Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_228
id	ecaade2017_228
authors	Pihlajaniemi, Henrika, Luusua, Anna, Sarjanoja, Esa-Matti, Vääräniemi, Risto, Juntunen, Eveliina and Kourunen, Sini
year	2017
title	SenCity City Monitor as a platform for user involvement, innovation and service development
doi	https://doi.org/10.52842/conf.ecaade.2017.1.561
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 561-570
summary	Urban dashboards visualize information about the measured performance, structure, patterns and trends of cities. This paper introduces a concept of urban dashboard as a platform for participation, research, and service development. We present and reflect the development process of the City Monitor, which is a test version of an urban dashboard for the pilot cities participating in the SenCity project. The paper describes and reflects on the concept, structure, and content of the City Monitor and its participatory and iterative development process, through a case study. The case study encompasses a pilot implementation of the dashboard concept in a context of a housing area in the Finnish city of Salo, where intelligent roadway lighting was tested.
keywords	city dashboard; intelligent lighting; pilot; participation; simulation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia23_v3_71
id	acadia23_v3_71
authors	Vassigh, Shahin; Bogosian, Biayna
year	2023
title	Envisioning an Open Knowledge Network (OKN) for AEC Roboticists
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The construction industry faces numerous challenges related to productivity, sustainability, and meeting global demands (Hatoum and Nassereddine 2020; Carra et al. 2018; Barbosa, Woetzel, and Mischke 2017; Bock 2015; Linner 2013). In response, the automation of design and construction has emerged as a promising solution. In the past three decades, researchers and innovators in the Architecture, Engineering, and Construction (AEC) fields have made significant strides in automating various aspects of building construction, utilizing computational design and robotic fabrication processes (Dubor et al. 2019). However, synthesizing innovation in automation encounters several obstacles. First, there is a lack of an established venue for information sharing, making it difficult to build upon the knowledge of peers. First, the absence of a well-established platform for information sharing hinders the ability to effectively capitalize on the knowledge of peers. Consequently, much of the research remains isolated, impeding the rapid dissemination of knowledge within the field (Mahbub 2015). Second, the absence of a standardized and unified process for automating design and construction leads to the individual development of standards, workflows, and terminologies. This lack of standardization presents a significant obstacle to research and learning within the field. Lastly, insufficient training materials hinder the acquisition of skills necessary to effectively utilize automation. Traditional in-person robotics training is resource-intensive, expensive, and designed for specific platforms (Peterson et al. 2021; Thomas 2013).
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_118
id	acadia17_118
authors	As, Imdat; Nagakura, Takehiko
year	2017
title	Crowdsourcing the Obama Presidential Center: An Alternative Design Delivery Model: Democratizing Architectural Design
doi	https://doi.org/10.52842/conf.acadia.2017.118
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 118-127
summary	In this article, we present crowdsourcing as a design delivery method for publicly funded buildings, and compare it to the traditional Request for Proposals (RFP). We explore the potential of crowdsourcing through the use of an online design competition for the Obama Presidential Center in Chicago, IL, which the authors administered at Arcbazar.com, a crowdsourcing platform. Competition procedures have been applied in architectural practice since antiquity, from the Parthenon and the Hagia Sophia to thousands of seminal buildings around the globe. However, with the advent of digital technologies and outreach to a more interconnected world, crowdsourcing allows even the most mundane design challenges to go through the fair competition protocol. We argue that crowdsourcing can help democratize architectural design acquisition by giving a level playing field to designers, and produce a more just, competitive, and creative design product.
keywords	design methods; information processing; hybrid practices; crowdsourcing
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2017_585
id	cf2017_585
authors	Ben, Yuqiang; Niblock, Chantelle; Bonenberg, Lukasz
year	2017
title	Lincoln Cathedral Interactive Virtual Reality Exhibition
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 585-595.
summary	This paper demonstrates a workflow converting terrestrial laser scan (TLS) data into an interactive virtual reality (VR) platform. A VR exhibition prototype of Lincoln Cathedral was created to validate the established workflow in terms of the technical and visual performance, usability, and functionality. It combined TLS data and storytelling to produce a shareable platform, inviting opportunities for public engagement, and to facilitate custodians with the tools to maintain the building’s heritage. The paper discusses the use of open sourcesoftware and suggests future work.
keywords	3D Laser Scan, Virtual Reality, User Experience, Building Heritage
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	ecaade2017_173
id	ecaade2017_173
authors	Buš, Peter, Hess, Tanja, Treyer, Lukas, Knecht, Katja and Lu, Hangxin
year	2017
title	On-site participation linking idea sketches and information technologies - User-driven Customised Environments
doi	https://doi.org/10.52842/conf.ecaade.2017.1.543
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 543-550
summary	The paper introduces the methodology related to the topic of citizen-driven urban design and revises the idea of on-site participation of end-users, which could prospectively lead to customisation of architectural and urban space in a full-scale. The research in the first phase addresses the engagement of information technologies used for idea sketching in participatory design workshop related to local urban issues in the city of Chur in Switzerland by means of the Skity tool, the sketching on-line platform running on all devices. Skity allows user, which can be individual citizens or a community, to sketch, build, and adapt their ideas for the improvement of an urban locality. The participant is the expert of the locality because he or she lives in this place every day. The content of this paper is focused on the participatory design research project conducted as a study at the ETH Zürich and the Hochschule für Technik und Wirtschaft HTW in Chur in collaboration with Future Cities Laboratory in Singapore, mainly concentrated on the first step of the methodological approach introduced here.
keywords	responsive cities; urban mass-customisation; idea sketching; ideation; on-site participation; citizen design science
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_027
id	ecaade2017_027
authors	Carl, Timo, Schein, Markus and Stepper, Frank
year	2017
title	Sun Shades - About Designing Adaptable Solar Facades
doi	https://doi.org/10.52842/conf.ecaade.2017.2.165
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 165-174
summary	External shading structures are a well-established typology for reducing solar heat loads. A major disadvantage is their inflexible nature, blocking views from inside and desired solar radiation for seasons with less sunshine hours. An adaptive approach on the other end can accommodate dynamic environmental exchange and user control. Furthermore, kinetic movement has great potential to create expressive spatial structures. However, such typologies are inherently complex. This paper presents the design process for two novel adaptive façade typologies, conducted on an experimental level in an educational context. Moreover, we will discuss the conception of a suitable methodological framework, which we applied to engage the complexity of this design task. Thereby we will highlight the importance of employing various methods, combining analogue and computational models not in a linear sequence, but rather in an overlapping, iterative way to create an innovation friendly design setting. The Sun Shades project offers insight into the relationships between design potentials inherent in adaptable structures and the advantages and limitation of computational methods employed to tackle them.
keywords	computational design methodology; performance-based design; associative geometry modelling; solar simulation; physical form-finding; design theory
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_050
id	ecaade2017_050
authors	Cursi, Stefano, Simeone, Davide and Coraglia, Ugo Maria
year	2017
title	An ontology-based platform for BIM semantic enrichment
doi	https://doi.org/10.52842/conf.ecaade.2017.2.649
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 649-656
summary	In its application to design phases, BIM has progressively shown limits in terms of semantic representation and efficiency of supporting collaboration. This paper investigates the possibilities related to BIM representation enrichment through semantic web approaches, in order to represent knowledge rather than information and presents a prototypal application oriented to the integration of the informative model of the building with a knowledge base developed by means of ontologies, providing a more structured system of interconnected information.
keywords	BIM; Semantic enrichment; Knowledge Management; Ontologies
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2017_028
id	sigradi2017_028
authors	Dileta Pacini, Giordana; Andrés Martin Passaro, Gonçalo Castro Henriques
year	2017
title	Fab!t, Pavilhão Itinerante de Ensino: Proposta para inserção da cultura maker no ensino tradicional [Fab!t, Itinerant Teaching Pavilion: a proposal to include the maker culture in traditional education]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.198-206
summary	This project intends to introduce the maker culture into traditional education. The goal is to make technology teaching available in elementary education in a fast, cheap and egalitarian way, seeking to democratize its access and use it to integrate maker culture's principles into traditional school. For that several existing makerspaces and fab labs programs’ were studied to identify the core activities and equipments to support this proposal. Its contribution is an adaptable modular system with a demountable construction platform to foster customized spaces. The system is manufactured to enable the expansion and retraction of the structure allowing its future reuse.
keywords	Maker culture; Digital fabrication; Parametric design; Temporary architecture; Maker education
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_001
id	ecaade2017_001
authors	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.)
year	2017
title	ShoCK! – Sharing of Computable Knowledge!, Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2017.2
source	ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, 760 p.
summary	Internet of Things, pervasive nets, Knowledge ‘on tap’, Big Data, Wearable devices and the ‘Third wave’ of AI are disruptive technologies that are upsetting our globalised world as far as it can be foreseen from now. So academicians, professionals, researchers, innovation factories... are warmly invited to further shake up and boost our innovative and beloved CAAD world with new ideas, paradigms and points of view. Will our fine buildings and design traditions survive? Or, will they ‘simply’ be hybridized and enhanced by methods, techniques and CAAD tools? Obviously computation is needed to match the evergrowing performance requirements, but this is not enough to answer all these questions we have to deal with the essence of problems: improve design solutions for a better life. As life is not a matter of single individuals, we need to increase collaboration and to improve knowledge sharing. This means taking care of human beings, and involves a humanistic approach, and the long history of humankind ... from humans to thinking to technology ... and vice versa. A circle of human beings as eternal as our city.
series	eCAADe
last changed	2022/06/07 07:49

_id	ecaade2017_000
id	ecaade2017_000
authors	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.)
year	2017
title	ShoCK! – Sharing of Computable Knowledge!, Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2017.1
source	ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, 770 p.
summary	Internet of Things, pervasive nets, Knowledge ‘on tap’, Big Data, Wearable devices and the ‘Third wave’ of AI are disruptive technologies that are upsetting our globalised world as far as it can be foreseen from now. So academicians, professionals, researchers, innovation factories... are warmly invited to further shake up and boost our innovative and beloved CAAD world with new ideas, paradigms and points of view. Will our fine buildings and design traditions survive? Or, will they ‘simply’ be hybridized and enhanced by methods, techniques and CAAD tools? Obviously computation is needed to match the evergrowing performance requirements, but this is not enough to answer all these questions we have to deal with the essence of problems: improve design solutions for a better life. As life is not a matter of single individuals, we need to increase collaboration and to improve knowledge sharing. This means taking care of human beings, and involves a humanistic approach, and the long history of humankind ... from humans to thinking to technology ... and vice versa. A circle of human beings as eternal as our city.
series	eCAADe
last changed	2022/06/07 07:49

_id	acadia19_90
id	acadia19_90
authors	Forward, Kristen; Taron, Joshua
year	2019
title	Waste Ornament
doi	https://doi.org/10.52842/conf.acadia.2019.090
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 90-99
summary	The emergence of computational design and fabrication tools has escalated the potentials of architectural ornamentation to become innovative, beautiful, and highly sustainable. Historically, ornament has been known to express character and reveal relationships between materiality, technological advances, and societal evolution. But ornament rapidly declined in the late 1800s in large part due to mechanization and modernist ideals of uniform, unadorned façade components. However, ornamentation in architecture has recently reappeared—a development that can be linked closely to advancements in computational design and digital fabrication. While these advancements offer the ability to create expressive architecture, their potential contribution to the improvement of sustainable architecture has largely been overlooked (Augusti-Juan and Habert 2017). This paper provides a brief revisitation to the history of ornament and investigates the impact of computation and automation on the production of contemporary ornament. The paper also attempts to catalog examples of how designers have used computational technologies to address the growing criticality of environmental concerns. Moreover, the paper presents the Waste Ornament project, a research platform that critically examines how we can leverage technology to augment the visual and sustainable performance of facade ornamentation to reduce energy use in buildings. Three sub-projects are identified as territories for further research into sustainable ornamentation, ranging from material sourcing, to high-performance buildings, to the development of a systematic upcycling process that transforms old facades into new ones. While the examples are not exhaustive, they attempt to interlace the general ideas of waste and ornament by addressing particular issues that converge at building envelopes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaade2017_011
id	ecaade2017_011
authors	Haeusler, M. Hank, Asher, Rob and Booth, Lucy
year	2017
title	Urban Pinboard - Development of a platform to access open source data to optimise urban planning performance
doi	https://doi.org/10.52842/conf.ecaade.2017.1.439
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 439-448
summary	In this paper we present our research to design and develop 'Urban Pinboard', a platform to optimise urban planning process and performance. We argue that second machine age general purpose technologies can now be accessed for city modelling. Based on the observation that: GIS does offer a depository that can display urban data; data sets exist but often stored at different locations; there is a discrepancy of access to planning information; and the data often are not accessible to private / public sector and the general public on one location, Urban Pinboard aims to address these problems as an integrated digital platform that enables the public, private and community sectors to connect by contributing ideas, comments and proposals on all planning issues in a single platform. The paper outlines the background research, methodology and introduces the Urban Pinboard's features to create a single source of truth for planning data.
keywords	Software development; web-based GIS platform; Urban Planning; planning data
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2017_037
id	ecaade2017_037
authors	Hassan Khalil, Mohamed
year	2017
title	Learning by Merging 3D Modeling for CAAD with the Interactive Applications - Bearing walls, Vaults, Domes as Case study
doi	https://doi.org/10.52842/conf.ecaade.2017.1.353
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 353-362
summary	The development and the innovation of tools, techniques and digital applications represent a challenge for those who are in charge of architectural education to keep up with this development. This is because these techniques provide potentials that are not available in the traditional method of teaching. This raises an important question: can these tools and techniques help to achieve the targeted outcomes of education? This research paper discusses how to integrate both digital 3D models, of CAAD, and interactive applications for the development of architectural education curriculum. To test this, a case study has been conducted on the subject of building construction, for the second year at the faculty of engineering, specifically, the bearing walls construction system. In addition, this study has been divided into three parts. Through the first part, the scientific content of the curriculum, which tackles the bearing walls, has been prepared. The second part shows how to convert the scientific content into an interactive content in which the students learn through the experiment and the simulation of the traditional construction methods as the students a acquire construction skills and the ability to imagine different structural complexities. The third part includes the creation of both the application and the software containing the interactive curriculum. Workshop for the students has been held as a case study to test the effectiveness of this development and to recognize the pros and cons. The results confirmed the importance of integrating this applications into architectural education.
keywords	CAAD; 3D modeling ; Building Construction; Interactive applications; Bearing walls systems
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia17_284
id	acadia17_284
authors	Hu, Zhengrong; Park, Ju Hong
year	2017
title	HalO [Indoor Positioning Mobile Platform]: A Data-Driven, Indoor-Positioning System With Bluetooth Low Energy Technology To Datafy Indoor Circulation And Classify Social Gathering Patterns For Assisting Post Occupancy Evaluation
doi	https://doi.org/10.52842/conf.acadia.2017.284
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 284-291
summary	Post-Occupancy Evaluation (POE) as an integrated field between architecture and sociology has created practical guidelines for evaluating indoor human behavior within a built environment. This research builds on recent attempts to integrate datafication and machine learning into POE practices that may one day assist Building Information Modeling (BIM) and multi-agent modeling. This research is based on two premises: 1) that the proliferation of Bluetooth Low Energy (BLE) technology allows us to collect a building user’s data cost-effectively and 2) that the growing application of machine learning algorithms allows us to process, analyze and synthesize data efficiently. This study illustrates that the mobile platform HalO can serve as a generic tool for datafication and automation of data analysis of the movement of a building user. In this research, the iOS mobile application HalO, combined with BLE beacons enable building providers (architects, developers, engineers and facility managers etc.) to collect the user’s indoor location data. Triangulation was used to pinpoint the user’s indoor positions, and k-means clustering was applied to classify users into different gathering groups. Through four research procedures—Design Intention Analysis, Data Collection, Data Storage and Data Analysis—the visualized and classified data helps building providers to better evaluate building performance, optimize building operations and improve the accuracy of simulations.
keywords	design methods; information processing; data mining; IoT; AI; machine learning
series	ACADIA
email
last changed	2022/06/07 07:49

_id	caadria2017_008
id	caadria2017_008
authors	Hua, Hao and Jia, Tingli
year	2017
title	Fabricating Without CAD Models - Experiments with G-code and KUKA KRL
doi	https://doi.org/10.52842/conf.caadria.2017.883
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 883-892
summary	This research focuses on the transformation from design to fabrication without CAD models. In contrast to the conventional "design - modeling - fabrication" workflow, which involves multiple software, we experimented with a method of programming the bespoke fabrication process, and consequently defining the artifact. Algebraic models are employed to specify the materialization process carried out by various CNC machines. We used the programming language Java to create machine instructions for 3D printers, milling machines, and robots. In this method, design and production are not two separated processes; rather we regarded them as two aspects of one whole activity. Proficiency in machines and materials could contribute to design innovation.
keywords	digital fabrication; computational design; java; G-code; Kuka
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2021_354
id	caadria2021_354
authors	Huang, Chenyu, Gong, Pixin, Ding, Rui, Qu, Shuyu and Yang, Xin
year	2021
title	Comprehensive analysis of the vitality of urban central activities zone based on multi-source data - Case studies of Lujiazui and other sub-districts in Shanghai CAZ
doi	https://doi.org/10.52842/conf.caadria.2021.2.549
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 549-558
summary	With the use of the concept Central Activities Zone in the Shanghai City Master Plan (2017-2035) to replace the traditional concept of Central Business District, core areas such as Shanghai Lujiazui will be given more connotations in the future construction and development. In the context of todays continuous urbanization and high-speed capital flow, how to identify the development status and vitality characteristics is a prerequisite for creating a high-quality Central Activities Zone. Taking Shanghai Lujiazui sub-district etc. as an example, the vitality value of weekday and weekend as well as 19 indexes including density of functional facilities and building morphology is quantified by obtaining multi-source big data. Meanwhile, the correlation between various indexes and the vitality characteristics of the Central Activities Zone are tried to summarize in this paper. Finally, a neural network regression model is built to bridge the design scheme and vitality values to realize the prediction of the vitality of the Central Activities Zone. The data analysis method proposed in this paper is versatile and efficient, and can be well integrated into the urban big data platform and the City Information Modeling, and provides reliable reference suggestions for the real-time evaluation of future urban construction.
keywords	multi-source big data; Central Activities Zone; Vitality; Lujiazui
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2017_055
id	sigradi2017_055
authors	Jipa, Andrei; Mathias Bernhard, Nicolas Ruffray, Dr. Timothy Wangler, Prof. Dr. Flatt, Robert; Benjamin Dillenburger
year	2017
title	SkelETHon Formwork - 3D Printed Plastic Formwork for Load-Bearing Concrete Structures
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.379-387
summary	The imperative need for complex geometries in architecture is driving innovation towards an unconstrained fabrication freedom in building components. Fabrication constraints are a critical obstacle when material efficiency through complex, optimized topologies is sought. To address this constraint, this research investigates the use of 3D printed plastic formwork for fibre reinforced concrete at large scale. This novel construction method makes complex topologies and precise details possible for full-scale, load bearing structures. To demonstrate its potential applications, SkelETHon —a functional four-meter-long concrete canoe— was designed, built and raced in a regatta on the Rhine river (Figure 1).
keywords	Concrete; 3D Printing; Formwork; Digital Fabrication; Canoe;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2017_027
id	caadria2017_027
authors	Johanson, Madeleine, Khan, Nazmul, Asher, Rob, Butler, Andrew and Haeusler, M. Hank
year	2017
title	Urban Pinboard - Establishing a Bi-directional Workflow Between Web-based Platforms and Computational Tools
doi	https://doi.org/10.52842/conf.caadria.2017.715
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 715-724
summary	Architecture is heading towards a future where data is collected, collated and presented in a dynamic platform. There is a potential for many standard processes in the industry to become automated, such as the site analysis process. Streamlining aspects of the design process allows architects to pay greater attention on creative design solutions for their buildings and less time engaging in complex, time consuming analytical programs. Urban Pinboard, a web-based GIS platform, promises to establish a bi-directional workflow between web data depositories and computational tools through the medium of a website. By doing so, the website allows users with minimal experience in computational processes to be engaged in the utilisation of these large datasets. Through the automation of these processes, relationships within the built environment industry can excel, leading towards performative driven designs.
keywords	Urban Planning; Computational Urbanism; Data-driven Design; New Workflow Models; Software Development.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2017_301
id	ecaade2017_301
authors	Kalantari, Saleh and Ghandi, Mona
year	2017
title	Data-responsive Architectural Design Processes
doi	https://doi.org/10.52842/conf.ecaade.2017.2.503.2
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 503-512
summary	Current advancements in information technology and mechanical components offer incredible new possibilities for innovation in architecture. Many aspects of our physical environment are becoming integrated with information systems, a phenomenon that has been referred to as the "Internet of Things." The implications and applications of this technology are far-reaching, and students who are learning about design in today's environment have a bewildering array of new tools available for their exploration. This paper reviews some of the central concepts of contemporary data-driven design, and describes how these concepts can be used in a pedagogical framework to encourage student innovation. The authors provide details about their work with students in IDR Studios, and highlight some of the innovative design solutions created by students using information-based toolsets. This research provides a pedagogical framework for helping design students to engage with new technological resources as they work to develop the architectural intelligence.
keywords	Adaptive Systems; Internet of Things; Big Data; Data Driven Design Process
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: