Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 557

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_044
id	ecaade2017_044
authors	Fernando, Shayani, Reinhardt, Dagmar and Weir, Simon
year	2017
title	Simulating Self Supporting Structures - A Comparison study of Interlocking Wave Jointed Geometry using Finite Element and Physical Modelling Methods
doi	https://doi.org/10.52842/conf.ecaade.2017.2.177
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 177-184
summary	Self-supporting modular block systems of stone or masonry architecture are amongst ancient building techniques that survived unchanged for centuries. The control over geometry and structural performance of arches, domes and vaults continues to be exemplary and structural integrity is analysed through analogue and virtual simulation methods. With the advancement of computational tools and software development, finite and discrete element modeling have become efficient practices for analysing aspects for economy, tolerances and safety of stone masonry structures. This paper compares methods of structural simulation and analysis of an arch based on an interlocking wave joint assembly. As an extension of standard planar brick or stone modules, two specific geometry variations of catenary and sinusoidal curvature are investigated and simulated in a comparison of physical compression tests and finite element analysis methods. This is in order to test the stress performance and resilience provided by three-dimensional joints respectively through their capacity to resist vertical compression, as well as torsion and shear forces. The research reports on the threshold for maximum sinusoidal curvature evidenced by structural failure in physical modelling methods and finite element analysis.
keywords	Mortar-less; Interlocking; Structures; Finite Element Modelling; Models
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2017_212
id	ecaade2017_212
authors	Kwiecinski, Krystian, Markusiewicz, Jacek and Pasternak, Agata
year	2017
title	Participatory Design Supported with Design System and Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2017.2.745
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 745-754
summary	In this paper we present our research which is focused on developing and testing a method supporting participatory design process with a use of a design system and Augmented Reality interactive interface. We propose a concept of participatory design where participants can directly interact with architectural knowledge encapsulated in the design system. The proposed concept of participatory design supported with a design system was tested during a workshop conducted in Kaunas, Lithuania. The dedicated design system was created in order to minimize physical interaction between the architect and the users while allowing for customization of design solutions by participants. The design system and the participatory design process were linked with the use of a digital communication interface. The paper is concluded with a critical view on the process. The conclusions are based substantially on the results of a survey prepared by the authors and conducted among workshop's participant.
keywords	Augmented Reality; participatory design; design interface; parametric design
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2017_017
id	ecaade2017_017
authors	Markkanen, Piia, Pihlajaniemi, Henrika and Herneoja, Aulikki
year	2017
title	Adaptive Lighting for Knowledge Work Environments - A Pilot Design
doi	https://doi.org/10.52842/conf.ecaade.2017.1.343
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 343-352
summary	Adaptive lighting technologies and control of lighting by users provide new possibilities for lighting design in the context of knowledge work environments. In our research project, we study innovation supporting knowledge work environments and their features, such as lighting. In this paper, we present and reflect the design of a pilot intervention, where the use of adaptive lighting was tested. We discuss how different forms of data and knowledge can be applied as a rationale for adaptive lighting behaviour which as an ambient feature in office environment supports knowledge workers' well-being and supports different working situations. In addition, we present the data-based evaluation methods with which we could gain feedback from users' experiences and their way of using the lighting and the pilot office environment. The potential of this kind of real-world data for future design processes is discussed.
keywords	knowledge work environment; adaptive lighting; dynamic lighting; user-controlled lighting; lighting design
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2017_015
id	caadria2017_015
authors	Pelosi, Antony
year	2017
title	Where am I? - Spatial Cognition Inside Building Information Models
doi	https://doi.org/10.52842/conf.caadria.2017.643
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 643-652
summary	How do we know what we are looking at while viewing inside Building Information Modelling (BIM) models? Current architectural software typically provides disconnected methods of aiding spatial cognition. There is a strong history of navigation tools developed for controlling our exploration and movement in BIM models, a study by Ruby Darken and John Sibert (1993) found these tools had a strong influence on people's behaviour and understanding of digital space. People perceive and navigate space differently depending on their individual experience with a BIM model, designers and architects build up a detailed cognitive map during the design of a project, while other people have a less detailed comprehension of a project, having only been exposed to select views. This paper will outline key strategies to improve how people comprehend digital space, supporting people in understanding distance and size while inside BIM models. Three design research projects will be presented. The result of the projects define three strategies; Architectural wayshowing, interior-aware transitions, and distance confirmation. Architectural wayshowing needs to be implemented during the design phase, while the remaining two need to be introduced into BIM editing and viewing software.
keywords	Whiteout; wayshowing; spatial cognition; navigation; BIM
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia17_62
id	acadia17_62
authors	Al-Assaf, Nancy S.; Clayton, Mark J.
year	2017
title	Representing the Aesthetics of Richard Meier’s Houses Using Building Information Modeling
doi	https://doi.org/10.52842/conf.acadia.2017.062
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 62-71
summary	Beyond its widespread use for representing technical aspects and matters of building and construction science, Building information modeling (BIM) can be used to represent architectural relationships and rules drawn from aesthetic theory. This research suggests that BIM provides not only vocabulary but also syntactical tools that can be used to capture an architectural language. In a case study using Richard Meier’s language for single-family detached houses, a BIM template has been devised to represent the aesthetic concepts and relations therein. The template employs parameterized conceptual mass objects, syntactical rules, and a library of architectonic elements, such as walls, roofs, columns, windows, doors, and railings. It constrains any design produced using the template to a grammatically consistent expression or style. The template has been used as the starting point for modeling the Smith House, the Douglas House, and others created by the authors, demonstrating that the aesthetic template is general to many variations. Designing with the template to produce a unique but conforming design further illustrates the generality and expressiveness of the language. Having made the formal language explicit, in terms of syntactical rules and vocabulary, it becomes easier to vary the formal grammar and concrete vocabulary to produce variant languages and styles. Accordingly, this approach is not limited to a specific style, such as Richard Meier's. Future research can be conducted to demonstrate how designing with BIM can support stylistic change. Adoption of this approach in practice could improve the consistency of architectural designs and their coherence to defined styles, potentially increasing the general level of aesthetic expression in our built environment.
keywords	design methods; information processing; BIM; education
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_199
id	ecaade2017_199
authors	Al-Douri, Ph.D., Firas
year	2017
title	Computational and Modeling Tools - How effectively are Urban Designers and Planners using them Across the Design Development Process?
doi	https://doi.org/10.52842/conf.ecaade.2017.1.409
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 409-418
summary	Literature suggests that despite the increasing range and variety of computational tools and technologies, they have not really been employed for designing as extensively as it might be. This is due in part to the numerous challenges and impediments limiting their effective usage such as the methodological, procedural, and substantive factors and limitations, and skepticism about their impact of usage on the design process and outcome. The gap in our understanding of how advanced computational tools could support the design activities and design decision-making has expanded considerably to become a new area of inquiry with considerable room for the expansion of knowledge. This research is a single-case study that has been pursued in two phases: literature review and survey followed by analysis and discussion of the empirical results. The empirical observations were compared to the theoretical propositions and with results of similar research to highlight the areas and the extent to what the IT tools' usage have influenced the outcome of the design process. The comparison has helped highlight, explain, and justify the mechanism and improvements in the design outcome. Please write your abstract here by clicking this paragraph.
keywords	Computational urban design; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_92
id	acadia17_92
authors	Anzalone, Phillip; Bayard, Stephanie; Steenblik, Ralph S.
year	2017
title	Rapidly Deployed and Assembled Tensegrity System: An Augmented Design Approach
doi	https://doi.org/10.52842/conf.acadia.2017.092
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 92-101
summary	The Rapidly Deployable and Assembled Tensegrity (RDAT) project enables the efficient automated design and deployment of differential-geometry tensegrity structures through computation-driven design-to-installation workflow. RDAT employs the integration of parametric and solid-modeling methods with production by streamlining computer numerically controlled manufacturing through novel detailing and production techniques to develop an efficient manufacturing and assembly system. The RDAT project emerges from the Authors' research in academia and professional practice focusing on computationally produced full-scale performative building systems and their innovative uses in the building and construction industry.
keywords	design methods; information processing; AI; machine learning; form finding; VR; AR; mixed reality
series	ACADIA
email
last changed	2022/06/07 07:54

_id	sigradi2017_014
id	sigradi2017_014
authors	Bonilla Vallejo, Mario Andres; Denise Mônaco dos Santos, Douglas Lopes de Souza, Pena Martinez, Andressa Carmo
year	2017
title	La práctica de la colaboración en los procesos digitales de diseño: Investigación - Acción [The practice of collaboration in digital processes design: Investigation action]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.106-113
summary	This paper aims to present reflections on the practice of collaboration in the project JAM! Diálogos emergentes e processos digitais de projeto. For this, we analyzed the interaction and communication of a geographically distributed work team in Brazil, through a research - action methodology. Here be considered as main aspects the digital tools and technologies that support the development of remote architectural projects. Therefore, advances in the CSCW area taken into account for such analysis. This work linked to a master's research that be carry out at the Federal University of Viçosa
keywords	Process design; Collaboration; Groupware; Collective intelligence.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_172
id	ecaade2017_172
authors	Brand?o, Filipe, Paio, Alexandra and Whitelaw, Christopher
year	2017
title	Mapping Mass Customization
doi	https://doi.org/10.52842/conf.ecaade.2017.2.417
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 417-424
summary	Mass customization (MC) and personal fabrication (PF) are current relevant topics in architecture offices practice and schools design research. Architects are adopting information based design and production techniques as a response to architectural century challenges. However, is not clear how various authors used and transformed the concept in practice, research and industry after three decades since the MC term was introduced by Davis (1987). Therefore, is essential to map the most relevant works in the field in relation to production and design control. The paper presents some of the results of the ongoing study through an evolving map that aims to visualize relationships, layering complexity and revealing difference.
keywords	Mass Customization; Personal Fabrication; Housing; Map
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2017_018
id	caadria2017_018
authors	Fernando, Shayani, Reinhardt, Dagmar and Weir, Simon
year	2017
title	Waterjet and Wire-cutting Workflows in Stereotomic Practice - Material Cutting of Wave Jointed Blocks
doi	https://doi.org/10.52842/conf.caadria.2017.787
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 787-797
summary	In the context of stereotomic practice, advanced fabrication with waterjet and wire-cutting of interlocking wave geometry has opened up new possibilities for crafting stone modules with precision and efficiency. This paper discusses the utilization of machined cutting techniques, the processes and workflows of fabricating joint systems for arched and vaulted surface geometries. It presents a comparative study with multiple criteria; such as geometry, method, material, machine and workflow. Furthermore, this paper presents research into the comparison between abrasive waterjet cutting and wire cutting of modules in stone and foam.
keywords	Stereotomy; Wire Cutting; WaterJet; Wave Blocks; Workflow
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2017_282
id	ecaade2017_282
authors	Ham, Jeremy, Kieferle, Joachim B. and Woessner, Uwe
year	2017
title	Exploring the Three Dimensional Spatiality of Polyrhythmic Drum Improvisation
doi	https://doi.org/10.52842/conf.ecaade.2017.2.629
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 629-636
summary	This paper reports on creative practice design research founded on the translation of complex polyrhythmic digital drumming into the spatial domain. We outline four exercises in the use of drumming improvisation as a methodology for the spatialization of polyrhythmic drum improvisation; as static Spatial Drum Notation and representation as 3D models, artefacts and in Virtual Environments and live drumming performance inside a VR CAVE. These creative exercises bring forward concepts of affordance of musico-spatial representations, a theoretical 'musico-perspectival hinge' and the continuum of performance, notation and representation.
keywords	Music and Architecture; Drumming and Polyrhythm; Virtual Reality
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2017_024
id	sigradi2017_024
authors	Howe, Nathan; Ryan Gedney
year	2017
title	Data-driven Age \| Educating the Architects of Tomorrow [Data-driven Age \| Educating the Architects of Tomorrow]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.174-179
summary	This paper delves into the paradigm shift of architecture practice and teaching in a data-driven age. What tools are needed within the architectural environment? What type of expertise must professionals be exposed to? What type of research and analysis is necessary to provide conviction for a design? These are just a few questions introduced in this paper to create a methodology for discovering alternate ways of teaching and practicing architecture. In this exploration, an architectural firm and a graduate studio’s expertise were combined to create a framework for educating the architect of tomorrow in a data-driven age.
keywords	data-drive; parameters; technology; architecture; urban; academy; profession
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia17_414
id	acadia17_414
authors	Mohiuddin, Arefin; Woodbury, Robert; Ashtari, Narges; Cichy, Mark; Mueller, Völker
year	2017
title	A Design Gallery System: Prototype and Evaluation
doi	https://doi.org/10.52842/conf.acadia.2017.414
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 414- 425
summary	Designers work by creating alternatives. Current design media restrict this practice through their near-universal adherence to a single-state document model. We describe the implementation of an online gallery system built as part of a research program to understand new media types for working with design alternatives in parametric modeling. The online gallery supports multiple commercially available parametric modelers. A user study shows a significant difference between two modes of gallery operation and a qualitative study describes user patterns in using the online gallery system.
keywords	design methods; information processing; HCI; generative system; design exploration
series	ACADIA
email
last changed	2022/06/07 07:58

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2017_079
id	ecaade2017_079
authors	Qabshoqa, Mohammad, Kocaturk, Tuba and Kiviniemi, Arto
year	2017
title	A value-driven perspective to understand Data-driven futures in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2017.2.407
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 407-416
summary	This paper reports on an investigation of the potentials of data utilisation in Architecture from a value generation and business creation points of view, based on an ongoing PhD research by the first author. It is of crucial importance to, first, identify what data actually signifies for Architecture, and secondly to explore how the value obtained through data-driven approaches in other industries could potentially be transferred and applied in our professional context. These objectives have been achieved through a qualitative comparative analysis of various cases. Additionally, the paper discusses the multiplicity of factors which contribute to different interpretations and utilisation of data with reference to various value systems embedded into our profession (e.g. design as ideology, design as profession, design as service). A comparative analysis of the existing data utilisation methods in connection with various value systems provide crucial insights in order to answer the following questions: How can data assess values in architectural design/practice? How can data utilisation give way to the emergence of new values for the profession?
keywords	Big Data in Architecture; Data-Driven Architecture Design; Data in Architecture Design; Computational Data Design; Digital Value in Architecture
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2017_000
id	sigradi2017_000
authors	Roco Ibaceta, Miguel
year	2017
title	Resilience Design
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017
summary	The chosen theme, Resilience Design, evidences the researchers’ concern about issues related to our reality of climate change and natural disasters, associated with the states of vulnerability and risk, having wide effects on society and the way we inhabit territories. These matters are fundamental and highly relevant for the disciplines and in the fields of design and architecture, as they are also important for collaborative work with areas emerging from the arts and human sciences. Thinking about Resilience Design is to set ourselves on new scenarios of reflection and action which, supported by transdisciplinary thinking and collaborative design, allow us to develop a new approach towards our territories and their demands, one that is more contextualized and adjusted to their current and future requirements, a starting point to establish the key elements to drive change in our cities and society. In this sense, technology and digital development, parametric design, the use of Information and Communication Technologies (ICT) and Geographic Information Systems (GIS), in addition to work done with Building Information Modelling (BIM), among many others, have been delivering an enormous amount of tools and possibilities of interaction with living in society, leading to a substantive change in the way of understanding and relating to the built environment and the territories where buildings are sit. This demands a strong commitment to Social Responsibility from our disciplines, besides the necessary landing of cutting-edge technological and digital research and development onto our diverse realities, in order for them to be put at the service of communities in vulnerable environments or with a marked condition of risk, which are subject to constant processes of resilience. Working on Resilience Design allows to support research and productive processes, plus the appearance of new technologies in interdisciplinary contexts, which greatest value is to impact the processes of teaching and professional practice in the different areas related to human habitation. The new professionals will have to take action and immerse themselves into these new scenarios of change and constant adjustment.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2017_118
id	ecaade2017_118
authors	Shehu, Mateos and Yunitsyna, Anna
year	2017
title	Generative computational tools for the design of Urban Morphology
doi	https://doi.org/10.52842/conf.ecaade.2017.1.477
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 477-482
summary	Today more than 50% of the population is located in cities. This is an essential need, considering the facilities that urban life offers in contrast to the rural one. But, despite the benefits this migration brings to the individuals, it is also associated with some degree of unpredicted behavior which harms the community. In the recent years Albania, like most developing countries, has been facing problems with both informality and the inability to come up with concrete design solutions to adapt quick changes. From this perspective, this paper illustrates a research done to encompass new tools in the urban design practice of Albania for the overcoming of the current design difficulties.It describes a new approach to assess the problematics in the city of Tirana, and implement an algorithmic procedure which creates urban design proposals similar but not limited to the existing ones. Together with other evaluation tools, these new proposals can be tested in terms of energy efficiency, solar access and ventilation performance with the ultimate goal of creating a unified work model which not only will speed up the process but also improve its overall design efficiency.
keywords	Parametric Urbanism; Urban Morphology; Sustainability
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: