Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ijac201715101
id	ijac201715101
authors	Bieg, Kory and Clay Odom
year	2017
title	Lumifoil and Tschumi: Virtual projections and architectural interventions
source	International Journal of Architectural Computing vol. 15 - no. 1, 6-17
summary	This article introduces the theoretical and technical framework for the design of a temporary rooftop canopy on the red generator—one of the buildings designed by Bernard Tschumi for the Florida International University School of Architecture. The project, Lumifoil, was designed using both top-down and bottom-up computational techniques, including surface modeling via projected geometries and scripted cellular subdivisions and assemblies. Lumifoil attempts to synthesize these two often-conflicting design approaches into a generative design process which leverages context, form, surface, and structure as affective and effective actors. Lumifoil is the result of a design methodology which is both active and reactive to existing conditions of the site and new opportunities afforded by the program. It is contextual in its top-down relationship to Tschumi’s existing building and theory, generative in how details emerge bottom-up through scripts which lack any reference to site, and emergent in the resulting synthetic processes and effects which are produced. Through this methodological development, the project both tracks and responds to popular architectural theory and design from the mid-1990s to today. The theoretical underpinnings of the project build upon the idea that the actual (the real-life physical manifestation of matter) and the virtual (the potential for an object to be) are two constantly shifting paradigms in which design processes can intervene to help develop an architectural solution from a range of possibilities. The technical aspect of the project includes the collaborative workflow between the architecture offices of OTA+ and studio MODO with Arup Engineers to resolve structural issues using parametric modeling tools and structural analysis software. The final project is entirely parametric and fabrication is completely automated.
keywords	Tschumi, Parametric, Installation, Generative, Projection
series	other
type	normal paper
email
last changed	2019/08/02 08:16

_id	acadia19_90
id	acadia19_90
authors	Forward, Kristen; Taron, Joshua
year	2019
title	Waste Ornament
doi	https://doi.org/10.52842/conf.acadia.2019.090
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 90-99
summary	The emergence of computational design and fabrication tools has escalated the potentials of architectural ornamentation to become innovative, beautiful, and highly sustainable. Historically, ornament has been known to express character and reveal relationships between materiality, technological advances, and societal evolution. But ornament rapidly declined in the late 1800s in large part due to mechanization and modernist ideals of uniform, unadorned façade components. However, ornamentation in architecture has recently reappeared—a development that can be linked closely to advancements in computational design and digital fabrication. While these advancements offer the ability to create expressive architecture, their potential contribution to the improvement of sustainable architecture has largely been overlooked (Augusti-Juan and Habert 2017). This paper provides a brief revisitation to the history of ornament and investigates the impact of computation and automation on the production of contemporary ornament. The paper also attempts to catalog examples of how designers have used computational technologies to address the growing criticality of environmental concerns. Moreover, the paper presents the Waste Ornament project, a research platform that critically examines how we can leverage technology to augment the visual and sustainable performance of facade ornamentation to reduce energy use in buildings. Three sub-projects are identified as territories for further research into sustainable ornamentation, ranging from material sourcing, to high-performance buildings, to the development of a systematic upcycling process that transforms old facades into new ones. While the examples are not exhaustive, they attempt to interlace the general ideas of waste and ornament by addressing particular issues that converge at building envelopes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	cf2017_297
id	cf2017_297
authors	He, Yi; Schnabel, Marc Aurel; Chen, Rong; Wang, Ning
year	2017
title	A Comprehensive Application of BIM Modelling for Semi-underground Public Architecture: A Study for Tiantian Square Complex, Wuhan, China
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 297-308.
summary	The paper presents research on how Building Information Modelling (BIM) can be applied comprehensively throughout the design of an architectural project. A practical method based on BIM models that help to deal with multidisciplinary issues by integrating the design information from different sources, collaborators and project stages is formulated by adopting existing available tools. The ‘Tiantian Square’ building project in Wuhan, China combines a subway station with a commercial hug. According to the project’s size and complexity, our study focuses on the multiple cooperation of professionals from different backgrounds, including the departments of architectural design, structure (civil engineering), HVAC (Heating, Ventilation and Air Conditioning), water supply and drainage, and electrics and sustainable design. Our paper presents how the BIM model bridges between various simulation platforms through our technical system and management, including steps of transformation, simplification, analysis, reaction and improvement. Our research has helped to improve the overall efficiency and quality of the project. We generated a successful analysis-design approach for the initial design stages, which does not require in-depth analysis. It is a practical method to immediately evaluate the performance for each design alternative and provide guidelines for design modification. Finally, we discuss how the coordination of different department becomes a crucial factor as we look forward to a more open, communicative and inter-relational design and development process.
keywords	BIM, Subway Complex, Simulation, Semi-Underground Architecture
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2017_183
id	caadria2017_183
authors	Holzer, Dominik
year	2017
title	Optimising Human Comfort in Medium-density Housing via Daylight and Wind Simulation
doi	https://doi.org/10.52842/conf.caadria.2017.273
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 273-282
summary	This paper explores the pedagogical context for the inclusion of daylight and wind simulation as part of architectural design-studio teaching. The author describes both challenges as well as opportunities encountered by architecture students who applied high-end technology for optimizing environmental conditions during the conceptual design of a residential project within a thirteen week studio. Students located their projects in an inner urban context in a 'Temperate' climate zone, meaning that they had to account for hot conditions in summer while considering wind-chill factors in winter. Based on the studio experience, the paper scrutinizes how students tackled Computational Fluid Dynamics (CFD) and daylight analysis on different scales of their project. The paper explores how the engagement with latest tools available to architecture students changes their ability to discuss building physics with engineers and question precedence typology. The author describes the pedagogical challenges when helping architecture students to overcome obstacles in communicating engineering aspects inherent to the design process.
keywords	Environmental Analysis; CFD; Daylight Simulation; Design Pedagogy; Parametric Design
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2017_180
id	cf2017_180
authors	Jun, Ji Won; Silverio, Matteo; Llubia, Josep Alcover; Markopoulou, Areti; Chronis; Angelos; Dubor, Alexandre
year	2017
title	Remembrane: A Shape Changing Adaptive Structure
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 180-198.
summary	This paper presents a research on adaptive kinetic structures using shape memory alloys as actuators. The target of the research is designing and building an efficient kinetic structural system that could be potentially applied at an architectural scale. The project is based on the study of tensegrity and pantograph structures as a starting point to develop multiple digital and physical models of different structural systems that can be controllably moved. The result of this design process is a performative prototype that is controllable through a web-based interface. The main contribution of this project is not any of the presented parts by themselves but the integration of all of them in the creation of a new adaptive system that allows us to envision a novel way of designing, building and experiencing architecture in a dynamic and efficient way.
keywords	Responsive Structures, Kinetic Structures, Adaptive Systems, User Interaction, Structural Optimization
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	cf2017_360
id	cf2017_360
authors	Ofluo?lu, Salih
year	2017
title	BIM-based Interdisciplinary Collaborations in a Student Project Competition
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 360-373.
summary	Architecture is a profession that requires collaboration among professionals from various fields. Despite the important nature of these interdisciplinary collaborations, architecture students rarely obtain the opportunity to learn about the work areas of other stakeholders and the practice of working together. In all sectors there is a growing need for professionals who possess in-depth knowledge in their own disciplines and also develop an understanding about other related disciplines. In a setting of a student project competition, this article examines how students from various AEC fields collaborate using BIM as a common data environment and emphasizes several considerations for implementing interdisciplinary collaborations in curriculums of architecture schools in students’ perspective.
keywords	Interdisciplinary Collaborations, Architectural Design Studio, BIM, Building Information Modeling
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	cf2017_211
id	cf2017_211
authors	Güzelci, Orkan Zeynel
year	2017
title	Investigating the role of Entropy in Design Evaluation Process: A Case Study on Municipality Buildings
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 211-224.
summary	The concept of entropy, which can be used to measure physical disorder, has been rediscovered by Shannon to measure the irregularity in information. Entropy measurements are made by considering one or more factors. Specific features such as color, shape, element type, height, material related with architectural compositions can be considered as factors and the amount of information carried by the building depending on one or more of these factors can be measured. In this study, it is questioned whether there is a relationship between entropy values of municipal building competition projects, which are measured in relation to the factors, and the building is considered successful by the competition jury. In order to conduct this examination, the entropy values of the projects, which respected to the same architectural program and won various awards in the project competitions were calculated. Before making comparisons, measurements were made according to solid-void ratios on the plan layout, the shapes of closed and discrete spaces, and the distribution of functions. A discussion was made on the usability of entropy method in the design phase, which gave solid and precise results according to the results of the comparisons.
keywords	Entropy, Architectural Competition, Municipality Buildings
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
doi	https://doi.org/10.52842/conf.acadia.2017.028
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_92
id	acadia17_92
authors	Anzalone, Phillip; Bayard, Stephanie; Steenblik, Ralph S.
year	2017
title	Rapidly Deployed and Assembled Tensegrity System: An Augmented Design Approach
doi	https://doi.org/10.52842/conf.acadia.2017.092
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 92-101
summary	The Rapidly Deployable and Assembled Tensegrity (RDAT) project enables the efficient automated design and deployment of differential-geometry tensegrity structures through computation-driven design-to-installation workflow. RDAT employs the integration of parametric and solid-modeling methods with production by streamlining computer numerically controlled manufacturing through novel detailing and production techniques to develop an efficient manufacturing and assembly system. The RDAT project emerges from the Authors' research in academia and professional practice focusing on computationally produced full-scale performative building systems and their innovative uses in the building and construction industry.
keywords	design methods; information processing; AI; machine learning; form finding; VR; AR; mixed reality
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_146
id	acadia17_146
authors	Black, Conor; Forwood, Ed
year	2017
title	Game Engine Computation for Serious Engineering: Visualisation and Analysis of Building Facade Movements as a Consequence of Loads on the Primary Structure
doi	https://doi.org/10.52842/conf.acadia.2017.146
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 146-153
summary	This paper demonstrates the innovative use of game engines as a tool in the analysis and communication of complex structural engineering. It specifically looks at the relationship between a building’s primary structure and its façade. The analysis and visualisations, scripted using the Game Engine Unity3D, focuses on visualising the implications of movements from the primary structure [under various load cases] on the façade. This paper describes the novel process by which Unity3D is utilised to create an applet which imports displacements from structural software and post-processes the data to visualise the complex effect on façade panels according to its support conditions. It demonstrates that visualising facade movements in real-time, as opposed to current, static report-based descriptions, provide access for the comprehension of more complex building systems. This therefore has the possibility to reduce safety factors applied to facade movement joints.
keywords	design methods; information processing; game engines; fabrication; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2017_055
id	caadria2017_055
authors	Caetano, In?s and Leit?o, António
year	2017
title	Integration of an Algorithmic BIM Approach in a Traditional Architecture Studio
doi	https://doi.org/10.52842/conf.caadria.2017.633
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 633-642
summary	Algorithmic BIM combines BIM and Generative Design (GD), merging the potentialities of both approaches. In this paper we describe the design process of a set of parametric facades developed using Algorithmic-BIM, and how this approach was integrated into the design workflow of two architectural studios. We demonstrate how the integration of GD together with BIM influenced the whole design process and also the selection of the final solution. Some of the limitations found during the entire process are also addressed in the paper, such as tight deadlines and financial constraints. Finally, we explain the pros and cons of using this design method compared to a traditional BIM approach, and we discuss the implementation of this paradigm in a traditional design practice. This work was developed using Rosetta, an IDE for Generative Design that supports scripts using different programming languages and allows the generation and edition of 3D models in a variety of CAD and BIM applications. The result of this work is an information model of three parametric facades for a residential building, from which we can extract material quantities and construction performance tests.
keywords	Generative design; collaborative design; CAD-BIM portability; parametric facade design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_407
id	ecaadesigradi2019_407
authors	Capone, Mara, Lanzara, Emanuela, Marsillo, Laura and Nome Silva, Carlos Alejandro
year	2019
title	Responsive complex surfaces manufacturing using origami
doi	https://doi.org/10.52842/conf.ecaade.2019.2.715
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 715-724
summary	Contemporary architecture is considered a dynamic system, capable of adapting to different needs, from environmental to functional ones. The term 'Adaptable Architecture' describes an architecture from which specific components can be changed in relation to external stimuli. This change could be executed by the building system itself, transformed manually or it could be any other ability to be transformed by external forces (Leliveld et al.2017). Adaptability concept is therefore linked to motion and to recent advances in kinetic architecture. In our research we are studying the rules that we can use to design a kinetic architecture using origami. Parametric design allows us to digitally simulate the movement of origami structures, we are testing algorithmic modeling to generate doubly curvature surfaces starting from a designed surface and not from the process. Our main goal is to study the relationship between geometry, motion and shape. We are interested, in particular, in complex surface manufacture using origami technique to design a kinetic and reactive ceiling.
keywords	Origami; complex surface manufacture; responsive architecture; Applied Geometry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaade2017_097
id	ecaade2017_097
authors	Chronis, Angelos, Dubor, Alexandre, Cabay, Edouard and Roudsari, Mostapha Sadeghipour
year	2017
title	Integration of CFD in Computational Design - An evaluation of the current state of the art
doi	https://doi.org/10.52842/conf.ecaade.2017.1.601
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 601-610
summary	The integration of building performance feedback in the design process is increasingly considered as a key aspect of the decision support framework that drives current high performance architecture, from early conception to fabrication. Although on other aspects of building performance there has been significant recent development on BPS integration in computational design, the integration of CFD is still largely unexplored, despite its significance in numerous design problems. This paper reviews the current state of advancement of integrated CFD simulation tools in computational design frameworks by evaluating three different integration approaches, each representing a different level of integration of CFD solvers within the commonly used computational design frameworks today. The objective of the study is neither to provide an extensive evaluation of all available CFD frameworks nor to assess the specific performance of the problem at hand, but rather to evaluate the potential and limitations of each integration approach from the perspective of the computational design user.
keywords	Computational Fluid Dynamics; Simulation; Integration; Computational Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_190
id	acadia17_190
authors	Coleman, James; Cole, Shannon
year	2017
title	By Any Means Necessary: Digitally Fabricating Architecture at Scale
doi	https://doi.org/10.52842/conf.acadia.2017.190
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 190-201
summary	Architectural manufacturing is a balancing act between production facility and a custom fabrication shop. Each project Zahner takes on is different from the last, and not likely to repeat. This means that workflows are designed and deployed for each project individually. We present Flash Manufacturing, a fabrication methodology we employ in the production of architectural elements for cutting-edge and computationally sophisticated buildings. By remixing manufacturing techniques and production spaces we are able to meet the novel challenges posed by fabricating and assembling hundreds of thousands of unique parts. We discuss methods for producing vastly different project types and highlight two building case studies: the Cornell Tech Bloomberg Center and the Petersen Automotive Museum. With this work, we demonstrate how design creativity is no longer at odds with reliable and cost-effective building practices. Zahner has produced hundreds of seminal buildings working with architects such as: Gehry Partners, Zaha Hadid, m0rphosis, Herzog & de Meuron, OMA, Steven Holl Architects, Studio Daniel Libeskind, Rafael Moneo, DS+R, Foster + Partners, Gensler, KPF, SANAA and many more. This paper disrupts conventional discourse surrounding manufacturing/construction methods by discussing the realities of mass customization—how glossy architectural products are forged through ad hoc inventive engineering and risk tolerance.
keywords	material and construction; fabrication; CAM; prototyping; construction; robotics
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_002
id	ecaade2017_002
authors	Costa, Fábio, Eloy, Sara, Sales Dias, Miguel and Lopes, Mariana
year	2017
title	ARch4models - A tool to augment physical scale models
doi	https://doi.org/10.52842/conf.ecaade.2017.1.711
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 711-718
summary	This paper focus on the development and evaluation of a computer tool that enriches physical scale models of buildings, which are commonly used during architecture and civil engineering design processes. The main goal of this work is to enable designers, namely architects, to use the affordances of the physical scale models, by enhancing them with digital characteristics that can be easily changed, allowing an enriched interaction of the designer with such models. Our in-house developed Augmented Reality tool, referred to as ARch4models, augments the user experience with visual features and interactive capabilities, not possible to accomplish with physical models (see this video in https://goo.gl/5zbdTQ). The tool allows the coherent registration between the real and the digital in the same space. Satisfaction evaluation studies were conducted that have shown that ARch4models improves the building design process when compared with a traditional methodology employing solely physical scale models.
keywords	augmented reality; architecture; physical scale model; 3D model; AEC design process
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
doi	https://doi.org/10.52842/conf.caadria.2017.467
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_069
id	ecaade2017_069
authors	D'Uva, Domenico
year	2017
title	Unfolding the design of architecture as a strategy to assess intellectual property - Bridle pirating architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.1.297
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 297-302
summary	Modeling tools are evolving the process of architectural design from the use ordinary digital tool into a role of creator of complex shapes, through coding configurations. These procedures are becoming the structural ground of the architectural shape, going beyond their sole tools role. The increasing in importance of such codes implies a major level of awareness for their use, which is worth of a deeper analysis. The system of relations among parts in an architectural design picks a single configuration among infinite others, because it is produced by a design process which find its fulfillment in the final portray. Through the spreading of digital design tools, such final configuration becomes a step in a clearly reproducible process. The project is achieved through a series of starting conditions, which undergo a parametric process, that produces the final result. An identical parametric process can be applied under slightly different starting conditions and produce completely different results. These results are connected with the code which produced them, but is the authorship still property of the original author?
keywords	Morphogenesis; Parametric; Authorship
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2017_110
id	caadria2017_110
authors	Di Mascio, Danilo
year	2017
title	3D Representations of Cities in Video Games as Designed Outcomes
doi	https://doi.org/10.52842/conf.caadria.2017.033
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 33-42
summary	The following paper proposes a way of reading and systematizing 3d representations of cities in video games. These representations are the result of a complex design problem not solely limited to 3d graphical representations. In fact, every 3d city is a designed artefact, an outcome of a design process that shares many common points with the architectural design process. Four main characteristics of 3d cities in videogames have been identified and described, namely: interaction/gameplay, narrative, architectural and urban representations, and graphical representations. The study of 3d cities in video games can also let us reflect on and improve our real cities. This piece of writing is part of a larger project that intends to investigate aspects of video games that can bring innovative approaches and theories into architecture and related fields. A further aim of the work is to raise interest and awareness on the topic and generate further discussions.
keywords	3d representations; 3d cities; video games; cities in video games; interaction
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:55

For more results click below: