Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 507

Reformat results as: short short into frame detailed detailed into frame

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2023_44
id	ecaade2023_44
authors	Mayrhofer-Hufnagl, Ingrid and Ennemoser, Benjamin
year	2023
title	From Linear to Manifold Interpolation: Exemplifying the paradigm shift through interpolation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 419–429
doi	https://doi.org/10.52842/conf.ecaade.2023.2.419
summary	The advent of artificial intelligence, specifically neural networks, has marked a significant turning point in the field of computation. During such transformative times, we are often faced with a dearth of appropriate vocabulary, which forces us to rely on existing terms, regardless of their inadequacy. This paper argues that the term “interpolation,” typically used in deep learning (DL), is a prime example of this phenomenon. It is not uncommon for beginners to misunderstand its meaning, as DL pioneer Francois Chollet (2017) has noted. This misreading is especially true in the discipline of architecture, and this study aims to demonstrate how the meaning of “interpolation” has evolved in the second digital turn. We begin by illustrating, using 2D data, the difference between linear interpolation in the context of topological figures and its use in DL algorithms. We then demonstrate how 3DGANs can be employed to interpolate across different topologies in complex 3D space, highlighting the distinction between linear and manifold interpolation. In both 2D and 3D examples, our results indicate that the process does not involve continuous morphing but instead resembles the piecing together of a jigsaw puzzle to form many parts of a larger ambient space. Our study reveals how previous architectural research on DL has employed the term “interpolation” without clarifying the crucial differences from its use in the first digital turn. We demonstrate the new possibilities that manifold interpolation offers for architecture, which extend well beyond parametric variations of the same topology.
keywords	Interpolation, 3D Generative Adversarial Networks, Deep Learning, Hybrid Space
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2017_021
id	caadria2017_021
authors	Hwang, Ji-Hyoun and Lee, Hyunsoo
year	2017
title	3D Visual Simulation and Numerical Measurement of Privacy in Traditional Korean Palace
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 355-363
doi	https://doi.org/10.52842/conf.caadria.2017.355
summary	Traditional Korean architecture provides privacy through a proper balance of openness and enclosure through courtyard gardens. However, it is difficult to analyse privacy quantitatively in a three-dimensional space. The analysis of visual privacy is a significant issue in resolving conflicts and enhancing comfort. This paper develops a computational algorithm for simulating and measuring privacy on the concept of prospect and refuge: a design strategy for psychological wellbeing. In order to visualize privacy, the prospect area ratio (PAR) and refuge area ratio (RAR) are used in 3D visual simulations. PAR and RAR calculate the area ratio of the hiding space or the visible space in the images collected from the 3D model. In addition, parametric algorithms are proposed to calculate PAR/RAR automatically. Finally, this research demonstrates a case study of Gyeongbokgung, one of the five palace buildings in Korea, to show methods and processes of the quantitative analysis of visual privacy. The outcome of this paper contributes to quantitative confirmation of spatial characteristics that clearly distinguish between public space and private space of Gyeongbokgung. The proposed method also shows great potentials to quickly obtain the numeric value of privacy.
keywords	3D simulation; numerical measurement; traditional Korean palace; privacy
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2017_035
id	caadria2017_035
authors	Al-Qattan, Emad, Yan, Wei and Galanter, Philip
year	2017
title	Establishing Parametric Relationships for Design Objects Through Tangible Interaction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 147-156
doi	https://doi.org/10.52842/conf.caadria.2017.147
summary	This paper presents a method for translating physical interaction with design objects into parametric relationships. A framework of the method is created to automate the generation of parametric equations as modeling constraints. The prototypes developed for this work link digital models with their physical counterparts to create a hybrid and tangible interface that enables user interaction. The prototypes investigate linear and non-linear types of object relationships for creating parametric models. The results demonstrate a novel approach in architectural design that assists users in creating complex geometric relationships through intuitive interaction.
keywords	Physical Computing; Parametric Design; Building Information Modeling; Tangible Interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2017_002
id	caadria2017_002
authors	Haeusler, M. Hank, Muehlbauer, Manuel, Bohnenberger, Sascha and Burry, Jane
year	2017
title	Furniture Design Using Custom-Optimised Structural Nodes
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 841-850
doi	https://doi.org/10.52842/conf.caadria.2017.841
summary	Additive manufacturing techniques and materials have evolved rapidly during the last decade. Applications in architecture, engineering and construction are getting more attention as 3D printing is trying to find its place in the industry. Due to high material prices for metal 3d printing and in-homogenous material behaviour in printed plastic, 3D printing has not yet had a very significant impact at the scale of buildings. Limitations on scale, cost, and structural performance have also hindered the advancement of the technology and research up to this point. The research presented here takes a case study for the application of 3D printing at a furniture scale based on a novel custom optimisation approach for structural nodes. Through the concentration of non-standard geometry on the highly complex custom optimised nodes, 3D printers at industrial product scale could be used for the additive manufacture of the structural nodes. This research presents a design strategy with a digital process chain using parametric modeling, virtual prototyping, structural simulation, custom optimisation and additive CAD/CAM for a digital workflow from design to production. Consequently, the digital process chain for the development of structural nodes was closed in a holistic manner at a suitable scale.
keywords	Digital fabrication; node optimisation; structural performance; 3D printing; carbon fibre.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia17_308
id	acadia17_308
authors	Joyce, Sam Conrad; Ibrahim, Nazim
year	2017
title	Exploring the Evolution of Meta Parametric Models
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 308- 317
doi	https://doi.org/10.52842/conf.acadia.2017.308
summary	Parametric associative logic can describe complex design scenarios but are typically non-trivial and time consuming to develop. Optimization is being widely applied in many fields to find high-performing solutions to objective design needs, and this is being extended further to include user input to satisfy subjective preferences. However, whilst conventional optimization approaches can set good parameters for a model, they cannot currently improve the underlying logic defined by the associative topology of the model, leaving it limited to predefined domain of designs. This work looks at the application of Cartesian Genetic Programming (CGP) as a method for allowing the automatic generation, combination and modification of valid parametric models, including topology. This has value as it allows for a much greater range of solutions, and potentially computational "creativity," as it can develop unique and surprising solutions. However, the application of a genome-based definition and evolutionary optimization, respectively, to describe parametric models and develop better models for a problem, introduce many unknowns into the model generation process. This paper explains CGP as applied to parametric design and investigates the difference between using mating, mutating and both strategies together as a way of combining aspects of parent models, under selection by a genetic algorithm under random, objective and user (Interactive GA) preferences. We look into how this effects the resultant overiterated interaction in relation to both the geometry and the parametric model.
keywords	design methods; information processing; generative system; data visualization; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia17_392
id	acadia17_392
authors	Mesa, Olga; Stavric, Milena; Mhatre, Saurabh; Grinham, Jonathan; Norman, Sarah; Sayegh, Allen; Bechthold, Martin
year	2017
title	Non-Linear Matters: Auxetic Surfaces
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 392- 403
doi	https://doi.org/10.52842/conf.acadia.2017.392
summary	Auxetic structures exhibiting non-linear buckling are a prevalent research topic in the material sciences due to the ability to tune their reversible actuation, porosity, and negative Poisson’s ratio. However, the research is limited to feature sizes at scales below 10 mm2, and to date, there are no available efficient design and prototyping methods for architectural designers. Our study develops design principles and workflow methods to transform standard materials into auxetic surfaces at an architectural scale. The auxetic behavior is accomplished through buckling and hinging by subtracting from a homogeneous material to create perforated patterns. The form of the perforations, including shape, scale, and spacing, determines the behavior of multiple compliant "hinges" generating novel patterns that include scaling and tweening transformations. An analytical method was introduced to generate hinge designs in four-fold symmetric structures that approximate non-linear buckling. The digital workflow integrates a parametric geometry model with non-linear finite element analysis (FEA) and physical prototypes to rapidly and accurately design and fabricate auxetic materials. A robotic 6-axis waterjet allowed for rapid production while maintaining needed tolerances. Fabrication methods allowed for spatially complex shaping, thus broadening the design scope of transformative auxetic material systems by including graphical and topographical biases. The work culminated in a large-scale fully actuated and digitally controlled installation. It was comprised of auxetic surfaces that displayed different degrees of porosity, contracting and expanding while actuated electromechanically. The results provide a promising application for the rapid design of non-linear auxetic materials at scales complimentary to architectural products.
keywords	material and construction; CAM; prototyping; smart materials; auxetic
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ecaade2017_059
id	ecaade2017_059
authors	Narangerel, Amartuvshin, Lee, Ji-Hyun and Stouffs, Rudi
year	2017
title	Thermal and Daylighting Optimization of Complex 3D Faceted Façade for Office Building
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 209-218
doi	https://doi.org/10.52842/conf.ecaade.2017.1.209
summary	Conventional façade design and its impact on building energy as well as indoor comfort is a well-researched topic in the architecture field. This paper examines the potential of a complex 3D shaped building envelope, elaborating on previous work by implementing energy simulation within the building façade optimization process. The multi-objective optimizations are conducted considering total thermal energy, electricity generation through BIPV, and daylighting in generic single person office rooms under meteorological data of Korea and Singapore. The performance of the non-dominants is analyzed and the results show an improvement in all objectives comparing with the preliminary study.
keywords	Parametric facade design; muli-objective optimization; energy optimization; daylighting; form finding
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2020_165
id	ecaade2020_165
authors	Salland, Ida Neel, Pajuste, Mihkel and Hansen, Ellen Kathrine
year	2020
title	Sunlight Qualities in Dwellings - A new computational analysis tool
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 333-342
doi	https://doi.org/10.52842/conf.ecaade.2020.1.333
summary	"Architectural harmony with natural systems - including natural light - is essential to the wellbeing of building occupants" (Shrum, 2017). A preliminary study of existing daylight recommendations in standards and sustainability certificates, applied in Denmark, revealed a neglectance of the importance of receiving direct sunlight in dwellings. The qualities of sunlight were defined through a modest qualitative analysis, resulting in five parameters: Sunlight Hours, Winter Sun, Morning Sun, Golden Hours and Magic Moments. These were defined as specific time periods supported by research on the visual and non-visual effects on well-being. The parameters were subsequently translated into a parametric analysis tool, using design application Rhinoceros 3D and elaborating on a new usage of the design software Ladybug Tools. This analysis tool is predicted to be of high use to identify problematic apartments in the architectural design phase, to compare different design proposals and to meet the individual needs of new occupants.
keywords	Nordic daylighting; sunlight in dwellings; sunlight qualities; parametric design; daylight design
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac201715203
id	ijac201715203
authors	Agirbas, Asli and Emel Ardaman
year	2017
title	Macro-scale designs through topological deformations in the built environment
source	International Journal of Architectural Computing vol. 15 - no. 2, 134-147
summary	Design studies are being done on contemporary master-plans which may be applied in many locations worldwide. Advances in information technology are becoming the base model of design studies, and these may be more effective than the efforts of humans in the field of architecture and urban design. However, urban morphology variables and constants must be considered while designing contemporary master-plans in the existing built environment. The aims of this study were to extend the use of computer software for different applications and to make a topological work in the regional context. Accordingly, a case study was made using the nCloth simulation tools to create non-Euclidean forms while protecting the road system, which is one of the constant parameters of urban morphology in the built environment.
keywords	Conceptual design, built environment, simulation, contemporary master-plans, urban morphology, topology
series	other
type	normal paper
email
last changed	2019/08/02 08:30

_id	ecaade2017_155
id	ecaade2017_155
authors	Beir?o, José Nuno and de Klerk, Rui
year	2017
title	CIM-St - A Design Grammar for Street Cross Sections
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 619-628
doi	https://doi.org/10.52842/conf.ecaade.2017.2.619
summary	The design of streets plays an essential role in shaping the quality of our cities. In particular, the design of a street's cross section determines in many aspects the realm of its use, enhancing or reducing its ability for being walkable streets or traffic oriented streets. This paper shows a street cross section design interface where designs are controlled by an ontology and a parametric design system supported by a shape grammar. The ontology provides a semantically ordered vocabulary of shapes, symbols and descriptions upon which the grammar is defined. This paper focuses on the grammar definitions and its translation into a design oriented interface.
keywords	Parametric Design; Ontologies; Compound Grammars; Street Cross Section; Urban Design Systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2017_123
id	caadria2017_123
authors	Raonic, Aleksandra and Raonic, Milos
year	2017
title	Digital Tools, Analogue Minds - A Project-based Framework for Understanding the Dialogue In-between
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 561-570
doi	https://doi.org/10.52842/conf.caadria.2017.561
summary	This paper is situated in a specific research by design setting, where the realised work of architecture has been generated with digital tools operated by analogue minds of designers. It examines the relation- ship between the two entities, the designer and the tools, in an attempt to understand their specific roles better, trusting that this can lead to anew ways of enhancing the design process. Through revisiting the processes, methods, techniques and tools employed within various design-cycles of the project, authors present their own /designerly/ experience, pointing to both the potentials and limitations of the digital tools used. The attention is drawn to the importance for a human designer to have a critical awareness of the true nature of the computational systems and the capacity of both to adapt to the given context, in order to be able to embrace them and use to their full potentials.
keywords	project-based learning; design exploration; digital tools; design cognition; low-cost conditions
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia17_600
id	acadia17_600
authors	Tabrizian, Payam; Harmon, Brendan; Petrasova, Anna; Petras, Vaclav; Mitasova, Helena; Meentemeyer, Ross
year	2017
title	Tangible Immersion for Ecological Design
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 600- 609
doi	https://doi.org/10.52842/conf.acadia.2017.600
summary	We introduce tangible immersion—virtual reality coupled with tangible interaction—to foster interdisciplinary collaboration in a critical yet creative design process. Integrating tangible, embodied interaction with geospatial modeling and immersive virtual environments (IVE) can make 3D modeling fast and natural, while enhancing it with realistic graphics and quantitative analytics. We have developed Tangible Landscape, a technology that links a physical model with a geographic information system and 3D-modeling platform through a real-time cycle of interaction, 3D scanning, geospatial computation, and 3D rendering. With this technology, landscape architects, other professionals, and the public can collaboratively explore design alternatives through an iterative process of intuitive ideation, geocomputational analysis, realistic rendering, and critical analysis. This is demonstrated with a test case for interdisciplinary problem-solving, in which a landscape architect and geoscientist use Tangible Landscape to collaboratively design landforms, hydrologic systems, planting, and a trail network for a brownfield site. Using this tangible immersive environment they rapidly explored alternative scenarios. We discuss how the participants used real-time analytics to collaboratively assess trade-offs between environmental and experiential factors, balancing landscape complexity, biodiversity, remediation capacity, and aesthetics. Together they explored how the relationship between landforms and natural processes affected the performance of the designed landscape. Technologies that couple tangible geospatial modeling with IVEs have the potential to transform the design process by breaking down disciplinary boundaries, but may also offer new ways to imagine space and democratize design.
keywords	design methods; information processing; simulation & optimization; collaboration; VR; AR; mixed reality
series	ACADIA
email
last changed	2022/06/07 07:56

_id	cf2017_249
id	cf2017_249
authors	Agirbas, Asli
year	2017
title	Teaching Design by Coding in Architecture Undergraduate Education: A Case Study with Islamic Patterns
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 249-258.
summary	Computer-aided design has found its role in the undergraduate education of architects, and presently design by coding is also gradually finding further prominence in accord with the increasing demand by students who wish to learn more about this topic. This subject is included in an integrated manner in some studio courses on architecture design in some schools, or it is taught separately in elsewhere. In terms of the separate course on coding, the principal difficulty is that actual applications of the method can rarely be included due to time limitations and the fact that it is conducted separately from the studio course on architecture. However, within the framework of the architectural education, in order to learn about the coding it is necessary to consider it along with the design process, and this versatile thinking can only be achieved by the application of the design. In this study, an elective undergraduate course is considered in the context of design and to yield a versatile thinking strategy while learning the language of visual programming. The course progressed under the theoretical framework of shape grammar from the design stage through to the digital fabrication process, and the experimental studies were carried out on the selected topic of Islamic pattern. A method was proposed to improve the productivity of such courses, and an evaluation of the results is presented.
keywords	Islamic Patterns, Shape Grammars, Architectural Education, Parametric Design, CAAD.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_92
id	acadia17_92
authors	Anzalone, Phillip; Bayard, Stephanie; Steenblik, Ralph S.
year	2017
title	Rapidly Deployed and Assembled Tensegrity System: An Augmented Design Approach
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 92-101
doi	https://doi.org/10.52842/conf.acadia.2017.092
summary	The Rapidly Deployable and Assembled Tensegrity (RDAT) project enables the efficient automated design and deployment of differential-geometry tensegrity structures through computation-driven design-to-installation workflow. RDAT employs the integration of parametric and solid-modeling methods with production by streamlining computer numerically controlled manufacturing through novel detailing and production techniques to develop an efficient manufacturing and assembly system. The RDAT project emerges from the Authors' research in academia and professional practice focusing on computationally produced full-scale performative building systems and their innovative uses in the building and construction industry.
keywords	design methods; information processing; AI; machine learning; form finding; VR; AR; mixed reality
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2017_443
id	cf2017_443
authors	Araya, Sergio; Veliz, Felipe; Quest, Sylvana; Truffello, Ricardo
year	2017
title	Igneous Tectonics: Turning disaster into resource through digital fabrication
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 443-456.
summary	This investigation aims to develop and establish digital fabrication and design techniques and protocols to process volcanic materials that have caused significant environmental and social damage, using them to reconstruct new and improved structures to replace those destroyed, palliating the negative effects of volcanic eruptions and contributing a new economic resource to affected communities. The study recovers underused material and explore its qualities, recovering lost stonemasonry skills though advanced CNC and robotic manufacturing.
keywords	Robotic manufacturing, parametric design, digital fabrication, material research, CNC stonemasonry.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	ecaade2017_280
id	ecaade2017_280
authors	Baldissara, Matteo, Perna, Valerio, Saggio, Antonino and Stancato, Gabriele
year	2017
title	Plug-In Design - Reactivating the Cities with responsive Micro-Architectures. The Reciprocal Experience
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 571-580
doi	https://doi.org/10.52842/conf.ecaade.2017.2.571
summary	Every city has under utilized spaces that create a series of serious negative effects. Waiting for major interventions, those spaces can be reactivated and revitalized with soft temporary projects: micro interventions that light up the attention, give new meaning and add a new reading to abandoned spaces. We can call this kind of operations "plug-in design", inheriting the term from computer architecture: interventions which aim to involve the citizens and activate the environment, engage multiple catalyst processes and civil actions. Plug-in design interventions are by all meanings experimental, they seek for interaction with the users, locally and globally. Information Technology - with its parametric and site-specific capabilities and interactive features - can be instrumental to create such designs and generate a new consciousness of the existing environment. With this paper we will illustrate how two low-budget interventions have re-activated a forgotten public space. Parametric design with a specific script allowing site-specific design, materials and structure optimization and a series of interactive features, will be presented through Reciprocal 1.0 and Reciprocal 2.0 projects which have been built in 2016 in Italy by the nITro group.
keywords	reciprocal frame; parametric design; responsive technology; plug-in design; interactivity; re-activate
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201715101
id	ijac201715101
authors	Bieg, Kory and Clay Odom
year	2017
title	Lumifoil and Tschumi: Virtual projections and architectural interventions
source	International Journal of Architectural Computing vol. 15 - no. 1, 6-17
summary	This article introduces the theoretical and technical framework for the design of a temporary rooftop canopy on the red generator—one of the buildings designed by Bernard Tschumi for the Florida International University School of Architecture. The project, Lumifoil, was designed using both top-down and bottom-up computational techniques, including surface modeling via projected geometries and scripted cellular subdivisions and assemblies. Lumifoil attempts to synthesize these two often-conflicting design approaches into a generative design process which leverages context, form, surface, and structure as affective and effective actors. Lumifoil is the result of a design methodology which is both active and reactive to existing conditions of the site and new opportunities afforded by the program. It is contextual in its top-down relationship to Tschumi’s existing building and theory, generative in how details emerge bottom-up through scripts which lack any reference to site, and emergent in the resulting synthetic processes and effects which are produced. Through this methodological development, the project both tracks and responds to popular architectural theory and design from the mid-1990s to today. The theoretical underpinnings of the project build upon the idea that the actual (the real-life physical manifestation of matter) and the virtual (the potential for an object to be) are two constantly shifting paradigms in which design processes can intervene to help develop an architectural solution from a range of possibilities. The technical aspect of the project includes the collaborative workflow between the architecture offices of OTA+ and studio MODO with Arup Engineers to resolve structural issues using parametric modeling tools and structural analysis software. The final project is entirely parametric and fabrication is completely automated.
keywords	Tschumi, Parametric, Installation, Generative, Projection
series	other
type	normal paper
email
last changed	2019/08/02 08:16

_id	ijac201715302
id	ijac201715302
authors	Borges de Vasconselo, Tássias and David Sperling
year	2017
title	From representational to parametric and algorithmic interactions: A panorama of Digital Architectural Design teaching in Latin America
source	International Journal of Architectural Computing vol. 15 - no. 3, 215-229
summary	This study focuses on the context of graphic representation technologies and digital design on Architectural teaching in Latin America. From categories proposed by Oxman and Kotnik and through a mapping study framed by a systematic review in CumInCAD database, it is presented a panorama of the state-of-art of the digital design on Architectural teaching in the region, between 2006 and 2015. The results suggest a context of coexistence of representational interaction and parametric interaction, as well as a transition from one to another and the emergence of the first experiments in algorithmic interaction. As this mapping shows an ongoing movement toward Digital Architectural Design in Latin America in the last decade, and points out its dynamics in space in time, it could contribute to strengthen a crowdthinking network on this issue in the region and with other continents.
keywords	Computer-aided architectural design, Digital Architectural Design teaching, interaction with digital media, levels of design computability, Latin America, mapping study
series	journal
email
last changed	2019/08/07 14:03

_id	cf2017_051
id	cf2017_051
authors	Chen, Kian Wee; Janssen, Patrick; Norford, Leslie
year	2017
title	Automatic Parameterisation of Semantic 3D City Models for Urban Design Optimisation
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 51-65.
summary	We present an auto-parameterisation tool, implemented in Python, that takes in a semantic model, in CityGML format, and outputs a parametric model. The parametric model is then used for design optimisation of solar availability and urban ventilation potential. We demonstrate the tool by parameterising a CityGML model regarding building height, orientation and position and then integrate the parametric model into an optimisation process. For example, the tool parameterises the orientation of a design by assigning each building an orientation parameter. The parameter takes in a normalised value from an optimisation algorithm, maps the normalised value to a rotation value and rotates the buildings. The solar and ventilation performances of the rotated design is then evaluated. Based on the evaluation results, the optimisation algorithm then searches through the parameter values to achieve the optimal performances. The demonstrations show that the tool eliminates the need to set up a parametric model manually, thus making optimisation more accessible to designers.
keywords	City Information Modelling, Conceptual Urban Design, Parametric Modelling, Performance-Based Urban Design
series	CAAD Futures
email
last changed	2017/12/01 14:37

For more results click below: