Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 29

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_089
id	ecaade2017_089
authors	Petrš, Jan, Havelka, Jan, Florián, Miloš and Novák, Jan
year	2017
title	MoleMOD - On Design specification and applications of a self-reconfigurable constructional robotic system
doi	https://doi.org/10.52842/conf.ecaade.2017.2.159
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 159-166
summary	The paper explores the use of in-house developed self-reconfigurable modular robotic system in civil construction activities and investigates a concept where an arbitrary Civil Engineering structure or a daily use industrial product are self-assembled from a number of self-reconfigurable composite blocks. The system extends current range of modular robot systems (mDrs) where autonomous modules self-assemble into a wide variety of forms. However, contrary to conventional mDrs, MoleMOD has not mechatronic actuating parts permanently fixed to each individual module. The MoleMOD actuators are separable and operate inside the modules, tight them together or relocate them to required configuration. It significantly reduces number of expensive mechatronics parts and the environment the actuators operate. Although MoleMOD focuses on architecture, it can take over other mDrs tasks as research and rescue. This paper describes properties, advantages, foreseen applications, and basic design specifications of the second generation prototype.
keywords	Modular robotic systems; Mobile robotic systems; Adaptive architecture; MoleMOD; Smart materials and structures; Multi-robot systems
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac201715106
id	ijac201715106
authors	Cardoso Llach, Daniel; Ardavan Bidgoli and Shokofeh Darbari
year	2017
title	Assisted automation: Three learning experiences in architectural robotics
source	International Journal of Architectural Computing vol. 15 - no. 1, 87-102
summary	Fueled by long-standing dreams of both material efficiency and aesthetic liberation, robots have become part of mainstream architectural discourses, raising the question: How may we nurture an ethos of visual, tactile, and spatial exploration in technologies that epitomize the legacies of industrial automation—for example, the pursuit of managerial efficiency, control, and an ever-finer subdivision of labor? Reviewing and extending a growing body of research on architectural robotics pedagogy, and bridging a constructionist tradition of design education with recent studies of science and technology, this article offers both a conceptual framework and concrete strategies to incorporate robots into architectural design education in ways that foster a spirit of exploration and discovery, which is key to learning creative design. Through reflective accounts of three learning experiences, we introduce the notions “assisted automation” and “robotic embodiment” as devices to enrich current approaches to robot–human design, highlighting situated and embodied aspects of designing with robotic machines.
keywords	Design education, architectural robotics, computational design, robot–human collaboration, studies of science and technology
series	other
type	normal paper
email
last changed	2019/08/02 08:28

_id	ecaade2017_229
id	ecaade2017_229
authors	Decker, Martina
year	2017
title	Soft Human Computer Interfaces - Towards Soft Robotics in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.2.739
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 739-744
summary	The emergence of media infused facades and new human computer interfaces have been of great interest in architecture in the recent decades. Most of the emerging examples are geared towards a multi-dimensional graphical output and most commonly stimulate our sense of sight. This paper explores recent developments in soft robotics and material sciences, developed at the Material Dynamics Lab at NJIT, that will allow the human computer interfaces to engage its users by captivating a multitude of senses simultaneously. Furthermore, this paper will contemplate future trajectories for the novel material strategies to improve human-computer or human-robot interaction, that one day may lead to truly robotic architectures.
keywords	Soft Robotics; Nanotechnology; Smart Materials; Robotic Architecture; Human Computer Interfaces (HCI); Graphical User Interfaces (GUI) to Tangible User Interfaces (TUI)
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2017_457
id	cf2017_457
authors	Erdine, Elif; Kallegias, Alexandros; Lara Moreira, Angel Fernando; Devadass, Pradeep; Sungur, Alican
year	2017
title	Robot-Aided Fabrication of Interwoven Reinforced Concrete Structures
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 457.
summary	This paper focuses on the realization of three-dimensionally interwoven concrete structures and their design process. The output is part of an ongoing research in developing an innovative strategy for the use of robotics in construction. The robotic fabrication techniques described in this paper are coupled with the computational methods dealing with geometry rationalization and material constraints among others. By revisiting the traditional bar bending techniques, this research aims to develop a novel approach by the reduction of mechanical parts for retaining control over the desired geometrical output. This is achieved by devising a robotic tool-path, developed in KUKA\|prc with Python scripting, where fundamental material properties, including tolerances and spring-back values, are integrated in the bending motion methods via a series of mathematical calculations in accord with physical tests. This research serves to demonstrate that robotic integration while efficient in manufacturing it also retains valid alignment with the architectural design sensibility.
keywords	Robotic fabrication, Robotic bar bending, Concrete composite, Geometry optimization, Polypropylene formwork
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	sigradi2017_039
id	sigradi2017_039
authors	González Böhme, Luis Felipe; Francisco Javier Quitral Zapata, Sandro Maino Ansaldo, Marcela Hurtado Saldías
year	2017
title	Reconstrucción robotizada del patrimonio arquitectónico chileno en madera [Robotic reconstruction of Chilean wooden architectural heritage]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.267-272
summary	We present a proof of concept of parametric 3D models of fully associative geometry and milling tool paths for the robotic machining of traditional timber joints, using a visual robot-programming environment integrated into a popular CAD software. A representative sample of traditional timber joints was obtained from a field survey conducted in Valparaíso, Chile. Each specimen was theoretically validated in nearly half a hundred carpentry treatises and manuals corresponding to the historical period in which the surveyed buildings were built. Parametric robotic milling prototypes were experimentally validated in manufacturing process using two industrial robots with different spindles and cutting tools.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_210
id	ecaade2017_210
authors	Jimenez Garcia, Manuel, Soler, Vicente and Retsin, Gilles
year	2017
title	Robotic Spatial Printing
doi	https://doi.org/10.52842/conf.ecaade.2017.2.143
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 143-150
summary	There has been significant research into large-scale 3D printing processes with industrial robots. These were initially used to extrude in a layered manner. In recent years, research has aimed to make use of six degrees of freedom instead of three. These so called "spatial extrusion" methods are based on a toolhead, mounted on a robot arm, that extrudes a material along a non horizontal spatial vector. This method is more time efficient but up to now has suffered from a number of limiting geometrical and structural constraints. This limited the formal possibilities to highly repetitive truss-like patterns. This paper presents a generalised approach to spatial extrusion based on the notion of discreteness. It explores how discrete computational design methods offer increased control over the organisation of toolpaths, without compromising design intent while maintaining structural integrity. The research argues that, compared to continuous methods, discrete methods are easier to prototype, compute and manufacture. A discrete approach to spatial printing uses a single toolpath fragment as basic unit for computation. This paper will describe a method based on a voxel space. The voxel contains geometrical information, toolpath fragments, that is subsequently assembled into a continuous, kilometers long path. The path can be designed in response to different criteria, such as structural performance, material behaviour or aesthetics. This approach is similar to the design of meta-materials - synthetic composite materials with a programmed performance that is not found in natural materials. Formal differentiation and structural performance is achieved, not through continuous variation, but through the recombination of discrete toolpath fragments. Combining voxel-based modelling with notions of meta-materials and discrete design opens this domain to large-scale 3D printing. Please write your abstract here by clicking this paragraph.
keywords	discrete; architecture; robotic fabrication; large scale printing; software; plastic extrusion
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2017_094
id	ecaade2017_094
authors	Jovanovic, Marko, Vucic, Marko, Mitov, Dejan, Tepavèeviæ, Bojan, Stojakovic, Vesna and Bajsanski, Ivana
year	2017
title	Case Specific Robotic Fabrication of Foam Shell Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.2.135
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 135-142
summary	Most recent developments in the design of free form shells pursue new approaches in digital fabrication based on material properties and construction-aware design. In this research we proposed an alternative approach based on implementation of expanded polystyrene (EPS), a non-standard material for shells, in the process of industrial robot fabrication that enables fast and precise cutting of building elements. Main motivation for using EPS as a building material was driven by numerous advantages when compared to commonly used materials such as: recycleability, cost-efficiency, high earthquake resistance, durability and short assembly time. We describe case specific fabrication approach based on numerous production constraints (size of the panels, limited robot workspace, in situ conditions) that directly design the process.
keywords	computational design; shell structures; robotic fabrication; hot-wire cutting; multi-robot control
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia17_382
id	acadia17_382
authors	Melenbrink, Nathan; Kassabian, Paul; Menges, Achim; Werfel, Justin
year	2017
title	Towards Force-aware Robot Collectives for On-site Construction
doi	https://doi.org/10.52842/conf.acadia.2017.382
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 382- 391
summary	Due to the irregular and variable environments in which most construction projects take place, the topic of on-site automation has previously been largely neglected in favor of off-site prefabrication. While prefabrication has certain obvious economic and schedule benefits, a number of potential applications would benefit from a fully autonomous robotic construction system capable of building without human supervision or intervention; for example, building in remote environments, or building structures whose form changes over time. Previous work using a swarm approach to robotic assembly generally neglected to consider forces acting on the structure, which is necessary to guarantee against failure during construction. In this paper we report on key findings for how distributed climbing robots can use local force measurements to assess aspects of global structural state. We then chart out a broader trajectory for the affordances of distributed on-site construction in the built environment and position our contributions within this research agenda. The principles explored in simulation are demonstrated in hardware, including solutions for force-sensing as well as a climbing robot.
keywords	material and construction; physics; construction/robotics; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ijac201715105
id	ijac201715105
authors	Nahmad Vazque, Alicia and Wassim Jabi
year	2017
title	Investigations in robotic-assisted design: Strategies for symbiotic agencies in material-directed generative design processes
source	International Journal of Architectural Computing vol. 15 - no. 1, 70-86
summary	The research described in this article utilises a phase-changing material, three-dimensional scanning technologies and a six-axis industrial robotic arms as vehicles to enable a novel framework where robotic technology is utilised as an ‘amplifier’ of the design process to realise geometries that derive from both constructive visions and architectural visions through iterative feedback loops between them. The robot in this scenario is not a fabrication tool but the enabler of an environment where the material, robotic and human agencies interact. This article describes the exploratory research for the development of a dialogic design process, sets the framework for its implementation, carries out an evaluation based on designer use and concludes with a set of observations. One of the main findings of this article is that a deeper collaboration that acknowledges the potential of these tools, in a learning-by-design method, can lead to new choreographies for architectural design and fabrication.
keywords	Robotic fabrication, human-machine networks, digital design, agency
series	other
type	normal paper
email
last changed	2019/08/02 08:28

_id	acadia17_456
id	acadia17_456
authors	Page, Mitchell
year	2017
title	A Robotic Fabrication Methodology for Dovetail and Finger Jointing: An Accessible & Bespoke Digital Fabrication Process for Robotically-Milled Dovetail & Finger Joints
doi	https://doi.org/10.52842/conf.acadia.2017.456
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 456- 463
summary	Since the advent of industrialized processes in modern construction industries, the development of and relationship between computer-aided tools of design and computer-controlled tools of fabrication has steadily yielded new and innovative construction methodologies. Whilst industry has adopted many of these innovations for use by highly efficient machines and flexible processes, their operation is often highly dependent on industrial scales of production, and thus often inaccessible for small-scale, bespoke and affordable application. The prototype integrated joint milling methodology, case study and open-source software plugin ‘Dove’ presented in this paper, explores the efficacy of algorithmic processes in dynamically generating complex tooling paths and machine code for fabrication of bespoke dovetail and finger joints on a 6-axis industrial robot. The versatility, speed and precision of 6-axis robotic milling, allows us to liberate the efficiency, integrity and aesthetic of the dovetail and finger joint types from traditional application, and apply them to new architectures involving mass-customisation, complex form, and diverse materialities. In the development of full-immersion milling toolpaths and back-face filleting techniques that drastically reduce cutting times, tool path complexity and material waste, this study seeks to build upon past and current research by proposing a comparatively simple, efficient and more intuitive approach to robotically-fabricated integrated jointing for application at a variety of scales.
keywords	material and construction; fabrication; construction/robotics; digital craft; manual craft
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ecaade2017_124
id	ecaade2017_124
authors	Pantazis, Evangelos and Gerber, David
year	2017
title	Emergent order through swarm fluctuations - A framework for exploring self-organizing structures using swarm robotics
doi	https://doi.org/10.52842/conf.ecaade.2017.1.075
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 75-84
summary	In modern architecture, construction processes are based on top down planning, yet in nature but also in vernacular architecture, the shape of shelters/nests is the result of evolutionary material processes which takes place without any global coordination or plan. This work presents a framework for exploring how self-organizing structures can be achieved in a bottom up fashion by implementing a swarm of simple robots(bristle bots). The robots are used as a hardware platform and operate in a modular 2D arena filled with differently shaped passive building blocks. The robots push around blocks and their behaviour can be programmed mechanically by changing the geometry of their body. Through physical experimentation and video analysis the relationships between the properties of the emergent patterns (size, temporal stability) and the geometry of the robot/parts are studied. This work couples a set of agent based design tools with a robust robotic system and a set of analysis tools for generating and actualising emergent 2D structures.
keywords	Multi Agent Systems; Generative Design; Swarm Robotics; Self-organizing patterns
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_225
id	ecaade2017_225
authors	Rossi, Andrea and Tessmann, Oliver
year	2017
title	Geometry as Assembly - Integrating design and fabrication with discrete modular units
doi	https://doi.org/10.52842/conf.ecaade.2017.2.201
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 201-210
summary	This paper proposes a design and fabrication approach based on the conceptualization of architectural formations as spatial assemblies of discrete building blocks to be aggregated through custom robotic procedures. Such strategy attempts to create synergies between different technological methods and to define a new and open design space where discrete design, serial prototyping and robotic assembly can be exploited to create complex reconfigurable structures. With the aim to allow users to explore the field of discrete geometries for architectural application without need for prior programming knowledge, we developed a software framework for representing and designing with discrete elements, different digital fabrication techniques integrated with conventional production processes for serial prototyping of repetitive units, and custom robotic fabrication routines, allowing a direct translation from aggregated geometry to assembly toolpath. Together these methods aim at creating a more direct connection between design and fabrication, relying on the idea of discrete elements assembly and on the parallel between modular design and modularized robot code generation.
keywords	Digital Materials; Robotic Assembly; Discrete Design; Modular Fabrication; Design Tools
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia17_522
id	acadia17_522
authors	Sarafian, Joseph; Culver, Ronald; Lewis, Trevor S.
year	2017
title	Robotic Formwork in the MARS Pavilion: Towards The Creation Of Programmable Matter
doi	https://doi.org/10.52842/conf.acadia.2017.522
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 522- 533
summary	The proliferation of parametric tools has allowed for the design of previously impossible geometry, but the construction industry has failed to keep pace. We demonstrate the use of industrial robots to disrupt the ancient process of casting concrete and create an adjustable formwork capable of generating various cast components based on digital input, crafting a new approach to “programmable matter.” The resulting research delineates a novel methodology to facilitate otherwise cost-prohibitive, even impossible design. The MARS Pavilion employs this methodology in a building-sized proof of concept where manipulating fabric with industrial robots achieves previously unattainable precision while casting numerous connective concrete components to form a demountable lattice structure. The pavilion is the result of parametric form finding, in which a catenary structure ensures that the loads are acting primarily in compression. Every concrete component is unique, yet can be assembled together with a 1/16-inch tolerance. Expanding Culver & Sarafian’s previous investigations, industrial robot arms are sent coordinates to position fabric sleeves into which concrete is poured, facilitating a rapid digital-to-physical casting process. With this fabrication method, parametric variation in design is cost-competitive relative to other iterative casting techniques. This digital breakthrough necessitated analogue material studies of rapid-setting, high-strength concrete and flexible, integral reinforcing systems. The uniquely shaped components are coupled with uniform connectors designed to attach three limbs of concrete, forming a highly stable, compressive hex-grid shell structure. A finite element analysis (FEA) was a critical step in the structural engineering process to simulate various load scenarios on the pavilion and drive the shape of the connective elements to their optimal form.
keywords	material and construction; fabrication; form finding
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ecaade2017_252
id	ecaade2017_252
authors	Sharif, Shani, Agrawal, Varun and Sweet, Larry
year	2017
title	Adaptive Industrial Robot Control for Designers
doi	https://doi.org/10.52842/conf.ecaade.2017.2.151
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 151-158
summary	In this research, we present a system to allow designers to adaptively control an industrial robot from within a 3D modeling environment, for the purpose of real time feedback with respect to visual imagery of the object as well as robot pose during the fabrication process. Our work uses the Kuka industrial robots due to their capability in fabrication and programmability, and the Rhino 3D modeling software with the Grasshopper plugin which allows for visual programming for designers. A Microsoft Kinect sensor is used to provide visual feedback of the part during the fabrication process. We present the methodology used to develop the system, explaining various design and architecture choices made to allow for easy use of our system, while ensuring our system is open to further extension. We also show qualitative results of the fabrication process performed using our system in order to validate that our proposed system improves the interaction and collaboration between designer and robot when performing the task, in contrast to the iterative process that is generally followed.
keywords	Human-robot collaboration; Robotic fabrication; Adaptive control; Feedback
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia17_562
id	acadia17_562
authors	Soler, Vicente; Retsin, Gilles; Jimenez Garcia, Manuel
year	2017
title	A Generalized Approach to Non-Layered Fused Filament Fabrication
doi	https://doi.org/10.52842/conf.acadia.2017.562
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 562- 571
summary	This research attempts to generalize an approach for large-scale, non-layered spatial extrusion. The methodology consists of splitting a volume, representing any arbitrary geometry, into discrete fragments with a finite number of possible arrangements. These fragments are combined in response to a series of design criteria. A novel application of graph theory algorithms is used to generate a continuous and non-overlapping path through the discrete segments. Physical and mechanical issues related to extrusion technology are explored. The computational model takes into consideration the grade and limitations of different kinds of equipment and material properties to counteract fabrication errors with the goal of speeding up the process and eliminating any need for human intervention. This approach is implemented as a cross-platform software product and programming library that can generate robot programs compatible with multiple industrial robot manufacturers. A physical prototype was fabricated using the seminal Panton Chair as a test model. We conclude that the computational approach is sound and most of the issues encountered were due to the equipment used. This will be addressed in future work.
keywords	design methods; information processing; simulation & optimization; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_039
id	ecaade2017_039
authors	Weissenböck, Renate
year	2017
title	ROBOTRACK - Linking manual and robotic design processes by motion-tracking
doi	https://doi.org/10.52842/conf.ecaade.2017.1.651
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 651-660
summary	This study investigates design opportunities fostered by fabrication processes, ex-ploring manual and robotic forming. It links handcraft and digital fabrication techniques by implementing a motion capture system. It suggests physical prototyping as a novel form of design research, operating in the dynamic field between human capabilities, machine skills, and material behavior. This paper presents a series of experimental case studies created in a seminar taught by the author at Graz University of Technology. In this course, students con-duct tactile experiments, forming panels by hand and by robot, guided by the material behav-ior and reaction. Thereby, they explore the creation of architectural form in a dynamic inter-play between human, machine and material. Movement and speed of hand forming proce-dures are recorded into digital data, and then converted into machine code, driving a 6-axis industrial robotic arm. By using the same set-up for manual and robotic forming, both pro-cesses are relatable.
keywords	design by making; digital fabrication; robotic fabrication; thermoforming; material behavior; motion tracking; craft; design education; design research; intuition; human machine interaction
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia17_660
id	acadia17_660
authors	Zivkovic, Sasa; Battaglia, Christopher
year	2017
title	Open Source Factory: Democratizing Large-Scale Fabrication Systems
doi	https://doi.org/10.52842/conf.acadia.2017.660
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 660- 669
summary	Open source frameworks have enabled widespread access to desktop-scale additive manufacturing technology and software, but very few highly hackable large-scale or industrial open source equipment platforms exist. As research trajectories continue to move towards large-scale experimentation and full-scale building construction in robotic and digital fabrication, access to industrial fabrication equipment is critical. Large-scale digital fabrication equipment usually requires extensive start-up investments which becomes a prohibitive factor for open research. Expanding on the idea of the Fab Lab as well as the RepRap movement, the Open Source Factory takes advantage of disciplinary expertise and trans-disciplinary knowledge in construction machine design accumulated over the past decade. With the goal to democratize access to large-scale industrial fabrication equipment, this paper outlines the creation of two full-scale fabrication systems: a RepRap based large-scale 3-axis open source CNC gantry and a 6-axis industrial robot system based on a decommissioned KUKA KR200/2. Both machines offer radically different economic frameworks for implementing research in advanced full scale robotic fabrication into contexts of pedagogy, the research lab, practice, or small scale local building industry. This research demonstrates that such equipment can be implemented by building on the current knowledge base in the field. If industrial robots and other large-scale fabrication tools become accessible for all, the collective sharing of research and the development of new ideas in full-scale robotic building construction can be substantially accelerated.
keywords	education, society & culture; CAM; prototyping; construction/robotics; education; digital heritage
series	ACADIA
email
last changed	2022/06/07 07:57

_id	acadia17_62
id	acadia17_62
authors	Al-Assaf, Nancy S.; Clayton, Mark J.
year	2017
title	Representing the Aesthetics of Richard Meier’s Houses Using Building Information Modeling
doi	https://doi.org/10.52842/conf.acadia.2017.062
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 62-71
summary	Beyond its widespread use for representing technical aspects and matters of building and construction science, Building information modeling (BIM) can be used to represent architectural relationships and rules drawn from aesthetic theory. This research suggests that BIM provides not only vocabulary but also syntactical tools that can be used to capture an architectural language. In a case study using Richard Meier’s language for single-family detached houses, a BIM template has been devised to represent the aesthetic concepts and relations therein. The template employs parameterized conceptual mass objects, syntactical rules, and a library of architectonic elements, such as walls, roofs, columns, windows, doors, and railings. It constrains any design produced using the template to a grammatically consistent expression or style. The template has been used as the starting point for modeling the Smith House, the Douglas House, and others created by the authors, demonstrating that the aesthetic template is general to many variations. Designing with the template to produce a unique but conforming design further illustrates the generality and expressiveness of the language. Having made the formal language explicit, in terms of syntactical rules and vocabulary, it becomes easier to vary the formal grammar and concrete vocabulary to produce variant languages and styles. Accordingly, this approach is not limited to a specific style, such as Richard Meier's. Future research can be conducted to demonstrate how designing with BIM can support stylistic change. Adoption of this approach in practice could improve the consistency of architectural designs and their coherence to defined styles, potentially increasing the general level of aesthetic expression in our built environment.
keywords	design methods; information processing; BIM; education
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2017_070
id	sigradi2017_070
authors	Borda, Adriane
year	2017
title	Tactile narratives about an architecture’s ornaments
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.479-485
summary	This study experiments a process of production of tactile representations of architectural elements of a nineteenth century mansion, house to a university museum: Museu do Doce, Pelotas, RS. The Museum uses the concept of Universal Design to guide its direct and/or mediated communication solutions. The house is distinguished by ceilings of ornamental stuccoes, evidently perceived only by the sense of sight. To describe them, a set of representations is being produced, using 3D scanning and digital fabrication technologies, using formal decomposition, and different scales, to construct a narrative to be understood by touching.
keywords	Tactile models; Universal Design; Architectural heritage; Representation technologies; Stuccoes.
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: