Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 239

Reformat results as: short short into frame detailed detailed into frame

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
doi	https://doi.org/10.52842/conf.acadia.2017.202
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ijac201715104
id	ijac201715104
authors	Matalucci, Berardo; Kenton Phillips, Alicia A Walf, Anna Dyson and Joshua Draper
year	2017
title	An experimental design framework for the personalization of indoor microclimates through feedback loops between responsive thermal systems and occupant biometrics
source	International Journal of Architectural Computing vol. 15 - no. 1, 54-69
summary	How can building technologies accommodate different and often conflicting user preferences without dissolving the social cohesiveness, intrinsic of every architectural intervention? Individual thermal comfort has often been considered a negligible sensorial experience by modern heating and cooling technologies, and is often influenced by large-group norms. Alternatively, we propose that buildings are repositories of indoor microclimates that can be realized to provide personalized comfort, to create healthier environments, and to enhance the attributes of architectural interventions into haptic dimensions. In response, the goal of this study is to characterize an experimental framework that integrates responsive thermal systems with occupants’ direct and indirect experience, which includes stress response and biometric data. A computational model was used up to inform and analyze thermal perception of subjects, and later tested in a responsive physical installation. While results show that thermal comfort assessment is affected by individual differences including cognitive functions and biometrics, further computational efforts are needed to validate biometric indicators. Finally, the implications of personalized built environments are discussed with respect to future technology developments and possibilities of design driven by biometric data.
keywords	Personalized thermal comfort, interactive building technologies, bio-feedback loops, indoor microclimates
series	other
type	normal paper
email
last changed	2019/08/02 08:28

_id	ecaade2017_059
id	ecaade2017_059
authors	Narangerel, Amartuvshin, Lee, Ji-Hyun and Stouffs, Rudi
year	2017
title	Thermal and Daylighting Optimization of Complex 3D Faceted Façade for Office Building
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 209-218
doi	https://doi.org/10.52842/conf.ecaade.2017.1.209
summary	Conventional façade design and its impact on building energy as well as indoor comfort is a well-researched topic in the architecture field. This paper examines the potential of a complex 3D shaped building envelope, elaborating on previous work by implementing energy simulation within the building façade optimization process. The multi-objective optimizations are conducted considering total thermal energy, electricity generation through BIPV, and daylighting in generic single person office rooms under meteorological data of Korea and Singapore. The performance of the non-dominants is analyzed and the results show an improvement in all objectives comparing with the preliminary study.
keywords	Parametric facade design; muli-objective optimization; energy optimization; daylighting; form finding
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia17_492
id	acadia17_492
authors	Robeller, Christopher; Weinand, Yves
year	2017
title	Realization of a Double-Layered Diamond Vault Made from CLT: Constraint-aware design for assembly, for the first integrally attached Timber Folded Plate lightweight structure, covering a column free span of 20 meters with only 45 millimeter thick CLT plates.
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 492- 501
doi	https://doi.org/10.52842/conf.acadia.2017.492
summary	The use of digital design and fabrication technology for the integration of joints into timber plate structures has been the subject of recent research in the field of architectural geometry. While most of research has been focused on joint geometries, assembly sequences, and the fabrication of smaller prototypes, there have been few implementations in buildings. This paper illustrates the challenges for such a process and offers our solutions for implementing it at a building scale through the example of a theater hall built from cross-laminated timber plates. The building achieves its column-free span of 20 meters with a plate thickness of only 45 mm through a form-active lightweight structure system. It combines prismatic and antiprismatic folded surfaces and a double-layered cross-section with integrated thermal insulation.
keywords	material and construction; fabrication
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia17_630
id	acadia17_630
authors	Vasanthakumar, Saeran; Saha, Nirvik; Haymaker, John; Shelden, Dennis
year	2017
title	Bibil: A Performance-Based Framework to Determine Built Form Guidelines
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 630- 639
doi	https://doi.org/10.52842/conf.acadia.2017.630
summary	City built-form guidelines act as durable constraints on building design decisions. Such guidelines directly impact energy, comfort and other performance conditions. Existing urban design and planning methods only consider a narrow range of potential design scenarios, with rudimentary performance criteria, resulting in suboptimal urban designs. Bibil is a software plugin for the Rhinoceros3D/Grasshopper3D CAD modeler that addresses this gap through the synthesis of design space exploration methods to help design teams optimize guidelines for environmental and energy performance criteria over the life cycle of the city. Bibil consists of three generative and data management modules. The first module simulates development scenarios from street and block information through time, the second designs appropriate architectural typology, and the third abstracts the typologies into a lightweight analysis model for detailed thermal load and energy simulation. State-of-the-art performance simulation is done via the Ladybug Analysis Tools Grasshopper3D plugin, and further bespoke analysis to explore the resulting design space is achieved with custom Python scripts.This paper first introduces relevant background for automated exploration of urban design guidelines. Then the paper surveys the state-of-the-art in design and performance simulation tools in the urban domain. Next the paper describes the beta version of the tool’s three modules and its application in a built form study to assess urban canyon performance in a major North American city. Bibil enables the exploration of a broader range of potential design scenarios, for a broader range of performance criteria, over a longer period of time.
keywords	design methods; information processing; simulation & optimization; form finding; generative system
series	ACADIA
email
last changed	2022/06/07 07:58

_id	acadia17_18
id	acadia17_18
authors	Abdel-Rahman, Amira; Michalatos, Panagiotis
year	2017
title	Magnetic Morphing
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 18-27
doi	https://doi.org/10.52842/conf.acadia.2017.018
summary	In an attempt to design shape-morphing multifunctional objects, this thesis uses programmable matter to design self-organizing multi-agent systems capable of morphing from one shape into another. The research looks at various precedents of self-assembly and modular robotics to design and prototype passive agents that could be cheaply mass-produced. Intelligence will be embedded into these agents on a material level, designing different local interactions to perform different global goals. The initial exploratory study looks at various examples from nature like plankton and molecules. Magnetic actuation is chosen as the external actuation force between agents. The research uses simultaneous digital and physical investigations to understand and design the interactions between agents. The project offers a systemic investigation of the effect of shape, interparticle forces, and surface friction on the packing and reconfiguration of granular systems. The ability to change the system state from a gaseous, liquid, then solid state offers new possibilities in the field of material computation, where one can design a "material" and change its properties on demand.
keywords	material and construction; construction/robotics; smart materials; smart assembly/construction; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ecaade2017_172
id	ecaade2017_172
authors	Brand?o, Filipe, Paio, Alexandra and Whitelaw, Christopher
year	2017
title	Mapping Mass Customization
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 417-424
doi	https://doi.org/10.52842/conf.ecaade.2017.2.417
summary	Mass customization (MC) and personal fabrication (PF) are current relevant topics in architecture offices practice and schools design research. Architects are adopting information based design and production techniques as a response to architectural century challenges. However, is not clear how various authors used and transformed the concept in practice, research and industry after three decades since the MC term was introduced by Davis (1987). Therefore, is essential to map the most relevant works in the field in relation to production and design control. The paper presents some of the results of the ongoing study through an evolving map that aims to visualize relationships, layering complexity and revealing difference.
keywords	Mass Customization; Personal Fabrication; Housing; Map
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_190
id	acadia17_190
authors	Coleman, James; Cole, Shannon
year	2017
title	By Any Means Necessary: Digitally Fabricating Architecture at Scale
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 190-201
doi	https://doi.org/10.52842/conf.acadia.2017.190
summary	Architectural manufacturing is a balancing act between production facility and a custom fabrication shop. Each project Zahner takes on is different from the last, and not likely to repeat. This means that workflows are designed and deployed for each project individually. We present Flash Manufacturing, a fabrication methodology we employ in the production of architectural elements for cutting-edge and computationally sophisticated buildings. By remixing manufacturing techniques and production spaces we are able to meet the novel challenges posed by fabricating and assembling hundreds of thousands of unique parts. We discuss methods for producing vastly different project types and highlight two building case studies: the Cornell Tech Bloomberg Center and the Petersen Automotive Museum. With this work, we demonstrate how design creativity is no longer at odds with reliable and cost-effective building practices. Zahner has produced hundreds of seminal buildings working with architects such as: Gehry Partners, Zaha Hadid, m0rphosis, Herzog & de Meuron, OMA, Steven Holl Architects, Studio Daniel Libeskind, Rafael Moneo, DS+R, Foster + Partners, Gensler, KPF, SANAA and many more. This paper disrupts conventional discourse surrounding manufacturing/construction methods by discussing the realities of mass customization—how glossy architectural products are forged through ad hoc inventive engineering and risk tolerance.
keywords	material and construction; fabrication; CAM; prototyping; construction; robotics
series	ACADIA
email
last changed	2022/06/07 07:56

_id	caadria2017_004
id	caadria2017_004
authors	Lo, Tian Tian, Schnabel, Marc Aurel and Moleta, Tane J.
year	2017
title	Gamification for User-Oriented Housing Design - A Theoretical Review
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 63-72
doi	https://doi.org/10.52842/conf.caadria.2017.063
summary	Fluctuating economies and changing family demographics have increased the complexity in meeting the spatial needs for contemporary housing. Digital systems that allow flexibility are growing in demand but its rate of development is not catching up with the rapid changes. This paper explores how digital interventions can limit or help the process of collaborative design in high-density mass housing context. One key factor in user-oriented design system is participation. Many researchers have looked into system usability, design simplification and realistic visualisation to provide an immersive experience for users to engage the design. This paper argues how gamification acts as a form of decision support within a bigger framework model for a user-oriented digital design system. Using three levels of rules: constitutive rules, operational rules and implicit rules, the aim is for users to generate a housing design outcome not only for themselves but also collaboratively with other users through gamification.
keywords	gamification; user-oriented; digital intervention; decision support; mass housing
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia17_650
id	acadia17_650
authors	Zayas, Luisel; Brugmann, Dustin; Clifford, Brandon; McGee, Wes; Durham, James
year	2017
title	Quarra Cairn: Incremental Stability Through Shifting and Removal of Mass
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 650- 659
doi	https://doi.org/10.52842/conf.acadia.2017.650
summary	Recent advances in integrating physical logic into computation strategies have brought the mastermakers mentality back to the forefront of the digital era, yet a long-standing problem persists: ongoing efforts to develop reciprocal structures with gravitational forces tend to generate forms that are unable to be constructed without massive falsework. This paper explores the potential to intelligently remove material from the interior of a column drum in order to produce a leaning column that could contribute to solving this age-old problem. The paper describes the computation and fabrication logic required, then demonstrates a full-scale prototype and some of the discoveries that emerged as a result of the computation process.
keywords	material and construction; fabrication
series	ACADIA
email
last changed	2022/06/07 07:57

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia17_266
id	acadia17_266
authors	Gonzalez Rojas,Paloma
year	2017
title	Space and Motion: Data-Driven Model of 4D Pedestrian Behavior
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 266-273
doi	https://doi.org/10.52842/conf.acadia.2017.266
summary	The understanding of space relies on motion, as we experience space by crossing it in time, space’s fourth dimension. However, architects lack the necessary tools to incorporate people's motion into their design of space. As a consequence, architects fail to connect space with the motion of the people that inhabit their buildings, creating disorienting environments. Further, what if augmentation technology changes how we inhabit space and the static built environment does not fit people anymore? This paper explores the problem of developing a model from people's motion, to inform and augment the architecture design process in the early stages. As an outcome, I have designed a model based on data from human-space interaction obtained through field work. First, relevant behavior was identified and recorded. Second, a metric was extracted from the data and composed by speed, the 4th D dimension as time, and gestures. Third, the original behavior was rebuilt, producing a set of rules. The rules were combined to form the model of human-space interaction. This generalizable model provides a novel approach to designing space based on data from people. Moreover, this paper presents a means of incorporating inhabitants' behavior into digital design. Finally, the model contributes to the advancement of people's motion research for general applications, such as in transport engineering, robotics, and cognitive sciences.
keywords	design methods; information processing; simulation & optimization; data visualization
series	ACADIA
email
last changed	2022/06/07 07:51

_id	acadia17_284
id	acadia17_284
authors	Hu, Zhengrong; Park, Ju Hong
year	2017
title	HalO [Indoor Positioning Mobile Platform]: A Data-Driven, Indoor-Positioning System With Bluetooth Low Energy Technology To Datafy Indoor Circulation And Classify Social Gathering Patterns For Assisting Post Occupancy Evaluation
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 284-291
doi	https://doi.org/10.52842/conf.acadia.2017.284
summary	Post-Occupancy Evaluation (POE) as an integrated field between architecture and sociology has created practical guidelines for evaluating indoor human behavior within a built environment. This research builds on recent attempts to integrate datafication and machine learning into POE practices that may one day assist Building Information Modeling (BIM) and multi-agent modeling. This research is based on two premises: 1) that the proliferation of Bluetooth Low Energy (BLE) technology allows us to collect a building user’s data cost-effectively and 2) that the growing application of machine learning algorithms allows us to process, analyze and synthesize data efficiently. This study illustrates that the mobile platform HalO can serve as a generic tool for datafication and automation of data analysis of the movement of a building user. In this research, the iOS mobile application HalO, combined with BLE beacons enable building providers (architects, developers, engineers and facility managers etc.) to collect the user’s indoor location data. Triangulation was used to pinpoint the user’s indoor positions, and k-means clustering was applied to classify users into different gathering groups. Through four research procedures—Design Intention Analysis, Data Collection, Data Storage and Data Analysis—the visualized and classified data helps building providers to better evaluate building performance, optimize building operations and improve the accuracy of simulations.
keywords	design methods; information processing; data mining; IoT; AI; machine learning
series	ACADIA
email
last changed	2022/06/07 07:49

_id	caadria2017_113
id	caadria2017_113
authors	Huang, Weixin, Lin, Yuming and Wu, Mingbo
year	2017
title	Spatial-Temporal Behavior Analysis Using Big Data Acquired by Wi-Fi Indoor Positioning System
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 745-754
doi	https://doi.org/10.52842/conf.caadria.2017.745
summary	Understanding of people's spatial behavior is fundamental to architectural and urban design. However, traditional investigation methods applied in environmental behavior studies is highly limited regarding the amount of samples and regions it covers, which is not sufficient for the exploration of complex dynamic human behaviors and social activities in architectural space. Only recently the developments in indoor positioning system (IPS) and big data analysis technique have made it possible to conduct a full-time, full-coverage study on human environmental behavior. Among the variety IPS systems, the Wi-Fi IPS system is increasingly widely used because it is easy to be applied with acceptable cost. In this paper, we analyzed a 60-days anonymized data set, collected by a Wi-Fi IPS system with 110 Wi-Fi access points. The analysis revealed interesting patterns on people's behavior besides temporal spatial distribution, ranging from the cyclical fluctuation in human flow to behavioral patterns of sub-regions, some of which are not easy to be identified and interpreted by the traditional field observation. Through this case study, behavioral data from IPS system has exhibited great potential in bringing about profound changes in the study of environmental behavior.
keywords	environmental behavior study; Wi-Fi; indoor positioning system; big data; spatial temporal behavior; ski resort
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia17_330
id	acadia17_330
authors	Krietemeyer, Bess; Bartosh, Amber; Covington, Lorne
year	2017
title	Shared Realities: A Method for Adaptive Design Incorporating Real-Time User Feedback using Virtual Reality and 3D Depth-Sensing Systems
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 330- 339
doi	https://doi.org/10.52842/conf.acadia.2017.330
summary	When designing interactive architectural systems and environments, the ability to gather user feedback in real time provides valuable insight into how the system is received and ultimately performs. However, physically testing or simulating user behavior with an interactive system outside of the actual context of use can be challenging due to time constraints and assumptions that do not reflect accurate social, behavioral, or environmental conditions. Employing evidence based, user-centered design practices from the field of human–computer interaction (HCI) coupled with emerging architectural design methodologies creates new opportunities for achieving optimal system performance and design usability for interactive architectural systems. This paper presents a methodology for developing a mixed reality computational workflow combining 3D depth sensing and virtual reality (VR) to enable iterative user-centered design. Using an interactive museum installation as a case study, user pointcloud data is observed via VR at full scale and in real time for a new design feedback experience. Through this method, the designer is able to virtually position him/herself among the museum installation visitors in order to observe their actual behaviors in context and iteratively make modifications instantaneously. In essence, the designer and user effectively share the same prototypical design space in different realities. Experimental deployment and preliminary results of the shared reality workflow are presented to demonstrate the viability of the method for the museum installation case study and for future interactive architectural design applications. Contributions to computational design, technical challenges, and ethical considerations are discussed for future work.
keywords	design methods; information processing; hci; VR; AR; mixed reality; computer vision
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia17_366
id	acadia17_366
authors	Lin, Yuming; Huang, Weixin
year	2017
title	Behavior Analysis and Individual Labeling Using Data from Wi-Fi IPS
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 366- 373
doi	https://doi.org/10.52842/conf.acadia.2017.366
summary	It is fairly important for architects and urban designers to understand how different people interact with the environment. However, traditional investigation methods for studying environmental behavior are quite limited in their coverage of samples and regions, which are not sufficient to delve into the behavioral differences of people. Only recently, the development of indoor positioning systems (IPS) and data-mining techniques has made it possible to collect full-time, full-coverage data for behavioral difference research and individualized identification. In our research, the Wi-Fi IPS system is chosen among the various IPS systems as the data source due to its extensive applicability and acceptable cost. In this paper, we analyzed a 60-day anonymized dataset from a ski resort, collected by a Wi-Fi IPS system with 110 Wi-Fi access points. Combining this with mobile phone data and questionnaires, we revealed some interesting characteristics of tourists from different origins through spatial-temporal behavioral data, and further conducted individual labeling through supervised learning. Through this case study, temporal-spatial behavioral data from an IPS system exhibited great potential in revealing individual characteristics besides exploring group differences, shedding light on the prospect of architectural space personalization.
keywords	design methods; information processing; data mining; big data
series	ACADIA
email
last changed	2022/06/07 07:59

_id	acadia17_392
id	acadia17_392
authors	Mesa, Olga; Stavric, Milena; Mhatre, Saurabh; Grinham, Jonathan; Norman, Sarah; Sayegh, Allen; Bechthold, Martin
year	2017
title	Non-Linear Matters: Auxetic Surfaces
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 392- 403
doi	https://doi.org/10.52842/conf.acadia.2017.392
summary	Auxetic structures exhibiting non-linear buckling are a prevalent research topic in the material sciences due to the ability to tune their reversible actuation, porosity, and negative Poisson’s ratio. However, the research is limited to feature sizes at scales below 10 mm2, and to date, there are no available efficient design and prototyping methods for architectural designers. Our study develops design principles and workflow methods to transform standard materials into auxetic surfaces at an architectural scale. The auxetic behavior is accomplished through buckling and hinging by subtracting from a homogeneous material to create perforated patterns. The form of the perforations, including shape, scale, and spacing, determines the behavior of multiple compliant "hinges" generating novel patterns that include scaling and tweening transformations. An analytical method was introduced to generate hinge designs in four-fold symmetric structures that approximate non-linear buckling. The digital workflow integrates a parametric geometry model with non-linear finite element analysis (FEA) and physical prototypes to rapidly and accurately design and fabricate auxetic materials. A robotic 6-axis waterjet allowed for rapid production while maintaining needed tolerances. Fabrication methods allowed for spatially complex shaping, thus broadening the design scope of transformative auxetic material systems by including graphical and topographical biases. The work culminated in a large-scale fully actuated and digitally controlled installation. It was comprised of auxetic surfaces that displayed different degrees of porosity, contracting and expanding while actuated electromechanically. The results provide a promising application for the rapid design of non-linear auxetic materials at scales complimentary to architectural products.
keywords	material and construction; CAM; prototyping; smart materials; auxetic
series	ACADIA
email
last changed	2022/06/07 07:58

_id	acadia17_426
id	acadia17_426
authors	Moorman, Andrew
year	2017
title	Pattern Making and Learning: Non-Routine Practices in Generative Design
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 426- 435
doi	https://doi.org/10.52842/conf.acadia.2017.426
summary	We now witness an upsurge in mainstream generative design tools fortified by simulation that speed up the concealed linear synthesis of optimized design alternatives. In pursuit of optimality, these tools saturate local machines or cloud servers with analysis and design iteration data, only to discard it once the procedure has concluded. Largely absent, however, are tools for an active, adaptive relationship with design exploration and the reuse of corresponding design data and metadata. In Pattern Making and Pattern Learning, we propose that these characteristics are mutually beneficial. This paper presents a series of revisions to the optimization framework for routine design synthesis that examine a potential symbiosis between the production of large datasets (big data) and non-routine practices of making in design. Our engagement with iterative design exercises is twofold: as a supply of computer-generated design information to foster user intuition and explore the design space on non-objective terms, and as a supply of human-generated design information to learn artifacts of user preference in the interest of design software personalization. These concepts are applied to the generation of functionally graded patterning in chair design, combining methods of physical production with programmable sheet material behavior through a custom interactive synthesis framework.
keywords	design methods; information processing; ai & machine learning; simulation & optimization; generative system
series	ACADIA
email
last changed	2022/06/07 07:58

_id	cf2017_042
id	cf2017_042
authors	Pinochet, Diego
year	2017
title	Discrete Heuristics: Digital design and fabrication through shapes and material computation
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 42.
summary	In the case of designers, architects and arts, tools are part of a repertoire of cognitive, symbolic, and semiotic artifacts with which each explores and learn about design problems. Nonetheless, when using digital fabrication tools, a dichotomy between what is ideated and what is made appears as an evident problem since many of the perceptual aspects of sensing and thinking about new things in the making are neglected. It is argued that this establishes a dichotomy between what is ideated and what is executed as an outcome from that idea. How designers can think, learn and augment their creativity by using digital tools in a more relational, exploratory, interactive and creative way? Furthermore, how can we teach design using contemporary fabrication tools beyond its representational capabilities? This paper explores the richness of using digital fabrication tools through the lens of shapes grammars as a design paradigm in order to extend computational making including digital fabrication tools, gestures and material behavior as crucial actors of the design process. Through the use of discrete heuristics - that is, the elaboration of deictic rules for computation with physical objects, materials and fabrication tools in a precise yet perceptual way- this paper shows experiments inside a third year design studio to overcome the hylomorphism present in the digital design and make dichotomy.
keywords	Digital fabrication, Computational making, Human computer interaction, Shape grammars
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	lasg_whitepapers_2019_291
id	lasg_whitepapers_2019_291
authors	Sabin, Jenny
year	2019
title	Lumen
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.291 - 318
summary	This paper documents the computational design methods, digital fabrication strategies, and generative design process for [Lumen], winner of MoMA & MoMA PS1’s 2017 Young Architects Program. The project was installed in the courtyard at MoMA PS1 in Long Island City, New York, during the summer of 2017. Two lightweight 3D digitally knitted fabric canopy structures composed of responsive tubular and cellular components employ recycled textiles, photo-luminescent and solar active yarns that absorb and store UV energy, change color, and emit light. This environment offers spaces of respite, exchange, and engagement as a 150 x 75-foot misting system responds to visitors’ proximity, activating fabric stalactites that produce a refreshing micro-climate. Families of robotically prototyped and woven recycled spool chairs provide seating throughout the courtyard. The canopies are digitally fabricated with over 1,000,000 yards of high tech responsive yarn and are supported by three 40+ foot tensegrity towers and the surrounding matrix of courtyard walls. Material responses to sunlight as well as physical participation are integral parts of our exploratory approach to the 2017 YAP brief. The project is mathematically generated through form-finding simulations informed by the sun, site, materials, program, and the material morphology of knitted cellular components. Resisting a biomimetic approach, [Lumen] employs an analogic design process where complex material behavior and processes are integrated with personal engagement and diverse programs. The comprehensive installation was designed by Jenny Sabin Studio and fabricated by Shima Seiki WHOLEGARMENT, Jacobsson Carruthers, and Dazian with structural engineering by Arup and lighting by Focus Lighting.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

For more results click below: