Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 171

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_249
id	ecaade2017_249
authors	Coraglia, Ugo Maria, Simeone, Davide, Cursi, Stefano, Fioravanti, Antonio, Wurzer, Gabriel and D'Alessandro, Daniela
year	2017
title	A Simulation Model for Logical and Operative Clash Detection
doi	https://doi.org/10.52842/conf.ecaade.2017.2.519
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 519-526
summary	The introduction of the Building Information Modeling (BIM) approach has facilitated the management process of documents produced by different kinds of professionals involved in the design and/or renovation of a building, through identification and subsequent management of geometrical interferences (Clash Detection). The methodology of this research proposes a tool to support Clash Detection, introducing the logical-operative dimension, that may occur with the presence of a construction site within a hospital structure, through the integration of a BIM model within a Game Engine environment, to preserve the continuity of daily hospital activities and trying to reduce negative impacts, times and costs due to construction activities.
keywords	Construction site; Hospital; Game Engine; Gaming; Building Information Modeling (BIM); Simulation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_050
id	ecaade2017_050
authors	Cursi, Stefano, Simeone, Davide and Coraglia, Ugo Maria
year	2017
title	An ontology-based platform for BIM semantic enrichment
doi	https://doi.org/10.52842/conf.ecaade.2017.2.649
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 649-656
summary	In its application to design phases, BIM has progressively shown limits in terms of semantic representation and efficiency of supporting collaboration. This paper investigates the possibilities related to BIM representation enrichment through semantic web approaches, in order to represent knowledge rather than information and presents a prototypal application oriented to the integration of the informative model of the building with a knowledge base developed by means of ontologies, providing a more structured system of interconnected information.
keywords	BIM; Semantic enrichment; Knowledge Management; Ontologies
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_230
id	ecaade2017_230
authors	Simeone, Davide, Cursi, Stefano and Coraglia, Ugo Maria
year	2017
title	Modelling Buildings and their Use as Systems of Agents
doi	https://doi.org/10.52842/conf.ecaade.2017.1.085
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 85-92
summary	This research investigates the development of a new modelling and simulation approach for building design - defined as Agent-Based Building Modelling - that moves from the current object-oriented representation (such as in BIM) to an agent-based one. In the proposed approach, the representation domain is extended in order to include users and hosted activities, and the static modelling of the building is integrated with the dynamic simulation of its functioning. For this purpose, this paper presents a general template of the agent that ensures homogeneity of formalisation of the different typologies of entities (building components, spaces, V-Users, activities) and support the virtual simulation of the use process.
keywords	Agent-Based Modelling and Simulation; Behavioural Simulation; BIM; Game engine; Agent-Based Building Modelling
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_199
id	ecaade2017_199
authors	Al-Douri, Ph.D., Firas
year	2017
title	Computational and Modeling Tools - How effectively are Urban Designers and Planners using them Across the Design Development Process?
doi	https://doi.org/10.52842/conf.ecaade.2017.1.409
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 409-418
summary	Literature suggests that despite the increasing range and variety of computational tools and technologies, they have not really been employed for designing as extensively as it might be. This is due in part to the numerous challenges and impediments limiting their effective usage such as the methodological, procedural, and substantive factors and limitations, and skepticism about their impact of usage on the design process and outcome. The gap in our understanding of how advanced computational tools could support the design activities and design decision-making has expanded considerably to become a new area of inquiry with considerable room for the expansion of knowledge. This research is a single-case study that has been pursued in two phases: literature review and survey followed by analysis and discussion of the empirical results. The empirical observations were compared to the theoretical propositions and with results of similar research to highlight the areas and the extent to what the IT tools' usage have influenced the outcome of the design process. The comparison has helped highlight, explain, and justify the mechanism and improvements in the design outcome. Please write your abstract here by clicking this paragraph.
keywords	Computational urban design; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_038
id	ecaade2017_038
authors	Asanowicz, Aleksander
year	2017
title	Parametric design - Tool, medium or new paradigm?
doi	https://doi.org/10.52842/conf.ecaade.2017.2.379
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 379-386
summary	Parametric design is an emerging research issue in the design domain. However, discussions about the creative process in parametric design are limited. What is more, despite the passing of 57 years of parametric design's existence we still do not know what parametric design is. Is it a simple tool, which is useful in some kind of optimization of the architectural form, or it is a medium, which helps architects develop unexpected solutions, and perhaps this is already a new design paradigm? The presented paper will contain general considerations relating to the nature of parametric design, the history of which starts in 1960, when D.T. Ross has formulated the thesis that our main objective is to formulate constrains and all needed parameters of the solved problem.Please write your abstract here by clicking this paragraph.
keywords	optimisation; parametric design; design tool; design media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_148
id	ecaade2017_148
authors	Baseta, Efilena, Sollazzo, Aldo, Civetti, Laura, Velasco, Dolores and Garcia-Amorós, Jaume
year	2017
title	Photoreactive wearable: A computer generated garment with embedded material knowledge - A computer generated garment with embedded material knowledge
doi	https://doi.org/10.52842/conf.ecaade.2017.2.317
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 317-326
summary	Driven by technology, this multidisciplinary research focuses on the implementation of a photomechanical material into a reactive wearable that aims to protect the body from the ultraviolet radiation deriving from the sun. In this framework, the wearable becomes an active, supplemental skin that not only protects the human body but also augments its functions, such as movement and respiration. The embedded knowledge enables the smart material to sense and exchange data with the environment in order to passively actuate a system that regulates the relation between the body and its surroundings in an attempt to maintain equilibrium. The design strategy is defined by 4 sequential steps: a) The definition of the technical problem, b) the analysis of the human body, c) the design of the reactive material system, as well as d) the digital simulations and the digital fabrication of the system. The aforementioned design strategies allow for accuracy as well as high performance optimization and predictability in such complex design tasks, enabling the creation of customized products, designed for individuals.
keywords	smart materials; wearable technology; data driven design; reactive garment; digital fabrication; performance simulations
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_293
id	ecaade2017_293
authors	D'Amico, Alessandro and Curr?, Edoardo
year	2017
title	From TSL survey to HBIM, issues on survey and information modeling implementation for the built heritage - The case study of the Temple di Bacco Ravello
doi	https://doi.org/10.52842/conf.ecaade.2017.2.039
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 39-48
summary	The research presents an application of HBIM to the recovery process and design, which allows to highlight some potentialities and criticalities of what has become an important instrument in the documentation and conservation of architectural heritage. The object of the research is the Temple di Bacco, built by Lord Girmthorpe as his final resting place and located within the gardens of Villa Cimbrone, Ravello (SA).The survey has presented several difficulties due to the particular configuration of the site, very steep, with very limited space around the object. If on the one hand the TLS obvious to the lack of edges of cylindrical objects, on the other hand it poses problems for the tangency of the scan points. The Scan to BIM methodology has proven to be effective and has allowed to overcome the difficulties associated with the conformation of the artefact and of the site, in the study of the analyzed object. In conclusion, some assessments and results are reported, aimed at sharing and defining strategies and methodologies of scientific validity regarding the application of the HBIM model to a process of recovery and consolidation of an existing building object.
keywords	BIM; HBIM; Built Heritage; TLS; Scan to BIM
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_069
id	ecaade2017_069
authors	D'Uva, Domenico
year	2017
title	Unfolding the design of architecture as a strategy to assess intellectual property - Bridle pirating architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.1.297
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 297-302
summary	Modeling tools are evolving the process of architectural design from the use ordinary digital tool into a role of creator of complex shapes, through coding configurations. These procedures are becoming the structural ground of the architectural shape, going beyond their sole tools role. The increasing in importance of such codes implies a major level of awareness for their use, which is worth of a deeper analysis. The system of relations among parts in an architectural design picks a single configuration among infinite others, because it is produced by a design process which find its fulfillment in the final portray. Through the spreading of digital design tools, such final configuration becomes a step in a clearly reproducible process. The project is achieved through a series of starting conditions, which undergo a parametric process, that produces the final result. An identical parametric process can be applied under slightly different starting conditions and produce completely different results. These results are connected with the code which produced them, but is the authorship still property of the original author?
keywords	Morphogenesis; Parametric; Authorship
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_109
id	ecaade2017_109
authors	Koehler, Daniel
year	2017
title	The city as an element of architecture - Discrete automata as an outlook beyond bureaucratic means
doi	https://doi.org/10.52842/conf.ecaade.2017.1.523
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 523-532
summary	This paper contributes to investigations in the field of aggregative architecture, discrete material assemblies, combinatorial ontologies and their possible up-scaling and implications on urban design. It argues that the digital definition of being discrete is not compatible with earlier, semantic definitions and their connotations on larger scales. Comparable to the breakthroughs in additive assembly by the use of discrete computation this paper demonstrates that the upscaling of discrete notions leads to considerations on the nesting and grouping of parts, here referred to as mereology. Via the means of an exemplary study it introduces the vocabulary of mereology and shows how complex compositions can be articulated with a collection of part-to-whole relations.
keywords	mereology; discrete automata ; aggregative architecture; part-to-whole relations; urban design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2017_087
id	ecaade2017_087
authors	Marijnissen, Marjolein P.A.M. and van der Zee, Aant
year	2017
title	3D Concrete Printing in Architecture - A research on the potential benefits of 3D Concrete Printing in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.2.299
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 299-308
summary	This research explores the use of large-scale 3D Printing techniques in architecture and structural design. First we will analyse the various methods in large-scale 3D printing in order to choose the method with the most potential to be used to build large-scale residential buildings in the Netherlands. Then we will investigate the properties of this 3D printing technique to determine the new building process, related to building with a 3D Concrete Printer. The freedom in movement of the printer and the properties of the concrete mixture used to print will form the guidelines in the creation of a design language in which both material costs and labour costs are reduced to a minimum. The design language is later applied on the design of a house, which shows the impact 3D Concrete Printing should have on the current boundaries in architecture and structural design.
keywords	Additive Manufacturing; 3D Concrete Printing; Structural Optimization; Personalization
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_105
id	ecaade2017_105
authors	Miodragovic Vella, Irina and Kotnik, Toni
year	2017
title	Stereotomy, an Early Example of a Material System
doi	https://doi.org/10.52842/conf.ecaade.2017.2.251
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 251-258
summary	Stereotomy originated as a technique that accumulated theoretical and practical knowledge on stone material properties and construction. At its peak in the nineteenth century, by pushing the structure and construction limits, it gained the ability of using "the weight of the stone against itself by making it hover in space through the very weight that should make it fall down" (Perrault 1964, cited Etelin, 2012). The modern architectural tectonics, based on structural comprehension in architecture, found no value in stereotomy beyond its early, Gothic period. Similarly, digital architectural theory recognized in Gothic the early examples of a material systems. This paper reassesses stereotomy at its fundamental levels, as a material system based on generative processes that assimilate structure and construction through parameterization. In this way, a theoretical framework is established that exposes stereotomy's intrinsic potentials: the continuity of historic and contemporary examples, overlaps between current research endeavours, and its genuine relevance for contemporary digital architecture.
keywords	stereotomy, material system, Abeille vault, parametric design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2017_108
id	ecaade2017_108
authors	Miodragovic Vella, Irina and Kotnik, Toni
year	2017
title	Contemporary Stereotomic Trait, an Opportunity for the Development of the Volumetric Digital Architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.1.739
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 739-746
summary	Stereotomy is generally known in architecture as a stone carving technique for the purpose of constructing masonry assemblies. A deeper analysis reveals stereotomic design processes' ability to resolve multiple structure and construction constrains, derived as underlying geometries and their relationships, into architectural volumetric complexities. The paper argues that the trait, stereotomic geometric negotiations platform, re-examined in a contemporary context, lends itself as a theoretical model for the current digital architecture's pursuits of multiple constraints assimilations within design processes and their physical reflection in formal complexities.
keywords	stereotomy, trait, digital architecture, digital design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2017_054
id	ecaade2017_054
authors	Abramovic, Vasilija, Glynn, Ruairi and Achten, Henri
year	2017
title	ROAMNITURE - Multi-Stable Soft Robotic Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.1.327
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 327-336
summary	The rise in robotics is not only changing fabrication research in architecture but increasingly providing opportunities for animating the materiality of architecture, offering responsive, performative and adaptive design possibilities for the built environment. A fundamental challenge with robotics is its suitability to safe, and comfortable use in proximity to the human body. Here we present the preliminary results of the Roamniture Project, a hybrid approach to developing kinetic architecture based on a combination of rigid and soft body dynamics.
keywords	Kinetic Architecture; Soft Robotics; Soft Architecture; Furniture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_085
id	ecaade2017_085
authors	Agustí-Juan, Isolda, Hollberg, Alexander and Habert, Guillaume
year	2017
title	Integration of environmental criteria in early stages of digital fabrication
doi	https://doi.org/10.52842/conf.ecaade.2017.2.185
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 185-192
summary	The construction sector is responsible for a big share of the global energy, resource demand and greenhouse gas emissions. As such, buildings and their designers are key players for carbon mitigation actions. Current research in digital fabrication is beginning to reveal its potential to improve the sustainability of the construction sector. To evaluate the environmental performance of buildings, life cycle assessment (LCA) is commonly employed. Recent research developments have successfully linked LCA to CAD and BIM tools for a faster evaluation of environmental impacts. However, these are only partially applicable to digital fabrication, because of differences in the design process. In contrast to conventional construction, in digital fabrication the geometry is the consequence of the definition of functional, structural and fabrication parameters during design. Therefore, this paper presents an LCA-based method for design-integrated environmental assessment of digitally fabricated building elements. The method is divided into four levels of detail following the degree of available information during the design process. Finally, the method is applied to the case study "Mesh Mould", a digitally fabricated complex concrete wall that does not require any formwork. The results prove the applicability of the method and highlight the environmental benefits digital fabrication can provide.
keywords	Digital fabrication; Parametric LCA; Early design; Sustainability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_057
id	ecaade2017_057
authors	Al-Qattan, Emad, Yan, Wei and Galanter, Philip
year	2017
title	Tangible Computing for Establishing Generative Algorithms - A Case Study with Cellular Automata
doi	https://doi.org/10.52842/conf.ecaade.2017.1.347
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 347-354
summary	The work presented in this paper investigates the potential of tangible interaction to setup algorithmic rules for creating computational models. The research proposes a workflow that allows designers to create complex geometric patterns through their physical interaction with design objects. The method aims to address the challenges of designers implementing algorithms for computational modeling. The experiments included in this work are prototype-based, which link a digital environment with an artifact - the physical representation of a digital model that is integrated with a Physical Computing System. The digital-physical workflow is tested through enabling users to physically setup the rules of a Cellular Automata algorithm. The experiments demonstrate the possibility of utilizing tangible interaction to setup the initial cell state and the rules of a CA algorithm to generate complex geometric patterns.
keywords	Physical Computing; Tangible User-Interface; Cellular Automata
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_240
id	ecaade2017_240
authors	Al-Sudani, Amer, Hussein, Hussein and Sharples, Steve
year	2017
title	Sky View Factor Calculation - A computational-geometrical approach
doi	https://doi.org/10.52842/conf.ecaade.2017.2.673
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 673-682
summary	Sky view factor (SVF) is a well-known parameter in urban-climatic studies, but there is a lack of consensus on its effectiveness, especially with regard to the interpretation of changes in urban air temperatures. This led the authors to develop the new concept of the partial sky view factor (SVFp), which showed promise in a previous study. The objective of this study is to save the time associated with manual methods of calculating SVF and SVFp by developing a Rhino-Grasshopper component to quantify them via the hemispheric projection of a 3D model. In addition, a different approach, in terms of a hemispheric projection to calculate SVF, will be introduced by another component, and the pros and cons of each approach are considered. We will name these methods 'Ray Method' and 'Geometrical Method' respectively. The Ray Method has achieved a good balance between accuracy, processing time and urban scale and complexity compared to the Geometrical Method.
keywords	Sky view factor; parametric design; Rhino - Grasshopper; urban morphology; partial Sky view factor
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_175
id	ecaade2017_175
authors	Alfaiate, Pedro and Leit?o, António
year	2017
title	Luna Moth - A Web-based Programming Environment for Generative Design
doi	https://doi.org/10.52842/conf.ecaade.2017.2.511
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 511-518
summary	Current Generative Design (GD) tools require installation and regular updates. On top of that, programs that are created using them are stored as files, which have to be moved and shared manually with others. On the other hand, web applications are accessible using just a web browser and they can also store information remotely, meaning that it does not need to be moved and is easily shared with others. Consequently, GD tools should also be available as web applications to get the same functionality. We present Luna Moth, an IDE for GD available from the web that shows the relationship between a program and its results and integrates into the architect's workflow. Then, we give examples where Luna Moth's features help the architect during the programming process. Finally, we compare Luna Moth's performance with other IDEs, namely, Grasshopper, OpenJSCAD, and Rosetta.
keywords	Generative Design; Web application; Design tool integration;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_133
id	ecaade2017_133
authors	Ashrafi, Negar and Duarte, José Pinto
year	2017
title	A shape-grammar for double skin facades - A basis for generating context sensitive facades solution
doi	https://doi.org/10.52842/conf.ecaade.2017.2.471
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 471-476
summary	Double skin façade (DSF) is considered one of the best envelope systems in terms of energy efficiency. However, designing an energy efficient DSF system depends on different factors, such as climate, DSF shape and how the air flows in that system. This study presents a methodology to assist design decisions regarding the DSFs shapes. For this purpose, shape grammars was used as a generative design system to generate alternative DSF shape designs. Results of this study can be integrated with an energy simulation tools to calculate the energy demand of each design and consequently design the most efficient DSF system for each context.
keywords	building envelope design; double skin façade; generative design system; shape grammars
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: