Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 536

Reformat results as: short short into frame detailed detailed into frame

_id	cf2017_128
id	cf2017_128
authors	Dietrich, Sebastian; Schneider, Sven; Demin, Dimitry
year	2017
title	RhinoRstab: Introducing and Testing a New Structural Analysis Plugin for Grasshopper3D
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 128-136.
summary	This paper presents a new open-source structural analysis plugin for Grasshopper – RhinoRstab. The plugin bridges data between the worldwide established software: Rhinoceros3d and Dlubal RSTAB. The basic idea behind the approach is to create an interactive workflow between the architectural design on the one hand and a structural analysis tool on the other hand. In contrast to RhinoRstab, other analysis tools for Grasshopper predict the structural behaviour independent of its structural capacity. Thus, additional standalone software is necessary to verify the analysis of these plugins subsequently. To test the validity of this new tool, it is compared to a similar application, namely Karamba (a widely used structural analysis plugin for Rhinoceros/Grasshopper). Both tools are tested in different scenarios. The study shows that for some elements in a structural system and some calculation methods RhinoRstab and Karamba results differ strongly. However, regarding the runtime, Karamba operates faster than RhinoRstab.
keywords	Automation, Structural Analysis, Structural Design, Optimization
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	acadia17_404
id	acadia17_404
authors	Miller, Nathan; Stasiuk, David
year	2017
title	A Novel Mesh-Based Workflow for Complex Geometry in BIM
doi	https://doi.org/10.52842/conf.acadia.2017.404
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 404- 413
summary	Various well-established digital modeling software platforms enable architectural design teams to rapidly sculpt and iterate over complex, doubly curved, and organic geometries. However, the software platforms that are used to author such geometries are rarely the same that are used for later-stage project development and delivery. For these phases of project execution, projects of even modest complexity are managed through building information modeling (BIM) software. Yet most BIM solutions are not suitable for natively handling the design of geometrically complex forms, failing to provide lightweight, responsive, or flexible authoring interfaces. A further complication is their inability to readily import or integrate any complex geometric elements or assemblies generated elsewhere. The development of improvements to interoperability between authoring and production software therefore remains an important goal in contemporary architectural practice. This paper describes a practical methodology that then engages various Application Programming Interfaces (APIs) and open-source programming tools to address the problem of interoperability for complex geometry in BIM. Specifically, it identifies meshes as a well-positioned data structure for use within the context of preparing complex design geometry for BIM production. We describe a novel technique for the efficient interoperability of complex NURBS poly-surface objects from one authoring platform, employing design meshes that cleanly capture not just geometry, but also user and procedurally derived descriptive data elements for advanced representation and analysis within a BIM production environment.
keywords	design methods; information processing; BIM
series	ACADIA
email
last changed	2022/06/07 07:58

_id	sigradi2017_034
id	sigradi2017_034
authors	Barrozo do Amaral Villares, Alexandre; Daniel de Carvalho Moreira
year	2017
title	Python on the Landscape of Programming Tools for Design and Architectural Education
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.237-241
summary	Currently most professional modeling and computer graphics software packages embed a scripting language. This is an early report on collecting data about software applications and coding tools geared towards the educational environment, preparing a listing for further evaluation and analysis of platforms. An increase in the adoption of Python as the embedded scripting syntax in many established tools can already be recognized, therefore the creation of educational materials on Python for design and architectural education merits further attention. Other insights on the educational potential of the available tools might be gained by advancing the data collection and evaluation work.
keywords	Education; Design; Architecture; Programming; Python.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2017_043
id	sigradi2017_043
authors	Griz, Cristiana; Natália Queiroz, Carlos Nome
year	2017
title	Edificação Modular: Estudo de caso e protótipo de um sistema construtivo de código aberto utilizando prototipagem rápida [Modular Building: Case study and prototype of an open source modular system using rapid prototyping]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.293-300
summary	This paper presents the research development for a base structural module for the Casa Nordeste project. Casa Nordeste is a compact housing experiment that will participate in the Solar Decathlon Latin America competition. It consists of a modular building that houses living, cooking, and sanitizing space. Developments presented are based on digital design and fabrication principles and processes, through algorithms that allow its customization. In this sense, discussions begin with a brief theoretical discussion about the concepts that underline the project: evolutionary housing; digital technologies that improve design and construction; open source construction and generative design systems. The paper finalizes by presenting and discussing developments of three different design aspects of the structural module: (a) geometry of the frames, (b) its modulation, and (c) fittings and joining mechanisms.
keywords	Digital fabrication; Rapid prototyping; Visual programming; Compact housing.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_011
id	ecaade2017_011
authors	Haeusler, M. Hank, Asher, Rob and Booth, Lucy
year	2017
title	Urban Pinboard - Development of a platform to access open source data to optimise urban planning performance
doi	https://doi.org/10.52842/conf.ecaade.2017.1.439
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 439-448
summary	In this paper we present our research to design and develop 'Urban Pinboard', a platform to optimise urban planning process and performance. We argue that second machine age general purpose technologies can now be accessed for city modelling. Based on the observation that: GIS does offer a depository that can display urban data; data sets exist but often stored at different locations; there is a discrepancy of access to planning information; and the data often are not accessible to private / public sector and the general public on one location, Urban Pinboard aims to address these problems as an integrated digital platform that enables the public, private and community sectors to connect by contributing ideas, comments and proposals on all planning issues in a single platform. The paper outlines the background research, methodology and introduces the Urban Pinboard's features to create a single source of truth for planning data.
keywords	Software development; web-based GIS platform; Urban Planning; planning data
series	eCAADe
email
last changed	2022/06/07 07:49

_id	cf2017_297
id	cf2017_297
authors	He, Yi; Schnabel, Marc Aurel; Chen, Rong; Wang, Ning
year	2017
title	A Comprehensive Application of BIM Modelling for Semi-underground Public Architecture: A Study for Tiantian Square Complex, Wuhan, China
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 297-308.
summary	The paper presents research on how Building Information Modelling (BIM) can be applied comprehensively throughout the design of an architectural project. A practical method based on BIM models that help to deal with multidisciplinary issues by integrating the design information from different sources, collaborators and project stages is formulated by adopting existing available tools. The ‘Tiantian Square’ building project in Wuhan, China combines a subway station with a commercial hug. According to the project’s size and complexity, our study focuses on the multiple cooperation of professionals from different backgrounds, including the departments of architectural design, structure (civil engineering), HVAC (Heating, Ventilation and Air Conditioning), water supply and drainage, and electrics and sustainable design. Our paper presents how the BIM model bridges between various simulation platforms through our technical system and management, including steps of transformation, simplification, analysis, reaction and improvement. Our research has helped to improve the overall efficiency and quality of the project. We generated a successful analysis-design approach for the initial design stages, which does not require in-depth analysis. It is a practical method to immediately evaluate the performance for each design alternative and provide guidelines for design modification. Finally, we discuss how the coordination of different department becomes a crucial factor as we look forward to a more open, communicative and inter-relational design and development process.
keywords	BIM, Subway Complex, Simulation, Semi-Underground Architecture
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	caadria2021_354
id	caadria2021_354
authors	Huang, Chenyu, Gong, Pixin, Ding, Rui, Qu, Shuyu and Yang, Xin
year	2021
title	Comprehensive analysis of the vitality of urban central activities zone based on multi-source data - Case studies of Lujiazui and other sub-districts in Shanghai CAZ
doi	https://doi.org/10.52842/conf.caadria.2021.2.549
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 549-558
summary	With the use of the concept Central Activities Zone in the Shanghai City Master Plan (2017-2035) to replace the traditional concept of Central Business District, core areas such as Shanghai Lujiazui will be given more connotations in the future construction and development. In the context of todays continuous urbanization and high-speed capital flow, how to identify the development status and vitality characteristics is a prerequisite for creating a high-quality Central Activities Zone. Taking Shanghai Lujiazui sub-district etc. as an example, the vitality value of weekday and weekend as well as 19 indexes including density of functional facilities and building morphology is quantified by obtaining multi-source big data. Meanwhile, the correlation between various indexes and the vitality characteristics of the Central Activities Zone are tried to summarize in this paper. Finally, a neural network regression model is built to bridge the design scheme and vitality values to realize the prediction of the vitality of the Central Activities Zone. The data analysis method proposed in this paper is versatile and efficient, and can be well integrated into the urban big data platform and the City Information Modeling, and provides reliable reference suggestions for the real-time evaluation of future urban construction.
keywords	multi-source big data; Central Activities Zone; Vitality; Lujiazui
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ijac201715202
id	ijac201715202
authors	Koutamanis, Alexander
year	2017
title	Briefing and Building Information Modelling: Potential for integration
source	International Journal of Architectural Computing vol. 15 - no. 2, 120-133
summary	The article brings together the subjects of briefing and Building Information Modelling. It considers the brief as information source for Building Information Modelling and Building Information Modelling as an environment for automating brief- related analysis and guidance. The approach is characterized by feedforward and feedback, incorporation of constraints from the brief in Building Information Modelling, connection of briefing goals to performance analysis and correlation of requirements in the brief to Building Information Modelling object properties and relations. To test the approach, 10 briefs are parsed into goals, constraints and requirements, which are then considered for integration in Building Information Modelling. As the majority of these items can become part of a model and subject to automated analyses, integration of briefing in Building Information Modelling is proposed as a viable option that can improve design and briefing performance but also signals significant changes to briefing.
keywords	Briefing, Building Information Modelling, integration, continuity, feedforward, feedback, analysis
series	other
type	normal paper
email
last changed	2019/08/02 08:29

_id	acadia17_340
id	acadia17_340
authors	Landim, Gabriele; Digiandomenico, Dyego; Amaro, Jean; Pratschke, Anja; Tramontano, Marcelo; Toledo, Claudio
year	2017
title	Architectural Optimization and Open Source Development: Nesting and Genetic Algorithms
doi	https://doi.org/10.52842/conf.acadia.2017.340
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 340- 349
summary	This research presents a general overview of performance-oriented architectural design and how the rise of parametric modeling and algorithm-aided design enable an integrated environment for project design, simulation and optimization. For optimization processes, one of the most used methods in architectural problem solving is genetic algorithms (GAs). However, as the use of GAs becomes more common in the architecture, it is possible to identify a lack of clarity about the methods and procedures operated by the algorithms. Thus, this research seeks to contribute to the field through the implementation of an open source optimization plugin whose method of implemented algorithms, a GA and a nesting algorithm, can be accessed for evaluation, improvement and adaptation to other architectural problems. In the same way, it discusses the relevance of the openness and clarity of the methods employed in optimization processes in architecture. The proposed plugin was tested in an experiment that verified the feasibility of the development of the open source plugin and the efficiency of the method in solving the chosen architectural problem.
keywords	algorithm-aided design; optimization; genetic algorithm; nesting; open source; computational / artistic cultures; generative system; simulation & optimization; design methods; information processing
series	ACADIA
email
last changed	2022/06/07 07:52

_id	caadria2017_085
id	caadria2017_085
authors	Lee, Yong-Ju, Kim, Mi-Kyoung and Jun, Han-Jong
year	2017
title	Green Standard for Energy and Environmental Design - The Development of an Assessment System Based on a Green BIM Template
doi	https://doi.org/10.52842/conf.caadria.2017.623
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 623-632
summary	To construct a building that meets the requirements of certification in terms of environmental friendliness, there must be a process that considers the certification criteria from the initial design phase. However, there are numerous complicated task performance procedures to analyse many required items in detail as well as perceive and apply the data requirements efficiently. Currently, Building Information Modeling (BIM) is gaining attention as a solution for environmental problems in architecture. BIM shows precisely how a virtual building is modelled in the real world, thereby providing an objective information and analysis through a simulation. However, the result values of BIM library or modelling may turn out differently as a result of the work environment of designers or users that is not standardized. Therefore, this study applies the modelled and extracted BIM data using the template and library established in the BIM add-in planning and design phase to review in advance the Green Standard for Energy and Environmental Design (G-SEED) assessment by item and manual input of users with the BIM-based (add-in) G-SEED assessment system, thereby providing support to enable users to establish specific strategies in designing green buildings.
keywords	GBT; G-SEED; BIM System; BIM Add-in; Apartment
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia17_366
id	acadia17_366
authors	Lin, Yuming; Huang, Weixin
year	2017
title	Behavior Analysis and Individual Labeling Using Data from Wi-Fi IPS
doi	https://doi.org/10.52842/conf.acadia.2017.366
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 366- 373
summary	It is fairly important for architects and urban designers to understand how different people interact with the environment. However, traditional investigation methods for studying environmental behavior are quite limited in their coverage of samples and regions, which are not sufficient to delve into the behavioral differences of people. Only recently, the development of indoor positioning systems (IPS) and data-mining techniques has made it possible to collect full-time, full-coverage data for behavioral difference research and individualized identification. In our research, the Wi-Fi IPS system is chosen among the various IPS systems as the data source due to its extensive applicability and acceptable cost. In this paper, we analyzed a 60-day anonymized dataset from a ski resort, collected by a Wi-Fi IPS system with 110 Wi-Fi access points. Combining this with mobile phone data and questionnaires, we revealed some interesting characteristics of tourists from different origins through spatial-temporal behavioral data, and further conducted individual labeling through supervised learning. Through this case study, temporal-spatial behavioral data from an IPS system exhibited great potential in revealing individual characteristics besides exploring group differences, shedding light on the prospect of architectural space personalization.
keywords	design methods; information processing; data mining; big data
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ecaade2017_067
id	ecaade2017_067
authors	Liu, Chenjun, Wang, Tsung-Hsien, Meagher, Mark and Peng, Chengzhi
year	2017
title	Feather-inspired social media data processing for generating developable surfaces: Prototyping an affective architecture - Prototyping an affective architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.1.181
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 181-190
summary	This paper presents the development of an interactive installation intended as a prototype of experimental affective architecture connected with social media data processing. Social moods and emotions are now spread more widely and faster than ever before due to pervasive uses of social media platforms. We explore how data processing of users' expressions and sharing of moods/emotions through social media can become a source of influences on shaping the form and behaviour of interactive architecture. The interactive prototyping method includes (1) a feather-inspired data-to-shape rule system together with the ShapeOp Library for generating strips as developable surfaces, (2) a physical computing platform built with Arduino micro-processor and shape memory alloy springs for actuation, and (3) physical model-making. As a prototype of social media aware affective architecture, an interactive installation design is proposed for a campus space where the actuation of the strip installation is linked to data processing of Twitter messages collated from users on campus. We reflect on the prototyping methodology and the implications of an architecture affected by people's expression of moods/emotions through social media.
keywords	social media data processing; developable surfaces; interactive prototyping; shape memory alloy; elastic morphing; ShapeOp
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_305
id	ecaade2017_305
authors	Luther, Mark B.
year	2017
title	The Application of Daylighting Software for Case-study Design in Buildings
doi	https://doi.org/10.52842/conf.ecaade.2017.1.629
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 629-638
summary	The application of different software, whether simple or complex, can each play a significant role in the design and decision-making on daylighting for a building. This paper, discusses the task to be accomplished, in real case studies, and how various lighting software programs are used to achieve the desired information. The message iterated throughout the paper is one that respects, and even suggests, the use of even the simplest software, that can guide and inform design decisions in daylighting. Daylighting can be complex since the position of the sun varies throughout the day and year as well as do the sky conditions for a particular location. Just because we now have the computing capacity to model every single minute of a day throughout a year, doesn't justify its task. Several projects; an architecture studio, a university office building, a school library and a gymnasium all present different tasks to be achieved. The daylighting problems, the objects and the software application and their outcomes are presented in this paper. Over a decade of projects has led to reflecting upon the importance of computing in daylighting, its staged approach and the result that it can achieve if properly applied.
keywords	Daylighting Design; Daylighting Analysis; Radiosity; Ray-tracing
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2017_063
id	caadria2017_063
authors	Ma, Yidong and Xu, Weiguo
year	2017
title	Physarealm - A Bio-inspired Stigmergic Algorithm Tool for Form-Finding
doi	https://doi.org/10.52842/conf.caadria.2017.499
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 499-508
summary	Physarum Polycephalum is a widespread eukaryotic microbe capable of producing effective networks between food particles to solve spatial planning problems. This paper investigates a previous algorithm for simulating Physarum Polycephalum. An open-source tool named Physarealm is developed for simulation in Rhino's graphical algorithm editor, Grasshopper. The tool adopts a previous stigmergic multi-agent algorithm for simulation and expands its boundary into three dimensions. In addition, this tool adds some custom rules, thus giving the designer more creative control over the produced results. Two research projects have applied this tool in the design process. The first project mainly takes advantage of the tool's path-planning ability, while the second one utilizes its aesthetic values, demonstrating the potential of the tool for further applications.
keywords	stigmergy; multi-agent systems; form finding; computation; biomimicry
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia17_456
id	acadia17_456
authors	Page, Mitchell
year	2017
title	A Robotic Fabrication Methodology for Dovetail and Finger Jointing: An Accessible & Bespoke Digital Fabrication Process for Robotically-Milled Dovetail & Finger Joints
doi	https://doi.org/10.52842/conf.acadia.2017.456
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 456- 463
summary	Since the advent of industrialized processes in modern construction industries, the development of and relationship between computer-aided tools of design and computer-controlled tools of fabrication has steadily yielded new and innovative construction methodologies. Whilst industry has adopted many of these innovations for use by highly efficient machines and flexible processes, their operation is often highly dependent on industrial scales of production, and thus often inaccessible for small-scale, bespoke and affordable application. The prototype integrated joint milling methodology, case study and open-source software plugin ‘Dove’ presented in this paper, explores the efficacy of algorithmic processes in dynamically generating complex tooling paths and machine code for fabrication of bespoke dovetail and finger joints on a 6-axis industrial robot. The versatility, speed and precision of 6-axis robotic milling, allows us to liberate the efficiency, integrity and aesthetic of the dovetail and finger joint types from traditional application, and apply them to new architectures involving mass-customisation, complex form, and diverse materialities. In the development of full-immersion milling toolpaths and back-face filleting techniques that drastically reduce cutting times, tool path complexity and material waste, this study seeks to build upon past and current research by proposing a comparatively simple, efficient and more intuitive approach to robotically-fabricated integrated jointing for application at a variety of scales.
keywords	material and construction; fabrication; construction/robotics; digital craft; manual craft
series	ACADIA
email
last changed	2022/06/07 07:58

_id	caadria2017_136
id	caadria2017_136
authors	Zhang, Cheng and Ong, Lijing
year	2017
title	Optimization of Window-Wall-Ratio using BIM-based Energy Simulation
doi	https://doi.org/10.52842/conf.caadria.2017.397
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 397-405
summary	In this research, sensitivity analysis is applied to investigate the impact from U-values of walls, U-value of windows, and the window-to-wall ratio. The purpose is to find the co-relationship between those parameters with the building energy performance, including embedded energy in materials and operational energy during the lifecycle. Building Information Modeling (BIM) is used as a platform to obtain the material quantities and carry on energy simulation. A case study is applied for a manufactory plant in Suzhou, China. By applying both local sensitivity analysis and global sensitivity analysis, it is found that thermal properties of walls have insignificant impact on Operational Energy to Embodied Energy (OE-EE) relationship of Window-Wall-Ratio (WWR) whereas changing thermal properties of windows affects the OE-EE relationship behaviour of WWR. Lowering U-value of windows brings positive impact to the OE-EE relationship of WWR, and vice versa. Therefore, suggestions are made as reducing/increasing U-value of windows while increasing/decreasing the WWR of building.
keywords	Building Informaion Modeling; Window-Wall-Ratio; energy simulation
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cf2017_084
id	cf2017_084
authors	Chen, Kian Wee; Janssen, Patrick; Norford, Leslie
year	2017
title	Automatic Generation of Semantic 3D City Models from Conceptual Massing Models
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 84-100.
summary	We present a workflow to automatically generate semantic 3D city models from conceptual massing models. In the workflow, the massing design is exported as a Collada file. The auto-conversion method, implemented as a Python library, identifies city objects by analysing the relationships between the geometries in the Collada file. For example, if the analysis shows that a closed poly surface satisfies certain geometrical relationships, it is automatically converted to a building. The advantage of this workflow is that no extra modelling effort is required, provided the designers are consistent in the geometrical relationships while modelling their massing design. We will demonstrate the feasibility of the workflow using three examples of increasing complexity. With the success of the demonstrations, we envision the utoconversion of massing models into semantic models will facilitate the sharing of city models between domain-specific experts and enhance communications in the urban design process.
keywords	Interoperability, GIS, City Information Modelling, Conceptual Urban Design, Collaborative Urban Design Process
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
doi	https://doi.org/10.52842/conf.acadia.2017.028
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

_id	acadia17_62
id	acadia17_62
authors	Al-Assaf, Nancy S.; Clayton, Mark J.
year	2017
title	Representing the Aesthetics of Richard Meier’s Houses Using Building Information Modeling
doi	https://doi.org/10.52842/conf.acadia.2017.062
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 62-71
summary	Beyond its widespread use for representing technical aspects and matters of building and construction science, Building information modeling (BIM) can be used to represent architectural relationships and rules drawn from aesthetic theory. This research suggests that BIM provides not only vocabulary but also syntactical tools that can be used to capture an architectural language. In a case study using Richard Meier’s language for single-family detached houses, a BIM template has been devised to represent the aesthetic concepts and relations therein. The template employs parameterized conceptual mass objects, syntactical rules, and a library of architectonic elements, such as walls, roofs, columns, windows, doors, and railings. It constrains any design produced using the template to a grammatically consistent expression or style. The template has been used as the starting point for modeling the Smith House, the Douglas House, and others created by the authors, demonstrating that the aesthetic template is general to many variations. Designing with the template to produce a unique but conforming design further illustrates the generality and expressiveness of the language. Having made the formal language explicit, in terms of syntactical rules and vocabulary, it becomes easier to vary the formal grammar and concrete vocabulary to produce variant languages and styles. Accordingly, this approach is not limited to a specific style, such as Richard Meier's. Future research can be conducted to demonstrate how designing with BIM can support stylistic change. Adoption of this approach in practice could improve the consistency of architectural designs and their coherence to defined styles, potentially increasing the general level of aesthetic expression in our built environment.
keywords	design methods; information processing; BIM; education
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2017_115
id	cf2017_115
authors	Alambeigi, Pantea; Chen, Canhui; Burry, Jane; Cheng, Eva
year	2017
title	Shape the Design with Sound Performance Prediction: A Case Study for Exploring the Impact of Early Sound Performance Prediction on Architectural Design
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 115-127.
summary	Acoustics is typically considered only late in developed design or even post occupancy, if at all, for specification of finishes and furnishing, and typically with a remedial mindset. In this paper, the role of sound performance as a design driver in increasing the speech privacy of a semi-enclosed meeting space in an open plan interior is studied. Sound performance prediction is applied as an imperative input to inform the meeting space design. The design is the second iteration in an evolving series of meeting spaces, and therefore has benefited from both subjective experiments and objective measurements performed with the first meeting space prototype. This study promotes a design method that offers a strong relationship between the digital simulation of sound performance and design development. By improving the speech privacy of a meeting space by means of purely form, geometry and design decisions, the significance of architecture in tuning the sound performance of a space is investigated.
keywords	Sound Performance Prediction, Sound Simulation, Meeting Space, Architectural Design
series	CAAD Futures
email
last changed	2017/12/01 14:37

For more results click below: