Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_189
id	ecaade2017_189
authors	Parigi, Dario, Svidt, Kjeld, Molin, Erik and Bard, Delphine
year	2017
title	Parametric Room Acoustic workflows - Review and future perspectives
doi	https://doi.org/10.52842/conf.ecaade.2017.2.603
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 603-610
summary	The paper investigates and assesses different room acoustics software and the opportunities they offer to engage in parametric acoustics workflow and to influence architectural designs. The first step consists in the testing and benchmarking of different tools on the basis of accuracy, speed and interoperability with Grasshopper 3d. The focus will be placed to the benchmarking of three different acoustic analysis tools based on raytracing. To compare the accuracy and speed of the acoustic evaluation across different tools, a homogeneous set of acoustic parameters is chosen. The room acoustics parameters included in the set are reverberation time (EDT, RT30), clarity (C50), loudness (G), and definition (D50). Scenarios are discussed for determining at different design stages the most suitable acoustic tool. Those scenarios are characterized, by the use of less accurate but fast evaluation tools to be used in early design stages, or by more accurate but slower tools for later-stage design stage detailing and delivery phases.
keywords	Geometrical Acoustics; Parametric design; Real-time acoustic analysis; Virtual reality
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2019_204
id	caadria2019_204
authors	Calixto, Victor, Gu, Ning and Celani, Gabriela
year	2019
title	A Critical Framework of Smart Cities Development
doi	https://doi.org/10.52842/conf.caadria.2019.2.685
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 685-694
summary	This paper investigates through a review of the current literature on smart cities, reflecting different concepts across different political-social contexts, seeking to contribute to the establishment of a critical framework for smart cities development. The present work provides a review of the literature of 250 selected publications from four databases (Scielo, ScienceDirect, worldwide science, and Cumincad), covering the years from 2012 to 2018. Publications were categorised by the following steps: 3RC framework proposed by Kummitha and Crutzen (2017), the main political sectors of city planning, implementation strategies, computational techniques, and organisation rules. The information was analised graphically trying to identify tendencies along the time, and also, seeking to explore future possibilities for implementations in different political-social contexts. As a case of study, Australia and Brazil were compared using the proposed framework.
keywords	smart city; smart cities; literature review
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2017_127
id	caadria2017_127
authors	Herr, Christiane M. and Fischer, Thomas
year	2017
title	Challenges to the Adoption of BIM in the Chinese AEC Industries - An Extended BIM Adoption Model
doi	https://doi.org/10.52842/conf.caadria.2017.179
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 179-187
summary	Despite strong encouragement by government guidelines and promoting efforts by the software industry, BIM is adopted at relatively slow speeds in construction industries across the world. The study presented in this paper examines the challenges to BIM adoption faced in particular in the Chinese construction industry across architecture, engineering and construction. We review recent literature addressing BIM adoption, develop a critique of common approaches to BIM adoption, and then propose our own, extended model to describe and assess BIM adoption processes. To demonstrate the model's suitability to evaluate temporal and collaborative dimensions during BIM adoption processes, we present results from a detailed survey we conducted among Chinese AEC professionals based on the extended model of BIM adoption and discuss how current Chinese BIM adoption in practice diverges from overseas BIM adoption strategies.
keywords	BIM; Chinese construction practice; BIM workflow; cross-disciplinary collaboration; AEC
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	sigradi2020_643
id	sigradi2020_643
authors	Naylor, John Osmond; Leconte, Nancy; Michel Vendryes, Franck Reginald
year	2020
title	Education to practice to ecology: A review and preliminary evaluation of a new architectural design curriculum using computational design tools and bamboo in Haiti
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 643-651
summary	There is an absence of lightweight, sustainable construction materials in contemporary Haitian construction, a fact highlighted in the disproportionate loss of life in the 2010 Port-au-Prince earthquake. Between 2014 and 2017 the authors delivered a series of architectural design workshops in Haiti to raise awareness and develop design skills for bamboo using computational design tools. This paper provides a review of these workshops and a preliminary evaluation from surveys conducted with the course participants. Results showed architectural education had changed perceptions of bamboo and showed potential positive ecological impact due to subsequent reforestation activities instigated by participants. Weaknesses were in the lack of subsequent use of parametric modelling software. Bamboo material knowledge and a new architectural design methodology have been most relevant to their professional or academic work.
keywords	Haiti, Full-culm bamboo, Architectural education, Sustainable development, Parametric design
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	cf2019_009
id	cf2019_009
authors	Veloso, Pedro; Jinmo Rhee and Ramesh Krishnamurti
year	2019
title	Multi-agent space planning: a literature review (2008-2017)
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 52-74
summary	In this paper we review the research on multi-agent space planning (MASP) during the period of 2008-2017. By MASP, we refer to space planning (SP) methods based on online mobile agents that map local perceptions to actions in the environment, generating spatial representation. We group two precedents and sixteen recent MASP prototypes into three categories: (1) agents as moving spatial units, (2) agents that occupy a space, and (3) agents that partition a space. In order to compare the prototypes, we identify the occurrence of features in terms of representation, objectives, and control procedures. Upon analysis of occurrences and correlations of features in the types, we present gaps and challenges for future MASP research. We point to the limits of current systems to solve spatial conflicts and to incorporate architectural knowledge. Finally, we suggest that behavioral learning offers a promising path for robust and autonomous MASP systems in the architectural domain.
keywords	Space planning; Agent-based modeling; Multi-agent systems; Generative systems
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
doi	https://doi.org/10.52842/conf.caadria.2017.467
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2017_149
id	caadria2017_149
authors	Dickey, Rachel
year	2017
title	Soft Systems - Rethinking Indeterminacy in Architecture as Opportunity Driven Research
doi	https://doi.org/10.52842/conf.caadria.2017.811
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 811-820
summary	The research projects in this paper examine the notion of soft systems relative to machine induced material consequences. It asks, how might we integrate processes and methods which leave tolerances for indeterminacy and flexibility into design and construction? The two projects outlined investigate change of state materials paired with automation strategies, focusing on additive processes with thermally induced material configurations and programmable matter with magnetically controlled formations.
keywords	robotics; 3d printing; digital fabrication; automation; indeterminacy
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2017_457
id	cf2017_457
authors	Erdine, Elif; Kallegias, Alexandros; Lara Moreira, Angel Fernando; Devadass, Pradeep; Sungur, Alican
year	2017
title	Robot-Aided Fabrication of Interwoven Reinforced Concrete Structures
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 457.
summary	This paper focuses on the realization of three-dimensionally interwoven concrete structures and their design process. The output is part of an ongoing research in developing an innovative strategy for the use of robotics in construction. The robotic fabrication techniques described in this paper are coupled with the computational methods dealing with geometry rationalization and material constraints among others. By revisiting the traditional bar bending techniques, this research aims to develop a novel approach by the reduction of mechanical parts for retaining control over the desired geometrical output. This is achieved by devising a robotic tool-path, developed in KUKA\|prc with Python scripting, where fundamental material properties, including tolerances and spring-back values, are integrated in the bending motion methods via a series of mathematical calculations in accord with physical tests. This research serves to demonstrate that robotic integration while efficient in manufacturing it also retains valid alignment with the architectural design sensibility.
keywords	Robotic fabrication, Robotic bar bending, Concrete composite, Geometry optimization, Polypropylene formwork
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_260
id	acadia17_260
authors	Goldman, Melissa; Myers, Carolina
year	2017
title	Freezing the Field: Robotic Extrusion Techniques Using Magnetic Fields
doi	https://doi.org/10.52842/conf.acadia.2017.260
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 260-265
summary	The introduction of robotics into the field of 3D printing allows designers and fabricators to truly print in three dimensions, focusing more on the volumetric properties of the extrusion rather than two-dimensional slicing and, furthermore, introducing forces that can defy gravity. This paper introduces a new method of robotic extrusion using magnetic fields to construct ferrostructures. Using a custom tool and ferromagnetic material, the research develops a construction process utilizing the off-plane toolpaths of a 6-axis industrial robotic arm to pull, attract, and repel material into a hardened structure. The ferromagnetic liquid forms spikes and connections around the invisible magnetic fields, and upon hardening, freezes the field into a new physical artifact. This extrusion process allows a fabrication that defies gravity. The robotic fabrication process allows microextrusions to build off of one another, scaling the result to approach an architectural scale and bringing a new freedom to the designer and the fabricator.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:51

_id	cf2017_431
id	cf2017_431
authors	Gonzalez, Paloma; Sass, Larry
year	2017
title	Constructive Design: Rule Discovery for 3D Printing Decomposed Large Objects
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 431-442.
summary	This paper presents a rule discovery process for designers that work with physically large 3D printed models. After a period of discovery, rules were formalized, then developed into operations and programmable functions used in a generative design system. Past examples of generative systems are built based on visual constraints leading to graphical outcomes. With the emergence of 3D printing, we introduce ideas for rule building based on physical constraints and outcomes. The decomposition rules are: curved surface slicing, freestanding attribute, interval patterning, edge mating, and pneumatic attribute. The freestanding attribute, the most novel rule, is based on Chilean anti-earthquake building techniques. This rule provides the greatest degree of structural stability to a model. We conclude with a discussion of results from the case study used to generate the set constructive rules. We believe this method of module generation, 3D Printing and assembles can support design prototyping and model manufacturing across scales.
keywords	Decomposition, Large Objects, 3D Printing.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_502
id	acadia17_502
authors	Rosenwasser, David; Mantell, Sonya; Sabin, Jenny
year	2017
title	Clay Non-Wovens: Robotic Fabrication and Digital Ceramics
doi	https://doi.org/10.52842/conf.acadia.2017.502
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 502- 511
summary	Clay Non-Wovens develops a new approach for robotic fabrication, applying traditional craft methods and materials to a fundamentally technical and precise fabrication methodology. This paper includes new explorations in robotic fabrication, additive manufacturing, complex patterning, and techniques bound in the arts and crafts. Clay Non-Wovens seeks to develop a system of porous cladding panels that negotiate circumstances of natural daylighting through parameters dealing with textile (woven and non-woven) patterning and line typologies. While additive manufacturing has been built predominantly on the basis of extrusion, technological developments in the field of 3D printing seldom acknowledge the bead or line of such extrusions as more than a nuisance. Blurring of recognizable layers is often seen as progress, but it does away with visible traces of a fabrication process. Historically, however, construction methods in architecture and the building industry have celebrated traces of making ranging from stone cutting to log construction. With growing interest in digital craft within the fields of architecture and design, we seek to reconcile our relationship with the extruded bead and reinterpret it as a fiber and three-dimensional drawing tool. The traditional clay coil is to be reconsidered as a structural fiber rather than a tool for solid construction. Building upon this body of robotically fabricated clay structures required the development of three distinct but connected techniques: 1. construction of a simple end effector for extrusion; 2. development of a clay body and; 3. using computational design tools to develop formwork and toolpath geometries.
keywords	design methods; information processing; fabrication; digital craft; manual craft; prototyping
series	ACADIA
email
last changed	2022/06/07 07:56

_id	sigradi2017_055
id	sigradi2017_055
authors	Jipa, Andrei; Mathias Bernhard, Nicolas Ruffray, Dr. Timothy Wangler, Prof. Dr. Flatt, Robert; Benjamin Dillenburger
year	2017
title	SkelETHon Formwork - 3D Printed Plastic Formwork for Load-Bearing Concrete Structures
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.379-387
summary	The imperative need for complex geometries in architecture is driving innovation towards an unconstrained fabrication freedom in building components. Fabrication constraints are a critical obstacle when material efficiency through complex, optimized topologies is sought. To address this constraint, this research investigates the use of 3D printed plastic formwork for fibre reinforced concrete at large scale. This novel construction method makes complex topologies and precise details possible for full-scale, load bearing structures. To demonstrate its potential applications, SkelETHon —a functional four-meter-long concrete canoe— was designed, built and raced in a regatta on the Rhine river (Figure 1).
keywords	Concrete; 3D Printing; Formwork; Digital Fabrication; Canoe;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_049
id	sigradi2017_049
authors	Braida, Frederico; Cheyenne Azevedo, Izabela Ferreira, Janaina Castro, Janaina Castro
year	2017
title	Projetando com blocos de montar: Residências mínimas no contexto da cidade contemporânea [Design with building blocks: Compact homes in the context of the contemporary city]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.335-343
summary	This paper presents the results of the creation of a game, composed of building blocks, conceived as didactic material for the minimum residences design. The game was designed to be produced by rapid prototyping and digital manufacturing resources. Methodologically, the research was based on both a literature review and an empirical research on the use of a set of building blocks. The text shows the critical analysis and reflections on the results achieved with a workshop entitled "Designing compact homes with building blocks".
keywords	Building blocks; Rapid prototyping; Digital fabrication; Education; Architecture.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2021_103
id	ecaade2021_103
authors	Hussein, Hussein E. M., Agkathidis, Asterios and Kronenburg, Robert
year	2021
title	Towards a Free-form Transformable Structure - A critical review for the attempts of developing reconfigurable structures that can deliver variable free-form geometries
doi	https://doi.org/10.52842/conf.ecaade.2021.2.381
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 381-390
summary	In continuation of our previous research (Hussein, et al., 2017), this paper examines the kinetic transformable spatial-bar structures that can alter their forms from any free-form geometry to another, which can be named as Free-form transformable structures (FFTS). Since 1994, some precedents have been proposed FFTS for many applications such as controlling solar gain, providing interactive kinetic forms, and control the users' movement within architectural/urban spaces. This research includes a comparative analysis and a critical review of eight FFTS precedents, which revealed some design and technical considerations, issues, and design and evaluation challenges due to the FFTS ability to deliver infinite unpredictable form variations. Additionally, this research presents our novel algorithmic framework to design and evaluate the infinite form variations of FFTS and an actuated prototype that achieved the required movement. The findings of this study revealed some significant design and technical challenges and limitations that require further research work.
keywords	Kinetic transformable structures; finite element analysis; form-finding; deployable structures; Grasshopper 3D; Karamba 3D
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_p02
id	ecaade2018_p02
authors	Kepczynska-Walczak, Anetta and Martens, Bob
year	2018
title	Digital Heritage - Special Panel Session
doi	https://doi.org/10.52842/conf.ecaade.2018.1.039
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-44
summary	According to eCAADe's mission, the exchange and collaboration within the area of computer aided architectural design education and research, while respecting the pedagogical approaches in the different schools and countries, can be regarded as a core activity. The current session follows up on the first Contextualised Digital Heritage Workshop (CDHW) held on the occasion of eCAADe 2016 in Oulu (D. di Mascio et.al.) This event was thought to represent the first of a series of future contextualized digital heritage workshops and hence, the name Oulu interchangeable with the name of any other city or place. The second CDHW took place in the framework of CAADRIA 2017 in Suzhou (D. di Mascio & M.A. Schnabel) and focussed on sharing and dissemination of heritage information and personal experiences, such as narratives.The primary objective for the 2018 digital heritage session is to engage participants in an active discussion, not the longer format presentation of prepared positions. The round table itself is limited to short opening statements so as to ensure time is allowed for viewpoints to be exchanged and for the conference attendees to join in on the issues discussed. The panel will review past practices with the potential for guiding future direction.
keywords	Digital technology; Built heritage; Virtual archeology
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ecaade2017_244
id	ecaade2017_244
authors	Chaltiel, Stephanie, Bravo, Maite and Chronis, Angelos
year	2017
title	Digital fabrication with Virtual and Augmented Reality for Monolithic Shells
doi	https://doi.org/10.52842/conf.ecaade.2017.2.211
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 211-218
summary	The digital fabrication of monolithic shell structures is presenting some challenges related to the interface between computational design and fabrication techniques, such as the methods chosen for the suitable parametrization of the geometry based on materiality characteristics and construction constrains, the digital optimization criteria of variables, and the translation of the relevant code used for digital fabrication. Specifically, the translation from the digital to the physical when a definite materiality appears during the digital fabrication process proves to be a crucial step, which is typically approached as a linear and predetermined sequence. This often-difficult step offers the potential of embedding a certain level of interactivity between the fabricator and the materialized model during the fabrication process in order to allow for real time adjustments or corrections. This paper features monolithic shell construction processes that promote a simple interface of live interaction between the fabricator and the tool control during the digital fabrication process. The implementation of novel digital and physical methods will be explored, offering the possibility of being combined with automated fabrication actions controlled by real time inputs with virtual reality [VR] influenced by 3d scanning and 3d CAD programs, and the possibility of incorporating augmented reality [AR].
keywords	virtual reality; augmented reality; monolithic shells
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2019_657
id	caadria2019_657
authors	Chen, Zhewen, Zhang, Liming and Yuan, Philip F.
year	2019
title	Innovative Design Approach to Optimized Performance on Large-Scale Robotic 3D-Printed Spatial Structure
doi	https://doi.org/10.52842/conf.caadria.2019.2.451
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 451-460
summary	This paper presents an innovative approach on designing large-scale spatial structure with automated robotic 3D-printing. The incipient design approach mainly focused on optimizing structural efficiency at an early design stage by transform the object into a discrete system, and the elements in this system contains unique structural parameters that corresponding to its topology results of stiffness distribution. Back in 2017, the design team already implemented this concept into an experimental project of Cloud Pavilion in Shanghai, China, and the 3D-printed spatial structure was partitioned into five zones represent different level of structure stiffness and filled with five kinds of unit toolpath accordingly. Through further research, an upgrade version, the project of Cloud Pavilion 2.0 is underway and will be completed in January 2019. A detailed description on innovative printing toolpath design in this project is conducted in this paper and explains how the toolpath shape effects its overall structural stiffness. This paper contributes knowledge on integrated design in the field of robotic 3D-printing and provides an alternative approach on robotic toolpath design combines with the optimized topological results.
keywords	3D-Printing; Robotic Fabrication; Structural Optimization; Discrete System; Toolpath Design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_195
id	ecaade2017_195
authors	Collins, Jeffrey and Gentry, Russell
year	2017
title	KBAD - Knowledge Base for Architectural Detailing
doi	https://doi.org/10.52842/conf.ecaade.2017.2.657
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 657-666
summary	This paper examines the current state of the conventional Design-Bid-Build project, wherein design intentions are manually translated to construction directives by subcontractors based on industry-specific details. This process exacerbates a dilemma in design and construction; that often the designer may be unaware of certain details that are involved in fabricating and assembling building components. Research for Knowledge Base for Architectural Detailing (KBAD) proposes a system that takes advantage of current CAD software and programming language, bringing together the information provided by and important to the design team with the data required by the subcontractor to accurately produce architectural components, during the design phases of a project. The trade of architectural precast concrete is used to demonstrate the potential of such a system. Solid modeling, visual scripting, and programming language techniques working towards KBAD are described. Possible variations of architectural precast concrete panels, detailed with window openings, reveals, and embed plates, are presented.
keywords	BIM; HCI; Collaboration
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: