Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2017_155
id	caadria2017_155
authors	Cichocka, Judyta Maria, Browne, Will Neil and Rodriguez, Edgar
year	2017
title	Optimization in the Architectural Practice - An International Survey
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 387-396
doi	https://doi.org/10.52842/conf.caadria.2017.387
summary	For several years great effort has been devoted to the study of Architectural Design Optimization (ADO). However, although in the recent years ADO has attracted much attention from academia, optimization methods and tools have had a limited influence on the architectural profession. The aim of the study is to reveal users' expectations from the optimization tools and define limitations preventing wide-spread adaptation of the optimization solvers in the architectural practice. The paper presents the results of the survey "Optimization in the architectural practice" conducted between December 2015 and February 2016 on 165 architectural trainees and practising architects from 34 countries. The results show that there is a need for an interactive multi-objective optimization tool, as 78% respondents declared that a multi-objective optimization is more necessary in their practice than a single objective one and 91% of them acknowledged the need for choice of promising solutions during optimization process. Finally, it has been found that daylight, structure and geometry are three top factors which architects are interested in optimizing.
keywords	Architectural Design Optimization; Optimizaiton Techniques; Generic Solvers; Multi-criteria Decision Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2018_333
id	caadria2018_333
authors	Cupkova, Dana, Byrne, Daragh and Cascaval, Dan
year	2018
title	Sentient Concrete - Developing Embedded Thermal and Thermochromic Interactions for Architecture and Built Environment
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2018.2.545
summary	Historically, architectural design focused on adaptation of built environment to serve human needs. Recently embedded computation and digital fabrication have advanced means to actuate physical infrastructure in real-time. These 'reactive spaces' have typically explored movement and media as a means to achieve reactivity and physical deformation (Chatting et al. 2017). However, here we recontextualize 'reactive' as finding new mechanisms for permanent and non-deformable everyday materials and environments. In this paper, we describe our ongoing work to create a series of complex forms - modular concrete panels - using thermal, tactile and thermochromic responses controlled by embedded networked system. We create individualized pathways to thermally actuate these surfaces and explore expressive methods to respond to the conditions around these forms - the environment, the systems that support them, their interaction and relationships to human occupants. We outline the design processes to achieve thermally adaptive concrete panels, illustrate interactive scenarios that our system enables, and discuss opportunities for new forms of interactivity within the built environment.
keywords	Responsive environments; Geometrically induced thermodynamics; Ambient devices; Internet of things; Modular electronic systems
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaade2018_412
id	ecaade2018_412
authors	Flanagan, Robert
year	2018
title	BIM’s Complexity and Ambiguity - BIM v. Paper Architecture
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 265-270
doi	https://doi.org/10.52842/conf.ecaade.2018.1.265
summary	Architects rely on the graphic language of words and art to bridge intention and design, just as it has always been. Yet, passing an idea or concept from mental imagery to design practice through 2D, 3D, and 4D design filters is especially challenging in BIM technology. Severe limitations hinder or even preclude BIMs use in certain complex design tasks, as identified in the Anti-Box, "The anti-box celebrates the death of the ninety-degree angle- in fact, every angle." (de Graaf 2017). Compatibility and constraints determine the most appropriate uses of BIM software, from designing mundane shopping mall developments to complex architectural engineering feats that stagger the imagination. BIM's main benefit is in the middle when it is creatively employed by professional architects in multi-discipline collaborations, well versed in symbolic representation, of designs conceived of multivalent design factors: narrative, form, function, multi-sensory access, materiality, space, and environment.
keywords	BIM; analog; HIC; Constructivist; Chernikov; photomatch
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2017_142
id	ecaade2017_142
authors	Gönenç Sorguç, Arzu, Kruºa Yemiºcio?lu, Müge, Özgenel, Ça?lar F?rat, Katipo?lu, Mert Ozan and Rasulzade, Ramin
year	2017
title	The Role of VR as a New Game Changer in Computational Design Education
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 401-408
doi	https://doi.org/10.52842/conf.ecaade.2017.1.401.2
summary	With the rapid advances in technology, virtual reality(VR) re-emerged as an affordable technology providing new potentials for virtual learning environments(VLE). Within the scope of this study, firstly a general perspective on potentials of VR to create an appropriate VLE is put forward regarding the potentials related with learning modalities. Then, VR as a VLE in architectural education is discussed and utilization of VR is revisited considering the fundamentals of education as how to enhance skills regarding creativity, furnish students to adopt future skills and how VR can be used to enhance design understanding as well as space perception and spatial relations. It is deliberated that instead of mirroring the real spaces, allowing students to understand the virtuality with its own constituents will broaden the understanding of space, spatial relations, scale, motion, and time both in physical and virtual. The dichotomy between physical and virtual materiality, the potentials and pitfalls in the process of transformation from real/physical to virtual - virtual to real/physical are discussed in relation with the student projects designed in the scope of Digital Design Studio course in Middle East Technical University. It is also shown that VR stimulates different learning modalities especially kinesthetic modality and helping students to develop creativity and metacognition about space and spatial relations.
keywords	computational design education; virtual reality; digital tools; virtual learning environment
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2017_211
id	cf2017_211
authors	Güzelci, Orkan Zeynel
year	2017
title	Investigating the role of Entropy in Design Evaluation Process: A Case Study on Municipality Buildings
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 211-224.
summary	The concept of entropy, which can be used to measure physical disorder, has been rediscovered by Shannon to measure the irregularity in information. Entropy measurements are made by considering one or more factors. Specific features such as color, shape, element type, height, material related with architectural compositions can be considered as factors and the amount of information carried by the building depending on one or more of these factors can be measured. In this study, it is questioned whether there is a relationship between entropy values of municipal building competition projects, which are measured in relation to the factors, and the building is considered successful by the competition jury. In order to conduct this examination, the entropy values of the projects, which respected to the same architectural program and won various awards in the project competitions were calculated. Before making comparisons, measurements were made according to solid-void ratios on the plan layout, the shapes of closed and discrete spaces, and the distribution of functions. A discussion was made on the usability of entropy method in the design phase, which gave solid and precise results according to the results of the comparisons.
keywords	Entropy, Architectural Competition, Municipality Buildings
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_360
id	acadia17_360
authors	L'Huillier, Nicole; Machover, Tod
year	2017
title	Spaces That Perform Themselves: Multisensory Kinetic Environment for Sonic-Spatial Composition
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 360- 365
doi	https://doi.org/10.52842/conf.acadia.2017.360
summary	Building on the understanding of music and architecture as creators of spatial experience, this paper presents a novel way of unfolding music’s spatial qualities in the physical world. Spaces That Perform Themselves arose as an innovative response to the current relationship between sound and space, where we build static spaces to contain dynamic sounds. What if we change the static parameter of spaces and start building dynamic spaces to contain dynamic sounds? This project combines architectural theories with musical mastery and computation to create an environment as kinetically undulant and emotionally varied as music itself. To achieve this, a multisensory kinetic room is built in order to augment our sonic perception through a cross-modal spatial choreography that combines sound, spatial movement, light, color and vibration. By breaking down boundaries between disciplines, the possibilities of a new type of architectural typology that morphs responsively with a musical piece can be explored. As a result, spatial and musical composition can exist as one synchronous entity. Spaces That Perform Themselves seeks to contribute a novel perspective to the discourse on leveraging today’s technology to provide a setting to enrich and augment the way we relate with the built environment. This project’s objective is to enhance our perception and challenge models of thinking by presenting a post-humanistic phenomenological encounter of the world.
keywords	design methods; information processing; education; art and technology; hybrid practices; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2018_210
id	caadria2018_210
authors	Lin, Yuqiong, Zheng, Jingyun, Yao, Jiawei and Yuan, Philip F.
year	2018
title	Research on Physical Wind Tunnel and Dynamic Model Based Building Morphology Generation Method
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 165-174
doi	https://doi.org/10.52842/conf.caadria.2018.2.165
summary	The change of the building morphology directly affects the surrounding environment, while the evaluation of these environment data becomes the main basis for the genetic iterations of the building morphology. Indeed, due to the complexity of the outdoor natural ventilation, multiple factors in the site could be the main reasons for the change of air flow. Thus, the architect is suggested to take the wind environment as the main morphology generation factor in the early stage of the building design. Based on the research results of 2017 DigitalFUTURE Wind Tunnel Visualization Workshop, a novel self-form-finding method in design infancy has been proposed. This method uses Arduino to carry out the dynamic design of the building model, which can not only connect the sensor to monitor the wind environment data, but also contribute the building model to correlate with the wind environment data in real time. The integration of the Arduino platform and the physical wind tunnel can create the possibility of continuous and real-time physical changes, data collection and wind environment simulation, using quantitative environmental factors to control building morphology, and finally achieve the harmony among the building, environment and human.
keywords	Physical wind tunnel; dynamic model; building morphology generation; environmental performance design; wind environment visualization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2017_122
id	ecaade2017_122
authors	Peralta, Mercedes and Loyola, Mauricio
year	2017
title	Performative Materiality - A DrawBot for Materializing Kinetic Human-Machine Interaction in Architectural Space
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 611-618
doi	https://doi.org/10.52842/conf.ecaade.2017.1.611
summary	This paper presents an exploration of movement as a design material to evidence human-machine interaction in an architectural space. An autonomous robotic vehicle with environmental sensory capabilities interacts kinetically with people by recognizing their emotional states from their body postures. A drawing device installed in the vehicle leaves a trace on the floor as a material testimony to the mutual dynamics. The complex yet surprisingly intuitive choreographic interaction of the machine and its social and physical environment blurs the boundaries between drawing, machine, and performance. In general, the project conceptualizes movement as a design material, drawing as a performative action, and social interaction as a physical force, all of which can be enhanced or mediated by digital technologies to produce results with aesthetic value.
keywords	Human-Machine Interaction; Drawing Machine; Performance Design
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_161
id	ecaade2017_161
authors	Pietri, Samuel and Erioli, Alessio
year	2017
title	Fibrous Aerial Robotics - Study of spiderweb strategies for the design of architectural envelopes using swarms of drones and inflatable formworks
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 689-698
doi	https://doi.org/10.52842/conf.ecaade.2017.1.689
summary	This thesis research presents an integrated workflow for the design and fabrication of large-scale architectural envelopes using swarms of drones and inflatable structures as formworks. The work lies at the intersection of architecture, biology and robotics, incorporating generative design with digital fabrication techniques. The proposed approach aims to investigate the tectonic potential of computational systems which encode behavioral strategies inside an agent-based model. It is from local interactions taking place at the micro-scale of complex systems that a new set of architectural tendencies seem to emerge. The authors focused on the strategies developed by colonies of social spiders during the construction of three-dimensional webs. Their communication system and the characteristics of the material structure have been then modelled and translated in a digital environment. A physical fabrication process, in which the simulated agents become drones in a real world environment, was concurrently developed. The goal was to investigate the architectural possibilities given by an autonomous aerial machine depositing fibrous material over inflatable formworks and its potential usefulness in specific sites where overall conditions don't allow traditional construction techniques.
keywords	tectonics; robotics; multi-agent systems; stigmergy; drones; inflatables
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia17_138
id	acadia17_138
authors	Berry, Jaclyn; Park, Kat
year	2017
title	A Passive System for Quantifying Indoor Space Utilization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 138-145
doi	https://doi.org/10.52842/conf.acadia.2017.138
summary	This paper presents the development of a prototype for a new sensing device for anonymously evaluating space utilization, which includes usage factors such as occupancy levels, congregation and circulation patterns. This work builds on existing methods and technology for measuring building performance, human comfort and occupant experience in post-occupancy evaluations as well as pre-design strategic planning. The ability to collect data related to utilization and occupant experience has increased significantly due to the greater accessibility of sensor systems in recent years. As a result, designers are exploring new methods to empirically verify spatial properties that have traditionally been considered more qualitative in nature. With this premise, this study challenges current strategies that rely heavily on manual data collection and survey reports. The proposed sensing device is designed to supplement the traditional manual method with a new layer of automated, unbiased data that is capable of capturing environmental and social qualities of a given space. In a controlled experiment, the authors found that the data collected from the sensing device can be extrapolated to show how layout, spatial interventions or other design factors affect circulation, congregation, productivity, and occupancy in an office setting. In the future, this sensing device could provide designers with real-time feedback about how their designs influence occupants’ experiences, and thus allow the designers to base what are currently intuition-based decisions on reliable data and evidence.
keywords	design methods; information processing; smart buildings; IoT
series	ACADIA
email
last changed	2022/06/07 07:52

_id	sigradi2017_088
id	sigradi2017_088
authors	Elias, Samira; José Nuno Beirão
year	2017
title	As relações determinantes entre Forma Urbana e Urbanidade [The determining relationships between Urban Form and Urbanity]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.611-619
summary	This study aims at identifying the determinant factors that form the condition of urbanity in urban space. A set of urbanistic attributes, based on sampled parcels of the urban network, is used for a quanti-qualitative analysis. Calculations based on these attributes are used to identify the indicators that express the performative qualities of the place, thus allowing the evaluation of the correlation between the typological characteristics of form and the qualitative expression of the urban space. This methodology points to the attributes of the urban form that are most strongly related to the concept of urbanity and that positively influence the quality of urban spaces in the Brazilian context. Finally, we compare our observation with those available in the European literature, already well established in these matters.
keywords	Urban Form, Urbanity, Urban Space, Urban Attributes, SIG;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2017_001
id	caadria2017_001
authors	He, Yi, Schnabel, Marc Aurel, Chen, Rong and Wang, Ning
year	2017
title	A Parametric Analysis Process for Daylight Illuminance - The Influence of Perforated Facade Panels on the Indoor Illuminance
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 417-424
doi	https://doi.org/10.52842/conf.caadria.2017.417
summary	BIM modelling systems and graph-based modelling systems have been widely used in the architecture design process recently. Based on the systems, an alternative approach to study the influence of perforated façade panels on the indoor illuminance by using a parametric performance analysis in a practical architectural project is proposed. The workflow we developed makes the modelling process faster, more accurate, and easier to modify. From the circulation of modelling-to-analysis process, the performance can be compared, feedback can be generated. Accordingly, optimized design can be concluded. This study suggests an analysis method to evaluate the indoor illuminance performance in the early design stages. The simulation is not a conventional typical in-depth one, but a practical method to immediately evaluate the performance for each design alternative and provide guidelines for design modification. Moreover, the first generation of digital modeling programs allow designers to conceive new forms, and allow these forms to be controled and realized. It reacts to the conference theme by presenting a protocol for a digital workflow in the early stage of the design development.
keywords	Daylight illuminance; BIM; parametric sustainability; parametric modelling; facade panels
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2017_032
id	ecaade2017_032
authors	Kepczynska-Walczak, Anetta
year	2017
title	Computation As Design Logic Indicator - The Expo Project Experiment
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 279-288
doi	https://doi.org/10.52842/conf.ecaade.2017.1.279
summary	The city of Lodz is bidding for hosting International EXPO in 2022. The proposed theme is "City Re:Invented". The paper presents the EXPO project experiment conducted at Lodz University of Technology in cooperation with Lodz City Council. The idea was to prepare design proposals for promotional purposes, first in the form of computer visualisations, then as physical scale mock-ups produced in a digital fabrication laboratory. It is planned that the best solutions would be adopted and built in 1:1 scale if Lodz received a nomination. The results of the project are illustrated in the paper by selected examples. The main aim of this study is to examine computational thinking as a design medium. The paper presents background studies in this regard. It also looks into the approach to articulate digital fabrication and robotics as not merely the methods of delivery of a final product but their role in a design process. It deliberates pros and cons of computational design and its influence on creativity. It concludes with a statement that computation may help to construct, reveal, enhance and develop logic in a creation process.
keywords	computational design; parametric modelling; digital fabrication; creativity; EXPO
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2017_076
id	ecaade2017_076
authors	Meex, Elke, Knapen, Elke and Verbeeck, Griet
year	2017
title	A framework to evaluate the architect-friendliness of environmental impact assessment tools for buildings
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 425-434
doi	https://doi.org/10.52842/conf.ecaade.2017.1.425
summary	Legal actions towards a mandatory environmental impact assessment (EIA) of buildings can be expected in the (near) future. Due to the complexity of EIA, software tools will become an indispensable aid in the architectural design process. Especially in early design, feedback on the environmental impact is needed, since early design decisions have a major influence on the final impact of the design. However, most existing EIA tools insufficiently take into account the architect's needs as a user and are especially not suitable for use in early design. Therefore, an evaluation framework with criteria for architect-friendliness of EIA tools, with a specific focus on early design, is developed based on a large-scale survey, interviews and a focus group with practising architects. This framework can be used to evaluate the architect-friendliness of existing EIA tools and as a guidance for the development of new architect-oriented tools.
keywords	user-friendliness; architect-oriented; early design stage; design-support; evaluation framework
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_189
id	ecaade2017_189
authors	Parigi, Dario, Svidt, Kjeld, Molin, Erik and Bard, Delphine
year	2017
title	Parametric Room Acoustic workflows - Review and future perspectives
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 603-610
doi	https://doi.org/10.52842/conf.ecaade.2017.2.603
summary	The paper investigates and assesses different room acoustics software and the opportunities they offer to engage in parametric acoustics workflow and to influence architectural designs. The first step consists in the testing and benchmarking of different tools on the basis of accuracy, speed and interoperability with Grasshopper 3d. The focus will be placed to the benchmarking of three different acoustic analysis tools based on raytracing. To compare the accuracy and speed of the acoustic evaluation across different tools, a homogeneous set of acoustic parameters is chosen. The room acoustics parameters included in the set are reverberation time (EDT, RT30), clarity (C50), loudness (G), and definition (D50). Scenarios are discussed for determining at different design stages the most suitable acoustic tool. Those scenarios are characterized, by the use of less accurate but fast evaluation tools to be used in early design stages, or by more accurate but slower tools for later-stage design stage detailing and delivery phases.
keywords	Geometrical Acoustics; Parametric design; Real-time acoustic analysis; Virtual reality
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2017_015
id	caadria2017_015
authors	Pelosi, Antony
year	2017
title	Where am I? - Spatial Cognition Inside Building Information Models
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 643-652
doi	https://doi.org/10.52842/conf.caadria.2017.643
summary	How do we know what we are looking at while viewing inside Building Information Modelling (BIM) models? Current architectural software typically provides disconnected methods of aiding spatial cognition. There is a strong history of navigation tools developed for controlling our exploration and movement in BIM models, a study by Ruby Darken and John Sibert (1993) found these tools had a strong influence on people's behaviour and understanding of digital space. People perceive and navigate space differently depending on their individual experience with a BIM model, designers and architects build up a detailed cognitive map during the design of a project, while other people have a less detailed comprehension of a project, having only been exposed to select views. This paper will outline key strategies to improve how people comprehend digital space, supporting people in understanding distance and size while inside BIM models. Three design research projects will be presented. The result of the projects define three strategies; Architectural wayshowing, interior-aware transitions, and distance confirmation. Architectural wayshowing needs to be implemented during the design phase, while the remaining two need to be introduced into BIM editing and viewing software.
keywords	Whiteout; wayshowing; spatial cognition; navigation; BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2017_009
id	caadria2017_009
authors	Yang, Xuyou, Koh, Shawn Jyh Shen, Loh, Paul and Leggett, David
year	2017
title	Robotic Variable Fabric Formwork
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 873-882
doi	https://doi.org/10.52842/conf.caadria.2017.873
summary	Casting is one of the most widely used construction techniques. Complex geometries produced via computational design processes are not easily achievable through traditional rigid formwork and are subject to increase material waste. More suitable casting techniques are required to efficiently represent digital design output. This paper presents a variable fabric formwork developed to work in conjunction with a 6-axis robotic arm for casting doubly curved panels based on hyperbolic paraboloid geometry. The variable formwork is designed to be extendable in length and width so it is able to produce a wide range of outcome within a single formwork. The interface established in the workflow allows the physical formwork and digital design to influence each other. This variable fabric formwork reduces construction waste and is a more sustainable method of casting complex geometries.
keywords	Digital fabrication; Robotic production; fabric casting
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac201715203
id	ijac201715203
authors	Agirbas, Asli and Emel Ardaman
year	2017
title	Macro-scale designs through topological deformations in the built environment
source	International Journal of Architectural Computing vol. 15 - no. 2, 134-147
summary	Design studies are being done on contemporary master-plans which may be applied in many locations worldwide. Advances in information technology are becoming the base model of design studies, and these may be more effective than the efforts of humans in the field of architecture and urban design. However, urban morphology variables and constants must be considered while designing contemporary master-plans in the existing built environment. The aims of this study were to extend the use of computer software for different applications and to make a topological work in the regional context. Accordingly, a case study was made using the nCloth simulation tools to create non-Euclidean forms while protecting the road system, which is one of the constant parameters of urban morphology in the built environment.
keywords	Conceptual design, built environment, simulation, contemporary master-plans, urban morphology, topology
series	other
type	normal paper
email
last changed	2019/08/02 08:30

For more results click below: