Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 569

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2017_027
id	caadria2017_027
authors	Johanson, Madeleine, Khan, Nazmul, Asher, Rob, Butler, Andrew and Haeusler, M. Hank
year	2017
title	Urban Pinboard - Establishing a Bi-directional Workflow Between Web-based Platforms and Computational Tools
doi	https://doi.org/10.52842/conf.caadria.2017.715
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 715-724
summary	Architecture is heading towards a future where data is collected, collated and presented in a dynamic platform. There is a potential for many standard processes in the industry to become automated, such as the site analysis process. Streamlining aspects of the design process allows architects to pay greater attention on creative design solutions for their buildings and less time engaging in complex, time consuming analytical programs. Urban Pinboard, a web-based GIS platform, promises to establish a bi-directional workflow between web data depositories and computational tools through the medium of a website. By doing so, the website allows users with minimal experience in computational processes to be engaged in the utilisation of these large datasets. Through the automation of these processes, relationships within the built environment industry can excel, leading towards performative driven designs.
keywords	Urban Planning; Computational Urbanism; Data-driven Design; New Workflow Models; Software Development.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2017_086
id	sigradi2017_086
authors	Rossi, Ludovica; Fernando Juan Ramos Galino
year	2017
title	Estructura de Neumáticos Bio-Inspirada en la Madera de Cactus [Tire Structure Bio-Inspiredto the Cactus Wood]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.598-604
summary	This study aims to reproduce the biological mechanisms of the living tissue of cactus plants. The construction of small-scale physical models, in bicycle tire bands, allows verifying the response of the bands to the applied stresses. The study of the morphology in the elastic field defines the form in relation to different levels of deformations, also according the equilibrium dynamics that are generated. The process of digital representation allows understanding how the morphology works, by coding and systematizing the associated geometries. The virtual model integrates and completes the physical model allowing extrapolating the dynamic aspects of the construction process.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	acadia17_374
id	acadia17_374
authors	Manninger, Sandra; del Campo, Matias
year	2017
title	Plato's Columns: Platonic Geometries vs. Vague Gestures in Robotic Construction
doi	https://doi.org/10.52842/conf.acadia.2017.374
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 374- 381
summary	This paper examines the inherent possibilities for architectural production in automated deposition modeling techniques, primarily explored through the use of industrial robots in combination with plastic deposition heads. These robots, in combination with various polymers, toolpaths and colorations, served as a design ecology for the exploration of emergent behaviors in robotic construction. The relationship between geometry (Euclidian, topological, fractal), mechanical properties of material (plasticity, elasticity, viscosity, resilience), optical properties (color, absorbance, transmittance, scattering), and the gestural qualities of robotic toolpaths constitute the palette adopted for the presented project. The project combines the rigor of a platonic body (Figure 2) with the emergent properties of vague gestures. The introduction of moments of uncertainty in the process produces glitches that are embraced as an opportunity to find novel aesthetic conditions. The profound entanglement with the post-digital realm is discussed as the discursive plane of thinking applied to the project.
keywords	design methods; information processing fabrication; construction/robotics; form finding; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:59

_id	caadria2017_131
id	caadria2017_131
authors	Abe, U-ichi, Hotta, Kensuke, Hotta, Akito, Takami, Yosuke, Ikeda, Hikaru and Ikeda, Yasushi
year	2017
title	Digital Construction - Demonstration of Interactive Assembly Using Smart Discrete Papers with RFID and AR codes
doi	https://doi.org/10.52842/conf.caadria.2017.075
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 75-84
summary	This paper proposes and examines a new way of cooperation between human workers and machine intelligence in architectural scale construction. For the transfer of construction information between the physical and digital world, mature technologies such as Radio Frequency IDentifier (RFID), and emerging technologies like Augmented Reality (AR) are used in parallel to supplement each other. Dynamic data flow is implemented to synchronize digital and physical models by following the ID signatures of individual building parts. The contributions of this paper includes the demonstration of current technological limitations, and the proposal of a hybrid system between human and computer, which is tested in order to explore the possibilities of digitally enhanced construction methods.
keywords	Digital Construction; Augmented Reality; Human-Machine interaction
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia17_82
id	acadia17_82
authors	Andreani, Stefano; Sayegh, Allen
year	2017
title	Augmented Urban Experiences: Technologically Enhanced Design Research Methods for Revealing Hidden Qualities of the Built Environment
doi	https://doi.org/10.52842/conf.acadia.2017.082
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 82-91
summary	The built environment is a complex juxtaposition of static matter and dynamic flows, tangible objects and human experiences, physical realities and digital spaces. This paper offers an alternative understanding of those dichotomies by applying experimental design research strategies that combine objective quantification and subjective perception of urban contexts. The assumption is that layers of measurable datasets can be afforded with personal feedback to reveal "hidden" characteristics of cities. Drawing on studies from data and cognitive sciences, the proposed method allows us to analyze, quantify and visualize the individual experience of the built environment in relation to different urban qualities. By operating in between the scientific domain and the design realm, four design research experiments are presented. Leveraging augmenting and sensing technologies, these studies investigate: (1) urban attractors and user attention, employing eye-tracking technologies during walking; (2) urban proxemics and sensory experience, applying proximity sensors and EEG scanners in varying contexts; (3) urban mood and spatial perception, using mobile applications to merge tangible qualities and subjective feelings; and (4) urban vibe and paced dynamics, combining vibration sensing and observational data for studying city beats. This work demonstrates that, by adopting a multisensory and multidisciplinary approach, it is possible to gain a more human-centered, and perhaps novel understanding of the built environment. A lexicon of experimented urban situations may become a reference for studying different typologies of environments from the user experience, and provide a framework to support creative intuition for the development of more engaging, pleasant, and responsive spaces and places.
keywords	design methods; information processing; art and technology; hybrid practices
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_234
id	ecaade2017_234
authors	Benetti, Alberto, Favargiotti, Sara and Ricci, Mos?
year	2017
title	RE.S.U.ME. - REsilient and Smart Urban MEtabolism
doi	https://doi.org/10.52842/conf.ecaade.2017.1.1113
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 1113-1120
summary	New technologies and uncontrolled open-data policies lead public to a new way of approaching the built environment. To enlarge the competences of the professionals that work within the cities, we believe that providing a deep and dynamic knowledge on the heritage and urban built environment is the more effective solution to offer a unique support to the needs. By providing a boosted geographical database with detailed information about the status of each building, we aim to support the professional by providing a neat vision about vacant buildings available citywide. We think this knowledge is an important asset in covering every kind of public requests: from flat to rent to an abandoned building to restore or to drive better investors. The city of Trento will be the pilot project to test these statements.We studied the phenomenon of pushing new constructions rather investing on the reuse of abandoned buildings with the consequences of unsustainable land use. To address the work we adopted a comprehensive approach across the fields of urbanism, ICT engineering and social sciences. We believe that sharing knowledge and know-hows with municipalities, agencies, and citizens is the way to support better market strategies as well as urban transformation policies.
keywords	Information Technology; Urban Metabolism; Re-cycle; Urban Reserves; Policy Decision-Making; Data-driven Analysis
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_098
id	ecaade2017_098
authors	Bieg, Kory
year	2017
title	The Interplay of Figures Using Superimposed Arrays
doi	https://doi.org/10.52842/conf.ecaade.2017.2.399
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 399-406
summary	This paper introduces the theoretical considerations underlying the design of a digitally designed and Computer Numerically Controlled (CNC) fabricated public installation project in the city of Austin, Texas. The project, The Creek Zipper, is an assemblage of exo?related units that symbolically reconnects two divided city neighborhoods, establishes a new relationship between the synthetic and natural, and inflates a two?dimensional graphic into a three?dimensional form. The project can be clearly read as a whole from a distance, but as one approaches, the legibility of each part begins to overwhelm the perception of the whole. As the form of the whole dissipates, the project gains a field?like presence, revealing different sets of discrete figures nested within the larger whole. The Creek Zipper addresses these multiple overlapping dichotomies that act as design generators and promote a dynamic expression of the project.
keywords	Array; CNC; Part Whole; Curve; Installation; Fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2017_078
id	sigradi2017_078
authors	Brandão, Filipe; Ricardo Correia, Alexandra Paio
year	2017
title	Rhythms of Renewal of the City
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.534-540
summary	In the last few years, building renovation has gained an unprecedented relevance in Portugal, yet it is an asymmetric and urban phenomenon for the study of which, in space and in time, traditional statistic tools have limitations. Using computational tools, it is possible to generate maps that correlate building permits georeferenced data and their processing time. Using Lisbon City Hall database of planning applications and georeferenced vector information, two approaches are developed to represent the internal dynamic of renewal of the city between 2010 and 2016. These maps can be useful to improve the accessibility of planning information to citizens.
keywords	Urban renewal; Building renovation; Lisbon; Time; Representation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_407
id	ecaadesigradi2019_407
authors	Capone, Mara, Lanzara, Emanuela, Marsillo, Laura and Nome Silva, Carlos Alejandro
year	2019
title	Responsive complex surfaces manufacturing using origami
doi	https://doi.org/10.52842/conf.ecaade.2019.2.715
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 715-724
summary	Contemporary architecture is considered a dynamic system, capable of adapting to different needs, from environmental to functional ones. The term 'Adaptable Architecture' describes an architecture from which specific components can be changed in relation to external stimuli. This change could be executed by the building system itself, transformed manually or it could be any other ability to be transformed by external forces (Leliveld et al.2017). Adaptability concept is therefore linked to motion and to recent advances in kinetic architecture. In our research we are studying the rules that we can use to design a kinetic architecture using origami. Parametric design allows us to digitally simulate the movement of origami structures, we are testing algorithmic modeling to generate doubly curvature surfaces starting from a designed surface and not from the process. Our main goal is to study the relationship between geometry, motion and shape. We are interested, in particular, in complex surface manufacture using origami technique to design a kinetic and reactive ceiling.
keywords	Origami; complex surface manufacture; responsive architecture; Applied Geometry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaade2017_027
id	ecaade2017_027
authors	Carl, Timo, Schein, Markus and Stepper, Frank
year	2017
title	Sun Shades - About Designing Adaptable Solar Facades
doi	https://doi.org/10.52842/conf.ecaade.2017.2.165
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 165-174
summary	External shading structures are a well-established typology for reducing solar heat loads. A major disadvantage is their inflexible nature, blocking views from inside and desired solar radiation for seasons with less sunshine hours. An adaptive approach on the other end can accommodate dynamic environmental exchange and user control. Furthermore, kinetic movement has great potential to create expressive spatial structures. However, such typologies are inherently complex. This paper presents the design process for two novel adaptive façade typologies, conducted on an experimental level in an educational context. Moreover, we will discuss the conception of a suitable methodological framework, which we applied to engage the complexity of this design task. Thereby we will highlight the importance of employing various methods, combining analogue and computational models not in a linear sequence, but rather in an overlapping, iterative way to create an innovation friendly design setting. The Sun Shades project offers insight into the relationships between design potentials inherent in adaptable structures and the advantages and limitation of computational methods employed to tackle them.
keywords	computational design methodology; performance-based design; associative geometry modelling; solar simulation; physical form-finding; design theory
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2017_113
id	caadria2017_113
authors	Huang, Weixin, Lin, Yuming and Wu, Mingbo
year	2017
title	Spatial-Temporal Behavior Analysis Using Big Data Acquired by Wi-Fi Indoor Positioning System
doi	https://doi.org/10.52842/conf.caadria.2017.745
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 745-754
summary	Understanding of people's spatial behavior is fundamental to architectural and urban design. However, traditional investigation methods applied in environmental behavior studies is highly limited regarding the amount of samples and regions it covers, which is not sufficient for the exploration of complex dynamic human behaviors and social activities in architectural space. Only recently the developments in indoor positioning system (IPS) and big data analysis technique have made it possible to conduct a full-time, full-coverage study on human environmental behavior. Among the variety IPS systems, the Wi-Fi IPS system is increasingly widely used because it is easy to be applied with acceptable cost. In this paper, we analyzed a 60-days anonymized data set, collected by a Wi-Fi IPS system with 110 Wi-Fi access points. The analysis revealed interesting patterns on people's behavior besides temporal spatial distribution, ranging from the cyclical fluctuation in human flow to behavioral patterns of sub-regions, some of which are not easy to be identified and interpreted by the traditional field observation. Through this case study, behavioral data from IPS system has exhibited great potential in bringing about profound changes in the study of environmental behavior.
keywords	environmental behavior study; Wi-Fi; indoor positioning system; big data; spatial temporal behavior; ski resort
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2017_149
id	ecaade2017_149
authors	Jahanara, Alireza and Fioravanti, Antonio
year	2017
title	Kinetic Shading System as a means for Optimizing Energy Load - A Parametric Approach to Optimize Daylight Performance for an Office Building in Rome
doi	https://doi.org/10.52842/conf.ecaade.2017.2.231
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 231-240
summary	Current research, as a part of on-going PhD research, explores the possibilities of dynamic pattern inspired from biomimetic design and presents a structured framework for light to manage strategies. The experiment stresses the improvement of daylight performance through the design and motion of kinetic facades using various integrated software.The impact of kinetic motion of hexagonal pattern was studied by integrating triangle and triangle covering through blooming pyramids on south-facing skin to control the daylight distribution, using a parametric simulation technique. The simulation was carried out for a south oriented façade of an office room in Rome, Italy over three phases. The first optimized results represent the static base case, which were compared to the other two proposed dynamic models in this research. Results demonstrate that dynamic façade achieved a better daylighting performance in comparison to optimized static base case.
keywords	Bio-Inspired Pattern; Parametric Design; Dynamic Façade; Daylighting
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2017_180
id	cf2017_180
authors	Jun, Ji Won; Silverio, Matteo; Llubia, Josep Alcover; Markopoulou, Areti; Chronis; Angelos; Dubor, Alexandre
year	2017
title	Remembrane: A Shape Changing Adaptive Structure
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 180-198.
summary	This paper presents a research on adaptive kinetic structures using shape memory alloys as actuators. The target of the research is designing and building an efficient kinetic structural system that could be potentially applied at an architectural scale. The project is based on the study of tensegrity and pantograph structures as a starting point to develop multiple digital and physical models of different structural systems that can be controllably moved. The result of this design process is a performative prototype that is controllable through a web-based interface. The main contribution of this project is not any of the presented parts by themselves but the integration of all of them in the creation of a new adaptive system that allows us to envision a novel way of designing, building and experiencing architecture in a dynamic and efficient way.
keywords	Responsive Structures, Kinetic Structures, Adaptive Systems, User Interaction, Structural Optimization
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2017_118
id	caadria2017_118
authors	Kocabay, Serkan and Alaçam, Sema
year	2017
title	A Multi-Objective Genetic Algorithm Framework for Earlier Phases of Architectural Design - A Case Study
doi	https://doi.org/10.52842/conf.caadria.2017.293
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 293-302
summary	This paper presents an algorithmic framework proposal for implementation of a multi-objective genetic algorithm (MOGA) in architectural design process. Different than the previous studies, we introduce a dynamic and extendible modular framework for multiple objectives. The objective modules with different fitness functions are connected simultaneously in the Rhino/Octopus interface, after multiplication with a constant value or a variable. In this study, we discuss the potentials and limitations of MOGA in 3D form generation, implications of MOGA in a case study and the qualitative and quantitative changes in relation to the change of constant value/ the impact ratio of competing objectives. The outcomes of the case study are investigated based on its potentiality in providing feedback in the earlier phases of decision processes in design.
keywords	multi-objective; genetic algorithm; architectural design process; case study
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	cf2017_492
id	cf2017_492
authors	Kocabay, Serkan; Alaçam, Sema
year	2017
title	Algorithm Driven Design: Comparison of Single-Objective and Multi-Objective Genetic Algorithms in the Context of Housing Design
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 492-508.
summary	This paper aims to present a dynamic multi objective genetic algorithm (MOGA) framework for the purpose of generating 3D mass models in the context of housing design. The proposed MOGA framework contains static and dynamic modules such as regulations, environmental condition analysis as static, behavioral models, designer-specified goals, domain-specific goals based on building types as dynamic modules. Moreover comparison of two algorithmic approaches, implementation of a single and multiple objective genetic algorithms are compared in terms of variety and usability of the generated design solutions, fitness approximation performances and the speed of the algorithms (running time). In the scope of this study, the potentials andlimitations of the proposed MOGA framework in 3D form generation, its advantages over single objective genetic algorithm are discussed, conducted with a case study.
keywords	Multi-objective, Genetic Algorithm, Housing Design, Mass-model
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_360
id	acadia17_360
authors	L'Huillier, Nicole; Machover, Tod
year	2017
title	Spaces That Perform Themselves: Multisensory Kinetic Environment for Sonic-Spatial Composition
doi	https://doi.org/10.52842/conf.acadia.2017.360
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 360- 365
summary	Building on the understanding of music and architecture as creators of spatial experience, this paper presents a novel way of unfolding music’s spatial qualities in the physical world. Spaces That Perform Themselves arose as an innovative response to the current relationship between sound and space, where we build static spaces to contain dynamic sounds. What if we change the static parameter of spaces and start building dynamic spaces to contain dynamic sounds? This project combines architectural theories with musical mastery and computation to create an environment as kinetically undulant and emotionally varied as music itself. To achieve this, a multisensory kinetic room is built in order to augment our sonic perception through a cross-modal spatial choreography that combines sound, spatial movement, light, color and vibration. By breaking down boundaries between disciplines, the possibilities of a new type of architectural typology that morphs responsively with a musical piece can be explored. As a result, spatial and musical composition can exist as one synchronous entity. Spaces That Perform Themselves seeks to contribute a novel perspective to the discourse on leveraging today’s technology to provide a setting to enrich and augment the way we relate with the built environment. This project’s objective is to enhance our perception and challenge models of thinking by presenting a post-humanistic phenomenological encounter of the world.
keywords	design methods; information processing; education; art and technology; hybrid practices; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2018_210
id	caadria2018_210
authors	Lin, Yuqiong, Zheng, Jingyun, Yao, Jiawei and Yuan, Philip F.
year	2018
title	Research on Physical Wind Tunnel and Dynamic Model Based Building Morphology Generation Method
doi	https://doi.org/10.52842/conf.caadria.2018.2.165
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 165-174
summary	The change of the building morphology directly affects the surrounding environment, while the evaluation of these environment data becomes the main basis for the genetic iterations of the building morphology. Indeed, due to the complexity of the outdoor natural ventilation, multiple factors in the site could be the main reasons for the change of air flow. Thus, the architect is suggested to take the wind environment as the main morphology generation factor in the early stage of the building design. Based on the research results of 2017 DigitalFUTURE Wind Tunnel Visualization Workshop, a novel self-form-finding method in design infancy has been proposed. This method uses Arduino to carry out the dynamic design of the building model, which can not only connect the sensor to monitor the wind environment data, but also contribute the building model to correlate with the wind environment data in real time. The integration of the Arduino platform and the physical wind tunnel can create the possibility of continuous and real-time physical changes, data collection and wind environment simulation, using quantitative environmental factors to control building morphology, and finally achieve the harmony among the building, environment and human.
keywords	Physical wind tunnel; dynamic model; building morphology generation; environmental performance design; wind environment visualization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2017_309
id	ecaade2017_309
authors	Lo Turco, Massimiliano, Zich, Ursula, Astolfi, Arianna, Shtrepi, Louena and Botto Poaola, Matteo
year	2017
title	From digital design to physical model - Origami techniques applied to dynamic paneling shapes for acoustic performance control
doi	https://doi.org/10.52842/conf.ecaade.2017.2.077
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 77-86
summary	The recent trend toward non-standard and free form architecture has generated a lot of debate among the Scientific Community. The reasons can be found in the renewed interest in organic shapes, in addition to recent and powerful capabilities of parametric platforms. In this regard, the Visual Programming Language (VPL) interface gives a high level of freedom and control for conceiving complex shapes. The geometric problems in identifying a suitable shape have been addressed by relying on the study of Origami. The control of variable geometry has required the use of algorithmic models that ensure fast changes and free control of the model, besides a physical one made of rigid cardboard to simulate its rigid-foldability. The aim is to present a prototype of an adaptive structure, with an acoustic application, to control sound quality and perception in spaces where this has a central role, such as theatres or concert halls.
keywords	parametric modeling; generative design; shape and form studies; acoustics conditions; digital Representation
series	eCAADe
email
last changed	2022/06/07 07:59

For more results click below: