as runs on a map by specifying time, location, activity, gender, age group, etc. is created. This tool reveals the usage patterns of streets within a city for outdoor physical activity. This tool is created within a larger research project that investigates the influence of streets on the leisure walking activity within cities. For this purpose, the tool is capable of presenting the collected multi-modal data that includes personal fitness data, weather data, spatial data, and crime data. Moreover, the tool creates new analysis capabilities such as displaying usage of streets by urban joggers. The research project in which this tool will be used is aimed for designers/planners to improve streets for 'runnability'.
wos	WOS:000402064400008
keywords	Sports Activity; Big Data; Urban Visualization; Fitness Applications
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_150
id	ecaade2016_150
authors	Barczik, Günter and Kruse, Rolf
year	2016
title	Shifting Design Work from Production to Evaluation - An Evolutive Design Tool
doi	https://doi.org/10.52842/conf.ecaade.2016.2.109
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 109-115
summary	We are developing an evolutive design tool that seeks to facilitate a shift in the focus of the process of designing architecture: away from the production of design alternatives or options towards an evaluation of semi-automatically generated ones. We work towards outsourcing the production of design alternatives in a given design task to a CAD tool and thereby give human designers more time to evaluate and discuss those alternatives and guide the tool in the production of improved alternatives. The format of our work is an experimental student design and research project where architects and computer scientists collaborate. Though the project is in a very early stage, our aim is to ultimately shift the focus of human designers' involvement from production of design options to the evaluation of those, in order to give humans more time to think, discuss, find, analyze and include many different points of view and make it easier for them to be impartial in finding optimal solutions. We developed a design tool that uses interactive evolutionary algorithms to support exploration of design options.
wos	WOS:000402064400010
keywords	Genetic Algorithm; Evolutive Design Strategy; Interactive evolutionary computation
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia16_432
id	acadia16_432
authors	Beaman, Michael Leighton
year	2016
title	Landscapes After The Bifurcation of Nature: Models for Speculative Landformations
doi	https://doi.org/10.52842/conf.acadia.2016.432
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 432-439
summary	Landformations have not historically been the purview of design production or intervention. Whether it is the spatial extensions in which they emerge, the temporal extensions in which they operate, the complexities of their generative and sustaining processes, or a cultural and institutional deference to a notion of natural processes, designers as individuals or design as a discipline has not treated landformation as an area of design inquiry. But the inability to grasp nature fully has not stopped geological-scale manipulation by humans. In fact, anthropogenic activity is responsible for the re-formation of more of the Earth’s surface than all other agents combined. And yet as designers we often disregard this transformation as a design problem, precisely because it eludes the artifices of information visualization employed by designers. This paper examines ongoing research into the generation of speculative landformations through an analysis of underlying geological and anthropogenic processes as the quantitative basis for creating generative computational models (figure 1). The Speculative Landformations Project posits human geological-scale activity as a design problem by expanding the operability and agency of environmental design practice through hybrid human/digital computations.
keywords	design decision-making, simulation and design optimization, responsive urban and landscape systems, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2016_649
id	sigradi2016_649
authors	Bessone, Miriam; Imbach, Graciela; Costa, Matías Dalla; Fritz, Soledad
year	2016
title	Investigación Didáctica colectiva: Caso Taller de Proyecto Arquitectónico 1- Matemática [Didactics - Collective Research: Architectural Project Workshop 1– Mathematics (Case study)]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.211-218
summary	The integration of ICT in education enables the development of didactic strategies related to the subjectivities of the present. Specifically, the integration of the parametric modelling implies the organization of complex strategies and the exchange of collaborative work among teachers from different disciplines, ages, viewpoints, and assessment criteria. This exchange encourages a multidirectional dialogue among subjects, knowledge, areas and media. And thus the integration of ICT and the multidirectional dialogue provide the opportunity to bring together contents which seemed to be blocked up until now. It is within this cultural field where the digital technologyconnects the mathematics with the architectural project, redefining the historical link between both.
keywords	Collective Research; Teachin; Mathematics; Parametric modelling; Architectural project
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_672
id	sigradi2016_672
authors	Bianchi, Alejandra S.; Tripaldi, Gustavo A.; Pintos, Gladis E.; Iturriaga, José R.; Vargas, Sergio D.
year	2016
title	Impacto del mundo digital sobre las representaciones gráficas del dise?o arquitectónico. La experiencia en el Taller Virtual de Arquitectura IV-UPC-UNNE [Digital world impact over the graphics representations of the architectural design. The experience in the virtual workshop of architecture IV-UPC-UNNE]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.123-128
summary	The present work explains the preliminary results of the Research project that the authors are working on to know the way in which the architecture students of the UNNE represent the architectural object with analogues and digital methods. It wants to express the impact of the digital world over the representations through cross sections in five moments of their formation (beginner’s level, first, second, fourth and sixth years) in the school calendars 2013 to 2016. This qualitative research, descriptive and explanatory, expands in the virtual workshop, an innovative and unique experience of a collaborative workshop between the subjects of Architecture IV of different Universities.
keywords	Graphic Representation, Architectural Design, Virtual Workshop
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_154
id	acadia16_154
authors	Brugnaro, Giulio; Baharlou, Ehsan; Vasey, Lauren; Menges, Achim
year	2016
title	Robotic Softness: An Adaptive Robotic Fabrication Process for Woven Structures
doi	https://doi.org/10.52842/conf.acadia.2016.154
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 154-163
summary	This paper investigates the potential of behavioral construction strategies for architectural production through the design and robotic fabrication of three-dimensional woven structures inspired by the behavioral fabrication logic used by the weaverbird during the construction of its nest. Initial research development led to the design of an adaptive robotic fabrication framework composed of an online agent-based system, a custom weaving end-effector and a coordinated sensing strategy utilizing 3D scanning.The outcome of the behavioral weaving process could not be predetermined a priori in a digital model, but rather emerged out of the negotiation among design intentions, fabrication constraints, performance criteria, material behaviors and specific site conditions. The key components of the system and their role in the fabrication process are presented both theoretically and technically, while the project serves as a case study of a robotic production method envisioned as a soft system: a flexible and adaptable framework in which the moment of design unfolds simultaneously with fabrication, informed by a constant flow of sensory information.
keywords	soft systems, agent-based systems, robotic fabrication, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2016_027
id	ecaade2016_027
authors	Carl, Timo and Stepper, Frank
year	2016
title	"Free Skin" Collaboration - Negotiating complex design criteria across different scales with an interdisciplinary student team
doi	https://doi.org/10.52842/conf.ecaade.2016.1.591
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 591-600
summary	The complex nature of architecture requires often planning teams with specialists from multiple disciplines. Architectural education however, addresses this interdisciplinary modus operandi rarely. This paper presents the design and production process of a real world solar façade installation realized at the University of Kassel to illustrating the potentials of such an approach. Interdisciplinary teamwork allowed students not only to solve complex problems, but also to produce knowledge and to advance into design research. Student exploration resulted in a unique fabrication technique, combining tensile fabric and resin to facilitate the fabrication of multifunctional, monocoque shells; combining all necessary technical components in a single building element. This paper discusses the success of student collaboration and teaching strategies for key parts of the design process at different scales. Moreover, it highlights the importance of physical form-finding models and an analogue - digital workflow for collaborative communication. The Free Skin project offers both insight into applied use of interdisciplinary teamwork, and a proposal for incorporating such collaboration into architectural education.
wos	WOS:000402063700064
keywords	interdisciplinary collaboration; design-build; form-finding; reactive design; shell structures
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2016_639
id	sigradi2016_639
authors	Casimiro, Giovanna Graziosi; Medeiros, Marina Lima
year	2016
title	Cartografias expandidas: Realidade Aumentada e a exposiç?o Memória da Amnésia [Expanded cartography: Augmented Reality and the exhibition Memória da Amnésia]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.880-884
summary	This article analyses the possibilities of expansion of the museum's exhibition space for the urban environment and the new relationships through the development of digital maps and augmented reality geolocated layers. The case study is the Guide of Nomadic Monuments (Guia dos Monumentos Nômades) organized for the exhibition Memory of Amnesia (Memória da Amnésia) that discussed the movement and displacement of statues through the last decades in the city of Sao Paulo, Brazil. The experience of the project is presented from the point of view of the methodological design research, thinking the interface of the city as a backdrop for several experimentations with art collections.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2016_259
id	caadria2016_259
authors	Chen, Jia-Yih and Shao-Chu Huang
year	2016
title	Adaptive Building Facade Optimisation: An integrated Green-BIM approach
doi	https://doi.org/10.52842/conf.caadria.2016.259
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 259-268
summary	This study focused on the optimal design of adaptive build- ing fac?ade for achieving better energy performance. Iterative fac?ade components design are studied between virtual and physical models with integrated tools of BIM, parametric design and sensor devices. The main objectives of this study are: (1) exploring systematic design process via the analysis of adaptive components in responsive fac?ade design; (2) developing compliance checking system for green building regulations; (3) developing optimization system for adaptive fac?ade design process. This paper demonstrated the integration of various digital design methods and concluded with the energy modelling re- sults of a demo project unit for various fac?ade component designs.
keywords	Building fac?ade design; energy performance; design optimization; parametric design; BIM
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2016_096
id	ecaade2016_096
authors	Chen, Nai Chun, Nagakura, Takehiko and Larson, Kent
year	2016
title	Social Media as Complementary Tool to Evaluate Cities - Data Mining Innovation Districts in Boston
doi	https://doi.org/10.52842/conf.ecaade.2016.2.447
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 447-456
summary	High tech industries are playing an important role in the economic development in the United States. While some cities are shrinking, the "innovation" cities are growing. The attributes that cause some cities to successfully become innovative is a very relevant 21st century topic and will be investigated here.Previous work conduct city analysis through conventional government GIS or census data but such analyses do not answer questions about the perception of citizens inhabiting the city, and the activities they conduct. The novelty of this current project is to make use of large-scale bottom-up data available from social media. Several social media sources-CrunchBase, Twitter, Yelp, and Flickr- were data mined pertaining to four innovation districts in Boston. We found that the success of innovation districts in Boston were correlated with several important variables: the most successful districts tended to occur near research institutions, in very "mixed use" areas, and were unexpectedly not correlated with land and labor prices, unlike technology districts in the past. Based on our study, we make recommendations for the urban design that cities should put in place to increase the potential for "innovation".
wos	WOS:000402064400044
keywords	Smart Cities; Social Media; Innovation District; Spatial Analysis; Data Mining; Natural Language Processing
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2016_507
id	caadria2016_507
authors	Choi, Jungsik; Inhan Kim and Jiyong Lee
year	2016
title	Development of schematic estimation system through linking QTO with Cost DB
doi	https://doi.org/10.52842/conf.caadria.2016.507
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 507-516
summary	Cost estimate in architectural projects is an important factor for decision-making and financing the project in both early design phase and detailed design phase. In Korea, estimate work based on 2D drawing has generated problems of difference form QTO according to worker’s mistake and know-how. In addition, 2D-based estimation are obtained uncertainty factors of estimation depending on lack of infor- mation due to becoming larger and more complex than any other pro- ject of the architectural project. In order to solve limitations, this study is to suggest an open BIM-based schematic estimation process and a prototype system within the building frame through linking QTO and cost information. This study consists of the following steps: 1) Ana- lysing Level of Detail (LoD) to apply to the process and system, 2) BIM modelling for open BIM-based QTO, 3) Verifying the quality of the BIM model, 4) Developing a schematic estimation prototype sys- tem. This study is expected to improve work efficiency as well as reli- ability of construction cost.
keywords	Cost DB; Industry Foundation Classes (IFC); Open Building Information Modelling (BIM); schematic estimation; Quantity Take-Off (QTO)
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2016_559
id	caadria2016_559
authors	Cokcan, Baris; Johannes Braumann, W. Winter and Martin Trautz
year	2016
title	Robotic Production of Individualised Wood Joints
doi	https://doi.org/10.52842/conf.caadria.2016.559
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 559-568
summary	Modern modular constructions can consist of highly indi- vidualised elements that are produced at nearly the same efficiency as serial manufacturing. This paper focuses on the project “WoodWaves” an Info-Point for the conference World Congress of Timber Engineer- ing, which was designed with this new conception of modularity. The process utilises a robotically operated milling cutter to form block- board panels out of spruce, which make up the multifunctional infor- mation point. The entire object is produced with only sliding dovetail joints. Parametric design methods were developed to automatically adjust each joint to fit the individual conditions. New CAD/CAM in- terfaces, linking design directly with fabrication, enabled the serial production of 108 different shaped elements with a 6-axis robotic arm.
keywords	Computational design; robotic production; digital fabrication; wood joints; info-point
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: