Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2017_118
id	caadria2017_118
authors	Kocabay, Serkan and Alaçam, Sema
year	2017
title	A Multi-Objective Genetic Algorithm Framework for Earlier Phases of Architectural Design - A Case Study
doi	https://doi.org/10.52842/conf.caadria.2017.293
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 293-302
summary	This paper presents an algorithmic framework proposal for implementation of a multi-objective genetic algorithm (MOGA) in architectural design process. Different than the previous studies, we introduce a dynamic and extendible modular framework for multiple objectives. The objective modules with different fitness functions are connected simultaneously in the Rhino/Octopus interface, after multiplication with a constant value or a variable. In this study, we discuss the potentials and limitations of MOGA in 3D form generation, implications of MOGA in a case study and the qualitative and quantitative changes in relation to the change of constant value/ the impact ratio of competing objectives. The outcomes of the case study are investigated based on its potentiality in providing feedback in the earlier phases of decision processes in design.
keywords	multi-objective; genetic algorithm; architectural design process; case study
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2017_175
id	caadria2017_175
authors	Smolik, Andrei, Chang, Tengwen and Datta, Sambit
year	2017
title	Prototyping Responsive Carrier-Component Envelopes
doi	https://doi.org/10.52842/conf.caadria.2017.521
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 521-528
summary	The capacity to respond dynamically to changes in external and internal environments open new possibilities in the interaction between buildings, humans and the environment. The development of dynamic envelopes requires the integration of various systems- geometric, structural, and electronic-responsive and their interaction. The paper reports the results from the "Dynamic Cloud Project" and presents a design and fabrication methodology to integrate kinetic behaviour with material constraints; the simulation of responses by connecting components with programmable input and behaviour. The paper presents a modular, component-driven systems construction based on a carrier-component surface geometry called responsive carrier-component envelope (RCCE) and describes the modelling, fabrication and assembly of such envelopes. The protocols developed in the project are reported in the paper and highlight the opportunities and consequences of how local components relate to the whole carrier envelope with multiple constraints and scale considerations. The results of the prototyping and experimentation with this project are reported in the paper. The paper also discusses future applications of the research and outlines new possibilities and design opportunities in prototyping responsive carrier-component envelopes.
keywords	Dynamic envelope; carrier component mesh; sensor interaction; interactive architecture; digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia17_72
id	acadia17_72
authors	Alfaiate, Pedro; Caetano, In?s; Leit?o, António
year	2017
title	Luna Moth: Supporting Creativity in the Cloud
doi	https://doi.org/10.52842/conf.acadia.2017.072
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 72-81
summary	Algorithmic design allows architects to design using a programming-based approach. Current algorithmic design environments are based on existing computer-aided design applications or building information modeling applications, such as AutoCAD, Rhinoceros 3D, or Revit, which, due to their complexity, fail to give architects the immediate feedback they need to explore algorithmic design. In addition, they do not address the current trend of moving applications to the cloud to improve their availability. To address these problems, we propose a software architecture for an algorithmic design integrated development environment (IDE), based on web technologies, that is more interactive than competing algorithmic design IDEs. Besides providing an intuitive editing interface which facilitates programming tasks for architects, its performance can be an order of magnitude faster than current algorithmic design IDEs, thus supporting real-time feedback with more complex algorithmic design programs. Moreover, our solution also allows architects to export the generated model to their preferred computer-aided design applications. This results in an algorithmic design environment that is accessible from any computer, while offering an interactive editing environment that integrates into the architect’s workflow.
keywords	design methods; information processing; generative system; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:54

_id	caadria2017_085
id	caadria2017_085
authors	Lee, Yong-Ju, Kim, Mi-Kyoung and Jun, Han-Jong
year	2017
title	Green Standard for Energy and Environmental Design - The Development of an Assessment System Based on a Green BIM Template
doi	https://doi.org/10.52842/conf.caadria.2017.623
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 623-632
summary	To construct a building that meets the requirements of certification in terms of environmental friendliness, there must be a process that considers the certification criteria from the initial design phase. However, there are numerous complicated task performance procedures to analyse many required items in detail as well as perceive and apply the data requirements efficiently. Currently, Building Information Modeling (BIM) is gaining attention as a solution for environmental problems in architecture. BIM shows precisely how a virtual building is modelled in the real world, thereby providing an objective information and analysis through a simulation. However, the result values of BIM library or modelling may turn out differently as a result of the work environment of designers or users that is not standardized. Therefore, this study applies the modelled and extracted BIM data using the template and library established in the BIM add-in planning and design phase to review in advance the Green Standard for Energy and Environmental Design (G-SEED) assessment by item and manual input of users with the BIM-based (add-in) G-SEED assessment system, thereby providing support to enable users to establish specific strategies in designing green buildings.
keywords	GBT; G-SEED; BIM System; BIM Add-in; Apartment
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2017_129
id	ecaade2017_129
authors	Li, Qinying and Teng, Teng
year	2017
title	Integrated Adaptive and Tangible Architecture Design Tool
doi	https://doi.org/10.52842/conf.ecaade.2017.1.619
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 619-628
summary	In this paper, we identified two majority issues of current CAAD development situating from the standpoint of CAAD history and the nature of design. On one hand, current CAAD tools are not adaptive enough for early design stage, since most of CAAD tools are designed to be mathematical correct. as we conducted a detailed survey of CAAD development history, we find out that most of the techniques of Computer-Aided Design applied into architecture are always adopted from engineering track. On other hand, the interaction between Architects/Designer and CAAD tools needs to be enhanced. Design objects are operated by 2d based tools such as keyboard, mouse as well as monitors which are less capable of comprehensively representing physical 3D building objects. In addition, we proposed a working in progress potential solution with HCI approaches to fix these issues. We summarize that , the prototype proved that architects and designers could benefit from utilizing adaptive and tangible design tools, especially during massing studies in the early phases of architectural design.
keywords	CAAD development,; Human Computer Interaction; Tangible User Interfaces; Design Tool development; Design Process
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_244
id	ecaade2017_244
authors	Chaltiel, Stephanie, Bravo, Maite and Chronis, Angelos
year	2017
title	Digital fabrication with Virtual and Augmented Reality for Monolithic Shells
doi	https://doi.org/10.52842/conf.ecaade.2017.2.211
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 211-218
summary	The digital fabrication of monolithic shell structures is presenting some challenges related to the interface between computational design and fabrication techniques, such as the methods chosen for the suitable parametrization of the geometry based on materiality characteristics and construction constrains, the digital optimization criteria of variables, and the translation of the relevant code used for digital fabrication. Specifically, the translation from the digital to the physical when a definite materiality appears during the digital fabrication process proves to be a crucial step, which is typically approached as a linear and predetermined sequence. This often-difficult step offers the potential of embedding a certain level of interactivity between the fabricator and the materialized model during the fabrication process in order to allow for real time adjustments or corrections. This paper features monolithic shell construction processes that promote a simple interface of live interaction between the fabricator and the tool control during the digital fabrication process. The implementation of novel digital and physical methods will be explored, offering the possibility of being combined with automated fabrication actions controlled by real time inputs with virtual reality [VR] influenced by 3d scanning and 3d CAD programs, and the possibility of incorporating augmented reality [AR].
keywords	virtual reality; augmented reality; monolithic shells
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2017_051
id	cf2017_051
authors	Chen, Kian Wee; Janssen, Patrick; Norford, Leslie
year	2017
title	Automatic Parameterisation of Semantic 3D City Models for Urban Design Optimisation
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 51-65.
summary	We present an auto-parameterisation tool, implemented in Python, that takes in a semantic model, in CityGML format, and outputs a parametric model. The parametric model is then used for design optimisation of solar availability and urban ventilation potential. We demonstrate the tool by parameterising a CityGML model regarding building height, orientation and position and then integrate the parametric model into an optimisation process. For example, the tool parameterises the orientation of a design by assigning each building an orientation parameter. The parameter takes in a normalised value from an optimisation algorithm, maps the normalised value to a rotation value and rotates the buildings. The solar and ventilation performances of the rotated design is then evaluated. Based on the evaluation results, the optimisation algorithm then searches through the parameter values to achieve the optimal performances. The demonstrations show that the tool eliminates the need to set up a parametric model manually, thus making optimisation more accessible to designers.
keywords	City Information Modelling, Conceptual Urban Design, Parametric Modelling, Performance-Based Urban Design
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2017_002
id	caadria2017_002
authors	Haeusler, M. Hank, Muehlbauer, Manuel, Bohnenberger, Sascha and Burry, Jane
year	2017
title	Furniture Design Using Custom-Optimised Structural Nodes
doi	https://doi.org/10.52842/conf.caadria.2017.841
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 841-850
summary	Additive manufacturing techniques and materials have evolved rapidly during the last decade. Applications in architecture, engineering and construction are getting more attention as 3D printing is trying to find its place in the industry. Due to high material prices for metal 3d printing and in-homogenous material behaviour in printed plastic, 3D printing has not yet had a very significant impact at the scale of buildings. Limitations on scale, cost, and structural performance have also hindered the advancement of the technology and research up to this point. The research presented here takes a case study for the application of 3D printing at a furniture scale based on a novel custom optimisation approach for structural nodes. Through the concentration of non-standard geometry on the highly complex custom optimised nodes, 3D printers at industrial product scale could be used for the additive manufacture of the structural nodes. This research presents a design strategy with a digital process chain using parametric modeling, virtual prototyping, structural simulation, custom optimisation and additive CAD/CAM for a digital workflow from design to production. Consequently, the digital process chain for the development of structural nodes was closed in a holistic manner at a suitable scale.
keywords	Digital fabrication; node optimisation; structural performance; 3D printing; carbon fibre.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	cf2017_349
id	cf2017_349
authors	Kim, Eonyong; Kim, Kibum; Choo, Seungyeon; Ryu, Jikeun
year	2017
title	Rule-based Security Planning System for Practical Application
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 349-359.
summary	Security planning is a vital part of the operation and management phase in a building’s life cycle. Ideally, this will be addressed during the building design phase. However, reality often differs from this ideal. In the real world, information such as floor plans tend to insufficiently describe or imperfectly match physical buildings, and must be surveyed and re-worked during security planning. Because of this, security companies require two kinds of staff: those in the security business and those in charge of planning, including floor plan verification. This research focused on creating an efficient way to help staff in this work environment develop a system of security planning for buildings and facilities using a rule-based approach in a tailormade CAD system. In this research, we developed a new 3D CAD system for desktops and mobile devices, which specializes in security planning using a game-engine. To avoid errors during security planning, a rule-based check system was developed and integrated into the CAD system. The rule-set of this rule base was built from the security planning manual, including guidelines on equipment layout and wiring in various situations, which could then be used in the development of an automated check. This research describes the method of system development and final results.
keywords	Security Planning, Operation and Management, Rule Base, BIM, CAD
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2017_017
id	caadria2017_017
authors	Park, Hyejin, Lee, Seunghyun, Kim, Eonyong and Choo, Seungyeon
year	2017
title	A Proposal for Building Safety Diagnosis Processes using BIM-based Reverse Engineering Technology
doi	https://doi.org/10.52842/conf.caadria.2017.673
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 673-682
summary	Recently, the aging of buildings is accelerating around the world. In line with this, architectural structures constructed long time ago require life extension and ongoing management and protection for improvement, because they are too deteriorated. In particular, since structural safety inspection and analysis in building is very important, 'DFS (Design For Safety)'system has been introduced and conducted at the national level in Korea for the whole building life cycle management system encompassing the entire design, work commencement, construction, and completion stages. However, we do not have a system ranging from repair and reinforcement work plans in doing safety design, structural inspection and analysis to ongoing safety inspection. Therefore, it is necessary to establish a system to produce and share integrated information and conduct a research to manage architectural structure across the whole life cycle. Accordingly, this study aims to propose BIM-based reverse engineering technology for generating a safety management model based on laser scanner, verify the investigation items to be utilized of the design when building safety, and seek ways to utilize them for safety design.
keywords	BIM; reverse engineering; building safety diagnosis; laser scanning; design for safety
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2023_259
id	ecaade2023_259
authors	Sonne-Frederiksen, Povl Filip, Larsen, Niels Martin and Buthke, Jan
year	2023
title	Point Cloud Segmentation for Building Reuse - Construction of digital twins in early phase building reuse projects
doi	https://doi.org/10.52842/conf.ecaade.2023.2.327
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 327–336
summary	Point cloud processing has come a long way in the past years. Advances in computer vision (CV) and machine learning (ML) have enabled its automated recognition and processing. However, few of those developments have made it through to the Architecture, Engineering and Construction (AEC) industry. Here, optimizing those workflows can reduce time spent on early-phase projects, which otherwise could be spent on developing innovative design solutions. Simplifying the processing of building point cloud scans makes it more accessible and therefore, usable for design, planning and decision-making. Furthermore, automated processing can also ensure that point clouds are processed consistently and accurately, reducing the potential for human error. This work is part of a larger effort to optimize early-phase design processes to promote the reuse of vacant buildings. It focuses on technical solutions to automate the reconstruction of point clouds into a digital twin as a simplified solid 3D element model. In this paper, various ML approaches, among others KPConv Thomas et al. (2019), ShapeConv Cao et al. (2021) and Mask-RCNN He et al. (2017), are compared in their ability to apply semantic as well as instance segmentation to point clouds. Further it relies on the S3DIS Armeni et al. (2017), NYU v2 Silberman et al. (2012) and Matterport Ramakrishnan et al. (2021) data sets for training. Here, the authors aim to establish a workflow that reduces the effort for users to process their point clouds and obtain object-based models. The findings of this research show that although pure point cloud-based ML models enable a greater degree of flexibility, they incur a high computational cost. We found, that using RGB-D images for classifications and segmentation simplifies the complexity of the ML model but leads to additional requirements for the data set. These can be mitigated in the initial process of capturing the building or by extracting the depth data from the point cloud.
keywords	Point Clouds, Machine Learning, Segmentation, Reuse, Digital Twins
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2017_183
id	ecaade2017_183
authors	Wendell, Augustus and Altin, Ersin
year	2017
title	Learning Space - Incorporating spatial simulations in design history coursework
doi	https://doi.org/10.52842/conf.ecaade.2017.1.261
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 261-266
summary	Art and architectural history education has long relied on photographic imagery. The geography of architectural history often demands an analog representation for the built form and photographic recordings have long been the widely adopted standard. In many cases, specific buildings have been taught for generations based on a handful of historical exposures. The impact of this precedent is an imperfect and highly privileged conception of architectural forms. Students learn only of a particular viewpoint of any given building, rather than understanding the building as a whole. Augmenting the tradition of select and static imagery in the classroom with new technologies can create a more comprehensive understanding of architectural precedents. This paper discusses an experiment conducted in Spring 2017 in presenting an architectural case study to a history class using a Virtual Reality 3D experience in comparison to a set of canonical photographs.
keywords	Unreal Engine; Virtual Reality; Photography; 3D; Education
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2017_061
id	ecaade2017_061
authors	Castellari, Dario and Erioli, Alessio
year	2017
title	Hydroassemblies - Unit-based system for the symbiosis of urban spaces and greeneries through hydraulic driven tectonics
doi	https://doi.org/10.52842/conf.ecaade.2017.1.661
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 661-670
summary	Hydroassemblies is a research thesis that investigates the architectural potential of a unit-based modular system that can recursively grow in space guided by hydrodynamic principles in order to generate intricate tectonic assemblies, integrating the roles of spatial articulator, water collector/distributor and plant cultivation substrate to foster a symbiotic relation with the urban environment. By implementing principles of circulatory systems in biology, the authors developed a system that grows through recursive formation of loops and articulates its tectonic via a continuous, interconnected branching network. The founding process improves upon a combinatorial algorithm of discrete parts, considering how iterative interactions at the local level have a feedback impact on the growth process at the whole system scale. The paper explores how features, spatial and perceptive qualities, affordances and opportunities emerge at the global scale of the formation from the interplay of local behavioral principles and environmental conditions. The provided implementation is a proof of concept of the production of complex qualities by means of massive quantities of simple elements and interactions.
keywords	tectonics; combinatorics; unit-based system; branching network
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2017_044
id	ecaade2017_044
authors	Fernando, Shayani, Reinhardt, Dagmar and Weir, Simon
year	2017
title	Simulating Self Supporting Structures - A Comparison study of Interlocking Wave Jointed Geometry using Finite Element and Physical Modelling Methods
doi	https://doi.org/10.52842/conf.ecaade.2017.2.177
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 177-184
summary	Self-supporting modular block systems of stone or masonry architecture are amongst ancient building techniques that survived unchanged for centuries. The control over geometry and structural performance of arches, domes and vaults continues to be exemplary and structural integrity is analysed through analogue and virtual simulation methods. With the advancement of computational tools and software development, finite and discrete element modeling have become efficient practices for analysing aspects for economy, tolerances and safety of stone masonry structures. This paper compares methods of structural simulation and analysis of an arch based on an interlocking wave joint assembly. As an extension of standard planar brick or stone modules, two specific geometry variations of catenary and sinusoidal curvature are investigated and simulated in a comparison of physical compression tests and finite element analysis methods. This is in order to test the stress performance and resilience provided by three-dimensional joints respectively through their capacity to resist vertical compression, as well as torsion and shear forces. The research reports on the threshold for maximum sinusoidal curvature evidenced by structural failure in physical modelling methods and finite element analysis.
keywords	Mortar-less; Interlocking; Structures; Finite Element Modelling; Models
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2017_043
id	sigradi2017_043
authors	Griz, Cristiana; Natália Queiroz, Carlos Nome
year	2017
title	Edificação Modular: Estudo de caso e protótipo de um sistema construtivo de código aberto utilizando prototipagem rápida [Modular Building: Case study and prototype of an open source modular system using rapid prototyping]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.293-300
summary	This paper presents the research development for a base structural module for the Casa Nordeste project. Casa Nordeste is a compact housing experiment that will participate in the Solar Decathlon Latin America competition. It consists of a modular building that houses living, cooking, and sanitizing space. Developments presented are based on digital design and fabrication principles and processes, through algorithms that allow its customization. In this sense, discussions begin with a brief theoretical discussion about the concepts that underline the project: evolutionary housing; digital technologies that improve design and construction; open source construction and generative design systems. The paper finalizes by presenting and discussing developments of three different design aspects of the structural module: (a) geometry of the frames, (b) its modulation, and (c) fittings and joining mechanisms.
keywords	Digital fabrication; Rapid prototyping; Visual programming; Compact housing.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_077
id	ecaade2017_077
authors	Mekawy, Mohammed and Petzold, Frank
year	2017
title	Exhaustive Exploration of Modular Design Options to Inform Decision Making
doi	https://doi.org/10.52842/conf.ecaade.2017.2.107
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 107-114
summary	Europe is facing an increasing demand for new construction, which is pushing the industry away from traditional construction technology towards prefabrication and Mass-Customization. However, prefabrication-based construction requires a more efficient, better informed decision making process due to the increased difficulty of on-site variations. Furthermore, the lack of means to navigate the whole spectrum of solutions for a given design problem using traditional tools, and the absence of the manufacturer's input in the early phases of the project can present significant challenges for the efficiency of the design and construction process. As a way to face these challenges, this paper presents an approach, realized as an Autodesk Dynamo-for-Revit package called Box Module Generator (BMG), which enables the exhaustive generation of configurations for a given building based on a construction scheme that utilizes Box Prefabricates. The output can be sorted, dissected and explored by users in various ways and the building geometry can be generated automatically in a Building Information Modeling environment. This makes it possible for the projects' stakeholders to browse thousands of potential design alternatives, which would otherwise be very hard to explore manually, or using traditional parametric modelers.
keywords	Prefabrication; Box Prefabricates; Design Tools; Design Automation; Building Information Modeling; Dynamo
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2017_124
id	ecaade2017_124
authors	Pantazis, Evangelos and Gerber, David
year	2017
title	Emergent order through swarm fluctuations - A framework for exploring self-organizing structures using swarm robotics
doi	https://doi.org/10.52842/conf.ecaade.2017.1.075
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 75-84
summary	In modern architecture, construction processes are based on top down planning, yet in nature but also in vernacular architecture, the shape of shelters/nests is the result of evolutionary material processes which takes place without any global coordination or plan. This work presents a framework for exploring how self-organizing structures can be achieved in a bottom up fashion by implementing a swarm of simple robots(bristle bots). The robots are used as a hardware platform and operate in a modular 2D arena filled with differently shaped passive building blocks. The robots push around blocks and their behaviour can be programmed mechanically by changing the geometry of their body. Through physical experimentation and video analysis the relationships between the properties of the emergent patterns (size, temporal stability) and the geometry of the robot/parts are studied. This work couples a set of agent based design tools with a robust robotic system and a set of analysis tools for generating and actualising emergent 2D structures.
keywords	Multi Agent Systems; Generative Design; Swarm Robotics; Self-organizing patterns
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_225
id	ecaade2017_225
authors	Rossi, Andrea and Tessmann, Oliver
year	2017
title	Geometry as Assembly - Integrating design and fabrication with discrete modular units
doi	https://doi.org/10.52842/conf.ecaade.2017.2.201
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 201-210
summary	This paper proposes a design and fabrication approach based on the conceptualization of architectural formations as spatial assemblies of discrete building blocks to be aggregated through custom robotic procedures. Such strategy attempts to create synergies between different technological methods and to define a new and open design space where discrete design, serial prototyping and robotic assembly can be exploited to create complex reconfigurable structures. With the aim to allow users to explore the field of discrete geometries for architectural application without need for prior programming knowledge, we developed a software framework for representing and designing with discrete elements, different digital fabrication techniques integrated with conventional production processes for serial prototyping of repetitive units, and custom robotic fabrication routines, allowing a direct translation from aggregated geometry to assembly toolpath. Together these methods aim at creating a more direct connection between design and fabrication, relying on the idea of discrete elements assembly and on the parallel between modular design and modularized robot code generation.
keywords	Digital Materials; Robotic Assembly; Discrete Design; Modular Fabrication; Design Tools
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
doi	https://doi.org/10.52842/conf.acadia.2017.028
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

For more results click below: