Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 573

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2017_069
id	sigradi2017_069
authors	Briones Lazo, Carolina; Carolina Soto Ogueta
year	2017
title	La enseñanza de BIM en Chile, el desafío de un cambio de enfoque centrado en la metodología por sobre la tecnología. [BIM education in Chile, the challenge of a shift of focus centered on methodology over technology.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.470-478
summary	This article presents the level of adoption of BIM in Chile referring to recent studies carried out in the country, demonstrating that there has not been a significant increase in the use of this methodology by the industry. According to the analysis of international cases on educational frameworks, the authors argue that the development of a national education strategy for BIM with a focus on defining BIM capabilities required to assume the national mandate 2020, along with promoting collaborative work environments and active learning methodologies would be very beneficial.
keywords	Building Information Modelling; Metodología BIM; Adopción de BIM; Estrategia de enseñanza de BIM.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_077
id	sigradi2017_077
authors	Soto Muñoz, Jaime; Jesús Pulido Arcas, Rodrigo García Alvarado, Gastón Arias Aravena
year	2017
title	La implementación de la Metodología Building Information Modeling (BIM) para edificios existentes en Chile [La implementación de la Metodología Building Information Modeling (BIM) para edificios existentes en Chile]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.528-533
summary	BIM technology is currently being implemented in the construction industry, though it is still underdeveloped in relation to Facility Management (FC) of extant buildings. There is a strong potential for future development due to the visualization and data analysis capabilities of this technology, amongst others (Becerik-Gerber, Jazizadeh, Li, & Calis, 2012). This research investigates how BIM can be implemented in existing buildings currently in operation. Using a public facility at the University of Bio-Bio as a case study, conclusions are drawn with respect the capabilities of BIM in order to optimize maintenance and operation of existing buildings.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2017_005
id	sigradi2017_005
authors	Vargas Cubillos, Julián; Gilfranco Medeiros Alves
year	2017
title	El proceso proyectivo colaborativo en BIM: Aproximaciones a partir de la semiótica de C. S. Peirce [The collaborative projective process in BIM: Approaches from the semiotics of C. S. Peirce]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.39-44
summary	This paper studies the process of conception in BIM architecture, using concepts of Peircian semiotics, in order to apply it in the design oriented to the resilience. There are three ways of designing in Revit Architecture software: (i) the conceptual mass, which demonstrates an abductive-iconic type of reasoning and a stereotomic process. (ii) Object-based modeling, which demonstrates a deductive/inductive-symbolic and a tectonic procedure and (iii) collaborative modeling, which manages to initiate a parallel process between different professionals and the community. These processes are understood in a semiotic relationship, in which are present signs and reasoning of different hierarchies.
keywords	Process; BIM; Semiotics; Resilience; Collaborative
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2017_014
id	sigradi2017_014
authors	Bonilla Vallejo, Mario Andres; Denise Mônaco dos Santos, Douglas Lopes de Souza, Pena Martinez, Andressa Carmo
year	2017
title	La práctica de la colaboración en los procesos digitales de diseño: Investigación - Acción [The practice of collaboration in digital processes design: Investigation action]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.106-113
summary	This paper aims to present reflections on the practice of collaboration in the project JAM! Diálogos emergentes e processos digitais de projeto. For this, we analyzed the interaction and communication of a geographically distributed work team in Brazil, through a research - action methodology. Here be considered as main aspects the digital tools and technologies that support the development of remote architectural projects. Therefore, advances in the CSCW area taken into account for such analysis. This work linked to a master's research that be carry out at the Federal University of Viçosa
keywords	Process design; Collaboration; Groupware; Collective intelligence.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_042
id	sigradi2017_042
authors	Loyola, Mauricio; Pablo Domínguez, Diego Rossel, Nicolás Madariaga, Constanza Montiel
year	2017
title	GypsumFold: Un método para el plegado de paneles de yeso en ángulos variables para la fabricación de productos arquitectónicos [GypsumFold: A method for folding gypsum panels at varying angles for the manufacture of architectural products]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.287-292
summary	Este articulo propone un método para fabricar elementos constructivos con yeso-cartón en ángulos variables una manera fácil, rápida, precisa y económicamente eficiente. Su funcionamiento se basa en el diseño y manufactura automatizada de ranuras fresadas en planchas de yeso-cartón utilizando una técnica innovadora denominada “escalonamiento”, la cual permite obtener cualquier ángulo de pliegue usando un mismo procedimiento y herramientas estándar.
keywords	CAD/CAM; Digital Fabrication; Gypsum Board; Complex Geometries
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_066
id	sigradi2017_066
authors	Cabizuca Oliveira, Ludmila; José Ripper Kós
year	2017
title	Modelos BIM como estratégia de valorização profissional [BIM Models as a Strategy for Professional Valuation]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.448-452
summary	This article discusses the Brazilian architecture professional devaluation, identifying factors that contribute to a process of disqualification. It provides the basis for possible reflections by architecture councils. Authors pointed out that the BIM evolution would lead to unexplored fields, such as standards to increase project quality. The study suggests the development of an instrument that certifies services, methodologies and teams positively positioned in the contemporary demands of the AEC sector. By incorporating existing standards, the technology is justified as the basis, allowing this quality to be extended to contractors, reinforcing the multidisciplinary character with its involved professional’s responsibility.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_037
id	sigradi2017_037
authors	Cenci, Laline; Rodreigo Garcia Alvarado
year	2017
title	Modelado paramétrico y fabricación digital para la concepción de edificios de museo ambientalmente adecuados para el clima subtropical húmedo de Brasil. [Parametric modeling and digital manufacturing for the conception of museum buildings environmentally suitable for the subtropical wetland climate of Brazil.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.257-261
summary	Museums exhibit a growing development in the world, promoting buildings with significant expressions. Nevertheless, the relation of the building and its environmental performance is fundamental in the conception of new buildings. The problem originates in the early stages of design, where it is not possible to evaluate it environmentally. The methodology uses three art museum buildings in the humid subtropical climate of Brazil, whose geometries are completely different. After analyzing and relating its performance to its environmental and geometric characteristics a parametric modeling tool is proposed and the digital manufacture as a product of the process has been carried out.
keywords	Parametric Modeling; Digital Manufacturing; Art museums; Environmental Compatibility; Subtropical Humid Climate of Brazil.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_003
id	sigradi2017_003
authors	Dávila, Mariolly; González Alayón, Pedro Wightman
year	2017
title	Patrimonio moderno y realidad aumentada e inmersiva: De la valorización a la reconstrucción virtual. Caso: Coliseo Humberto Perea, Barranquilla, Colombia [Modern heritage and augmented and inmersive reality: from valuation to virtual reconstruction. Case: Coliseum Humberto Perea, Barranquilla, Colombia]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.26-32
summary	As the result of the demolishing decision of Humberto Perea was generated, a Seminar- Workshop on CG at Universidad del Norte with the purpose of evaluate his heritage´s modern movement in Barranquilla. The Seminar´s objective was to design a methodology for documenting the building through technologies: CG and mixed realities. The methodology contents two parts; First, the building incorporated into the context with previous to the demolition and with architectural survey. And second part was developed with the Seminar - Workshop and Immersive Virtual Reality. As conclusion was demonstrated that any heritage building can be documenting to be used by researchers.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_079
id	sigradi2017_079
authors	Espina Bermúdez, Jane; Eugenia Di Bella
year	2017
title	Información, procesamiento y visualización de territorios complejos: Una aproximación desde las Tecnologías de Información para la enseñanza de la Arquitectura y Urbanismo [Information, processing and visualization of complex territories: An approach from Information Technologies for Architecture and Urbanism teaching]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.541-548
summary	This paper states a theoretical-conceptual proposal about recording, processing and visualization of the components about the complex territory "Laguna de Sinamaica" and its stilt-house añú habitat in Zulia state. Digital technologies will collaborate in planning and designing the reconstruction of territory’s temporary scenery in future interventions. Strategies for creativity, interactivity and communication in the design process and in reading comprehension of technical discourse of software in English are stated. Theoretical and methodological perspectives are applied in order to approach the study. Results: conceptualization and characterization of territory, habitat and housing; systematization of data and information of lake system.
keywords	Information, Territory, Habitat, Digital Technologies, Lagoon System
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_089
id	sigradi2017_089
authors	Fernández Gallardo, María Luz
year	2017
title	Estudio para la elaboración de un material compuesto por fibra de mimbre (salix viminalis) y acetato de polivinilo con propiedades auto-estructurantes [Study for the manufacturing of a material composed by wicker fiber (salix viminalis) and polyvinyl acetate with self structuring properties]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.620-625
summary	Experimental investigation focused on the creation of a procedural method for the manufacturing of a material made by wicker fiber and reinforced by the fixation adhesive Polyvinyl Acetate (PVA), with the objective of increasing the natural plasticity of wicker and generate self-supporting parts which lack of an internal or external structure that may give them their final morphology. Furthermore, it aims to generate new knowledge that may improve the productive techniques and contribute to the sustainable micro-industrialization of the material.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_013
id	sigradi2017_013
authors	Fernández González, Alberto
year	2017
title	Modelamiento visual de conceptos espaciales en Taller de Diseño Arquitectónico 1-2 [Visual spatial concepts modeling at Architectural Design Studio 1-2]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.100-105
summary	This research presents results of visual modeling strategies introduction, associated with spatial ideas, being all referred to the work done in the Architectural Design Studio 1-2 at the University of Chile. The applied project methodology seeks to lay the foundations of an incremental draft strategy, which allows a smooth transition between the analog conceptual stages to a digital inclusion of similar criteria of visual modeling in early stages of architectural design. That methodology allows to students to decode their concepts to digital shapes, using point, lines, and triangles as analog-digital translators for each proposal.
keywords	Architectural design; Translation; Shapes; Analog to Digital
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_023
id	sigradi2017_023
authors	Folga, Alejandro; Espinosa Claudia
year	2017
title	El fotomontaje en sección como herramienta del proyecto de paisaje [The photomontage in section as a tool of the landscape project]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.168-173
summary	In landscape design a vertical section is a representation that, comparatively, is less used than in architecture. However, given the current complexity of urban intervention, the section is a graphical tool of analytical and communicative interest to complement the information that plants give us. The paper is structured in three parts: the first presents the theoretical-conceptual framework of the research, in the second, some notable examples are studied, and in the third, a photomontage exercise is carried out in a course with students of landscaping.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_021
id	sigradi2017_021
authors	Frogheri, Daniela; Fernando Meneses-Carlos, Alberto T. Estévez
year	2017
title	Arquitectura sensible en relación con el contexto: Mimesis y proxémica como formas de comunicación. [Sensitive Architecture in relationship with the context: Mimesis and proxemics as a kind of communication.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.153-160
summary	This paper presents a research of the relationship between architecture and context applied to the development of a sensitive pavilion that receives data from live sensors, responds and adapts in real time, generating a biunivocal resilience between the architectural object and the context. The research is developed through the integration between morphogenesis processes, parametric-generative design, Arduino, sensors, input and output devices that connect data and matter, programming and digital fabrication.The result is a pavilion designed and fabricated digitally, that receives data of the environment in real time through sensors and that reacts through changes of color and movements.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_062
id	sigradi2017_062
authors	Lima da Silva, Juliano; Andréa Quadrado Mussi, Lauro André Ribeiro, Thaísa Leal da Silva
year	2017
title	Programação em plataforma BIM e a Norma de Desempenho Brasileira: Desenvolvimento de uma aplicação para estimativa de performance acústica em projetos arquitetônicos [BIM platform programming and Brazilian Performance Standard: Development of an application to estimate acoustic performance in architectural design]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.423-428
summary	The Brazilian Performance Standard (NBR 15.575/2013 – Housing Buildings – Performance) is changing the design process of residential buildings, imposing new acoustic performance criteria. In this Context, the present paper proposes the programming of a Revit plug-in for verifying sound insulation of walls between environments, collecting information of the building’s model from a parameter database, calculating values of the elements’ sound reduction index and allowing to ponder constructive systems’ performance. The application aims to amplify productivity of designers and to provide greater control over technological solutions, assisting in the compliance with performance criteria.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_061
id	sigradi2017_061
authors	Lobos Calquín, Danny Alfredo; Lorena Del Pilar Silva Castillo
year	2017
title	BIM y CES. Dos agendas de gobierno unidas a través de las Tecnologías Digitales [BIM and CES. Two government agendas brought together through ICT tools]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.417-422
summary	The paper discusses the intersection of two main agendas for Chilean governments that are BIM (Building Information Modeling) and BEAM (Building Environmental Assessment Methods). It shows the state-of-the-art in both fields in Chile as well as in the world, it discusses some previous efforts of integration; it found some new opportunities for collaboration and finally proposes a new framework that brings together BIM and BEAM. The development of the method includes BIM Models, databases and spread sheets for building energy Certification, it finally provides a semi-automatic environment where architects model their design in BIM and this Information is used as an input to the certification process. Potentials and risk of this method are discussed.
keywords	BIM (Building Information Modeling); BPS (Building Performance Simulation); BEAM (Building Environmental Assessment Methods); Architectural Design; Interoperability.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_026
id	sigradi2017_026
authors	Martini, Sebastián; Mauro Chiarella
year	2017
title	Didactica Maker. Estrategias colaborativas de aprendizaje STEM en Diseño Industrial. [Makers Didactics. STEM Learning collaborative strategies in Industrial Design.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.186-192
summary	In this presentation will be exposed a work of verification of the research carried out for the Master's degree in University Teaching about the implications of Maker Culture in the teaching-learning processes into Industrial Design. From this exploration, we are interested in proposing an exercise for the subject IMD-DI, that develop an action process where it is possible catalyze the educational advantages of Maker Culture, STEAM education and the disciplinary transversality within a strategy on problem-based learning as a way of approach and knowledge generation.
keywords	Maker culture; Makerspace; STEM; PBL; Collaborative working
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_094
id	sigradi2017_094
authors	Nacimento Firme, Eduardo; Max Lira Veras Xavier de Andrade
year	2017
title	Projeto Colaborativo, Realidade Vitual e BIM: Uma experiencia de participação dos clientes nas decisões dos projetos de arquitetura [Collaborative project, Virtual Reality and BIM: An experience of customer participation in the decisions of architectural projects]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.651-657
summary	This paper presents an undergraduate work, still under development that discusses and implements a virtual reality based collaboration system to be used during the design stage of the architectural project. Tests are currently being developed to define the form of interaction in an immersive virtual environment. This system will enable the client to be immersed in a virtual environment and be able to change it according to their needs and tastes, effectively participating in the project process.
keywords	Collaborative design; Virtual Reality; BIM; Immersive virtual environments, Architecture Design.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2017_051
id	sigradi2017_051
authors	Quitral Zapata, Francisco Javier; Luis Felipe González Böhme
year	2017
title	Máquina CNC de 7 ejes para cortar poliestireno expandido (EPS) obteniendo superficies de doble curvatura en una sola pasada. [7-axis CNC machine to cut expanded polystyrene (EPS) for obtaining double-curved surfaces in a single pass.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.352-357
summary	We present a novel CAD/CAM apparatus and method for single-pass cutting of double-curved expanded polystyrene formworks. A rationalization approach was implemented using generic solvers in a popular free visual programming environment integrated into a well-known commercial CAD software, which allows finding elastica curve sections for processing double-curved NURBS surfaces. This procedure allows us to convert bending curves geometry into G-code coordinates for numerically controlling a flexible cutting hot-blade. A prototype 7-axis machine was experimentally validated in a series of cutting processes of EPS formworks to build a double-curved concrete pony wall.
keywords	Hot-blade cutting, Double-curved surfaces, Single-pass cutting, Expanded polystyrene formworks, Computer-aided manufacturing
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2017_012
id	sigradi2017_012
authors	Ramírez, Rodrigo
year	2017
title	Guemil: Diseño y medición de significados de un set de íconos para representar el riesgo y la emergencia [Guemil: Design and measuring on meanings of a set of icons to represent risk and emergency]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.93-99
summary	Oriented to discuss about how information contributes to resilience, this paper presents a research-based project that integrates design and performance measuring. This project is Guemil, an open source initiative aimed to represent risk and emergency contexts through icons. As a simple solution with a focus on risk management cycle + user experience, the set of icons is designed around a ‘before > during > after’ concept. To verify performance about interpretation from users, icons are currently being tested worldwide. Reflections from the process and future projections are presented as conclusion.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2017_027
id	sigradi2017_027
authors	Rendón Sallard, Mario Yadir; Rosa María Mendoza Robles, Fernando Saldaña Córdoba
year	2017
title	Calidad en Producción de Maquetas y Tutoriales en Línea [Scale Models Quality Production and Online Tutorials]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.193-197
summary	The university student faces multiple challenges to acquiring knowledge for their degrees. We study the ways the architecture student at Universidad de Sonora overcomes such difficulties, in a process of academic resilience, through the use of a video tutorial repository covering topics related to architecture scale model fabrication, among other study materials. This repository meets the demand for web-based, Spanish-language study materials. It was tested in terms of usefulness and acceptability: video tutorials were not only considered helpful by the students, but a handy tool when attempting to learn new abilities and knowledge, or reinforce those they already acquired.
keywords	Maquetas; Tutoriales; Arquitectura; Educación Resiliente
series	SIGRADI
email
last changed	2021/03/28 19:59

For more results click below: