Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 441

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201715102
id	ijac201715102
authors	Klemmt, Christoph and Klaus Bollinger
year	2017
title	Angiogenesis as a model for the generation of load-bearing networks
source	International Journal of Architectural Computing vol. 15 - no. 1, 18-36
summary	This research suggests an algorithm to generate structural networks based on discreet elements for given locations of support points and point loads. Previous research attempted to achieve this by using a computational growth simulation of venation systems, which form the structure of leaves. However, such networks always start from a single point and therefore cannot be used to form arches or beams. In order to generate networks that are based on two or three support points, an algorithm has been developed that is inspired instead by angiogenesis, the process by which vascular systems develop. The algorithm is based on a spring system with a variable network graph that connects the support points and is pulled upwards and split sideways into multiple veins by a given set of load points. The algorithm has been used to grow architectural structures. Different networks have been tested using finite element analysis and compared with both venation and column-and-beam structures. The angiogenesis networks as well as the venation network are shown to perform well and may be suitable as architectural structural systems.
keywords	Architecture, angiogenesis, structure, network, growth
series	other
type	normal paper
email
last changed	2019/08/02 08:25

_id	ecaade2020_184
id	ecaade2020_184
authors	Kycia, Agata and Guiducci, Lorenzo
year	2020
title	Self-shaping Textiles - A material platform for digitally designed, material-informed surface elements
doi	https://doi.org/10.52842/conf.ecaade.2020.2.021
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 21-30
summary	Despite the cutting edge developments in science and technology, architecture to a large extent still tends to favor form over matter by forcing materials into predefined, often superficial geometries, with functional aspects relegated to materials or energy demanding mechanized systems. Biomaterials research has instead shown a variety of physical architectures in which form and matter are intimately related (Fratzl, Weinkamer, 2007). We take inspiration from the morphogenetic processes taking place in plants' leaves (Sharon et al., 2007), where intricate three-dimensional surfaces originate from in-plane growth distributions, and propose the use of 3D printing on pre-stretched textiles (Tibbits, 2017) as an alternative, material-based, form-finding technique. We 3D print open fiber bundles, analyze the resulting wrinkling phenomenon and use it as a design strategy for creating three-dimensional textile surfaces. As additive manufacturing becomes more and more affordable, materials more intelligent and robust, the proposed form-finding technique has a lot of potential for designing efficient textile structures with optimized structural performance and minimal usage of material.
keywords	self-shaping textiles; material form-finding; wrinkling; surface instabilities; bio-inspired design; leaf morphogenesis
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2017_124
id	ecaade2017_124
authors	Pantazis, Evangelos and Gerber, David
year	2017
title	Emergent order through swarm fluctuations - A framework for exploring self-organizing structures using swarm robotics
doi	https://doi.org/10.52842/conf.ecaade.2017.1.075
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 75-84
summary	In modern architecture, construction processes are based on top down planning, yet in nature but also in vernacular architecture, the shape of shelters/nests is the result of evolutionary material processes which takes place without any global coordination or plan. This work presents a framework for exploring how self-organizing structures can be achieved in a bottom up fashion by implementing a swarm of simple robots(bristle bots). The robots are used as a hardware platform and operate in a modular 2D arena filled with differently shaped passive building blocks. The robots push around blocks and their behaviour can be programmed mechanically by changing the geometry of their body. Through physical experimentation and video analysis the relationships between the properties of the emergent patterns (size, temporal stability) and the geometry of the robot/parts are studied. This work couples a set of agent based design tools with a robust robotic system and a set of analysis tools for generating and actualising emergent 2D structures.
keywords	Multi Agent Systems; Generative Design; Swarm Robotics; Self-organizing patterns
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_306
id	ecaade2017_306
authors	Rossi, Michela and Buratti, Giorgio
year	2017
title	Form is Matter - Triply periodic minimal surfaces structures by digital design tools
doi	https://doi.org/10.52842/conf.ecaade.2017.2.259
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 259-268
summary	Architecture and biology teach that the shape affects mechanical behaviour of structures therefore geometry is the basic concept of design, with an ethic responsible and sustainable approach, following the nature's organic model. Industrial design may apply formal properties of elementary shapes and basic design rules to manage the "geometrical behaviour" of new structural surfaces. The research aims to apply digital tools to the design of surface structures that maximise the matter efficiency in the development of "solid fabrics" with parametric controlled geometry.
keywords	Minimal surfaces; Parametric and generative design; Shape and form studies; Digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_302
id	ecaade2017_302
authors	Saleh Tabari, Mohammad Hassan, Kalantari, Saleh and Ahmadi, Nooshin
year	2017
title	Biofilm-inspired Formation of Artificial Adaptive Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.2.303
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 303-312
summary	Todays design researchers are beginning to develop a process-based approach to biomimicry. Instead of merely looking at static natural structures for inspiration, we are learning to draw from the underlying organic processes that lead to the creation of those structures. This paradigm shift points us in the direction of adaptive fabrication systems that can grow through processes of self-assembly and can reconfigure themselves to meet the contours of local environments. In this study we examined the structural growth patterns of bacterial biofilms as a basis for a new kind of artificial, self-assembling module. This demonstration of bio-inspired design shows how contemporary technology allows us to harness the lessons of evolution in new and innovative ways. By exploring the dynamic assembly of complex structural formations in nature, we are able to derive new resource-efficient approaches to adaptable designs that are suited to changing environments. Ultimately we aspire to produce fully synthetic analogues that follow similar patterns of self-assembly to those found in bacterial biofilm colonies. Designers have only just begun to explore the tremendous wealth of natural form-creation processes that can now be replicated with computer-aided design and fabrication; this project shows just one example of what the future might hold.
keywords	Biofilm; Adaptive Structure; Formation; Quorum Sensing; Parametric Condition
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia17_38
id	acadia17_38
authors	Ahlquist, Sean; McGee, Wes; Sharmin, Shahida
year	2017
title	PneumaKnit: Actuated Architectures Through Wale- and Course-Wise Tubular Knit-Constrained Pneumatic Systems
doi	https://doi.org/10.52842/conf.acadia.2017.038
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 38-51
summary	This research explores the development of seamless pneumatically actuated systems whose motion is controlled by the combination of differentially knitted textiles and standardized thin-walled silicone tubing. This work proposes a fundamental material strategy that addresses challenges ranging from soft robotics to pneumatic architecture. Research in soft robotics seeks to achieve complex motions through non-mechanical monolithic systems, comprised of highly articulated shapes molded with a combination of elastic and inelastic materials. Inflatables in architecture focus largely on the active structuring of static forms, as facade systems or as structured envelopes. An emerging use of pneumatic architecture proposes morphable, adaptive systems accomplished through differentiated mechanically interconnected components. In the research described in this paper, a wide array of capabilities in motion and geometric articulation are accomplished through the design of knitted sleeves that generate a series of actuated “elbows.” As opposed to molding silicone bladders, differentiation in motion is generated through the more facile ability of changing stitch structure, and shaping of the knitted textile sleeve, which constrains the standard silicone tubing. The relationship between knit differentiation, pneumatic pressure, and the resultant motion profile is studied initially with individual actuators, and ultimately in propositions for larger seamless assemblies. As opposed to a cellular study of individual components, this research proposes structures with multi-scalar articulation, from fiber and stitch to overall form, composed into seamless, massively deformable architectures.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_92
id	acadia17_92
authors	Anzalone, Phillip; Bayard, Stephanie; Steenblik, Ralph S.
year	2017
title	Rapidly Deployed and Assembled Tensegrity System: An Augmented Design Approach
doi	https://doi.org/10.52842/conf.acadia.2017.092
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 92-101
summary	The Rapidly Deployable and Assembled Tensegrity (RDAT) project enables the efficient automated design and deployment of differential-geometry tensegrity structures through computation-driven design-to-installation workflow. RDAT employs the integration of parametric and solid-modeling methods with production by streamlining computer numerically controlled manufacturing through novel detailing and production techniques to develop an efficient manufacturing and assembly system. The RDAT project emerges from the Authors' research in academia and professional practice focusing on computationally produced full-scale performative building systems and their innovative uses in the building and construction industry.
keywords	design methods; information processing; AI; machine learning; form finding; VR; AR; mixed reality
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2017_115
id	caadria2017_115
authors	Araullo, Rebekah and Haeusler, M. Hank
year	2017
title	Asymmetrical Double-Notch Connection System in Planar Reciprocal Frame Structures
doi	https://doi.org/10.52842/conf.caadria.2017.539
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 539-548
summary	Reciprocal Frame Structures (RF) have broad application potentials. Flexible to using small available materials, they span large areas, including varied curvature and doubly-curved forms. Although not many buildings using RF have been constructed to date, records indicate RF efficiencies where timber was widely used in structures predating modern construction. For reasons of adaptability and economy, advances in computation and fabrication precipitated increase in research into RF structures as a contemporary architectural typology. One can observe that linear timber such as rods and bars feature in extensive RF research. However, interest in planar RF has only recently emerged in research. Hence one can argue that planar RF provides depth to explore new design possibilities. This paper contributes to the growing knowledge of planar RF by presenting a design project that demonstrates an approach in notching systems to explore design and structural performance. The design project, the developed design workflow, fabrication, assembly and evaluation are discussed in this paper.
keywords	Reciprocal Frame Structures; Space Frames; Computational Design; Digital Fabrication; Deployable Architecture
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia17_170
id	acadia17_170
authors	Byrne, Ultan
year	2017
title	Point-Cloud-Paint: A Software Tool for Speculative Urban Design Using Three-Dimensional Digital Collage
doi	https://doi.org/10.52842/conf.acadia.2017.170
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 170-177
summary	Beginning from a provocation in Auguste Blanqui’s Eternity by the Stars, this paper reports on a new methodology of digital collage for urban design. The research is situated relative to the current discourses surrounding both voxelization and point-cloud data structures in order to motivate the concept of a recombinant approach to design in existing cities. Building on these sources, and with reference to recent developments in mesh shape composition techniques, the paper presents the resulting software implementation “Point-Cloud-Paint”: a tool that enables collage-based combinatorial experimentation with urban point-cloud data.
keywords	simulation; representation; design methods; information processing
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_407
id	ecaadesigradi2019_407
authors	Capone, Mara, Lanzara, Emanuela, Marsillo, Laura and Nome Silva, Carlos Alejandro
year	2019
title	Responsive complex surfaces manufacturing using origami
doi	https://doi.org/10.52842/conf.ecaade.2019.2.715
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 715-724
summary	Contemporary architecture is considered a dynamic system, capable of adapting to different needs, from environmental to functional ones. The term 'Adaptable Architecture' describes an architecture from which specific components can be changed in relation to external stimuli. This change could be executed by the building system itself, transformed manually or it could be any other ability to be transformed by external forces (Leliveld et al.2017). Adaptability concept is therefore linked to motion and to recent advances in kinetic architecture. In our research we are studying the rules that we can use to design a kinetic architecture using origami. Parametric design allows us to digitally simulate the movement of origami structures, we are testing algorithmic modeling to generate doubly curvature surfaces starting from a designed surface and not from the process. Our main goal is to study the relationship between geometry, motion and shape. We are interested, in particular, in complex surface manufacture using origami technique to design a kinetic and reactive ceiling.
keywords	Origami; complex surface manufacture; responsive architecture; Applied Geometry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
doi	https://doi.org/10.52842/conf.caadria.2017.467
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2017_011
id	sigradi2017_011
authors	de Freitas Pires, Janice; Alice Theresinha Cybis Pereira
year	2017
title	Modelagem Paramétrica da Geometria Complexa de Estruturas Regenerativas na Arquitetura [Parametric Modeling of Complex Geometry of Regenerative Structures in Architecture]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.84-92
summary	The regenerative architecture emerges with an approach beyond the sustainability of buildings, seeking to extend the relationship with the environment, in order to promote the regeneration of living systems, through a complete understanding of the place to design regenerative structures. In this work, with a didactic objective, a study is carried out on the principles of regenerative architecture and its association with recurrent complex geometries in nature, structuring parametric modeling processes of such geometries.
keywords	Regenerative architecture; Complex geometry; Teaching architecture; Parametric modeling.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia17_238
id	acadia17_238
authors	El-Zanfaly, Dina
year	2017
title	A Multisensory Computational Model for Human-Machine Making and Learning
doi	https://doi.org/10.52842/conf.acadia.2017.238
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 238-247
summary	Despite the advancement of digital design and fabrication technologies, design practices still follow Alberti’s hylomorphic model of separating the design phase from the construction phase. This separation hinders creativity and flexibility in reacting to surprises that may arise during the construction phase. These surprises often come as a result of a mismatch between the sophistication allowed by the digital technologies and the designer’s experience using them. These technologies and expertise depend on one human sense, vision, ignoring other senses that could be shaped and used in design and learning. Moreover, pedagogical approaches in the design studio have not yet fully integrated digital technologies as design companions; rather, they have been used primarily as tools for representation and materialization. This research introduces a multisensory computational model for human-machine making and learning. The model is based on a recursive process of embodied, situated, multisensory interaction between the learner, the machines and the thing-in-the-making. This approach depends heavily on computational making, abstracting, and describing the making process. To demonstrate its effectiveness, I present a case study from a course I taught at MIT in which students built full-scale, lightweight structures with embedded electronics. This model creates a loop between design and construction that develops students’ sensory experience and spatial reasoning skills while at the same time enabling them to use digital technologies as design companions. The paper shows that making can be used to teach design while enabling the students to make judgments on their own and to improvise.
keywords	education, society & culture; fabrication
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2017_044
id	ecaade2017_044
authors	Fernando, Shayani, Reinhardt, Dagmar and Weir, Simon
year	2017
title	Simulating Self Supporting Structures - A Comparison study of Interlocking Wave Jointed Geometry using Finite Element and Physical Modelling Methods
doi	https://doi.org/10.52842/conf.ecaade.2017.2.177
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 177-184
summary	Self-supporting modular block systems of stone or masonry architecture are amongst ancient building techniques that survived unchanged for centuries. The control over geometry and structural performance of arches, domes and vaults continues to be exemplary and structural integrity is analysed through analogue and virtual simulation methods. With the advancement of computational tools and software development, finite and discrete element modeling have become efficient practices for analysing aspects for economy, tolerances and safety of stone masonry structures. This paper compares methods of structural simulation and analysis of an arch based on an interlocking wave joint assembly. As an extension of standard planar brick or stone modules, two specific geometry variations of catenary and sinusoidal curvature are investigated and simulated in a comparison of physical compression tests and finite element analysis methods. This is in order to test the stress performance and resilience provided by three-dimensional joints respectively through their capacity to resist vertical compression, as well as torsion and shear forces. The research reports on the threshold for maximum sinusoidal curvature evidenced by structural failure in physical modelling methods and finite element analysis.
keywords	Mortar-less; Interlocking; Structures; Finite Element Modelling; Models
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2017_125
id	caadria2017_125
authors	Huang, Jian Ming
year	2017
title	Integrating Computational Design and Traditional Crafts - A Reinvention of Bamboo Structures
doi	https://doi.org/10.52842/conf.caadria.2017.437
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 437-444
summary	Abstract: This paper searches for an alternative design method of integrating traditional material craft and computational design. It begins by analyzing Chinese philosophical view of nature, and proposes a natural design built method. The paper demonstrates the idea with two bamboo structure projects. In China, bamboo is closely linked to culture values and traditional craftsmanship. The projects research on the formation logic of bamboo system, and employs computational design method to activate the system formation. The projects strive to investigate computational design with unique eastern characteristics, to find out how it can help to reinvent its traditional values, and to search for a unification of formation logic and material sensibility.
keywords	Craftsmanship; materiality; form finding; bamboo
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2017_180
id	cf2017_180
authors	Jun, Ji Won; Silverio, Matteo; Llubia, Josep Alcover; Markopoulou, Areti; Chronis; Angelos; Dubor, Alexandre
year	2017
title	Remembrane: A Shape Changing Adaptive Structure
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 180-198.
summary	This paper presents a research on adaptive kinetic structures using shape memory alloys as actuators. The target of the research is designing and building an efficient kinetic structural system that could be potentially applied at an architectural scale. The project is based on the study of tensegrity and pantograph structures as a starting point to develop multiple digital and physical models of different structural systems that can be controllably moved. The result of this design process is a performative prototype that is controllable through a web-based interface. The main contribution of this project is not any of the presented parts by themselves but the integration of all of them in the creation of a new adaptive system that allows us to envision a novel way of designing, building and experiencing architecture in a dynamic and efficient way.
keywords	Responsive Structures, Kinetic Structures, Adaptive Systems, User Interaction, Structural Optimization
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2017_142
id	caadria2017_142
authors	Kaijima, Sawako, Tan, Ying Yi and Lee, Tat Lin
year	2017
title	Functionally Graded Architectural Detailing using Multi-Material Additive Manufacturing
doi	https://doi.org/10.52842/conf.caadria.2017.427
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 427-436
summary	The paper presents a future architectural detailing strategy enabled by the design of functionally graded materials (FGM). In specific, our proposal suggests the possibility of removing mechanical fasteners and adhesives from joint details. This is achieved by combining the principles of interlocking joineries found in traditional timber structures and current Multi-Material Additive Manufacturing (MMAM) technology to materialise FGMs. FGM belongs to a class of advanced materials characterised by variation in properties as the dimension varies by combining two or more materials at a microscopic scale (Mahamood et al. 2012). FGM is ubiquitous in nature and, when properly designed, can exhibit superior performance characteristics compared to objects comprised of homogeneous material properties. With the aim of developing interlocking details with improved performance, reliability, and design flexibility, we focus on controlling material stiffness, joint fitting, and geometry through the design of the microscopic material layout. A case study design will be presented to illustrate the process.
keywords	Functionality Graded Material; Multi-Material Additive Manufacturing ; Architectural Detailing; Interlocking Joints
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: