Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 291

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_054
id	ecaade2017_054
authors	Abramovic, Vasilija, Glynn, Ruairi and Achten, Henri
year	2017
title	ROAMNITURE - Multi-Stable Soft Robotic Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.1.327
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 327-336
summary	The rise in robotics is not only changing fabrication research in architecture but increasingly providing opportunities for animating the materiality of architecture, offering responsive, performative and adaptive design possibilities for the built environment. A fundamental challenge with robotics is its suitability to safe, and comfortable use in proximity to the human body. Here we present the preliminary results of the Roamniture Project, a hybrid approach to developing kinetic architecture based on a combination of rigid and soft body dynamics.
keywords	Kinetic Architecture; Soft Robotics; Soft Architecture; Furniture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	caadria2017_147
id	caadria2017_147
authors	Agirachman, Fauzan Alfi, Ozawa, Yo, Indraprastha, Aswin, Shinozaki, Michihiko, Sitompul, Irene Debora Meilisa, Nuraeni, Ruri, Chirstanti, Augustine Nathania, Putra, Andrew Cokro and Zefanya, Teresa
year	2017
title	Reimagining Braga - Remodeling Bandung's Historical Colonial Streetscape in Virtual Reality
doi	https://doi.org/10.52842/conf.caadria.2017.023
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 23-32
summary	This paper presents the experience of the first phase of remodeling existing historical and colonial district in Bandung, Indonesia, including existing building façade, streetscape and street furniture. Braga Street is chosen as study case because it is a well-known historical street in Bandung with art deco style buildings constructed during Dutch colonial era. By remodeling it, it could help stakeholders to evaluate existing Braga street condition, to test any modification of buildings along the street and to determine specific regulation for the street. In this case, we use Unity3D and Oculus Rift DK2 for remodeling current situation. We gathered feedback from respondents using a questionnaire given after they experienced the model in VR. Many lessons learned from modeling process and respondents' feedback: higher frame rate to make seamless VR experience by having all components on a low poly model and provide smoother movement to prevent visual discomfort. This paper's conclusion gives suggestions for anyone who want to start architecture modeling in virtual reality for the very first time and how to optimize it.
keywords	Virtual reality; historical building; digital reconstruction; streetscape
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
doi	https://doi.org/10.52842/conf.acadia.2017.028
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_085
id	ecaade2017_085
authors	Agustí-Juan, Isolda, Hollberg, Alexander and Habert, Guillaume
year	2017
title	Integration of environmental criteria in early stages of digital fabrication
doi	https://doi.org/10.52842/conf.ecaade.2017.2.185
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 185-192
summary	The construction sector is responsible for a big share of the global energy, resource demand and greenhouse gas emissions. As such, buildings and their designers are key players for carbon mitigation actions. Current research in digital fabrication is beginning to reveal its potential to improve the sustainability of the construction sector. To evaluate the environmental performance of buildings, life cycle assessment (LCA) is commonly employed. Recent research developments have successfully linked LCA to CAD and BIM tools for a faster evaluation of environmental impacts. However, these are only partially applicable to digital fabrication, because of differences in the design process. In contrast to conventional construction, in digital fabrication the geometry is the consequence of the definition of functional, structural and fabrication parameters during design. Therefore, this paper presents an LCA-based method for design-integrated environmental assessment of digitally fabricated building elements. The method is divided into four levels of detail following the degree of available information during the design process. Finally, the method is applied to the case study "Mesh Mould", a digitally fabricated complex concrete wall that does not require any formwork. The results prove the applicability of the method and highlight the environmental benefits digital fabrication can provide.
keywords	Digital fabrication; Parametric LCA; Early design; Sustainability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_62
id	acadia17_62
authors	Al-Assaf, Nancy S.; Clayton, Mark J.
year	2017
title	Representing the Aesthetics of Richard Meier’s Houses Using Building Information Modeling
doi	https://doi.org/10.52842/conf.acadia.2017.062
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 62-71
summary	Beyond its widespread use for representing technical aspects and matters of building and construction science, Building information modeling (BIM) can be used to represent architectural relationships and rules drawn from aesthetic theory. This research suggests that BIM provides not only vocabulary but also syntactical tools that can be used to capture an architectural language. In a case study using Richard Meier’s language for single-family detached houses, a BIM template has been devised to represent the aesthetic concepts and relations therein. The template employs parameterized conceptual mass objects, syntactical rules, and a library of architectonic elements, such as walls, roofs, columns, windows, doors, and railings. It constrains any design produced using the template to a grammatically consistent expression or style. The template has been used as the starting point for modeling the Smith House, the Douglas House, and others created by the authors, demonstrating that the aesthetic template is general to many variations. Designing with the template to produce a unique but conforming design further illustrates the generality and expressiveness of the language. Having made the formal language explicit, in terms of syntactical rules and vocabulary, it becomes easier to vary the formal grammar and concrete vocabulary to produce variant languages and styles. Accordingly, this approach is not limited to a specific style, such as Richard Meier's. Future research can be conducted to demonstrate how designing with BIM can support stylistic change. Adoption of this approach in practice could improve the consistency of architectural designs and their coherence to defined styles, potentially increasing the general level of aesthetic expression in our built environment.
keywords	design methods; information processing; BIM; education
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_199
id	ecaade2017_199
authors	Al-Douri, Ph.D., Firas
year	2017
title	Computational and Modeling Tools - How effectively are Urban Designers and Planners using them Across the Design Development Process?
doi	https://doi.org/10.52842/conf.ecaade.2017.1.409
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 409-418
summary	Literature suggests that despite the increasing range and variety of computational tools and technologies, they have not really been employed for designing as extensively as it might be. This is due in part to the numerous challenges and impediments limiting their effective usage such as the methodological, procedural, and substantive factors and limitations, and skepticism about their impact of usage on the design process and outcome. The gap in our understanding of how advanced computational tools could support the design activities and design decision-making has expanded considerably to become a new area of inquiry with considerable room for the expansion of knowledge. This research is a single-case study that has been pursued in two phases: literature review and survey followed by analysis and discussion of the empirical results. The empirical observations were compared to the theoretical propositions and with results of similar research to highlight the areas and the extent to what the IT tools' usage have influenced the outcome of the design process. The comparison has helped highlight, explain, and justify the mechanism and improvements in the design outcome. Please write your abstract here by clicking this paragraph.
keywords	Computational urban design; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_057
id	ecaade2017_057
authors	Al-Qattan, Emad, Yan, Wei and Galanter, Philip
year	2017
title	Tangible Computing for Establishing Generative Algorithms - A Case Study with Cellular Automata
doi	https://doi.org/10.52842/conf.ecaade.2017.1.347
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 347-354
summary	The work presented in this paper investigates the potential of tangible interaction to setup algorithmic rules for creating computational models. The research proposes a workflow that allows designers to create complex geometric patterns through their physical interaction with design objects. The method aims to address the challenges of designers implementing algorithms for computational modeling. The experiments included in this work are prototype-based, which link a digital environment with an artifact - the physical representation of a digital model that is integrated with a Physical Computing System. The digital-physical workflow is tested through enabling users to physically setup the rules of a Cellular Automata algorithm. The experiments demonstrate the possibility of utilizing tangible interaction to setup the initial cell state and the rules of a CA algorithm to generate complex geometric patterns.
keywords	Physical Computing; Tangible User-Interface; Cellular Automata
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_240
id	ecaade2017_240
authors	Al-Sudani, Amer, Hussein, Hussein and Sharples, Steve
year	2017
title	Sky View Factor Calculation - A computational-geometrical approach
doi	https://doi.org/10.52842/conf.ecaade.2017.2.673
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 673-682
summary	Sky view factor (SVF) is a well-known parameter in urban-climatic studies, but there is a lack of consensus on its effectiveness, especially with regard to the interpretation of changes in urban air temperatures. This led the authors to develop the new concept of the partial sky view factor (SVFp), which showed promise in a previous study. The objective of this study is to save the time associated with manual methods of calculating SVF and SVFp by developing a Rhino-Grasshopper component to quantify them via the hemispheric projection of a 3D model. In addition, a different approach, in terms of a hemispheric projection to calculate SVF, will be introduced by another component, and the pros and cons of each approach are considered. We will name these methods 'Ray Method' and 'Geometrical Method' respectively. The Ray Method has achieved a good balance between accuracy, processing time and urban scale and complexity compared to the Geometrical Method.
keywords	Sky view factor; parametric design; Rhino - Grasshopper; urban morphology; partial Sky view factor
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_175
id	ecaade2017_175
authors	Alfaiate, Pedro and Leit?o, António
year	2017
title	Luna Moth - A Web-based Programming Environment for Generative Design
doi	https://doi.org/10.52842/conf.ecaade.2017.2.511
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 511-518
summary	Current Generative Design (GD) tools require installation and regular updates. On top of that, programs that are created using them are stored as files, which have to be moved and shared manually with others. On the other hand, web applications are accessible using just a web browser and they can also store information remotely, meaning that it does not need to be moved and is easily shared with others. Consequently, GD tools should also be available as web applications to get the same functionality. We present Luna Moth, an IDE for GD available from the web that shows the relationship between a program and its results and integrates into the architect's workflow. Then, we give examples where Luna Moth's features help the architect during the programming process. Finally, we compare Luna Moth's performance with other IDEs, namely, Grasshopper, OpenJSCAD, and Rosetta.
keywords	Generative Design; Web application; Design tool integration;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_72
id	acadia17_72
authors	Alfaiate, Pedro; Caetano, In?s; Leit?o, António
year	2017
title	Luna Moth: Supporting Creativity in the Cloud
doi	https://doi.org/10.52842/conf.acadia.2017.072
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 72-81
summary	Algorithmic design allows architects to design using a programming-based approach. Current algorithmic design environments are based on existing computer-aided design applications or building information modeling applications, such as AutoCAD, Rhinoceros 3D, or Revit, which, due to their complexity, fail to give architects the immediate feedback they need to explore algorithmic design. In addition, they do not address the current trend of moving applications to the cloud to improve their availability. To address these problems, we propose a software architecture for an algorithmic design integrated development environment (IDE), based on web technologies, that is more interactive than competing algorithmic design IDEs. Besides providing an intuitive editing interface which facilitates programming tasks for architects, its performance can be an order of magnitude faster than current algorithmic design IDEs, thus supporting real-time feedback with more complex algorithmic design programs. Moreover, our solution also allows architects to export the generated model to their preferred computer-aided design applications. This results in an algorithmic design environment that is accessible from any computer, while offering an interactive editing environment that integrates into the architect’s workflow.
keywords	design methods; information processing; generative system; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2017_009
id	sigradi2017_009
authors	Alves de Oliveira, Amanda Aline; Tatiana Sakurai
year	2017
title	Fabricação digital e DIY: Pesquisa de soluções para a criação de um mobiliário nômade [Digital fabrication and DIY: Research of solutions for the creation of a nomadic furniture]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.67-74
summary	This article reflects about creation, through the analysis of joints and furniture that are easily assembly and disassembly destined for young people in constant territorial displacement situations. Obtained by digital fabrication in the largest public network of free Fab Labs in the world, which is provided by the City Hall of São Paulo and the maker culture present in these units. Thus, are used, bibliographic and iconographic analysis and drawings for a better understanding of this furniture that had as reference for the analysis the following books: Nomadic Furniture volumes 1 and 2 written by Victor Papanek and James Hennessey.
keywords	Disassembly; Joints; Digital manufacturing; Furniture; Mobility
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_072
id	sigradi2017_072
authors	Amaral de Andrade, Bruno; Camila Marques Zyngier, Camila Marques Zyngier, Ana Clara Mourão Moura
year	2017
title	Roteiro Metodológico para Gamificação do Geodesign Aplicado ao Planejamento Urbano: Por uma Experiência Lúdica no Projeto de Futuros Alternativos para a Cidade com Crianças [Methodological Guide for the Gamification of Geodesign Applied to Urban Planning: For a Ludic Experience on the Project of Alternative Futures for the City with Children]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.491-495
summary	This article aims to present a Methodological Guide to add gamification elements to the Geodesign framework when planning the future of the city, using Geogames such Minecraft, with the participation of children in Tirol, in Brazil. The problematic tackled is related to the challenges that participants of a Geodesign workshop face when co-designing projects as alternative futures for the territory, such as losing engagement and involvement. To support the participants overcome these challenges we incorporate playfulness into the some of the Geodesign workshop phases enhancing geovisualization, collaboration and cognition.
keywords	Geodesign; Geogames; Geovisualization; Participatory Planning; Chindren’s Design.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia17_92
id	acadia17_92
authors	Anzalone, Phillip; Bayard, Stephanie; Steenblik, Ralph S.
year	2017
title	Rapidly Deployed and Assembled Tensegrity System: An Augmented Design Approach
doi	https://doi.org/10.52842/conf.acadia.2017.092
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 92-101
summary	The Rapidly Deployable and Assembled Tensegrity (RDAT) project enables the efficient automated design and deployment of differential-geometry tensegrity structures through computation-driven design-to-installation workflow. RDAT employs the integration of parametric and solid-modeling methods with production by streamlining computer numerically controlled manufacturing through novel detailing and production techniques to develop an efficient manufacturing and assembly system. The RDAT project emerges from the Authors' research in academia and professional practice focusing on computationally produced full-scale performative building systems and their innovative uses in the building and construction industry.
keywords	design methods; information processing; AI; machine learning; form finding; VR; AR; mixed reality
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2017_038
id	ecaade2017_038
authors	Asanowicz, Aleksander
year	2017
title	Parametric design - Tool, medium or new paradigm?
doi	https://doi.org/10.52842/conf.ecaade.2017.2.379
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 379-386
summary	Parametric design is an emerging research issue in the design domain. However, discussions about the creative process in parametric design are limited. What is more, despite the passing of 57 years of parametric design's existence we still do not know what parametric design is. Is it a simple tool, which is useful in some kind of optimization of the architectural form, or it is a medium, which helps architects develop unexpected solutions, and perhaps this is already a new design paradigm? The presented paper will contain general considerations relating to the nature of parametric design, the history of which starts in 1960, when D.T. Ross has formulated the thesis that our main objective is to formulate constrains and all needed parameters of the solved problem.Please write your abstract here by clicking this paragraph.
keywords	optimisation; parametric design; design tool; design media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_133
id	ecaade2017_133
authors	Ashrafi, Negar and Duarte, José Pinto
year	2017
title	A shape-grammar for double skin facades - A basis for generating context sensitive facades solution
doi	https://doi.org/10.52842/conf.ecaade.2017.2.471
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 471-476
summary	Double skin façade (DSF) is considered one of the best envelope systems in terms of energy efficiency. However, designing an energy efficient DSF system depends on different factors, such as climate, DSF shape and how the air flows in that system. This study presents a methodology to assist design decisions regarding the DSFs shapes. For this purpose, shape grammars was used as a generative design system to generate alternative DSF shape designs. Results of this study can be integrated with an energy simulation tools to calculate the energy demand of each design and consequently design the most efficient DSF system for each context.
keywords	building envelope design; double skin façade; generative design system; shape grammars
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2017_182
id	caadria2017_182
authors	Austin, Matthew
year	2017
title	The Other Digital - What is the Glitch in Architecture?
doi	https://doi.org/10.52842/conf.caadria.2017.551
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 551-559
summary	This paper will discuss and investigate the issues with the concept of 'glitch' in architecture. There are currently two definitions that sit in a symbiotic relationship with each other; Moradi's (2004) and Menkman's (2011). This paper will explore the implications of these two approaches, while investigating the possibility of a third, unique definition (the encoded transform), and what effect they have on the possibility for a 'glitch architecture'. The paper will then focus on the glitches' capacity to be disruptive within the design process. In the context of architecture, it has been previously argued that the inclusion of glitches within a design process can easily create a process that does not 'converge' to a desired design outcome, but instead shifts haphazardly within a set of family resemblances (Austin & Perin 2015). Further to this, it will be revealed that this 'divergent' quality of glitches is due to the encoded nature of architectural production.
keywords	Glitch aesthetics; Theory; Algorithmic Design; Process.
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: