Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 573

Reformat results as: short short into frame detailed detailed into frame

_id	acadia17_238
id	acadia17_238
authors	El-Zanfaly, Dina
year	2017
title	A Multisensory Computational Model for Human-Machine Making and Learning
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 238-247
doi	https://doi.org/10.52842/conf.acadia.2017.238
summary	Despite the advancement of digital design and fabrication technologies, design practices still follow Alberti’s hylomorphic model of separating the design phase from the construction phase. This separation hinders creativity and flexibility in reacting to surprises that may arise during the construction phase. These surprises often come as a result of a mismatch between the sophistication allowed by the digital technologies and the designer’s experience using them. These technologies and expertise depend on one human sense, vision, ignoring other senses that could be shaped and used in design and learning. Moreover, pedagogical approaches in the design studio have not yet fully integrated digital technologies as design companions; rather, they have been used primarily as tools for representation and materialization. This research introduces a multisensory computational model for human-machine making and learning. The model is based on a recursive process of embodied, situated, multisensory interaction between the learner, the machines and the thing-in-the-making. This approach depends heavily on computational making, abstracting, and describing the making process. To demonstrate its effectiveness, I present a case study from a course I taught at MIT in which students built full-scale, lightweight structures with embedded electronics. This model creates a loop between design and construction that develops students’ sensory experience and spatial reasoning skills while at the same time enabling them to use digital technologies as design companions. The paper shows that making can be used to teach design while enabling the students to make judgments on their own and to improvise.
keywords	education, society & culture; fabrication
series	ACADIA
email
last changed	2022/06/07 07:55

_id	cf2017_617
id	cf2017_617
authors	Groenewolt, Abel
year	2017
title	Stair Design Using Quantified Smoothness
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 617-629.
summary	This paper introduces metrics to evaluate stair geometry and shows how these metrics can be used to develop versatile computational stair design tools for the design of smooth stairs. The proposed stair smoothness metrics are based on the angles between tread lines, the angles between the walk line and tread lines, and the dimensions of tread sides. Using these metrics in combination with evolutionary algorithms results in computational methods that are highly flexible: as opposed to common software tools that generate particular classes of stairs (such as helical stairs or u-shaped stairs), this approach could be used for any stair design. The proposed methods produce results that match or surpass the smoothness of manually designed stairs and enable the implementation of features that are not available in other design tools, such as obstacle avoidance. Applications of the proposed method are shown for both freestanding stairs and stairs with a predefined footprint.
keywords	Stairs, Stair Design, Evolutionary Algorithms, Computational Design
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2017_163
id	caadria2017_163
authors	Kalantari, Saleh and Saleh Tabari, Mohammad Hassan
year	2017
title	GrowMorph: Bacteria Growth Algorithm and Design
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 479-487
doi	https://doi.org/10.52842/conf.caadria.2017.479
summary	GrowMorph is an ongoing research project that addresses the logic of bacterial cellular growth and its potential uses in architecture and design. While natural forms have always been an inspiration for human creativity, contemporary technology and scientific knowledge can allow us to advance the principle of biomimesis in striking new directions. By examining various patterns of bacterial growth, including their parametric logic, their use of responsive membranes and scaffolding structures, and their environmental fitness, this research creates new algorithmic design and construction models that can be applied through digital fabrication. Based on data from confocal microscopy, simulations were created using programming language Processing to model the environmental responses and morphology of the bacteria's growth. To demonstrate the utility of the results, the simulations created in this research were used to design an organically shaped pavilion and to suggest a new digital knitting process for material construction. The results from the study can inspire designers to make use of bacterial growth logic in their work, and provide them with practical tools for this purpose. Potential applications include novel designs for responsive surfaces, new fabrication processes, and unique spatial structures in future architectural work.
keywords	Synthetic Biology; Architecture; Bio-fabrication; Bio-constructs; Design Computation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2017_124
id	ecaade2017_124
authors	Pantazis, Evangelos and Gerber, David
year	2017
title	Emergent order through swarm fluctuations - A framework for exploring self-organizing structures using swarm robotics
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 75-84
doi	https://doi.org/10.52842/conf.ecaade.2017.1.075
summary	In modern architecture, construction processes are based on top down planning, yet in nature but also in vernacular architecture, the shape of shelters/nests is the result of evolutionary material processes which takes place without any global coordination or plan. This work presents a framework for exploring how self-organizing structures can be achieved in a bottom up fashion by implementing a swarm of simple robots(bristle bots). The robots are used as a hardware platform and operate in a modular 2D arena filled with differently shaped passive building blocks. The robots push around blocks and their behaviour can be programmed mechanically by changing the geometry of their body. Through physical experimentation and video analysis the relationships between the properties of the emergent patterns (size, temporal stability) and the geometry of the robot/parts are studied. This work couples a set of agent based design tools with a robust robotic system and a set of analysis tools for generating and actualising emergent 2D structures.
keywords	Multi Agent Systems; Generative Design; Swarm Robotics; Self-organizing patterns
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia17_640
id	acadia17_640
authors	Yousif, Shermeen; Yan, Dr. Wei; Culp, Dr. Charles
year	2017
title	Incorporating Form Diversity into Architectural Design Optimization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 640- 649
doi	https://doi.org/10.52842/conf.acadia.2017.640
summary	In this study, we introduce a new approach that incorporates form diversity into architectural design optimization, which will potentially accommodate designers' aesthetic judgment into the whole building optimization process. Form diversity is defined here as the level of difference in building geometric forms. We developed a form comparison algorithm to lead to a reasonable number of optimal design solutions of highly diverse forms. This allows for a post-optimization articulation of preferred solutions, and helps satisfy the aesthetic criterion in parallel to the measurable objectives. The methodology involves experimenting and prototyping. Experiments were done at different progress levels of the optimization tasks to test the feasibility of the system’s framework. A prototype framework was developed using parametric modeling, energy simulation, daylight simulation, Pareto optimization, and Multi-Objective Genetic Algorithms. The initial results demonstrate that the system has the capability to successfully work as desired with possible improvements. Comparison of results before and after shape comparison is discussed.
keywords	design methods; information processing; simulation; optimization; form finding; generative system
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ecaade2017_306
id	ecaade2017_306
authors	Rossi, Michela and Buratti, Giorgio
year	2017
title	Form is Matter - Triply periodic minimal surfaces structures by digital design tools
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 259-268
doi	https://doi.org/10.52842/conf.ecaade.2017.2.259
summary	Architecture and biology teach that the shape affects mechanical behaviour of structures therefore geometry is the basic concept of design, with an ethic responsible and sustainable approach, following the nature's organic model. Industrial design may apply formal properties of elementary shapes and basic design rules to manage the "geometrical behaviour" of new structural surfaces. The research aims to apply digital tools to the design of surface structures that maximise the matter efficiency in the development of "solid fabrics" with parametric controlled geometry.
keywords	Minimal surfaces; Parametric and generative design; Shape and form studies; Digital fabrication
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_302
id	ecaade2017_302
authors	Saleh Tabari, Mohammad Hassan, Kalantari, Saleh and Ahmadi, Nooshin
year	2017
title	Biofilm-inspired Formation of Artificial Adaptive Structures
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 303-312
doi	https://doi.org/10.52842/conf.ecaade.2017.2.303
summary	Todays design researchers are beginning to develop a process-based approach to biomimicry. Instead of merely looking at static natural structures for inspiration, we are learning to draw from the underlying organic processes that lead to the creation of those structures. This paradigm shift points us in the direction of adaptive fabrication systems that can grow through processes of self-assembly and can reconfigure themselves to meet the contours of local environments. In this study we examined the structural growth patterns of bacterial biofilms as a basis for a new kind of artificial, self-assembling module. This demonstration of bio-inspired design shows how contemporary technology allows us to harness the lessons of evolution in new and innovative ways. By exploring the dynamic assembly of complex structural formations in nature, we are able to derive new resource-efficient approaches to adaptable designs that are suited to changing environments. Ultimately we aspire to produce fully synthetic analogues that follow similar patterns of self-assembly to those found in bacterial biofilm colonies. Designers have only just begun to explore the tremendous wealth of natural form-creation processes that can now be replicated with computer-aided design and fabrication; this project shows just one example of what the future might hold.
keywords	Biofilm; Adaptive Structure; Formation; Quorum Sensing; Parametric Condition
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_021
id	ecaade2017_021
authors	Agirbas, Asli
year	2017
title	The Use of Simulation for Creating Folding Structures - A Teaching Model
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2017.1.325
summary	In architectural education, the demand for creating forms with a non-Euclidean geometry, which can only be achieved by using the computer-aided design tools, is increasing. The teaching of this subject is a great challenge for both students and instructors, because of the intensive nature of architecture undergraduate programs. Therefore, for the creation of those forms with a non-Euclidean geometry, experimental work was carried out in an elective course based on the learning visual programming language. The creation of folding structures with form-finding by simulation was chosen as the subject of the design production which would be done as part of the content of the course. In this particular course, it was intended that all stages should be experienced, from the modeling in the virtual environment to the digital fabrication. Hence, in their early years of architectural education, the students were able to learn versatile thinking by experiencing, simultaneously, the use of simulation in the environment of visual programming language, the forming space by using folding structures, the material-based thinking and the creation of their designs suitable to the digital fabrication.
keywords	Folding Structures; CAAD; Simulation; Form-finding; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2017_115
id	caadria2017_115
authors	Araullo, Rebekah and Haeusler, M. Hank
year	2017
title	Asymmetrical Double-Notch Connection System in Planar Reciprocal Frame Structures
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 539-548
doi	https://doi.org/10.52842/conf.caadria.2017.539
summary	Reciprocal Frame Structures (RF) have broad application potentials. Flexible to using small available materials, they span large areas, including varied curvature and doubly-curved forms. Although not many buildings using RF have been constructed to date, records indicate RF efficiencies where timber was widely used in structures predating modern construction. For reasons of adaptability and economy, advances in computation and fabrication precipitated increase in research into RF structures as a contemporary architectural typology. One can observe that linear timber such as rods and bars feature in extensive RF research. However, interest in planar RF has only recently emerged in research. Hence one can argue that planar RF provides depth to explore new design possibilities. This paper contributes to the growing knowledge of planar RF by presenting a design project that demonstrates an approach in notching systems to explore design and structural performance. The design project, the developed design workflow, fabrication, assembly and evaluation are discussed in this paper.
keywords	Reciprocal Frame Structures; Space Frames; Computational Design; Digital Fabrication; Deployable Architecture
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2017_443
id	cf2017_443
authors	Araya, Sergio; Veliz, Felipe; Quest, Sylvana; Truffello, Ricardo
year	2017
title	Igneous Tectonics: Turning disaster into resource through digital fabrication
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 443-456.
summary	This investigation aims to develop and establish digital fabrication and design techniques and protocols to process volcanic materials that have caused significant environmental and social damage, using them to reconstruct new and improved structures to replace those destroyed, palliating the negative effects of volcanic eruptions and contributing a new economic resource to affected communities. The study recovers underused material and explore its qualities, recovering lost stonemasonry skills though advanced CNC and robotic manufacturing.
keywords	Robotic manufacturing, parametric design, digital fabrication, material research, CNC stonemasonry.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	ecaade2017_277
id	ecaade2017_277
authors	Borhani, Alireza and Kalantar, Negar
year	2017
title	APART but TOGETHER - The Interplay of Geometric Relationships in Aggregated Interlocking Systems
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 639-648
doi	https://doi.org/10.52842/conf.ecaade.2017.1.639
summary	In this research, the authors discuss multiple design process criteria, fabrication methods, and assembly workflows for covering spaces using discrete pieces of material shorter than the space's span, otherwise known as topologically interlocking structures. To expand this line of research, the study challenges the interplay of geometric relationships in the assembly of unreinforced and mortar-less structures that work purely under compressive forces. This work opens with a review of studies concerning topological interlocking, a unique type of material and structural system. Then, through a description of two design projects - an interlocking footbridge and a vaulted structure - the authors demonstrate how they encouraged students to engage in a systematic exploration of the generative relationships among surface geometry, the configuration and formal variations of its subdividing cells, and the stability of the final interlocking assembly. In this fashion, the authors argue that there is hope for carrying the design criteria of topological interlocking systems into the production of precast concrete structures.
keywords	Topological Interlocking Assembly, Digital Stereotomy, Compression-Only Vaulted Structures, Surface Tessellation, Digital Materiality.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_170
id	acadia17_170
authors	Byrne, Ultan
year	2017
title	Point-Cloud-Paint: A Software Tool for Speculative Urban Design Using Three-Dimensional Digital Collage
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 170-177
doi	https://doi.org/10.52842/conf.acadia.2017.170
summary	Beginning from a provocation in Auguste Blanqui’s Eternity by the Stars, this paper reports on a new methodology of digital collage for urban design. The research is situated relative to the current discourses surrounding both voxelization and point-cloud data structures in order to motivate the concept of a recombinant approach to design in existing cities. Building on these sources, and with reference to recent developments in mesh shape composition techniques, the paper presents the resulting software implementation “Point-Cloud-Paint”: a tool that enables collage-based combinatorial experimentation with urban point-cloud data.
keywords	simulation; representation; design methods; information processing
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_407
id	ecaadesigradi2019_407
authors	Capone, Mara, Lanzara, Emanuela, Marsillo, Laura and Nome Silva, Carlos Alejandro
year	2019
title	Responsive complex surfaces manufacturing using origami
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 715-724
doi	https://doi.org/10.52842/conf.ecaade.2019.2.715
summary	Contemporary architecture is considered a dynamic system, capable of adapting to different needs, from environmental to functional ones. The term 'Adaptable Architecture' describes an architecture from which specific components can be changed in relation to external stimuli. This change could be executed by the building system itself, transformed manually or it could be any other ability to be transformed by external forces (Leliveld et al.2017). Adaptability concept is therefore linked to motion and to recent advances in kinetic architecture. In our research we are studying the rules that we can use to design a kinetic architecture using origami. Parametric design allows us to digitally simulate the movement of origami structures, we are testing algorithmic modeling to generate doubly curvature surfaces starting from a designed surface and not from the process. Our main goal is to study the relationship between geometry, motion and shape. We are interested, in particular, in complex surface manufacture using origami technique to design a kinetic and reactive ceiling.
keywords	Origami; complex surface manufacture; responsive architecture; Applied Geometry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
doi	https://doi.org/10.52842/conf.caadria.2017.467
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_008
id	ecaade2017_008
authors	Fukuda, Tomohiro, Inoue, Kazuya and Yabuki, Nobuyoshi
year	2017
title	PhotoAR+DR2016 - Integrating Automatic Estimation of Green View Index and Augmented and Diminished Reality for Architectural Design Simulation
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 495-502
doi	https://doi.org/10.52842/conf.ecaade.2017.2.495
summary	Urban vegetation has been used to tackle architectural and urban problems by reducing urban heat islands and improving the quality of urban landscapes and biodiversity. The green view index provides end users with a metric to intuitively understand the vegetation scenarios. This study integrates a green view index estimation method and augmented reality (AR) and diminished reality (DR) scenes of future architectural and urban design simulations. We developed the AR/DR system "PhotoAR+DR2016 (photogrammetry-based augmented and diminished reality)" that simultaneously measures the green view index and simulates building, urban, and planting designs with addition, demolition, and removal of the objects such as structures. The developed system enables real-time measurement of the green view index by appropriately reducing the image size and extracting the green area. Using the developed prototype system, the on-site verification can be conducted; in addition, the processing speed and the accuracy and inaccuracy rates can be measured, and the green view index can be sufficiently measured in real time.
keywords	Green View Index; Landscape assessment; Design support system; Diminished Reality; Augmented Reality; Image analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2017_601
id	cf2017_601
authors	Gerber, David Jason; Pantazis, Evangelos; Wang, Alan
year	2017
title	Interactive Design of Shell Structures Using Multi Agent Systems: Design Exploration of Reciprocal Frames Based on Environmental and Structural Performance
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 601-616.
summary	This paper presents a continuation of research on the prototyping of multi-agent systems for architectural design with a focus on generative design as a means to improve design exploration in the context of multiple objectives and complexity. The interactive design framework focuses on coupling force, environmental constraints and fabrication parameters as design drivers for the form finding of shell structures. The objective of the research is to enable designers to intuitively generate free form shells structures that are conditioned by multiple objectives for architectural exploration in early stages of design. The generated geometries are explored through reciprocal frames, and are evaluated in an automated fashion both on local and global levels in terms of their structural and environmental performance and constructability. The analytical results along with fabrication constraints are fed back into the generative design process in order to more rapidly and expansively design explore across complexly coupled objectives. The paper describes the framework and presents the application of this methodology for the design of fabrication aware shell structures in which environmental and structural trade offs drive the final set of design options.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	ecaade2017_198
id	ecaade2017_198
authors	Hussein, Hussein, Agkathidis, Asterios and Kronenburg, Robert
year	2017
title	Free-form Transformation Of Spatial Bar Structures - Developing a design framework for kinetic surfaces geometries by utilising parametric tools
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 747-756
doi	https://doi.org/10.52842/conf.ecaade.2017.1.747
summary	This paper presents a design framework for free-form transformation of kinetic, spatial bar structures using computational design techniques. Spatial bar structures considered as deployable, transformable kinetic structures composed of straight, linear members, assembled in a three-dimensional configuration. They are often utilised in portable, mobile or transformable buildings. Transformable systems of spatial bar structures are mostly based on modification of primitive shapes (e.g. box, sphere, and cylinder). Each system is subdivided into multiple members having the same shape, the so-called kinetic blocks. Some diverse precedents made to develop other forms of transformation of these structures with some issues. This research project will investigate how a free-form transformation of spatial bar systems can be achieved, by redesigning the kinetic block in relation to architectural, technical parameters. In order to develop a physical prototype of the kinetic block, and assess its potential in enabling free-form transformation of a spatial bar system, a design framework incorporating parametric, algorithmic and kinetic design strategies is required. The proposed design workflow consists of three main phases: form-finding, stability validation and actuation.
keywords	Parametric design; Kinetic; transformable; deployable; Free-form; design strategy
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2017_094
id	ecaade2017_094
authors	Jovanovic, Marko, Vucic, Marko, Mitov, Dejan, Tepavèeviæ, Bojan, Stojakovic, Vesna and Bajsanski, Ivana
year	2017
title	Case Specific Robotic Fabrication of Foam Shell Structures
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 135-142
doi	https://doi.org/10.52842/conf.ecaade.2017.2.135
summary	Most recent developments in the design of free form shells pursue new approaches in digital fabrication based on material properties and construction-aware design. In this research we proposed an alternative approach based on implementation of expanded polystyrene (EPS), a non-standard material for shells, in the process of industrial robot fabrication that enables fast and precise cutting of building elements. Main motivation for using EPS as a building material was driven by numerous advantages when compared to commonly used materials such as: recycleability, cost-efficiency, high earthquake resistance, durability and short assembly time. We describe case specific fabrication approach based on numerous production constraints (size of the panels, limited robot workspace, in situ conditions) that directly design the process.
keywords	computational design; shell structures; robotic fabrication; hot-wire cutting; multi-robot control
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2017_180
id	cf2017_180
authors	Jun, Ji Won; Silverio, Matteo; Llubia, Josep Alcover; Markopoulou, Areti; Chronis; Angelos; Dubor, Alexandre
year	2017
title	Remembrane: A Shape Changing Adaptive Structure
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 180-198.
summary	This paper presents a research on adaptive kinetic structures using shape memory alloys as actuators. The target of the research is designing and building an efficient kinetic structural system that could be potentially applied at an architectural scale. The project is based on the study of tensegrity and pantograph structures as a starting point to develop multiple digital and physical models of different structural systems that can be controllably moved. The result of this design process is a performative prototype that is controllable through a web-based interface. The main contribution of this project is not any of the presented parts by themselves but the integration of all of them in the creation of a new adaptive system that allows us to envision a novel way of designing, building and experiencing architecture in a dynamic and efficient way.
keywords	Responsive Structures, Kinetic Structures, Adaptive Systems, User Interaction, Structural Optimization
series	CAAD Futures
email
last changed	2017/12/01 14:38

For more results click below: