Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 573

Reformat results as: short short into frame detailed detailed into frame

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
doi	https://doi.org/10.52842/conf.caadria.2017.467
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2017_419
id	cf2017_419
authors	Dickey, Rachel
year	2017
title	Soft Computing in Design: Developing Automation Strategies from Material Indeterminacies
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 419-430.
summary	Integrating concepts of soft computation into advanced manufacturing and architecture means perceiving the element of chance not as a hindrance, but as an opportunity. The projects examined in this manuscript explore opportunities for integrating material indeterminacy into advanced manufacturing by pairing a certain degree material unpredictability with the rigid order of machine control. The three projects described investigate three common categories of automated tooling including additive processes, subtractive processes and molding / casting processes. Each project begins with the question, what opportunities might arise from the mediation between material volition and computational control? By embracing indeterminate material results and taking an optimistic stance on chance and uncertainty, which are usually treated as problems rather than values, the intent is to provide ways for automating unique material effects and explore the opportunities for integrating soft computing in design.
keywords	Robotics, 3d Printing, Digital Fabrication, Automation, Indeterminacy
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2017_069
id	caadria2017_069
authors	Dritsas, Stylianos, Chen, Lujie and Sass, Lawrence
year	2017
title	Small 3D Printers / Large Scale Artifacts - Computation for Automated Spatial Lattice Design-to-Fabrication with Low Cost Linear Elements and 3D Printed Nodes
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 821-830
doi	https://doi.org/10.52842/conf.caadria.2017.821
summary	The presented process enables users to design, fabricate and assemble spatial lattices comprised of linear stock materials such as round section timber, aluminum or acrylic dowels and complex 3D printed joints. The motivation for the development of this application is informed by the incredible availability of low cost 3D printers which enable anyone to produce small scale artifacts; deploying rapid prototyping to achieve larger scale artifacts than the machine's effective work envelope is a challenge for additive manufacturing; and the trend in the design computing world away highly technical specialized software towards general public applications.
keywords	Design Computation; Digital Fabrication; 3D Printing; Spatial Lattices; Design to Production
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2017_002
id	caadria2017_002
authors	Haeusler, M. Hank, Muehlbauer, Manuel, Bohnenberger, Sascha and Burry, Jane
year	2017
title	Furniture Design Using Custom-Optimised Structural Nodes
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 841-850
doi	https://doi.org/10.52842/conf.caadria.2017.841
summary	Additive manufacturing techniques and materials have evolved rapidly during the last decade. Applications in architecture, engineering and construction are getting more attention as 3D printing is trying to find its place in the industry. Due to high material prices for metal 3d printing and in-homogenous material behaviour in printed plastic, 3D printing has not yet had a very significant impact at the scale of buildings. Limitations on scale, cost, and structural performance have also hindered the advancement of the technology and research up to this point. The research presented here takes a case study for the application of 3D printing at a furniture scale based on a novel custom optimisation approach for structural nodes. Through the concentration of non-standard geometry on the highly complex custom optimised nodes, 3D printers at industrial product scale could be used for the additive manufacture of the structural nodes. This research presents a design strategy with a digital process chain using parametric modeling, virtual prototyping, structural simulation, custom optimisation and additive CAD/CAM for a digital workflow from design to production. Consequently, the digital process chain for the development of structural nodes was closed in a holistic manner at a suitable scale.
keywords	Digital fabrication; node optimisation; structural performance; 3D printing; carbon fibre.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2017_013
id	ecaade2017_013
authors	Junk, Stefan and Gawron, Philipp
year	2017
title	Development of parametric CAAD models for the additive manufacturing of scalable architectural models
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 419-426
doi	https://doi.org/10.52842/conf.ecaade.2017.1.419
summary	Architecture models are an essential component of the development process and enable a physical representation of virtual designs. In addition to the conventional methods of model production using the machining of models made of wood, metal, plastic or glass, a number of additive manufacturing processes are now available. These new processes enable the additive manufacturing of architectural models directly from CAAD or BIM data. However, the boundary conditions applicable to the ability to manufacture models with additive manufacturing processes must also be considered. Such conditions include the minimum wall thickness, which depends on the applied additive manufacturing process and the materials used. Moreover, the need for the removal of support structures after the additive manufacturing process must also be considered. In general, a change in the scale of these models is only possible at very high effort. In order to allow these restrictions to be adequately incorporated into the CAAD model, this contribution develops a parametrized CAAD model that allows such boundary conditions to be modified and adapted while complying with the scale. Usability of this new method is illustrated and explained in detail in a case study. In addition, this article addresses the additive manufacturing processes including subsequent post-processing.
keywords	Digital manufacturing; Parametric design; Architectural model
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2020_184
id	ecaade2020_184
authors	Kycia, Agata and Guiducci, Lorenzo
year	2020
title	Self-shaping Textiles - A material platform for digitally designed, material-informed surface elements
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2020.2.021
summary	Despite the cutting edge developments in science and technology, architecture to a large extent still tends to favor form over matter by forcing materials into predefined, often superficial geometries, with functional aspects relegated to materials or energy demanding mechanized systems. Biomaterials research has instead shown a variety of physical architectures in which form and matter are intimately related (Fratzl, Weinkamer, 2007). We take inspiration from the morphogenetic processes taking place in plants' leaves (Sharon et al., 2007), where intricate three-dimensional surfaces originate from in-plane growth distributions, and propose the use of 3D printing on pre-stretched textiles (Tibbits, 2017) as an alternative, material-based, form-finding technique. We 3D print open fiber bundles, analyze the resulting wrinkling phenomenon and use it as a design strategy for creating three-dimensional textile surfaces. As additive manufacturing becomes more and more affordable, materials more intelligent and robust, the proposed form-finding technique has a lot of potential for designing efficient textile structures with optimized structural performance and minimal usage of material.
keywords	self-shaping textiles; material form-finding; wrinkling; surface instabilities; bio-inspired design; leaf morphogenesis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2017_059
id	sigradi2017_059
authors	Naboni, Roberto; Anja Kunic
year	2017
title	Design and Additive Manufacturing of Lattice-based Cellular Solids at Building Scale
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.404-410
summary	The amounts of material that is being extracted, harvested and consumed in the last decades is increasing tremendously and bringing to the serious problem of resource scarcity. As a direct consequence to this claim, designers are challenged to rethink architecture and develop new ways of confronting with materials. A potential answer to this problem is the exploration of computational logics for architectural design and fabrication inspired by the observation of biological formations. This work explores how the biological model of bone microstructure can be applied to a larger scale architecture that is structurally responsive, by means of computational design and Additive Manufacturing.
keywords	Functionally Graded Trabecular Tectonics, Digital fabrication, Additive Manufacturing, Computational Design, Biomimetics
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	acadia17_502
id	acadia17_502
authors	Rosenwasser, David; Mantell, Sonya; Sabin, Jenny
year	2017
title	Clay Non-Wovens: Robotic Fabrication and Digital Ceramics
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 502- 511
doi	https://doi.org/10.52842/conf.acadia.2017.502
summary	Clay Non-Wovens develops a new approach for robotic fabrication, applying traditional craft methods and materials to a fundamentally technical and precise fabrication methodology. This paper includes new explorations in robotic fabrication, additive manufacturing, complex patterning, and techniques bound in the arts and crafts. Clay Non-Wovens seeks to develop a system of porous cladding panels that negotiate circumstances of natural daylighting through parameters dealing with textile (woven and non-woven) patterning and line typologies. While additive manufacturing has been built predominantly on the basis of extrusion, technological developments in the field of 3D printing seldom acknowledge the bead or line of such extrusions as more than a nuisance. Blurring of recognizable layers is often seen as progress, but it does away with visible traces of a fabrication process. Historically, however, construction methods in architecture and the building industry have celebrated traces of making ranging from stone cutting to log construction. With growing interest in digital craft within the fields of architecture and design, we seek to reconcile our relationship with the extruded bead and reinterpret it as a fiber and three-dimensional drawing tool. The traditional clay coil is to be reconsidered as a structural fiber rather than a tool for solid construction. Building upon this body of robotically fabricated clay structures required the development of three distinct but connected techniques: 1. construction of a simple end effector for extrusion; 2. development of a clay body and; 3. using computational design tools to develop formwork and toolpath geometries.
keywords	design methods; information processing; fabrication; digital craft; manual craft; prototyping
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia17_660
id	acadia17_660
authors	Zivkovic, Sasa; Battaglia, Christopher
year	2017
title	Open Source Factory: Democratizing Large-Scale Fabrication Systems
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 660- 669
doi	https://doi.org/10.52842/conf.acadia.2017.660
summary	Open source frameworks have enabled widespread access to desktop-scale additive manufacturing technology and software, but very few highly hackable large-scale or industrial open source equipment platforms exist. As research trajectories continue to move towards large-scale experimentation and full-scale building construction in robotic and digital fabrication, access to industrial fabrication equipment is critical. Large-scale digital fabrication equipment usually requires extensive start-up investments which becomes a prohibitive factor for open research. Expanding on the idea of the Fab Lab as well as the RepRap movement, the Open Source Factory takes advantage of disciplinary expertise and trans-disciplinary knowledge in construction machine design accumulated over the past decade. With the goal to democratize access to large-scale industrial fabrication equipment, this paper outlines the creation of two full-scale fabrication systems: a RepRap based large-scale 3-axis open source CNC gantry and a 6-axis industrial robot system based on a decommissioned KUKA KR200/2. Both machines offer radically different economic frameworks for implementing research in advanced full scale robotic fabrication into contexts of pedagogy, the research lab, practice, or small scale local building industry. This research demonstrates that such equipment can be implemented by building on the current knowledge base in the field. If industrial robots and other large-scale fabrication tools become accessible for all, the collective sharing of research and the development of new ideas in full-scale robotic building construction can be substantially accelerated.
keywords	education, society & culture; CAM; prototyping; construction/robotics; education; digital heritage
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ecaade2017_155
id	ecaade2017_155
authors	Beir?o, José Nuno and de Klerk, Rui
year	2017
title	CIM-St - A Design Grammar for Street Cross Sections
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 619-628
doi	https://doi.org/10.52842/conf.ecaade.2017.2.619
summary	The design of streets plays an essential role in shaping the quality of our cities. In particular, the design of a street's cross section determines in many aspects the realm of its use, enhancing or reducing its ability for being walkable streets or traffic oriented streets. This paper shows a street cross section design interface where designs are controlled by an ontology and a parametric design system supported by a shape grammar. The ontology provides a semantically ordered vocabulary of shapes, symbols and descriptions upon which the grammar is defined. This paper focuses on the grammar definitions and its translation into a design oriented interface.
keywords	Parametric Design; Ontologies; Compound Grammars; Street Cross Section; Urban Design Systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2017_049
id	sigradi2017_049
authors	Braida, Frederico; Cheyenne Azevedo, Izabela Ferreira, Janaina Castro, Janaina Castro
year	2017
title	Projetando com blocos de montar: Residências mínimas no contexto da cidade contemporânea [Design with building blocks: Compact homes in the context of the contemporary city]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.335-343
summary	This paper presents the results of the creation of a game, composed of building blocks, conceived as didactic material for the minimum residences design. The game was designed to be produced by rapid prototyping and digital manufacturing resources. Methodologically, the research was based on both a literature review and an empirical research on the use of a set of building blocks. The text shows the critical analysis and reflections on the results achieved with a workshop entitled "Designing compact homes with building blocks".
keywords	Building blocks; Rapid prototyping; Digital fabrication; Education; Architecture.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia17_164
id	acadia17_164
authors	Brugnaro, Giulio; Hanna, Sean
year	2017
title	Adaptive Robotic Training Methods for Subtractive Manufacturing
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 164-169
doi	https://doi.org/10.52842/conf.acadia.2017.164
summary	This paper presents the initial developments of a method to train an adaptive robotic system for subtractive manufacturing with timber, based on sensor feedback, machine-learning procedures and material explorations. The methods were evaluated in a series of tests where the trained networks were successfully used to predict fabrication parameters for simple cutting operations with chisels and gouges. The results suggest potential benefits for non-standard fabrication methods and a more effective use of material affordances.
keywords	design methods; information processing; construction; robotics; ai & machine learning; digital craft; manual craft
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2017_037
id	sigradi2017_037
authors	Cenci, Laline; Rodreigo Garcia Alvarado
year	2017
title	Modelado paramétrico y fabricación digital para la concepción de edificios de museo ambientalmente adecuados para el clima subtropical húmedo de Brasil. [Parametric modeling and digital manufacturing for the conception of museum buildings environmentally suitable for the subtropical wetland climate of Brazil.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.257-261
summary	Museums exhibit a growing development in the world, promoting buildings with significant expressions. Nevertheless, the relation of the building and its environmental performance is fundamental in the conception of new buildings. The problem originates in the early stages of design, where it is not possible to evaluate it environmentally. The methodology uses three art museum buildings in the humid subtropical climate of Brazil, whose geometries are completely different. After analyzing and relating its performance to its environmental and geometric characteristics a parametric modeling tool is proposed and the digital manufacture as a product of the process has been carried out.
keywords	Parametric Modeling; Digital Manufacturing; Art museums; Environmental Compatibility; Subtropical Humid Climate of Brazil.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2017_122
id	caadria2017_122
authors	Chen, Zi-Ru and Liang, Kai-Hsiang
year	2017
title	Application of Digital Fabrication Techniques to Reconstruct Ancient Machinery - A Case-study of Su Song's Water-powered Astronomical Clock Tower
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 777-786
doi	https://doi.org/10.52842/conf.caadria.2017.777
summary	The restoration of ancient machinery involves a number of aspects, including manufacturing procedure, materials, and scales. Portions that cannot be confirmed should be regarded as variable parameters of the reconstructed design, and therefore, there is no single result. The goal of reconstruction is to establish a prototype of ancient machinery with its mechanical engineering techniques and crafts. The problem of this study is how digital fabrication tools used in architectural design can be applied to the reconstruction of ancient machinery with the water-powered armillary and celestial tower as an example. The objective was to synthesize results that comply with historical records in a systematic, modularized, and parameterized manner and consider the feasibility of using modern digital fabrication and materials. With the procedure, we can reduce the difficulty of ancient machinery reconstruction and provide a reference for the reconstruction designs of ancient mechanical technology and crafts, and mass production made of different materials and scales in the future.
keywords	Digital fabrication; Ancient mechanisms recovery; Innovative design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia17_190
id	acadia17_190
authors	Coleman, James; Cole, Shannon
year	2017
title	By Any Means Necessary: Digitally Fabricating Architecture at Scale
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 190-201
doi	https://doi.org/10.52842/conf.acadia.2017.190
summary	Architectural manufacturing is a balancing act between production facility and a custom fabrication shop. Each project Zahner takes on is different from the last, and not likely to repeat. This means that workflows are designed and deployed for each project individually. We present Flash Manufacturing, a fabrication methodology we employ in the production of architectural elements for cutting-edge and computationally sophisticated buildings. By remixing manufacturing techniques and production spaces we are able to meet the novel challenges posed by fabricating and assembling hundreds of thousands of unique parts. We discuss methods for producing vastly different project types and highlight two building case studies: the Cornell Tech Bloomberg Center and the Petersen Automotive Museum. With this work, we demonstrate how design creativity is no longer at odds with reliable and cost-effective building practices. Zahner has produced hundreds of seminal buildings working with architects such as: Gehry Partners, Zaha Hadid, m0rphosis, Herzog & de Meuron, OMA, Steven Holl Architects, Studio Daniel Libeskind, Rafael Moneo, DS+R, Foster + Partners, Gensler, KPF, SANAA and many more. This paper disrupts conventional discourse surrounding manufacturing/construction methods by discussing the realities of mass customization—how glossy architectural products are forged through ad hoc inventive engineering and risk tolerance.
keywords	material and construction; fabrication; CAM; prototyping; construction; robotics
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_050
id	ecaade2017_050
authors	Cursi, Stefano, Simeone, Davide and Coraglia, Ugo Maria
year	2017
title	An ontology-based platform for BIM semantic enrichment
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 649-656
doi	https://doi.org/10.52842/conf.ecaade.2017.2.649
summary	In its application to design phases, BIM has progressively shown limits in terms of semantic representation and efficiency of supporting collaboration. This paper investigates the possibilities related to BIM representation enrichment through semantic web approaches, in order to represent knowledge rather than information and presents a prototypal application oriented to the integration of the informative model of the building with a knowledge base developed by means of ontologies, providing a more structured system of interconnected information.
keywords	BIM; Semantic enrichment; Knowledge Management; Ontologies
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf2017_112
id	cf2017_112
authors	de Klerk, Rui; Beirao, Jose Nuno
year	2017
title	CIM-St: A Parametric Design System for Street Cross Sections
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 112.
summary	City environment is very much determined by the design of its streets and in particular by the design of its cross section. This paper shows a street cross section design interface where designs are controlled by an ontology and a parametric design system. The system keeps its semantic structure through the ontology and provides a design interface that understands the computer interaction needed by the urban designer. Real time visual analytics are used to support the design decision process, allowing designers to objectively compare designs and measure the differences between them, in order to make informed decisions.
keywords	Parametric design, Ontologies, Compound grammars, Street cross section, Urban design systems
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	acadia17_212
id	acadia17_212
authors	De Luca, Francesco
year	2017
title	Solar Form Finding: Subtractive Solar Envelope and Integrated Solar Collection Computational Method for High-Rise Buildings in Urban Environments
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 212-221
doi	https://doi.org/10.52842/conf.acadia.2017.212
summary	Daylight standards contribute significantly to the form of buildings and the urban environment. Direct solar access of existing and new buildings can be considered through the use of solar envelope and solar collection isosurface methods. The first determines the maximum volume and shape that new buildings cannot exceed to guarantee the required solar rights on existing surrounding facades. The latter predicts the portion of facades of new buildings that will receive the required direct sunlight hours in urban environments. Nowadays, environmental design software based on the existing methods permits the generation of solar envelopes and solar collection isosurfaces to use in the schematic design phase. Nevertheless, the existing methods and software present significant limitations when used to design buildings that must fulfil the Estonian daylight standard. Recent research has successfully developed computational workflows based on the existing methods and available tools to tackle such shortcomings. The present work uses the findings to propose a novel computational method to generate solar envelopes and integrate solar collection analysis. It is a subtractive form-finding method that is more efficient than the existing additive methods and other recent workflows when it is applied to high-rise buildings in fragmented urban environments. The tests performed show that the new method permits the realisation of compliant and larger solar envelopes, which furthermore embed formal properties. The objective of the research is to contribute to the development of computational methods and tools to integrate direct solar access performance efficiently into the design process.
keywords	design methods; information processing; simulation & optimization; form finding
series	ACADIA
email
last changed	2022/06/07 07:55

_id	caadria2017_149
id	caadria2017_149
authors	Dickey, Rachel
year	2017
title	Soft Systems - Rethinking Indeterminacy in Architecture as Opportunity Driven Research
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 811-820
doi	https://doi.org/10.52842/conf.caadria.2017.811
summary	The research projects in this paper examine the notion of soft systems relative to machine induced material consequences. It asks, how might we integrate processes and methods which leave tolerances for indeterminacy and flexibility into design and construction? The two projects outlined investigate change of state materials paired with automation strategies, focusing on additive processes with thermally induced material configurations and programmable matter with magnetically controlled formations.
keywords	robotics; 3d printing; digital fabrication; automation; indeterminacy
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: