Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 488

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_099
id	ecaade2017_099
authors	Bialkowski, Sebastian
year	2017
title	tOpos - GPGPU Accelerated Structural Optimisation Utility for Architects
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 679-688
doi	https://doi.org/10.52842/conf.ecaade.2017.1.679
summary	The paper focuses on possibilities of already known engineering procedures such as Finite Element Method or Topology Optimisation for effective implementation in architectural design process. The existing attempts of complex engineering algorithms implementation, as a form finding approach will be discussed. By intersecting architectural form evaluation with engineering analysis complemented by optimisation algorithms, the new quality of contemporary architecture design process may appears.
keywords	topology optimisation; design support tools; complex geometries; General Programming GPU
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia19_90
id	acadia19_90
authors	Forward, Kristen; Taron, Joshua
year	2019
title	Waste Ornament
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 90-99
doi	https://doi.org/10.52842/conf.acadia.2019.090
summary	The emergence of computational design and fabrication tools has escalated the potentials of architectural ornamentation to become innovative, beautiful, and highly sustainable. Historically, ornament has been known to express character and reveal relationships between materiality, technological advances, and societal evolution. But ornament rapidly declined in the late 1800s in large part due to mechanization and modernist ideals of uniform, unadorned façade components. However, ornamentation in architecture has recently reappeared—a development that can be linked closely to advancements in computational design and digital fabrication. While these advancements offer the ability to create expressive architecture, their potential contribution to the improvement of sustainable architecture has largely been overlooked (Augusti-Juan and Habert 2017). This paper provides a brief revisitation to the history of ornament and investigates the impact of computation and automation on the production of contemporary ornament. The paper also attempts to catalog examples of how designers have used computational technologies to address the growing criticality of environmental concerns. Moreover, the paper presents the Waste Ornament project, a research platform that critically examines how we can leverage technology to augment the visual and sustainable performance of facade ornamentation to reduce energy use in buildings. Three sub-projects are identified as territories for further research into sustainable ornamentation, ranging from material sourcing, to high-performance buildings, to the development of a systematic upcycling process that transforms old facades into new ones. While the examples are not exhaustive, they attempt to interlace the general ideas of waste and ornament by addressing particular issues that converge at building envelopes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2017_007
id	sigradi2017_007
authors	Gronda, Ma. Luciana; Mauro Chiarella
year	2017
title	Materialidad Digital. Análisis de estrategias de Arquitectura Orientada al Desempeño transferibles al Diseño Resiliente [Digital Materiality. Analysis of Performance-Oriented Architecture strategies transferable to Resilient Design]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.51-59
summary	The general objective of the research is to contribute to the critical conceptualization of experimental architectural practices in the context of the production suggested by Digital Materiality from a global perspective. Performance Oriented Architecture is the capacity that material systems have for Active, Responsive or Living Performance. These three lines of action, analyzed with antecedents, suggest efficient forms of symbiosis with the environment, starting from the application of Biomimetic research methodologies. Strategic possibilities for implementation are identified where technology, interdisciplinary and with creativity, offers access to Resilient Design solutions to adapt to the consequences of a design subordinated to the needs of industrialization.
keywords	Digital Materiality; Performance; Biomimetic Research; Resilient Design.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_122
id	ecaade2017_122
authors	Peralta, Mercedes and Loyola, Mauricio
year	2017
title	Performative Materiality - A DrawBot for Materializing Kinetic Human-Machine Interaction in Architectural Space
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 611-618
doi	https://doi.org/10.52842/conf.ecaade.2017.1.611
summary	This paper presents an exploration of movement as a design material to evidence human-machine interaction in an architectural space. An autonomous robotic vehicle with environmental sensory capabilities interacts kinetically with people by recognizing their emotional states from their body postures. A drawing device installed in the vehicle leaves a trace on the floor as a material testimony to the mutual dynamics. The complex yet surprisingly intuitive choreographic interaction of the machine and its social and physical environment blurs the boundaries between drawing, machine, and performance. In general, the project conceptualizes movement as a design material, drawing as a performative action, and social interaction as a physical force, all of which can be enhanced or mediated by digital technologies to produce results with aesthetic value.
keywords	Human-Machine Interaction; Drawing Machine; Performance Design
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_269
id	ecaade2017_269
authors	Rahmani Asl, Mohammad, Das, Subhajit, Tsai, Barry, Molloy, Ian and Hauck, Anthony
year	2017
title	Energy Model Machine (EMM) - Instant Building Energy Prediction using Machine Learning
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 277-286
doi	https://doi.org/10.52842/conf.ecaade.2017.2.277
summary	In the process of building design, energy performance is often simulated using physical principles of thermodynamics and energy behaviour using elaborate simulation tools. However, energy simulation is computationally expensive and time consuming process. These drawbacks limit opportunities for design space exploration and prevent interactive design which results in environmentally inefficient buildings. In this paper we propose Energy Model Machine (EMM) as a general and flexible approximation model for instant energy performance prediction using machine learning (ML) algorithms to facilitate design space exploration in building design process. EMM can easily be added to design tools and provide instant feedback for real-time design iterations. To demonstrate its applicability, EMM is used to estimate energy performance of a medium size office building during the design space exploration in widely used parametrically design tool as a case study. The results of this study support the feasibility of using machine learning approaches to estimate energy performance for design exploration and optimization workflows to achieve high performance buildings.
keywords	Machine Learning; Artificial Neural Networks; Boosted Decision Tree; Building Energy Performance; Parametric Modeling and Design; Building Performance Optimization
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia17_544
id	acadia17_544
authors	Schleicher, Simon; La Magna, Riccardo; Zabel, Joshua
year	2017
title	Bending-active Sandwich Shells: Studio One Research Pavilion 2017
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 544- 551
doi	https://doi.org/10.52842/conf.acadia.2017.544
summary	The goal of this paper is to advance the research on bending-active structures by investigating the system’s inherent structural characteristics and introducing an alternative approach to their design and fabrication. With this project, the authors propose the use of sandwich-structured composites to improve the load-bearing behavior of bending-active shells. By combining digital form-finding and form-conversion processes, it becomes possible to discretize a double-curved shell geometry into an assembly of single-curved sandwich strips. Due to the clever use of bending in the construction process, these strips can be made out of inexpensive and flat sheet materials. The assembly itself takes advantage of two fundamentally different structural states. When handled individually, the thin panels are characterized by their high flexibility, yet when cross-connected to a sandwich, they gain bending stiffness and increase the structure’s rigidity. To explain the possible impacts of this approach, the paper will discuss the advantages and disadvantages of bending-active structures in general and outline the potential of sandwich shells in particular. Furthermore, the authors will address the fundamental question of how to build a load-bearing system from flexible parts by using the practical example of the Studio One Research Pavilion. To illustrate this project in more detail, the authors will present the digital design process involved as well as demonstrate the technical feasibility of this approach through a built prototype in full scale. Finally, the authors will conclude with a critical discussion of the design approach proposed here and point out interesting topics for future research.
keywords	material and construction
series	ACADIA
email
last changed	2022/06/07 07:57

_id	sigradi2017_043
id	sigradi2017_043
authors	Griz, Cristiana; Natália Queiroz, Carlos Nome
year	2017
title	Edificação Modular: Estudo de caso e protótipo de um sistema construtivo de código aberto utilizando prototipagem rápida [Modular Building: Case study and prototype of an open source modular system using rapid prototyping]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.293-300
summary	This paper presents the research development for a base structural module for the Casa Nordeste project. Casa Nordeste is a compact housing experiment that will participate in the Solar Decathlon Latin America competition. It consists of a modular building that houses living, cooking, and sanitizing space. Developments presented are based on digital design and fabrication principles and processes, through algorithms that allow its customization. In this sense, discussions begin with a brief theoretical discussion about the concepts that underline the project: evolutionary housing; digital technologies that improve design and construction; open source construction and generative design systems. The paper finalizes by presenting and discussing developments of three different design aspects of the structural module: (a) geometry of the frames, (b) its modulation, and (c) fittings and joining mechanisms.
keywords	Digital fabrication; Rapid prototyping; Visual programming; Compact housing.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia20_382
id	acadia20_382
authors	Hosmer, Tyson; Tigas, Panagiotis; Reeves, David; He, Ziming
year	2020
title	Spatial Assembly with Self-Play Reinforcement Learning
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 382-393.
doi	https://doi.org/10.52842/conf.acadia.2020.1.382
summary	We present a framework to generate intelligent spatial assemblies from sets of digitally encoded spatial parts designed by the architect with embedded principles of prefabrication, assembly awareness, and reconfigurability. The methodology includes a bespoke constraint-solving algorithm for autonomously assembling 3D geometries into larger spatial compositions for the built environment. A series of graph-based analysis methods are applied to each assembly to extract performance metrics related to architectural space-making goals, including structural stability, material density, spatial segmentation, connectivity, and spatial distribution. Together with the constraint-based assembly algorithm and analysis methods, we have integrated a novel application of deep reinforcement (RL) learning for training the models to improve at matching the multiperformance goals established by the user through self-play. RL is applied to improve the selection and sequencing of parts while considering local and global objectives. The user’s design intent is embedded through the design of partial units of 3D space with embedded fabrication principles and their relational constraints over how they connect to each other and the quantifiable goals to drive the distribution of effective features. The methodology has been developed over three years through three case study projects called ArchiGo (2017–2018), NoMAS (2018–2019), and IRSILA (2019-2020). Each demonstrates the potential for buildings with reconfigurable and adaptive life cycles.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2017_056
id	ecaade2017_056
authors	Kontovourkis, Odysseas
year	2017
title	Multi-objective design optimization and robotic fabrication towards sustainable construction - The example of a timber structure in actual scale
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 337-346
doi	https://doi.org/10.52842/conf.ecaade.2017.1.337
summary	This paper attempts to reconsider the role of advanced tools and their effective implementation in the field of Architecture, Engineering and Construction (AEC) through the concept of sustainable construction. In parallel, the paper aims to discuss and find common ground for communication between industrial and experimental processes guided by sustainable criteria, an area of investigation that is currently in the forefront of the research work conducted in our robotic construction laboratory. Within this frame, an ongoing work into the design, analysis and automated construction of a timber structure in actual scale is exemplified and used as a pilot study for further discussion. Specifically, the structure consists of superimposed layers of timber elements that are robotically cut and assembled together, formulating the overall structural system. In order to achieve a robust, reliable and economically feasible solution and to control the automated construction process, a multi-objective design optimization process using evolutionary principles is applied. Our purpose is to investigate possibilities for sustainable construction considering minimization of cost and material waste, and in parallel, discussing issues related to the environmental impact and the feasibility of solutions to be realized in actual scale.
keywords	Multi-objective optimization; robotic fabrication; cost and material waste minimization; sustainable construction; timber structure
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2017_185
id	caadria2017_185
authors	McGinley, Tim, Abroe, Brett, Kroll, David, Murphy, Matt, Sare, Tessa and Gu, Ning
year	2017
title	Agile X UniSA Pavilion: Agile Principles and the Parametric Paradox
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 169-178
doi	https://doi.org/10.52842/conf.caadria.2017.169
summary	The world is experiencing an ever increasing pace of change and yet our design processes typically follow a waterfall model that make can make change and adaptation difficult. Digital design approaches provide an opportunity to develop agile solutions that are more open to change in the design process. This paper proposes the development of immaterial architectures wherein the material expression is left to later in the design process when there is greater certainty. We describe a series of 3 workshops that employ aspects of agile software development methodologies into architecture. The workshops proposed 3 immaterial pavilions for Delft, Adelaide and Tianjin. This first cycle of three workshops resulted in the design, fabrication and installation of the Agile X UniSA Pavilion in Adelaide. This paper discusses the applicability of agile development methodologies to this process and details a series of adaptations to provide a set of appropriate agile development principles for architecture.
keywords	Agile; Architecture pavilion; Immaterial architecture; Parametric paradox; Collaboration
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia17_382
id	acadia17_382
authors	Melenbrink, Nathan; Kassabian, Paul; Menges, Achim; Werfel, Justin
year	2017
title	Towards Force-aware Robot Collectives for On-site Construction
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 382- 391
doi	https://doi.org/10.52842/conf.acadia.2017.382
summary	Due to the irregular and variable environments in which most construction projects take place, the topic of on-site automation has previously been largely neglected in favor of off-site prefabrication. While prefabrication has certain obvious economic and schedule benefits, a number of potential applications would benefit from a fully autonomous robotic construction system capable of building without human supervision or intervention; for example, building in remote environments, or building structures whose form changes over time. Previous work using a swarm approach to robotic assembly generally neglected to consider forces acting on the structure, which is necessary to guarantee against failure during construction. In this paper we report on key findings for how distributed climbing robots can use local force measurements to assess aspects of global structural state. We then chart out a broader trajectory for the affordances of distributed on-site construction in the built environment and position our contributions within this research agenda. The principles explored in simulation are demonstrated in hardware, including solutions for force-sensing as well as a climbing robot.
keywords	material and construction; physics; construction/robotics; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:58

_id	acadia17_392
id	acadia17_392
authors	Mesa, Olga; Stavric, Milena; Mhatre, Saurabh; Grinham, Jonathan; Norman, Sarah; Sayegh, Allen; Bechthold, Martin
year	2017
title	Non-Linear Matters: Auxetic Surfaces
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 392- 403
doi	https://doi.org/10.52842/conf.acadia.2017.392
summary	Auxetic structures exhibiting non-linear buckling are a prevalent research topic in the material sciences due to the ability to tune their reversible actuation, porosity, and negative Poisson’s ratio. However, the research is limited to feature sizes at scales below 10 mm2, and to date, there are no available efficient design and prototyping methods for architectural designers. Our study develops design principles and workflow methods to transform standard materials into auxetic surfaces at an architectural scale. The auxetic behavior is accomplished through buckling and hinging by subtracting from a homogeneous material to create perforated patterns. The form of the perforations, including shape, scale, and spacing, determines the behavior of multiple compliant "hinges" generating novel patterns that include scaling and tweening transformations. An analytical method was introduced to generate hinge designs in four-fold symmetric structures that approximate non-linear buckling. The digital workflow integrates a parametric geometry model with non-linear finite element analysis (FEA) and physical prototypes to rapidly and accurately design and fabricate auxetic materials. A robotic 6-axis waterjet allowed for rapid production while maintaining needed tolerances. Fabrication methods allowed for spatially complex shaping, thus broadening the design scope of transformative auxetic material systems by including graphical and topographical biases. The work culminated in a large-scale fully actuated and digitally controlled installation. It was comprised of auxetic surfaces that displayed different degrees of porosity, contracting and expanding while actuated electromechanically. The results provide a promising application for the rapid design of non-linear auxetic materials at scales complimentary to architectural products.
keywords	material and construction; CAM; prototyping; smart materials; auxetic
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2017_055
id	caadria2017_055
authors	Caetano, In?s and Leit?o, António
year	2017
title	Integration of an Algorithmic BIM Approach in a Traditional Architecture Studio
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 633-642
doi	https://doi.org/10.52842/conf.caadria.2017.633
summary	Algorithmic BIM combines BIM and Generative Design (GD), merging the potentialities of both approaches. In this paper we describe the design process of a set of parametric facades developed using Algorithmic-BIM, and how this approach was integrated into the design workflow of two architectural studios. We demonstrate how the integration of GD together with BIM influenced the whole design process and also the selection of the final solution. Some of the limitations found during the entire process are also addressed in the paper, such as tight deadlines and financial constraints. Finally, we explain the pros and cons of using this design method compared to a traditional BIM approach, and we discuss the implementation of this paradigm in a traditional design practice. This work was developed using Rosetta, an IDE for Generative Design that supports scripts using different programming languages and allows the generation and edition of 3D models in a variety of CAD and BIM applications. The result of this work is an information model of three parametric facades for a residential building, from which we can extract material quantities and construction performance tests.
keywords	Generative design; collaborative design; CAD-BIM portability; parametric facade design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2017_163
id	caadria2017_163
authors	Kalantari, Saleh and Saleh Tabari, Mohammad Hassan
year	2017
title	GrowMorph: Bacteria Growth Algorithm and Design
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 479-487
doi	https://doi.org/10.52842/conf.caadria.2017.479
summary	GrowMorph is an ongoing research project that addresses the logic of bacterial cellular growth and its potential uses in architecture and design. While natural forms have always been an inspiration for human creativity, contemporary technology and scientific knowledge can allow us to advance the principle of biomimesis in striking new directions. By examining various patterns of bacterial growth, including their parametric logic, their use of responsive membranes and scaffolding structures, and their environmental fitness, this research creates new algorithmic design and construction models that can be applied through digital fabrication. Based on data from confocal microscopy, simulations were created using programming language Processing to model the environmental responses and morphology of the bacteria's growth. To demonstrate the utility of the results, the simulations created in this research were used to design an organically shaped pavilion and to suggest a new digital knitting process for material construction. The results from the study can inspire designers to make use of bacterial growth logic in their work, and provide them with practical tools for this purpose. Potential applications include novel designs for responsive surfaces, new fabrication processes, and unique spatial structures in future architectural work.
keywords	Synthetic Biology; Architecture; Bio-fabrication; Bio-constructs; Design Computation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2017_084
id	sigradi2017_084
authors	Macêdo dos Santos, Deborah; José Nuno Dinis Cabral Beirão
year	2017
title	Generative tool to support architectural design decision of earthbag building domes
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.584-589
summary	The interest in earthbag dome construction (also known as sandbag, superadobe or superblock construction) is increasing as a world consciousness develops to achieve the planet’s equilibrium for sustainable living. The main objective of this research is to develop a parametric tool to help architects modeling virtual earthbag domes from ideation to construction phase. This challenge has been addressed by adopting an experimental methodology that explores parametric generative design with the use of visual programming language (VPL). In this paper we present the development of a tool for the ideation level including features that allow for the calculation of material quantification. The usability of the tool was validated by earthbag constructors and architects.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ijac201715404
id	ijac201715404
authors	Miranda, Pablo
year	2017
title	Computer utterances: Sequence and event in digital architecture
source	International Journal of Architectural Computing vol. 15 - no. 4, 268-284
summary	Barely a month before the end of World War II, a technical report begun circulating among allied scientists: the ‘First Draft of a Report on the EDVAC’, attributed to John von Neumann, described for the first time the design and implementation of the earliest stored-program computer. The ‘First Draft’ became the template followed by subsequent British and American computers, establishing the standard characteristics of most computing machines to date. This article looks at how the material and design choices described in this report influenced architecture, as it set up the technological matrix onto which a discipline relying on a tradition of drawn geometry would be eventually completely remediated. It consists of two parts: first, a theoretical section, analysing the repercussions for architecture of the type of computer laid out in the ‘First Draft’. Second, a description of a design experiment, a sort of information furniture, that tests and exemplifies some of the observations from the first section. This experiment examines the possibilities of an architecture that, moving beyond geometric representations, uses instead the programming of events as its rationale. The structure of this article reflects a methodology in which theoretical formulation and design experiments proceed in parallel. The theoretical investigation proposes concepts that can be tested and refined through design and conversely design work determines and encourages technical, critical and historical research. This relation is dialogical: theoretical investigation is not simply a rationalisation and explanation of earlier design work; inversely, the role of design is not just to illustrate previously formulated concepts. Both design and theorisation are interdependent but autonomous in their parallel development.
keywords	Stored-program, Turing machine, Electronic Discrete Variable Automatic Computer, inscription/incorporation, geometry, sequence, event, information furniture, tangible interface, calm technoloy
series	journal
email
last changed	2019/08/07 14:03

_id	acadia17_562
id	acadia17_562
authors	Soler, Vicente; Retsin, Gilles; Jimenez Garcia, Manuel
year	2017
title	A Generalized Approach to Non-Layered Fused Filament Fabrication
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 562- 571
doi	https://doi.org/10.52842/conf.acadia.2017.562
summary	This research attempts to generalize an approach for large-scale, non-layered spatial extrusion. The methodology consists of splitting a volume, representing any arbitrary geometry, into discrete fragments with a finite number of possible arrangements. These fragments are combined in response to a series of design criteria. A novel application of graph theory algorithms is used to generate a continuous and non-overlapping path through the discrete segments. Physical and mechanical issues related to extrusion technology are explored. The computational model takes into consideration the grade and limitations of different kinds of equipment and material properties to counteract fabrication errors with the goal of speeding up the process and eliminating any need for human intervention. This approach is implemented as a cross-platform software product and programming library that can generate robot programs compatible with multiple industrial robot manufacturers. A physical prototype was fabricated using the seminal Panton Chair as a test model. We conclude that the computational approach is sound and most of the issues encountered were due to the equipment used. This will be addressed in future work.
keywords	design methods; information processing; simulation & optimization; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia17_62
id	acadia17_62
authors	Al-Assaf, Nancy S.; Clayton, Mark J.
year	2017
title	Representing the Aesthetics of Richard Meier’s Houses Using Building Information Modeling
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 62-71
doi	https://doi.org/10.52842/conf.acadia.2017.062
summary	Beyond its widespread use for representing technical aspects and matters of building and construction science, Building information modeling (BIM) can be used to represent architectural relationships and rules drawn from aesthetic theory. This research suggests that BIM provides not only vocabulary but also syntactical tools that can be used to capture an architectural language. In a case study using Richard Meier’s language for single-family detached houses, a BIM template has been devised to represent the aesthetic concepts and relations therein. The template employs parameterized conceptual mass objects, syntactical rules, and a library of architectonic elements, such as walls, roofs, columns, windows, doors, and railings. It constrains any design produced using the template to a grammatically consistent expression or style. The template has been used as the starting point for modeling the Smith House, the Douglas House, and others created by the authors, demonstrating that the aesthetic template is general to many variations. Designing with the template to produce a unique but conforming design further illustrates the generality and expressiveness of the language. Having made the formal language explicit, in terms of syntactical rules and vocabulary, it becomes easier to vary the formal grammar and concrete vocabulary to produce variant languages and styles. Accordingly, this approach is not limited to a specific style, such as Richard Meier's. Future research can be conducted to demonstrate how designing with BIM can support stylistic change. Adoption of this approach in practice could improve the consistency of architectural designs and their coherence to defined styles, potentially increasing the general level of aesthetic expression in our built environment.
keywords	design methods; information processing; BIM; education
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2017_069
id	caadria2017_069
authors	Dritsas, Stylianos, Chen, Lujie and Sass, Lawrence
year	2017
title	Small 3D Printers / Large Scale Artifacts - Computation for Automated Spatial Lattice Design-to-Fabrication with Low Cost Linear Elements and 3D Printed Nodes
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 821-830
doi	https://doi.org/10.52842/conf.caadria.2017.821
summary	The presented process enables users to design, fabricate and assemble spatial lattices comprised of linear stock materials such as round section timber, aluminum or acrylic dowels and complex 3D printed joints. The motivation for the development of this application is informed by the incredible availability of low cost 3D printers which enable anyone to produce small scale artifacts; deploying rapid prototyping to achieve larger scale artifacts than the machine's effective work envelope is a challenge for additive manufacturing; and the trend in the design computing world away highly technical specialized software towards general public applications.
keywords	Design Computation; Digital Fabrication; 3D Printing; Spatial Lattices; Design to Production
series	CAADRIA
email
last changed	2022/06/07 07:55

For more results click below: