Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	acadia17_544
id	acadia17_544
authors	Schleicher, Simon; La Magna, Riccardo; Zabel, Joshua
year	2017
title	Bending-active Sandwich Shells: Studio One Research Pavilion 2017
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 544- 551
doi	https://doi.org/10.52842/conf.acadia.2017.544
summary	The goal of this paper is to advance the research on bending-active structures by investigating the system’s inherent structural characteristics and introducing an alternative approach to their design and fabrication. With this project, the authors propose the use of sandwich-structured composites to improve the load-bearing behavior of bending-active shells. By combining digital form-finding and form-conversion processes, it becomes possible to discretize a double-curved shell geometry into an assembly of single-curved sandwich strips. Due to the clever use of bending in the construction process, these strips can be made out of inexpensive and flat sheet materials. The assembly itself takes advantage of two fundamentally different structural states. When handled individually, the thin panels are characterized by their high flexibility, yet when cross-connected to a sandwich, they gain bending stiffness and increase the structure’s rigidity. To explain the possible impacts of this approach, the paper will discuss the advantages and disadvantages of bending-active structures in general and outline the potential of sandwich shells in particular. Furthermore, the authors will address the fundamental question of how to build a load-bearing system from flexible parts by using the practical example of the Studio One Research Pavilion. To illustrate this project in more detail, the authors will present the digital design process involved as well as demonstrate the technical feasibility of this approach through a built prototype in full scale. Finally, the authors will conclude with a critical discussion of the design approach proposed here and point out interesting topics for future research.
keywords	material and construction
series	ACADIA
email
last changed	2022/06/07 07:57

_id	caadria2017_037
id	caadria2017_037
authors	Klemmt, Christoph and Sodhi, Rajat
year	2017
title	Double-Curved Form Approximation with Identical Discrete Panel Geometries
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 457-466
doi	https://doi.org/10.52842/conf.caadria.2017.457
summary	To reduce the costs of manufacturing multiple moulds for double-curved facade construction, this research suggests a method of approximating the desired envelope with identically formed panel geometries. The panels can then be fabricated by only using two double-curved moulds. In a second step, individual segments are cut out of the identical base geometries. The method has been successfully tested with the construction of a prototype. The result is an intricately textured free-form geometry. The installation was built at a reasonable cost compared to other ways of fabricating double-curved geometry. The strength of the panels was utilised as the sole structural system of the prototype.
keywords	architecture; façade; double-curvature; discrete components; panelisation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ijac201715204
id	ijac201715204
authors	Mesnil, Romain; Cyril Douthe, Olivier Baverel and Bruno Léger
year	2017
title	Generalised cyclidic nets for shape modelling in architecture
source	International Journal of Architectural Computing vol. 15 - no. 2, 148-168
summary	The aim of this article is to introduce a bottom-up methodology for the modelling of free-form shapes in architecture that meet fabrication constraints. To this day, two frameworks are commonly used for surface modelling in architecture: non-uniform rational basis spline modelling and mesh-based approaches. The authors propose an alternative framework called generalised cyclidic nets that automatically yield optimal geometrical properties for the envelope and the structural layout, like the covering with planar quadrilaterals or hexagons. This framework uses a base circular mesh and Dupin cyclides, which are natural objects of the geometry of circles in space, also known as Mo?bius geometry. This article illustrates how complex curved shapes can be generated from generalised cyclidic nets. It addresses the extension of cyclidic nets to arbitrary topologies with the implementation of a ‘hole-filling’ strategy and also demonstrates that this framework gives a simple method to generate corrugated shells.
keywords	Free-form, conceptual design, structural morphology, architectural geometry, cyclidic net, fabrication-aware design, PQ mesh, corrugated shell
series	other
type	normal paper
email
last changed	2019/08/02 08:31

_id	cf2017_601
id	cf2017_601
authors	Gerber, David Jason; Pantazis, Evangelos; Wang, Alan
year	2017
title	Interactive Design of Shell Structures Using Multi Agent Systems: Design Exploration of Reciprocal Frames Based on Environmental and Structural Performance
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 601-616.
summary	This paper presents a continuation of research on the prototyping of multi-agent systems for architectural design with a focus on generative design as a means to improve design exploration in the context of multiple objectives and complexity. The interactive design framework focuses on coupling force, environmental constraints and fabrication parameters as design drivers for the form finding of shell structures. The objective of the research is to enable designers to intuitively generate free form shells structures that are conditioned by multiple objectives for architectural exploration in early stages of design. The generated geometries are explored through reciprocal frames, and are evaluated in an automated fashion both on local and global levels in terms of their structural and environmental performance and constructability. The analytical results along with fabrication constraints are fed back into the generative design process in order to more rapidly and expansively design explore across complexly coupled objectives. The paper describes the framework and presents the application of this methodology for the design of fabrication aware shell structures in which environmental and structural trade offs drive the final set of design options.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	ecaade2017_056
id	ecaade2017_056
authors	Kontovourkis, Odysseas
year	2017
title	Multi-objective design optimization and robotic fabrication towards sustainable construction - The example of a timber structure in actual scale
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 337-346
doi	https://doi.org/10.52842/conf.ecaade.2017.1.337
summary	This paper attempts to reconsider the role of advanced tools and their effective implementation in the field of Architecture, Engineering and Construction (AEC) through the concept of sustainable construction. In parallel, the paper aims to discuss and find common ground for communication between industrial and experimental processes guided by sustainable criteria, an area of investigation that is currently in the forefront of the research work conducted in our robotic construction laboratory. Within this frame, an ongoing work into the design, analysis and automated construction of a timber structure in actual scale is exemplified and used as a pilot study for further discussion. Specifically, the structure consists of superimposed layers of timber elements that are robotically cut and assembled together, formulating the overall structural system. In order to achieve a robust, reliable and economically feasible solution and to control the automated construction process, a multi-objective design optimization process using evolutionary principles is applied. Our purpose is to investigate possibilities for sustainable construction considering minimization of cost and material waste, and in parallel, discussing issues related to the environmental impact and the feasibility of solutions to be realized in actual scale.
keywords	Multi-objective optimization; robotic fabrication; cost and material waste minimization; sustainable construction; timber structure
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2017_115
id	caadria2017_115
authors	Araullo, Rebekah and Haeusler, M. Hank
year	2017
title	Asymmetrical Double-Notch Connection System in Planar Reciprocal Frame Structures
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 539-548
doi	https://doi.org/10.52842/conf.caadria.2017.539
summary	Reciprocal Frame Structures (RF) have broad application potentials. Flexible to using small available materials, they span large areas, including varied curvature and doubly-curved forms. Although not many buildings using RF have been constructed to date, records indicate RF efficiencies where timber was widely used in structures predating modern construction. For reasons of adaptability and economy, advances in computation and fabrication precipitated increase in research into RF structures as a contemporary architectural typology. One can observe that linear timber such as rods and bars feature in extensive RF research. However, interest in planar RF has only recently emerged in research. Hence one can argue that planar RF provides depth to explore new design possibilities. This paper contributes to the growing knowledge of planar RF by presenting a design project that demonstrates an approach in notching systems to explore design and structural performance. The design project, the developed design workflow, fabrication, assembly and evaluation are discussed in this paper.
keywords	Reciprocal Frame Structures; Space Frames; Computational Design; Digital Fabrication; Deployable Architecture
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
doi	https://doi.org/10.52842/conf.caadria.2017.467
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2017_431
id	cf2017_431
authors	Gonzalez, Paloma; Sass, Larry
year	2017
title	Constructive Design: Rule Discovery for 3D Printing Decomposed Large Objects
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 431-442.
summary	This paper presents a rule discovery process for designers that work with physically large 3D printed models. After a period of discovery, rules were formalized, then developed into operations and programmable functions used in a generative design system. Past examples of generative systems are built based on visual constraints leading to graphical outcomes. With the emergence of 3D printing, we introduce ideas for rule building based on physical constraints and outcomes. The decomposition rules are: curved surface slicing, freestanding attribute, interval patterning, edge mating, and pneumatic attribute. The freestanding attribute, the most novel rule, is based on Chilean anti-earthquake building techniques. This rule provides the greatest degree of structural stability to a model. We conclude with a discussion of results from the case study used to generate the set constructive rules. We believe this method of module generation, 3D Printing and assembles can support design prototyping and model manufacturing across scales.
keywords	Decomposition, Large Objects, 3D Printing.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	ecaade2017_248
id	ecaade2017_248
authors	Liapi, Katherine, Papantoniou, Andreana and Nousias, Chrysostomos
year	2017
title	Square tessellation patterns on curved surfaces:In search of a parametric design method
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 371-378
doi	https://doi.org/10.52842/conf.ecaade.2017.2.371
summary	Methods for Tessellating a flat surface with regular or semi-regular patterns of polygons have already been addressed in literature and can be easily parameterized. For the tessellation of curved surfaces using patterns of one or more regular polygons there is not a uniquely defined approach to the problem within the context of architectural research and applications. This paper is focused on the tessellation of curved surfaces with square tiles, where the tessellation pattern consists of four squares with partly overlapping sides. In this study double curvature surfaces were considered first, and subsequently surfaces of more complex geometry such as minimal surfaces. Specifically, a method for the square tessellation of two types of doubly curved surfaces, the spherical and the ellipsoidal, is discussed and presented in the paper. In addition, the square tessellation of two types of minimal surfaces, the catenoid and the helicoid, have also been examined and presented. For each one of the surfaces that have been considered, an algorithm that generates the distribution of the planar square surfaces on the surface and renders possible the parametric description of the problem, was developed and presented in the paper. A discussion on boundary conditions for each developed method is also included. The Grasshopper visual programming language has been used for the parametric description and display of the results in a graphic environment. The research discussed in this paper can find application in several real world problems including surface paneling, or space packing of polyhedral structural units on a curved surface.
keywords	square tessellation, curved surface tiling, ellipsoid tessellation, minimal surfaces tessellation, geometric appxoximation methods
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2017_045
id	sigradi2017_045
authors	Loyola, Mauricio; Sebastián Rozas, Sebastián Caldera
year	2017
title	Kerfing2: Una técnica para el diseño, fabricación y optimización de elementos de doble curvatura a partir de placas rígidas de madera [Kerfing2: A technique for the design, manufacture and optimization of double-curved elements from rigid wooden plates]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.307-313
summary	We present a novel technique for the design, optimization, and fabrication of plywood double-curvature building components, based on an ancient woodworking method known as kerfing. We explain the principles of geometric optimization, their implementation into computational algorithms, and show the first prototypes as proofs of concept (PoC).
keywords	CAD/CAM; Digital Fabrication; Kerfing; Complex Geometries
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ijac201715402
id	ijac201715402
authors	Alaçam, Sema; Orkan Zeynel Güzelci, Ethem Gürer and Saadet Zeynep Bac?noglu
year	2017
title	Reconnoitring computational potentials of the vault-like forms: Thinking aloud on muqarnas tectonics
source	International Journal of Architectural Computing vol. 15 - no. 4, 285-303
summary	This study sheds light on a holistic understanding of muqarnas with its historical, philosophical and conceptual backgrounds on one hand and formal, structural and algorithmic principles on the other hand. The vault-like Islamic architectural element, muqarnas, is generally considered to be a non-structural decorative element. Various compositional approaches have been proposed to reveal the inner logic of these complex geometric elements. Each of these approaches uses different techniques such as measuring, unit-based decoding or three-dimensional interpretation of two-dimensional patterns. However, the reflections of the inner logic onto different contexts, such as the usage of different initial geometries, materials or performative concerns, were neglected. In this study, we offer a new schema to approach the performative aspects of muqarnas tectonics. This schema contains new sets of elements, properties and relations deriving partly from previous approaches and partly from the technique of folding. Thus, this study first reviews the previous approaches to analyse the geometric and constructional principles of muqarnas. Second, it explains the proposed scheme through a series of algorithmic form-finding experiments. In these experiments, we question whether ‘fold’, as one of the performative techniques of making three-dimensional forms, contributes to the analysis of muqarnas in both a conceptual and computational sense. We argue that encoding vault-like systems via geometric and algorithmic relations based on the logic of the ‘fold’ provides informative and intuitive feedback for form-finding, specifically in the earlier phases of design. While focusing on the performative potential of a specific fold operation, we introduced the concept of bifurcation to describe the generative characteristics of folding technique and the way of subdividing the form with respect to redistribution of the forces. Thus, in this decoding process, the bifurcated fold explains not only to demystify the formal logic of muqarnas but also to generate new forms without losing contextual conditions.
keywords	Muqarnas, vault, layering, folding, force flow, bifurcation
series	journal
email
last changed	2019/08/07 14:03

_id	cf2017_001
id	cf2017_001
authors	Muslimin, Rizal
year	2017
title	Weaving, Folding and the Tension Between Them: A Discourse on a Structural Ideation Method
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 1-21.
summary	This paper presents a computational ideation method, aiming to generate different structural configurations using mechanical embedding and visual calculation. A set of schema to register mechanical description and the shape-relationship is provided. Our results point to a promising avenue in terms of how visual calculation and mechanical embedding work in tandem to extend the language of structural design and advance the future of interdisciplinary craft.
keywords	Structure, Ideation, Craft, Shape grammar, Tensegrity
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	acadia17_38
id	acadia17_38
authors	Ahlquist, Sean; McGee, Wes; Sharmin, Shahida
year	2017
title	PneumaKnit: Actuated Architectures Through Wale- and Course-Wise Tubular Knit-Constrained Pneumatic Systems
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 38-51
doi	https://doi.org/10.52842/conf.acadia.2017.038
summary	This research explores the development of seamless pneumatically actuated systems whose motion is controlled by the combination of differentially knitted textiles and standardized thin-walled silicone tubing. This work proposes a fundamental material strategy that addresses challenges ranging from soft robotics to pneumatic architecture. Research in soft robotics seeks to achieve complex motions through non-mechanical monolithic systems, comprised of highly articulated shapes molded with a combination of elastic and inelastic materials. Inflatables in architecture focus largely on the active structuring of static forms, as facade systems or as structured envelopes. An emerging use of pneumatic architecture proposes morphable, adaptive systems accomplished through differentiated mechanically interconnected components. In the research described in this paper, a wide array of capabilities in motion and geometric articulation are accomplished through the design of knitted sleeves that generate a series of actuated “elbows.” As opposed to molding silicone bladders, differentiation in motion is generated through the more facile ability of changing stitch structure, and shaping of the knitted textile sleeve, which constrains the standard silicone tubing. The relationship between knit differentiation, pneumatic pressure, and the resultant motion profile is studied initially with individual actuators, and ultimately in propositions for larger seamless assemblies. As opposed to a cellular study of individual components, this research proposes structures with multi-scalar articulation, from fiber and stitch to overall form, composed into seamless, massively deformable architectures.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_195
id	ecaade2017_195
authors	Collins, Jeffrey and Gentry, Russell
year	2017
title	KBAD - Knowledge Base for Architectural Detailing
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 657-666
doi	https://doi.org/10.52842/conf.ecaade.2017.2.657
summary	This paper examines the current state of the conventional Design-Bid-Build project, wherein design intentions are manually translated to construction directives by subcontractors based on industry-specific details. This process exacerbates a dilemma in design and construction; that often the designer may be unaware of certain details that are involved in fabricating and assembling building components. Research for Knowledge Base for Architectural Detailing (KBAD) proposes a system that takes advantage of current CAD software and programming language, bringing together the information provided by and important to the design team with the data required by the subcontractor to accurately produce architectural components, during the design phases of a project. The trade of architectural precast concrete is used to demonstrate the potential of such a system. Solid modeling, visual scripting, and programming language techniques working towards KBAD are described. Possible variations of architectural precast concrete panels, detailed with window openings, reveals, and embed plates, are presented.
keywords	BIM; HCI; Collaboration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_229
id	ecaade2017_229
authors	Decker, Martina
year	2017
title	Soft Human Computer Interfaces - Towards Soft Robotics in Architecture
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 739-744
doi	https://doi.org/10.52842/conf.ecaade.2017.2.739
summary	The emergence of media infused facades and new human computer interfaces have been of great interest in architecture in the recent decades. Most of the emerging examples are geared towards a multi-dimensional graphical output and most commonly stimulate our sense of sight. This paper explores recent developments in soft robotics and material sciences, developed at the Material Dynamics Lab at NJIT, that will allow the human computer interfaces to engage its users by captivating a multitude of senses simultaneously. Furthermore, this paper will contemplate future trajectories for the novel material strategies to improve human-computer or human-robot interaction, that one day may lead to truly robotic architectures.
keywords	Soft Robotics; Nanotechnology; Smart Materials; Robotic Architecture; Human Computer Interfaces (HCI); Graphical User Interfaces (GUI) to Tangible User Interfaces (TUI)
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2017_028
id	ecaade2017_028
authors	Elsayed, Kareem, Fioravanti, Antonio and Squasi, Francesco
year	2017
title	Low-Cost Housing - Testing snap-fit joints in agricultural residue panels
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 167-174
doi	https://doi.org/10.52842/conf.ecaade.2017.2.167
summary	Within the field of digitally fabricated housing, the paper outlines a theoretical model for a housing system that combines complete off-site prefabrication with parametric assemblies. The paper then presents some insights on the application of snap-fit joints to the wall assemblies entirely fabricated using agricultural residue panels. Mechanical characterization of the material was performed through axial tension, compression and 4-point bending tests. Guidelines of plastics snap-fit design were applied to the joint design within the elastic limits of the material. Three different full scale wall typology prototypes were built using this jointing technique. The results show that while snap-fits can be a promising solution encouraging self-build in low-cost housing, the brittle nature of the specific agricultural residue panel material necessitates further joint enhancements.
keywords	Digital fabrication; Low-cost housing; Agricultural residues; Structural testing
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia17_248
id	acadia17_248
authors	Felbrich, Benjamin; Fru?h, Nikolas; Prado, Marshall; Saffarian, Saman; Solly, James; Vasey, Lauren; Knippers, Jan; Menges, Achim
year	2017
title	Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long-Span Composite Structures
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 248-259
doi	https://doi.org/10.52842/conf.acadia.2017.248
summary	Fiber composite materials have tremendous potential in architectural applications due to their high strength-to-weight ratio and their ability to be formed into complex shapes. Novel fabrication processes can be based on the unique affordances and characteristics of fiber composites. Because these materials are lightweight and have high tensile strength, a radically different approach to fabrication becomes possible, which combines low-payload yet long-range machines—such as unmanned aerial vehicles (UAV)—with strong, precise, yet limited-reach industrial robots. This collaborative concept enables a scalable fabrication setup for long-span fiber composite construction. This paper describes the integrated design process and design development of a large-scale cantilevering demonstrator, in which the fabrication setup, robotic constraints, material behavior, and structural performance were integrated in an iterative design process.
keywords	material and construction; fabrication; construction; robotics
series	ACADIA
email
last changed	2022/06/07 07:50

_id	sigradi2017_025
id	sigradi2017_025
authors	Hemmerling, Marco
year	2017
title	Architecture by numbers - An interdisciplinary approach towards computational design and architectural geometry
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.180-185
summary	Architecture has always relied on mathematics to achieve proportioned aesthetics, structural performance, and reasonable construction. Computational tools have now given architects the means to design and build spatial concepts that would have been inconceivable even ten years ago. Against this background the paper discusses an educational approach that focuses on the early integration of computational principles, regarding the definition of geometry as well as material and fabrication parameters to inform the architectural design. Three case studies illustrate the interdisciplinary approach, conceived and carried out jointly by the Department of Architecture and the Department of Mathematics.
keywords	Curriculum; Architectural Geometry; Architecture and Mathematics; Computational Design and Fabrication.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2017_109
id	caadria2017_109
authors	Imanishi, Naoki, Hinoki, Shinichiro, Muraoka, Mizuki, Tateyama, Ran, Abe, U-ichi, Kensuke, Hotta and Ikeda, Yasushi
year	2017
title	Bamboo Concrete Shells - An Adaptable Construction Method Using Onsite Materials in a Remote Location
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 445-455
doi	https://doi.org/10.52842/conf.caadria.2017.445
summary	This paper proposes an on site construction support system using digital techniques to solve the issue of logistical inconvenience on remote islands, where industrialized construction methods are absent. Transporting heavy machinery is costly and difficult in isolated rural areas. In addition, introducing materials from outside creates a heavy ecological footprint when building. Locally produced construction materials resolve many of these issues. To test the potential of building within these constraints a case study site on an isolated island of Japan, named Kuchinoerabu, was chosen. A concrete shell structure was created using locally sourced bamboo as reinforcement. Through the study, several technical issues are revealed. Significantly, there is broad variation in the material properties of bamboo, and reducing errors when using unskilled labor is difficult. The system nominally manages the following functions: 1) Synchronizing data between CAD and the materialized form; 2) Checking errors between the target form and the one that was actually produced; 3) Inputting material characteristics on site. 4) Making a structural analysis, and reflecting its execution during construction. These functions minimize the margin of error, and aid an unskilled labor force to work more accurately.
keywords	Bamboo; natural material; digital construction
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: