Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 572

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_18
id	acadia17_18
authors	Abdel-Rahman, Amira; Michalatos, Panagiotis
year	2017
title	Magnetic Morphing
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 18-27
doi	https://doi.org/10.52842/conf.acadia.2017.018
summary	In an attempt to design shape-morphing multifunctional objects, this thesis uses programmable matter to design self-organizing multi-agent systems capable of morphing from one shape into another. The research looks at various precedents of self-assembly and modular robotics to design and prototype passive agents that could be cheaply mass-produced. Intelligence will be embedded into these agents on a material level, designing different local interactions to perform different global goals. The initial exploratory study looks at various examples from nature like plankton and molecules. Magnetic actuation is chosen as the external actuation force between agents. The research uses simultaneous digital and physical investigations to understand and design the interactions between agents. The project offers a systemic investigation of the effect of shape, interparticle forces, and surface friction on the packing and reconfiguration of granular systems. The ability to change the system state from a gaseous, liquid, then solid state offers new possibilities in the field of material computation, where one can design a "material" and change its properties on demand.
keywords	material and construction; construction/robotics; smart materials; smart assembly/construction; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2017_131
id	caadria2017_131
authors	Abe, U-ichi, Hotta, Kensuke, Hotta, Akito, Takami, Yosuke, Ikeda, Hikaru and Ikeda, Yasushi
year	2017
title	Digital Construction - Demonstration of Interactive Assembly Using Smart Discrete Papers with RFID and AR codes
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 75-84
doi	https://doi.org/10.52842/conf.caadria.2017.075
summary	This paper proposes and examines a new way of cooperation between human workers and machine intelligence in architectural scale construction. For the transfer of construction information between the physical and digital world, mature technologies such as Radio Frequency IDentifier (RFID), and emerging technologies like Augmented Reality (AR) are used in parallel to supplement each other. Dynamic data flow is implemented to synchronize digital and physical models by following the ID signatures of individual building parts. The contributions of this paper includes the demonstration of current technological limitations, and the proposal of a hybrid system between human and computer, which is tested in order to explore the possibilities of digitally enhanced construction methods.
keywords	Digital Construction; Augmented Reality; Human-Machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_054
id	ecaade2017_054
authors	Abramovic, Vasilija, Glynn, Ruairi and Achten, Henri
year	2017
title	ROAMNITURE - Multi-Stable Soft Robotic Structures
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 327-336
doi	https://doi.org/10.52842/conf.ecaade.2017.1.327
summary	The rise in robotics is not only changing fabrication research in architecture but increasingly providing opportunities for animating the materiality of architecture, offering responsive, performative and adaptive design possibilities for the built environment. A fundamental challenge with robotics is its suitability to safe, and comfortable use in proximity to the human body. Here we present the preliminary results of the Roamniture Project, a hybrid approach to developing kinetic architecture based on a combination of rigid and soft body dynamics.
keywords	Kinetic Architecture; Soft Robotics; Soft Architecture; Furniture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ijac201715301
id	ijac201715301
authors	Afsari, Kereshmeh; Charles Eastman and Dennis Shelden
year	2017
title	Building Information Modeling data interoperability for Cloud-based collaboration: Limitations and opportunities
source	International Journal of Architectural Computing vol. 15 - no. 3, 187-202
summary	Collaboration within Building Information Modeling process is mainly based on the manual transfer of document files in either vendor-specific formats or neutral format using Industry Foundation Classes. However, since the web enables Cloud-based Building Information Modeling services, it provides an opportunity to exchange data with web technologies. Alternative data sharing solutions include the federation of Building Information Modeling models and an interchange hub for data exchange in real time. These solutions face several challenges, are vendor locked, and integrate Building Information Modeling applications to a third new system. The main objective of this article is to investigate current limitations as well as opportunities of Cloud interoperability to outline a framework for a loosely coupled network-based Building Information Modeling data interoperability. This study explains that Cloud-Building Information Modeling data exchange needs to deploy major components of Cloud interoperability such as Cloud application programming interfaces, data transfer protocols, data formats, and standardization to redefine Building Information Modeling data flow in Cloud-based applications and to reshape collaboration process.
keywords	Building Information Modeling, Cloud, data exchange, interoperability, Industry Foundation Classes
series	journal
email
last changed	2019/08/07 14:03

_id	caadria2017_147
id	caadria2017_147
authors	Agirachman, Fauzan Alfi, Ozawa, Yo, Indraprastha, Aswin, Shinozaki, Michihiko, Sitompul, Irene Debora Meilisa, Nuraeni, Ruri, Chirstanti, Augustine Nathania, Putra, Andrew Cokro and Zefanya, Teresa
year	2017
title	Reimagining Braga - Remodeling Bandung's Historical Colonial Streetscape in Virtual Reality
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 23-32
doi	https://doi.org/10.52842/conf.caadria.2017.023
summary	This paper presents the experience of the first phase of remodeling existing historical and colonial district in Bandung, Indonesia, including existing building façade, streetscape and street furniture. Braga Street is chosen as study case because it is a well-known historical street in Bandung with art deco style buildings constructed during Dutch colonial era. By remodeling it, it could help stakeholders to evaluate existing Braga street condition, to test any modification of buildings along the street and to determine specific regulation for the street. In this case, we use Unity3D and Oculus Rift DK2 for remodeling current situation. We gathered feedback from respondents using a questionnaire given after they experienced the model in VR. Many lessons learned from modeling process and respondents' feedback: higher frame rate to make seamless VR experience by having all components on a low poly model and provide smoother movement to prevent visual discomfort. This paper's conclusion gives suggestions for anyone who want to start architecture modeling in virtual reality for the very first time and how to optimize it.
keywords	Virtual reality; historical building; digital reconstruction; streetscape
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201715203
id	ijac201715203
authors	Agirbas, Asli and Emel Ardaman
year	2017
title	Macro-scale designs through topological deformations in the built environment
source	International Journal of Architectural Computing vol. 15 - no. 2, 134-147
summary	Design studies are being done on contemporary master-plans which may be applied in many locations worldwide. Advances in information technology are becoming the base model of design studies, and these may be more effective than the efforts of humans in the field of architecture and urban design. However, urban morphology variables and constants must be considered while designing contemporary master-plans in the existing built environment. The aims of this study were to extend the use of computer software for different applications and to make a topological work in the regional context. Accordingly, a case study was made using the nCloth simulation tools to create non-Euclidean forms while protecting the road system, which is one of the constant parameters of urban morphology in the built environment.
keywords	Conceptual design, built environment, simulation, contemporary master-plans, urban morphology, topology
series	other
type	normal paper
email
last changed	2019/08/02 08:30

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
doi	https://doi.org/10.52842/conf.acadia.2017.028
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_085
id	ecaade2017_085
authors	Agustí-Juan, Isolda, Hollberg, Alexander and Habert, Guillaume
year	2017
title	Integration of environmental criteria in early stages of digital fabrication
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 185-192
doi	https://doi.org/10.52842/conf.ecaade.2017.2.185
summary	The construction sector is responsible for a big share of the global energy, resource demand and greenhouse gas emissions. As such, buildings and their designers are key players for carbon mitigation actions. Current research in digital fabrication is beginning to reveal its potential to improve the sustainability of the construction sector. To evaluate the environmental performance of buildings, life cycle assessment (LCA) is commonly employed. Recent research developments have successfully linked LCA to CAD and BIM tools for a faster evaluation of environmental impacts. However, these are only partially applicable to digital fabrication, because of differences in the design process. In contrast to conventional construction, in digital fabrication the geometry is the consequence of the definition of functional, structural and fabrication parameters during design. Therefore, this paper presents an LCA-based method for design-integrated environmental assessment of digitally fabricated building elements. The method is divided into four levels of detail following the degree of available information during the design process. Finally, the method is applied to the case study "Mesh Mould", a digitally fabricated complex concrete wall that does not require any formwork. The results prove the applicability of the method and highlight the environmental benefits digital fabrication can provide.
keywords	Digital fabrication; Parametric LCA; Early design; Sustainability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_38
id	acadia17_38
authors	Ahlquist, Sean; McGee, Wes; Sharmin, Shahida
year	2017
title	PneumaKnit: Actuated Architectures Through Wale- and Course-Wise Tubular Knit-Constrained Pneumatic Systems
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 38-51
doi	https://doi.org/10.52842/conf.acadia.2017.038
summary	This research explores the development of seamless pneumatically actuated systems whose motion is controlled by the combination of differentially knitted textiles and standardized thin-walled silicone tubing. This work proposes a fundamental material strategy that addresses challenges ranging from soft robotics to pneumatic architecture. Research in soft robotics seeks to achieve complex motions through non-mechanical monolithic systems, comprised of highly articulated shapes molded with a combination of elastic and inelastic materials. Inflatables in architecture focus largely on the active structuring of static forms, as facade systems or as structured envelopes. An emerging use of pneumatic architecture proposes morphable, adaptive systems accomplished through differentiated mechanically interconnected components. In the research described in this paper, a wide array of capabilities in motion and geometric articulation are accomplished through the design of knitted sleeves that generate a series of actuated “elbows.” As opposed to molding silicone bladders, differentiation in motion is generated through the more facile ability of changing stitch structure, and shaping of the knitted textile sleeve, which constrains the standard silicone tubing. The relationship between knit differentiation, pneumatic pressure, and the resultant motion profile is studied initially with individual actuators, and ultimately in propositions for larger seamless assemblies. As opposed to a cellular study of individual components, this research proposes structures with multi-scalar articulation, from fiber and stitch to overall form, composed into seamless, massively deformable architectures.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_52
id	acadia17_52
authors	Ajlouni, Rima
year	2017
title	Simulation of Sound Diffusion Patterns of Fractal-Based Surface Profiles
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 52-61
doi	https://doi.org/10.52842/conf.acadia.2017.052
summary	Acoustical design is one of the most challenging aspects of architecture. A complex system of competing influences (e.g., space geometry, size, proportion, material properties, surface detail, etc.) contribute to shaping the quality of the auditory experience. In particular, architectural surfaces affect the way that sound reflections propagate through space. By diffusing the reflected sound energy, surface designs can promote a more homogeneous auditory atmosphere by mitigating sharp and focused reflections. One of the challenges with designing an effective diffuser is the need to respond to a wide band of sound wavelengths, which requires the surface profile to precisely encode a range of detail sizes, depths and angles. Most of the available sound diffusers are designed to respond to a narrow band of frequencies. In this context, fractal-based surface designs can provide a unique opportunity for mitigating such limitations. A key principle of fractal geometry is its multilevel hierarchical order, which enables the same pattern to occur at different scales. This characteristic makes it a potential candidate for diffusing a wider band of sound wavelengths. However, predicting the reflection patterns of complicated fractal-based surface designs can be challenging using available acoustical software. These tools are often costly, complicated and are not designed for predicting early sound propagation paths. This research argues that writing customized algorithms provides a valuable, free and efficient alternative for addressing targeted acoustical design problems. The paper presents a methodology for designing and testing a customized algorithm for predicting sound diffusion patterns of fractal-based surfaces. Both quantitative and qualitative approaches were used to develop the code and evaluate the results.
keywords	design methods; information processing; simulation & optimization; data visualization
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_62
id	acadia17_62
authors	Al-Assaf, Nancy S.; Clayton, Mark J.
year	2017
title	Representing the Aesthetics of Richard Meier’s Houses Using Building Information Modeling
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 62-71
doi	https://doi.org/10.52842/conf.acadia.2017.062
summary	Beyond its widespread use for representing technical aspects and matters of building and construction science, Building information modeling (BIM) can be used to represent architectural relationships and rules drawn from aesthetic theory. This research suggests that BIM provides not only vocabulary but also syntactical tools that can be used to capture an architectural language. In a case study using Richard Meier’s language for single-family detached houses, a BIM template has been devised to represent the aesthetic concepts and relations therein. The template employs parameterized conceptual mass objects, syntactical rules, and a library of architectonic elements, such as walls, roofs, columns, windows, doors, and railings. It constrains any design produced using the template to a grammatically consistent expression or style. The template has been used as the starting point for modeling the Smith House, the Douglas House, and others created by the authors, demonstrating that the aesthetic template is general to many variations. Designing with the template to produce a unique but conforming design further illustrates the generality and expressiveness of the language. Having made the formal language explicit, in terms of syntactical rules and vocabulary, it becomes easier to vary the formal grammar and concrete vocabulary to produce variant languages and styles. Accordingly, this approach is not limited to a specific style, such as Richard Meier's. Future research can be conducted to demonstrate how designing with BIM can support stylistic change. Adoption of this approach in practice could improve the consistency of architectural designs and their coherence to defined styles, potentially increasing the general level of aesthetic expression in our built environment.
keywords	design methods; information processing; BIM; education
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_199
id	ecaade2017_199
authors	Al-Douri, Ph.D., Firas
year	2017
title	Computational and Modeling Tools - How effectively are Urban Designers and Planners using them Across the Design Development Process?
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 409-418
doi	https://doi.org/10.52842/conf.ecaade.2017.1.409
summary	Literature suggests that despite the increasing range and variety of computational tools and technologies, they have not really been employed for designing as extensively as it might be. This is due in part to the numerous challenges and impediments limiting their effective usage such as the methodological, procedural, and substantive factors and limitations, and skepticism about their impact of usage on the design process and outcome. The gap in our understanding of how advanced computational tools could support the design activities and design decision-making has expanded considerably to become a new area of inquiry with considerable room for the expansion of knowledge. This research is a single-case study that has been pursued in two phases: literature review and survey followed by analysis and discussion of the empirical results. The empirical observations were compared to the theoretical propositions and with results of similar research to highlight the areas and the extent to what the IT tools' usage have influenced the outcome of the design process. The comparison has helped highlight, explain, and justify the mechanism and improvements in the design outcome. Please write your abstract here by clicking this paragraph.
keywords	Computational urban design; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2017_035
id	caadria2017_035
authors	Al-Qattan, Emad, Yan, Wei and Galanter, Philip
year	2017
title	Establishing Parametric Relationships for Design Objects Through Tangible Interaction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 147-156
doi	https://doi.org/10.52842/conf.caadria.2017.147
summary	This paper presents a method for translating physical interaction with design objects into parametric relationships. A framework of the method is created to automate the generation of parametric equations as modeling constraints. The prototypes developed for this work link digital models with their physical counterparts to create a hybrid and tangible interface that enables user interaction. The prototypes investigate linear and non-linear types of object relationships for creating parametric models. The results demonstrate a novel approach in architectural design that assists users in creating complex geometric relationships through intuitive interaction.
keywords	Physical Computing; Parametric Design; Building Information Modeling; Tangible Interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_057
id	ecaade2017_057
authors	Al-Qattan, Emad, Yan, Wei and Galanter, Philip
year	2017
title	Tangible Computing for Establishing Generative Algorithms - A Case Study with Cellular Automata
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 347-354
doi	https://doi.org/10.52842/conf.ecaade.2017.1.347
summary	The work presented in this paper investigates the potential of tangible interaction to setup algorithmic rules for creating computational models. The research proposes a workflow that allows designers to create complex geometric patterns through their physical interaction with design objects. The method aims to address the challenges of designers implementing algorithms for computational modeling. The experiments included in this work are prototype-based, which link a digital environment with an artifact - the physical representation of a digital model that is integrated with a Physical Computing System. The digital-physical workflow is tested through enabling users to physically setup the rules of a Cellular Automata algorithm. The experiments demonstrate the possibility of utilizing tangible interaction to setup the initial cell state and the rules of a CA algorithm to generate complex geometric patterns.
keywords	Physical Computing; Tangible User-Interface; Cellular Automata
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2017_115
id	cf2017_115
authors	Alambeigi, Pantea; Chen, Canhui; Burry, Jane; Cheng, Eva
year	2017
title	Shape the Design with Sound Performance Prediction: A Case Study for Exploring the Impact of Early Sound Performance Prediction on Architectural Design
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 115-127.
summary	Acoustics is typically considered only late in developed design or even post occupancy, if at all, for specification of finishes and furnishing, and typically with a remedial mindset. In this paper, the role of sound performance as a design driver in increasing the speech privacy of a semi-enclosed meeting space in an open plan interior is studied. Sound performance prediction is applied as an imperative input to inform the meeting space design. The design is the second iteration in an evolving series of meeting spaces, and therefore has benefited from both subjective experiments and objective measurements performed with the first meeting space prototype. This study promotes a design method that offers a strong relationship between the digital simulation of sound performance and design development. By improving the speech privacy of a meeting space by means of purely form, geometry and design decisions, the significance of architecture in tuning the sound performance of a space is investigated.
keywords	Sound Performance Prediction, Sound Simulation, Meeting Space, Architectural Design
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	ijac201715402
id	ijac201715402
authors	Alaçam, Sema; Orkan Zeynel Güzelci, Ethem Gürer and Saadet Zeynep Bac?noglu
year	2017
title	Reconnoitring computational potentials of the vault-like forms: Thinking aloud on muqarnas tectonics
source	International Journal of Architectural Computing vol. 15 - no. 4, 285-303
summary	This study sheds light on a holistic understanding of muqarnas with its historical, philosophical and conceptual backgrounds on one hand and formal, structural and algorithmic principles on the other hand. The vault-like Islamic architectural element, muqarnas, is generally considered to be a non-structural decorative element. Various compositional approaches have been proposed to reveal the inner logic of these complex geometric elements. Each of these approaches uses different techniques such as measuring, unit-based decoding or three-dimensional interpretation of two-dimensional patterns. However, the reflections of the inner logic onto different contexts, such as the usage of different initial geometries, materials or performative concerns, were neglected. In this study, we offer a new schema to approach the performative aspects of muqarnas tectonics. This schema contains new sets of elements, properties and relations deriving partly from previous approaches and partly from the technique of folding. Thus, this study first reviews the previous approaches to analyse the geometric and constructional principles of muqarnas. Second, it explains the proposed scheme through a series of algorithmic form-finding experiments. In these experiments, we question whether ‘fold’, as one of the performative techniques of making three-dimensional forms, contributes to the analysis of muqarnas in both a conceptual and computational sense. We argue that encoding vault-like systems via geometric and algorithmic relations based on the logic of the ‘fold’ provides informative and intuitive feedback for form-finding, specifically in the earlier phases of design. While focusing on the performative potential of a specific fold operation, we introduced the concept of bifurcation to describe the generative characteristics of folding technique and the way of subdividing the form with respect to redistribution of the forces. Thus, in this decoding process, the bifurcated fold explains not only to demystify the formal logic of muqarnas but also to generate new forms without losing contextual conditions.
keywords	Muqarnas, vault, layering, folding, force flow, bifurcation
series	journal
email
last changed	2019/08/07 14:03

_id	sigradi2017_016
id	sigradi2017_016
authors	Alexandre da Silva, Geovany Jessé; Carlos Alejandro Nome, Lucy Donegan
year	2017
title	Ferramentas de Projeto para análise da qualidade urbana: Relacionando forma, usos, densidade e configuração espacial na cidade de João Pessoa, Brasil. [Design tools to assess urban quality: Relating form, uses, density and spatial configuration in João Pessoa city, Brazil.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.123-129
summary	This paper describes an experience in a Graduate course Architecture and Urbanism that used computational tools to analyze urban quality – considering form, uses, density and spatial configuration (based on visual and fields) – in different urban areas in the city of João Pessoa. Understanding that the city is a problem in organized complexity, different aspects condition the quality of use of spaces and reveal urban dynamics. Urban analysis aided by computational tools revealed successful in characterizing different problems and potentialities that can lay the foundation for interventions with more urban quality.
keywords	Design computational tools; Study of urban form, uses and density; Urban space performance; Spatial configuration.
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: