Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 59

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2017_009
id	caadria2017_009
authors	Yang, Xuyou, Koh, Shawn Jyh Shen, Loh, Paul and Leggett, David
year	2017
title	Robotic Variable Fabric Formwork
doi	https://doi.org/10.52842/conf.caadria.2017.873
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 873-882
summary	Casting is one of the most widely used construction techniques. Complex geometries produced via computational design processes are not easily achievable through traditional rigid formwork and are subject to increase material waste. More suitable casting techniques are required to efficiently represent digital design output. This paper presents a variable fabric formwork developed to work in conjunction with a 6-axis robotic arm for casting doubly curved panels based on hyperbolic paraboloid geometry. The variable formwork is designed to be extendable in length and width so it is able to produce a wide range of outcome within a single formwork. The interface established in the workflow allows the physical formwork and digital design to influence each other. This variable fabric formwork reduces construction waste and is a more sustainable method of casting complex geometries.
keywords	Digital fabrication; Robotic production; fabric casting
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2017_104
id	caadria2017_104
authors	Lu, Xiao, Dounas, Theodoros, Spaeth, Benjamin, Bissoonauth, Chitraj and Galobardes, Isaac
year	2017
title	Robotic Simulation of Textile as Concrete Reinforcement and Formwork
doi	https://doi.org/10.52842/conf.caadria.2017.863
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 863-872
summary	New possibilities of concrete constructions in architecture, the traditional formwork can be gradually replaced by the use of flexible textile. At the same time textile reinforcement combined with fabric formwork, introduces an innovative integrated solution in the fabrication of concrete. Based on a simple understanding of the textile weaving and knitting techniques, this project concentrates on the architectural production and the structural optimization of the textile as both concrete reinforcement and formwork. Furthermore, we present a robotic simulation of the process that develops using a series of computational experiments to research the sequence of weaving and/or knitting. Through the computational process and the design simulations, the research is firmly rooted in analog and digital exploration of material and its implementation in architecture, with particular emphasis on the convergence of robotics and computation. Note that the paper deals mainly with the software and weaving simulation as part of a larger research project, without dealing with the production of physical artefacts.
keywords	robotic weaving; textile-reinforcement; parametric design; lightweight structure; textile-reinforced concrete
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia17_522
id	acadia17_522
authors	Sarafian, Joseph; Culver, Ronald; Lewis, Trevor S.
year	2017
title	Robotic Formwork in the MARS Pavilion: Towards The Creation Of Programmable Matter
doi	https://doi.org/10.52842/conf.acadia.2017.522
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 522- 533
summary	The proliferation of parametric tools has allowed for the design of previously impossible geometry, but the construction industry has failed to keep pace. We demonstrate the use of industrial robots to disrupt the ancient process of casting concrete and create an adjustable formwork capable of generating various cast components based on digital input, crafting a new approach to “programmable matter.” The resulting research delineates a novel methodology to facilitate otherwise cost-prohibitive, even impossible design. The MARS Pavilion employs this methodology in a building-sized proof of concept where manipulating fabric with industrial robots achieves previously unattainable precision while casting numerous connective concrete components to form a demountable lattice structure. The pavilion is the result of parametric form finding, in which a catenary structure ensures that the loads are acting primarily in compression. Every concrete component is unique, yet can be assembled together with a 1/16-inch tolerance. Expanding Culver & Sarafian’s previous investigations, industrial robot arms are sent coordinates to position fabric sleeves into which concrete is poured, facilitating a rapid digital-to-physical casting process. With this fabrication method, parametric variation in design is cost-competitive relative to other iterative casting techniques. This digital breakthrough necessitated analogue material studies of rapid-setting, high-strength concrete and flexible, integral reinforcing systems. The uniquely shaped components are coupled with uniform connectors designed to attach three limbs of concrete, forming a highly stable, compressive hex-grid shell structure. A finite element analysis (FEA) was a critical step in the structural engineering process to simulate various load scenarios on the pavilion and drive the shape of the connective elements to their optimal form.
keywords	material and construction; fabrication; form finding
series	ACADIA
email
last changed	2022/06/07 07:57

_id	ecaade2017_201
id	ecaade2017_201
authors	De Azambuja Varela, Pedro and Sousa, José Pedro
year	2017
title	Fabricating Stereotomy - Variable moulds for cast voussoirs
doi	https://doi.org/10.52842/conf.ecaade.2017.2.193.2
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 193-200
summary	Recent developments in digital design and fabrication tools have led architects and researchers to renew the interest in stereotomy. This interest converges with a growing ecological and economical conscience that matches classic stereotomy raw material needs: compression resistance materials. However, material resources or prefabrication time are still major counterparts for the adoption of this construction system. This paper focuses in exploring techniques that profit from the interdependency between built form and fabrication technique, foraging methodologies that allow for stereotomic block creation with simpler resources. The premise is to explore faster, cheaper, more accessible ways to build stereotomic structures. The technique developed in this research explores alternatives to the traditional cutting of stone by expanding techniques for variable moulds to form solid voussoirs.
keywords	stereotomy; voussoir; mould; variable production; robotic fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2017_457
id	cf2017_457
authors	Erdine, Elif; Kallegias, Alexandros; Lara Moreira, Angel Fernando; Devadass, Pradeep; Sungur, Alican
year	2017
title	Robot-Aided Fabrication of Interwoven Reinforced Concrete Structures
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 457.
summary	This paper focuses on the realization of three-dimensionally interwoven concrete structures and their design process. The output is part of an ongoing research in developing an innovative strategy for the use of robotics in construction. The robotic fabrication techniques described in this paper are coupled with the computational methods dealing with geometry rationalization and material constraints among others. By revisiting the traditional bar bending techniques, this research aims to develop a novel approach by the reduction of mechanical parts for retaining control over the desired geometrical output. This is achieved by devising a robotic tool-path, developed in KUKA\|prc with Python scripting, where fundamental material properties, including tolerances and spring-back values, are integrated in the bending motion methods via a series of mathematical calculations in accord with physical tests. This research serves to demonstrate that robotic integration while efficient in manufacturing it also retains valid alignment with the architectural design sensibility.
keywords	Robotic fabrication, Robotic bar bending, Concrete composite, Geometry optimization, Polypropylene formwork
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_382
id	acadia17_382
authors	Melenbrink, Nathan; Kassabian, Paul; Menges, Achim; Werfel, Justin
year	2017
title	Towards Force-aware Robot Collectives for On-site Construction
doi	https://doi.org/10.52842/conf.acadia.2017.382
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 382- 391
summary	Due to the irregular and variable environments in which most construction projects take place, the topic of on-site automation has previously been largely neglected in favor of off-site prefabrication. While prefabrication has certain obvious economic and schedule benefits, a number of potential applications would benefit from a fully autonomous robotic construction system capable of building without human supervision or intervention; for example, building in remote environments, or building structures whose form changes over time. Previous work using a swarm approach to robotic assembly generally neglected to consider forces acting on the structure, which is necessary to guarantee against failure during construction. In this paper we report on key findings for how distributed climbing robots can use local force measurements to assess aspects of global structural state. We then chart out a broader trajectory for the affordances of distributed on-site construction in the built environment and position our contributions within this research agenda. The principles explored in simulation are demonstrated in hardware, including solutions for force-sensing as well as a climbing robot.
keywords	material and construction; physics; construction/robotics; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:58

_id	acadia17_502
id	acadia17_502
authors	Rosenwasser, David; Mantell, Sonya; Sabin, Jenny
year	2017
title	Clay Non-Wovens: Robotic Fabrication and Digital Ceramics
doi	https://doi.org/10.52842/conf.acadia.2017.502
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 502- 511
summary	Clay Non-Wovens develops a new approach for robotic fabrication, applying traditional craft methods and materials to a fundamentally technical and precise fabrication methodology. This paper includes new explorations in robotic fabrication, additive manufacturing, complex patterning, and techniques bound in the arts and crafts. Clay Non-Wovens seeks to develop a system of porous cladding panels that negotiate circumstances of natural daylighting through parameters dealing with textile (woven and non-woven) patterning and line typologies. While additive manufacturing has been built predominantly on the basis of extrusion, technological developments in the field of 3D printing seldom acknowledge the bead or line of such extrusions as more than a nuisance. Blurring of recognizable layers is often seen as progress, but it does away with visible traces of a fabrication process. Historically, however, construction methods in architecture and the building industry have celebrated traces of making ranging from stone cutting to log construction. With growing interest in digital craft within the fields of architecture and design, we seek to reconcile our relationship with the extruded bead and reinterpret it as a fiber and three-dimensional drawing tool. The traditional clay coil is to be reconsidered as a structural fiber rather than a tool for solid construction. Building upon this body of robotically fabricated clay structures required the development of three distinct but connected techniques: 1. construction of a simple end effector for extrusion; 2. development of a clay body and; 3. using computational design tools to develop formwork and toolpath geometries.
keywords	design methods; information processing; fabrication; digital craft; manual craft; prototyping
series	ACADIA
email
last changed	2022/06/07 07:56

_id	caadria2017_005
id	caadria2017_005
authors	Xia, Tian, Koh, Jing Lin, Chen, Yutong, Goh, Yi Qian and Dritsas, Stylianos
year	2017
title	Form-finding with Robotics - Fusing Physical Simulation and Digital Fabrication
doi	https://doi.org/10.52842/conf.caadria.2017.893
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 893-902
summary	We present an experimental digital design and fabrication process investigating the integration of form-finding and industrial robotics. The design process is inspired by classical experiments producing minimal surfaces and tensile structures via physical simulation. The fabrication process resembles thermoforming whereby sheets of PET material are heat treated and while in a malleable state, where the material behaves like stretchable fabric, an industrial articulated robotic arm impresses a form while the sheet is air cooled and its final shape becomes stable and rigid. The three-dimensional plastic sheets are used as molds for glass-reinforced concrete casting. The key aspects of our approach include: (a) Mold-less fabrication: the design of our robotic end-effector can produce a range of free-form geometries without need for complex mold making (b) Reusable and durable artifacts: unlike traditional physical form-finding processes where the derived form is often ephemeral or fragile our process affords the detachment of a rigid artifacts which can be digitized, used as-is or employed in (c) Multi-stage fabrication: as the form-found geometry can be directly used for processes such as casting with excellent results in terms of surface finish. We present the design and development of our system and its deployment for an installation artwork.
keywords	Form-Finding; Digital Fabrication; Architectural Robotics
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2017_101
id	ecaade2017_101
authors	Ayoub, Mohammed and Wissa, Magdi
year	2017
title	Daylight Optimization - A Parametric Study of Urban Façades Design within Hybrid Settlements in Hot-Desert Climate
doi	https://doi.org/10.52842/conf.ecaade.2017.2.193
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 193-202
summary	Unprecedented growth of hybrid settlements causes deterioration to the indoor environmental quality. Due to their narrow street-networks and fully packed urban fabric, lower floors are subjected to severe overshadow condition, which has adverse effects on the health of the inhabitants. This paper aims to investigate techniques to mitigate the under-lit indoor environment for a group of buildings with variable heights and orientations, with regard to the urban façades parameters. It reflects an intervention in an existing hybrid settlements, within hot-desert climate, to alter façades configurations for daylight optimization, and ultimately recover the lost indoor quality of users in such contexts.
keywords	Daylight Optimization; Urban Façade; Simulation; Hybrid Settlements ; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_054
id	ecaade2017_054
authors	Abramovic, Vasilija, Glynn, Ruairi and Achten, Henri
year	2017
title	ROAMNITURE - Multi-Stable Soft Robotic Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.1.327
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 327-336
summary	The rise in robotics is not only changing fabrication research in architecture but increasingly providing opportunities for animating the materiality of architecture, offering responsive, performative and adaptive design possibilities for the built environment. A fundamental challenge with robotics is its suitability to safe, and comfortable use in proximity to the human body. Here we present the preliminary results of the Roamniture Project, a hybrid approach to developing kinetic architecture based on a combination of rigid and soft body dynamics.
keywords	Kinetic Architecture; Soft Robotics; Soft Architecture; Furniture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ecaade2017_184
id	ecaade2017_184
authors	Almeida, Daniel and Sousa, José Pedro
year	2017
title	Tradition and Innovation in Digital Architecture - Reviewing the Serpentine Gallery Pavilion 2005
doi	https://doi.org/10.52842/conf.ecaade.2017.1.267
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 267-276
summary	Please write your aToday, in a moment when digital technologies are taking command of many architectural design and construction processes, it is important to examine the place and role of traditional ones. Designed by Álvaro Siza and Eduardo Souto de Moura in collaboration with Cecil Balmond, the Serpentine Gallery Pavilion 2005 reflects the potential of combining those two different approaches in the production of innovative buildings. For inquiring this argument, this paper investigates the development of this project from its conception to construction with a double goal: to uncover the relationship between analogical and digital processes, and to understand the architects' role in a geographically distributed workflow, which involved the use of computational design and robotic fabrication technologies. To support this examination, the authors designed and fabricated a 1:3 scale prototype of part of the Pavilion, which also served to check and reflect on the technological evolution since then, which is setting different conditions for design development and collaboration.bstract here by clicking this paragraph.
keywords	Serpentine Gallery Pavilion; Computational Design; Digital Fabrication; Wooden Construction; Architectural Representation;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2017_443
id	cf2017_443
authors	Araya, Sergio; Veliz, Felipe; Quest, Sylvana; Truffello, Ricardo
year	2017
title	Igneous Tectonics: Turning disaster into resource through digital fabrication
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 443-456.
summary	This investigation aims to develop and establish digital fabrication and design techniques and protocols to process volcanic materials that have caused significant environmental and social damage, using them to reconstruct new and improved structures to replace those destroyed, palliating the negative effects of volcanic eruptions and contributing a new economic resource to affected communities. The study recovers underused material and explore its qualities, recovering lost stonemasonry skills though advanced CNC and robotic manufacturing.
keywords	Robotic manufacturing, parametric design, digital fabrication, material research, CNC stonemasonry.
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	acadia17_164
id	acadia17_164
authors	Brugnaro, Giulio; Hanna, Sean
year	2017
title	Adaptive Robotic Training Methods for Subtractive Manufacturing
doi	https://doi.org/10.52842/conf.acadia.2017.164
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 164-169
summary	This paper presents the initial developments of a method to train an adaptive robotic system for subtractive manufacturing with timber, based on sensor feedback, machine-learning procedures and material explorations. The methods were evaluated in a series of tests where the trained networks were successfully used to predict fabrication parameters for simple cutting operations with chisels and gouges. The results suggest potential benefits for non-standard fabrication methods and a more effective use of material affordances.
keywords	design methods; information processing; construction; robotics; ai & machine learning; digital craft; manual craft
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ijac201715106
id	ijac201715106
authors	Cardoso Llach, Daniel; Ardavan Bidgoli and Shokofeh Darbari
year	2017
title	Assisted automation: Three learning experiences in architectural robotics
source	International Journal of Architectural Computing vol. 15 - no. 1, 87-102
summary	Fueled by long-standing dreams of both material efficiency and aesthetic liberation, robots have become part of mainstream architectural discourses, raising the question: How may we nurture an ethos of visual, tactile, and spatial exploration in technologies that epitomize the legacies of industrial automation—for example, the pursuit of managerial efficiency, control, and an ever-finer subdivision of labor? Reviewing and extending a growing body of research on architectural robotics pedagogy, and bridging a constructionist tradition of design education with recent studies of science and technology, this article offers both a conceptual framework and concrete strategies to incorporate robots into architectural design education in ways that foster a spirit of exploration and discovery, which is key to learning creative design. Through reflective accounts of three learning experiences, we introduce the notions “assisted automation” and “robotic embodiment” as devices to enrich current approaches to robot–human design, highlighting situated and embodied aspects of designing with robotic machines.
keywords	Design education, architectural robotics, computational design, robot–human collaboration, studies of science and technology
series	other
type	normal paper
email
last changed	2019/08/02 08:28

_id	caadria2019_657
id	caadria2019_657
authors	Chen, Zhewen, Zhang, Liming and Yuan, Philip F.
year	2019
title	Innovative Design Approach to Optimized Performance on Large-Scale Robotic 3D-Printed Spatial Structure
doi	https://doi.org/10.52842/conf.caadria.2019.2.451
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 451-460
summary	This paper presents an innovative approach on designing large-scale spatial structure with automated robotic 3D-printing. The incipient design approach mainly focused on optimizing structural efficiency at an early design stage by transform the object into a discrete system, and the elements in this system contains unique structural parameters that corresponding to its topology results of stiffness distribution. Back in 2017, the design team already implemented this concept into an experimental project of Cloud Pavilion in Shanghai, China, and the 3D-printed spatial structure was partitioned into five zones represent different level of structure stiffness and filled with five kinds of unit toolpath accordingly. Through further research, an upgrade version, the project of Cloud Pavilion 2.0 is underway and will be completed in January 2019. A detailed description on innovative printing toolpath design in this project is conducted in this paper and explains how the toolpath shape effects its overall structural stiffness. This paper contributes knowledge on integrated design in the field of robotic 3D-printing and provides an alternative approach on robotic toolpath design combines with the optimized topological results.
keywords	3D-Printing; Robotic Fabrication; Structural Optimization; Discrete System; Toolpath Design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_229
id	ecaade2017_229
authors	Decker, Martina
year	2017
title	Soft Human Computer Interfaces - Towards Soft Robotics in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.2.739
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 739-744
summary	The emergence of media infused facades and new human computer interfaces have been of great interest in architecture in the recent decades. Most of the emerging examples are geared towards a multi-dimensional graphical output and most commonly stimulate our sense of sight. This paper explores recent developments in soft robotics and material sciences, developed at the Material Dynamics Lab at NJIT, that will allow the human computer interfaces to engage its users by captivating a multitude of senses simultaneously. Furthermore, this paper will contemplate future trajectories for the novel material strategies to improve human-computer or human-robot interaction, that one day may lead to truly robotic architectures.
keywords	Soft Robotics; Nanotechnology; Smart Materials; Robotic Architecture; Human Computer Interfaces (HCI); Graphical User Interfaces (GUI) to Tangible User Interfaces (TUI)
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia17_248
id	acadia17_248
authors	Felbrich, Benjamin; Fru?h, Nikolas; Prado, Marshall; Saffarian, Saman; Solly, James; Vasey, Lauren; Knippers, Jan; Menges, Achim
year	2017
title	Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long-Span Composite Structures
doi	https://doi.org/10.52842/conf.acadia.2017.248
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 248-259
summary	Fiber composite materials have tremendous potential in architectural applications due to their high strength-to-weight ratio and their ability to be formed into complex shapes. Novel fabrication processes can be based on the unique affordances and characteristics of fiber composites. Because these materials are lightweight and have high tensile strength, a radically different approach to fabrication becomes possible, which combines low-payload yet long-range machines—such as unmanned aerial vehicles (UAV)—with strong, precise, yet limited-reach industrial robots. This collaborative concept enables a scalable fabrication setup for long-span fiber composite construction. This paper describes the integrated design process and design development of a large-scale cantilevering demonstrator, in which the fabrication setup, robotic constraints, material behavior, and structural performance were integrated in an iterative design process.
keywords	material and construction; fabrication; construction; robotics
series	ACADIA
email
last changed	2022/06/07 07:50

_id	acadia17_260
id	acadia17_260
authors	Goldman, Melissa; Myers, Carolina
year	2017
title	Freezing the Field: Robotic Extrusion Techniques Using Magnetic Fields
doi	https://doi.org/10.52842/conf.acadia.2017.260
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 260-265
summary	The introduction of robotics into the field of 3D printing allows designers and fabricators to truly print in three dimensions, focusing more on the volumetric properties of the extrusion rather than two-dimensional slicing and, furthermore, introducing forces that can defy gravity. This paper introduces a new method of robotic extrusion using magnetic fields to construct ferrostructures. Using a custom tool and ferromagnetic material, the research develops a construction process utilizing the off-plane toolpaths of a 6-axis industrial robotic arm to pull, attract, and repel material into a hardened structure. The ferromagnetic liquid forms spikes and connections around the invisible magnetic fields, and upon hardening, freezes the field into a new physical artifact. This extrusion process allows a fabrication that defies gravity. The robotic fabrication process allows microextrusions to build off of one another, scaling the result to approach an architectural scale and bringing a new freedom to the designer and the fabricator.
keywords	material and construction; fabrication; construction/robotics
series	ACADIA
email
last changed	2022/06/07 07:51

_id	sigradi2017_039
id	sigradi2017_039
authors	González Böhme, Luis Felipe; Francisco Javier Quitral Zapata, Sandro Maino Ansaldo, Marcela Hurtado Saldías
year	2017
title	Reconstrucción robotizada del patrimonio arquitectónico chileno en madera [Robotic reconstruction of Chilean wooden architectural heritage]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.267-272
summary	We present a proof of concept of parametric 3D models of fully associative geometry and milling tool paths for the robotic machining of traditional timber joints, using a visual robot-programming environment integrated into a popular CAD software. A representative sample of traditional timber joints was obtained from a field survey conducted in Valparaíso, Chile. Each specimen was theoretically validated in nearly half a hundred carpentry treatises and manuals corresponding to the historical period in which the surveyed buildings were built. Parametric robotic milling prototypes were experimentally validated in manufacturing process using two industrial robots with different spindles and cutting tools.
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: