Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 467

Reformat results as: short short into frame detailed detailed into frame

_id	lasg_whitepapers_2019_157
id	lasg_whitepapers_2019_157
authors	Kretzer, Manuel
year	2019
title	Tomorrowland
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.157 - 172
summary	This essay is a transcript of a series of lectures I presented entitled ‘Tomorrowland’ and is partially based on material which has been previously published in ‘Information Materials – Smart Materials for Adaptive Architecture, Manuel Kretzer. Bern: Springer International Publishing, 2017’ as well as an unpublished paper co-written with Adil Bokhari on our common design studio ‘Synthetic Ecologies.’
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	ijac201715101
id	ijac201715101
authors	Bieg, Kory and Clay Odom
year	2017
title	Lumifoil and Tschumi: Virtual projections and architectural interventions
source	International Journal of Architectural Computing vol. 15 - no. 1, 6-17
summary	This article introduces the theoretical and technical framework for the design of a temporary rooftop canopy on the red generator—one of the buildings designed by Bernard Tschumi for the Florida International University School of Architecture. The project, Lumifoil, was designed using both top-down and bottom-up computational techniques, including surface modeling via projected geometries and scripted cellular subdivisions and assemblies. Lumifoil attempts to synthesize these two often-conflicting design approaches into a generative design process which leverages context, form, surface, and structure as affective and effective actors. Lumifoil is the result of a design methodology which is both active and reactive to existing conditions of the site and new opportunities afforded by the program. It is contextual in its top-down relationship to Tschumi’s existing building and theory, generative in how details emerge bottom-up through scripts which lack any reference to site, and emergent in the resulting synthetic processes and effects which are produced. Through this methodological development, the project both tracks and responds to popular architectural theory and design from the mid-1990s to today. The theoretical underpinnings of the project build upon the idea that the actual (the real-life physical manifestation of matter) and the virtual (the potential for an object to be) are two constantly shifting paradigms in which design processes can intervene to help develop an architectural solution from a range of possibilities. The technical aspect of the project includes the collaborative workflow between the architecture offices of OTA+ and studio MODO with Arup Engineers to resolve structural issues using parametric modeling tools and structural analysis software. The final project is entirely parametric and fabrication is completely automated.
keywords	Tschumi, Parametric, Installation, Generative, Projection
series	other
type	normal paper
email
last changed	2019/08/02 08:16

_id	ecaade2017_210
id	ecaade2017_210
authors	Jimenez Garcia, Manuel, Soler, Vicente and Retsin, Gilles
year	2017
title	Robotic Spatial Printing
doi	https://doi.org/10.52842/conf.ecaade.2017.2.143
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 143-150
summary	There has been significant research into large-scale 3D printing processes with industrial robots. These were initially used to extrude in a layered manner. In recent years, research has aimed to make use of six degrees of freedom instead of three. These so called "spatial extrusion" methods are based on a toolhead, mounted on a robot arm, that extrudes a material along a non horizontal spatial vector. This method is more time efficient but up to now has suffered from a number of limiting geometrical and structural constraints. This limited the formal possibilities to highly repetitive truss-like patterns. This paper presents a generalised approach to spatial extrusion based on the notion of discreteness. It explores how discrete computational design methods offer increased control over the organisation of toolpaths, without compromising design intent while maintaining structural integrity. The research argues that, compared to continuous methods, discrete methods are easier to prototype, compute and manufacture. A discrete approach to spatial printing uses a single toolpath fragment as basic unit for computation. This paper will describe a method based on a voxel space. The voxel contains geometrical information, toolpath fragments, that is subsequently assembled into a continuous, kilometers long path. The path can be designed in response to different criteria, such as structural performance, material behaviour or aesthetics. This approach is similar to the design of meta-materials - synthetic composite materials with a programmed performance that is not found in natural materials. Formal differentiation and structural performance is achieved, not through continuous variation, but through the recombination of discrete toolpath fragments. Combining voxel-based modelling with notions of meta-materials and discrete design opens this domain to large-scale 3D printing. Please write your abstract here by clicking this paragraph.
keywords	discrete; architecture; robotic fabrication; large scale printing; software; plastic extrusion
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2017_163
id	caadria2017_163
authors	Kalantari, Saleh and Saleh Tabari, Mohammad Hassan
year	2017
title	GrowMorph: Bacteria Growth Algorithm and Design
doi	https://doi.org/10.52842/conf.caadria.2017.479
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 479-487
summary	GrowMorph is an ongoing research project that addresses the logic of bacterial cellular growth and its potential uses in architecture and design. While natural forms have always been an inspiration for human creativity, contemporary technology and scientific knowledge can allow us to advance the principle of biomimesis in striking new directions. By examining various patterns of bacterial growth, including their parametric logic, their use of responsive membranes and scaffolding structures, and their environmental fitness, this research creates new algorithmic design and construction models that can be applied through digital fabrication. Based on data from confocal microscopy, simulations were created using programming language Processing to model the environmental responses and morphology of the bacteria's growth. To demonstrate the utility of the results, the simulations created in this research were used to design an organically shaped pavilion and to suggest a new digital knitting process for material construction. The results from the study can inspire designers to make use of bacterial growth logic in their work, and provide them with practical tools for this purpose. Potential applications include novel designs for responsive surfaces, new fabrication processes, and unique spatial structures in future architectural work.
keywords	Synthetic Biology; Architecture; Bio-fabrication; Bio-constructs; Design Computation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2017_080
id	sigradi2017_080
authors	Meneses-Carlos, Fernando; Daniela Frogheri
year	2017
title	Espacios habitables sensibles: Microorganismos como herramientas de diseño [Sensitive habitable spaces: Microorganisms as design tools.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.550-559
summary	This article aims to validate the possibility of including technology from micobiologies and synthetic biology in architecture and design. For this analysis, five projects are presented: a project of our own, developed by the research group, another with a direct application in architecture and three additional projects form the world of microbiology, which review topics such as energy generation, materials production and improving air quality thought microorganisms. This analysis, aims to legitimate, and expose the advantages and limits of a potential union between the molecular world and the design of the habitable space.
keywords	Architecture, Microorganisms, Sensitive, Emergency; Monads
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2017_130
id	ecaade2017_130
authors	Nagakura, Takehiko and Sung, Woongki
year	2017
title	Spatial Typology for BIM - Preassembling for Synthetic Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2017.1.129
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 129-136
summary	Contemporary Building Information Modeling (BIM) software provides basic component types such as bathtubs, desks, windows and walls that are available in many varieties of kinds and ready for drag-and-drop into a design project. However, the software is unlikely to provide higher level constructs such as bathrooms or offices as types, and these spatial concepts are largely unframed in the ontology of the building system. This paper looks at these spatial concepts left unframed in BIM as important fabric in the design process, examines how they are represented typologically in conventional design resources such as Neufert Architects' Data, and discusses strategies for embedding them in BIM. Together with abundant published cases of architectural designs, the examples of spatial forms in these resources play a role of Big Data. The paper then demonstrates a prototype of parametric office building typology embedded in BIM and illustrates how such a tool helps an architect to study volumetric layout on a given site. The approach tested leads to an idea of BIM imbued with a massive taxonomic library of preassembled spatial types and takes us a step closer to a symbiotic or synthetic architectural design process.
keywords	Building Information Modeling; Architectural Typology; Design Representation; Big Data; Synthetic Design
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2017_302
id	ecaade2017_302
authors	Saleh Tabari, Mohammad Hassan, Kalantari, Saleh and Ahmadi, Nooshin
year	2017
title	Biofilm-inspired Formation of Artificial Adaptive Structures
doi	https://doi.org/10.52842/conf.ecaade.2017.2.303
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 303-312
summary	Todays design researchers are beginning to develop a process-based approach to biomimicry. Instead of merely looking at static natural structures for inspiration, we are learning to draw from the underlying organic processes that lead to the creation of those structures. This paradigm shift points us in the direction of adaptive fabrication systems that can grow through processes of self-assembly and can reconfigure themselves to meet the contours of local environments. In this study we examined the structural growth patterns of bacterial biofilms as a basis for a new kind of artificial, self-assembling module. This demonstration of bio-inspired design shows how contemporary technology allows us to harness the lessons of evolution in new and innovative ways. By exploring the dynamic assembly of complex structural formations in nature, we are able to derive new resource-efficient approaches to adaptable designs that are suited to changing environments. Ultimately we aspire to produce fully synthetic analogues that follow similar patterns of self-assembly to those found in bacterial biofilm colonies. Designers have only just begun to explore the tremendous wealth of natural form-creation processes that can now be replicated with computer-aided design and fabrication; this project shows just one example of what the future might hold.
keywords	Biofilm; Adaptive Structure; Formation; Quorum Sensing; Parametric Condition
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia19_392
id	acadia19_392
authors	Steinfeld, Kyle
year	2019
title	GAN Loci
doi	https://doi.org/10.52842/conf.acadia.2019.392
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 392-403
summary	This project applies techniques in machine learning, specifically generative adversarial networks (or GANs), to produce synthetic images intended to capture the predominant visual properties of urban places. We propose that imaging cities in this manner represents the first computational approach to documenting the Genius Loci of a city (Norberg-Schulz, 1980), which is understood to include those forms, textures, colors, and qualities of light that exemplify a particular urban location and that set it apart from similar places. Presented here are methods for the collection of urban image data, for the necessary processing and formatting of this data, and for the training of two known computational statistical models (StyleGAN (Karras et al., 2018) and Pix2Pix (Isola et al., 2016)) that identify visual patterns distinct to a given site and that reproduce these patterns to generate new images. These methods have been applied to image nine distinct urban contexts across six cities in the US and Europe, the results of which are presented here. While the product of this work is not a tool for the design of cities or building forms, but rather a method for the synthetic imaging of existing places, we nevertheless seek to situate the work in terms of computer-assisted design (CAD). In this regard, the project is demonstrative of a new approach to CAD tools. In contrast with existing tools that seek to capture the explicit intention of their user (Aish, Glynn, Sheil 2017), in applying computational statistical methods to the production of images that speak to the implicit qualities that constitute a place, this project demonstrates the unique advantages offered by such methods in capturing and expressing the tacit.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	caadria2018_209
id	caadria2018_209
authors	Yao, Jiawei, Lin, Yuqiong, Zhao, Yao, Yan, Chao, Li, Changlin and Yuan, Philip F.
year	2018
title	Augmented Reality Technology based Wind Environment Visualization
doi	https://doi.org/10.52842/conf.caadria.2018.1.369
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 369-377
summary	Considering the outdoor environment at the initial stage of design process plays a significant role on future building performance. Augmented Reality (AR) technology applied in this research can integrate real world building morphology information and virtual world ventilation information seamlessly that rapidly and directly provides designers information for observation and evaluation. During the case study of "2017 Shanghai DigitalFUTURE" summer workshop, a research on augmented reality technology based wind environment visualization was carried on. The achievement with an application software not only showed the geometric information of the real world objects (such as buildings), but also the virtual wind environment has displayed. Thus, these two kinds of information can complement and superimpose each other. This AR technology based software brings multiple synthetic together, which can (1) visualize the air flow around buildings that provides designers rapid and direct information for evaluation; (2) deal with wind-environment-related data quantitatively and present in an intuitive, easy-to-interpret graphical way; and (3) be further developed as a visualization system based on built-in environments in the future, which contributes to rapid evaluation of a series of programs at the beginning of the building design.
keywords	Environment visualization; Augmented reality technology; Fast response; Outdoor ventilation
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia17_374
id	acadia17_374
authors	Manninger, Sandra; del Campo, Matias
year	2017
title	Plato's Columns: Platonic Geometries vs. Vague Gestures in Robotic Construction
doi	https://doi.org/10.52842/conf.acadia.2017.374
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 374- 381
summary	This paper examines the inherent possibilities for architectural production in automated deposition modeling techniques, primarily explored through the use of industrial robots in combination with plastic deposition heads. These robots, in combination with various polymers, toolpaths and colorations, served as a design ecology for the exploration of emergent behaviors in robotic construction. The relationship between geometry (Euclidian, topological, fractal), mechanical properties of material (plasticity, elasticity, viscosity, resilience), optical properties (color, absorbance, transmittance, scattering), and the gestural qualities of robotic toolpaths constitute the palette adopted for the presented project. The project combines the rigor of a platonic body (Figure 2) with the emergent properties of vague gestures. The introduction of moments of uncertainty in the process produces glitches that are embraced as an opportunity to find novel aesthetic conditions. The profound entanglement with the post-digital realm is discussed as the discursive plane of thinking applied to the project.
keywords	design methods; information processing fabrication; construction/robotics; form finding; computational / artistic cultures
series	ACADIA
email
last changed	2022/06/07 07:59

_id	sigradi2020_643
id	sigradi2020_643
authors	Naylor, John Osmond; Leconte, Nancy; Michel Vendryes, Franck Reginald
year	2020
title	Education to practice to ecology: A review and preliminary evaluation of a new architectural design curriculum using computational design tools and bamboo in Haiti
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 643-651
summary	There is an absence of lightweight, sustainable construction materials in contemporary Haitian construction, a fact highlighted in the disproportionate loss of life in the 2010 Port-au-Prince earthquake. Between 2014 and 2017 the authors delivered a series of architectural design workshops in Haiti to raise awareness and develop design skills for bamboo using computational design tools. This paper provides a review of these workshops and a preliminary evaluation from surveys conducted with the course participants. Results showed architectural education had changed perceptions of bamboo and showed potential positive ecological impact due to subsequent reforestation activities instigated by participants. Weaknesses were in the lack of subsequent use of parametric modelling software. Bamboo material knowledge and a new architectural design methodology have been most relevant to their professional or academic work.
keywords	Haiti, Full-culm bamboo, Architectural education, Sustainable development, Parametric design
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	ecaade2017_138
id	ecaade2017_138
authors	Nerla, Maria Giuditta, Erioli, Alessio and Garai, Massimo
year	2017
title	Modulated corrugations by differential growth - Integrated FRP tectonics towards a new approach to sustainability, fusing architectural and energy design for a new students’ space
doi	https://doi.org/10.52842/conf.ecaade.2017.2.593
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 593-602
summary	This Master Thesis research investigates the concept of 'integrated tectonics' as a new way of thinking sustainability in architecture, intended as an ecology of different, integrated factors which take part in a seamless design-to-fabrication process. In particular, this new paradigm is applied to the design of a pavilion made of a fiber-reinforced (FRP) sandwich shell integrating multiple systems and performances. A differential growth algorithm mimicking cellular tissue development modulates performance across the surface through ornamental features in the form of corrugated patterns. Iterative feedback simulations allow the exploration of the mutual relations connecting morphogenesis and performance distribution patterns at the architectural scale. Problems connected to simulation inaccuracies and difficult software integration are discussed. A 1:2 scale prototype of a shell portion was fabricated to test material properties and production feasibility.
keywords	Fiber-reinforced polymers (FRP); integrated tectonics; differential growth; composite materials; ecology; sustainability
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2017_099
id	ecaade2017_099
authors	Bialkowski, Sebastian
year	2017
title	tOpos - GPGPU Accelerated Structural Optimisation Utility for Architects
doi	https://doi.org/10.52842/conf.ecaade.2017.1.679
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 679-688
summary	The paper focuses on possibilities of already known engineering procedures such as Finite Element Method or Topology Optimisation for effective implementation in architectural design process. The existing attempts of complex engineering algorithms implementation, as a form finding approach will be discussed. By intersecting architectural form evaluation with engineering analysis complemented by optimisation algorithms, the new quality of contemporary architecture design process may appears.
keywords	topology optimisation; design support tools; complex geometries; General Programming GPU
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia17_146
id	acadia17_146
authors	Black, Conor; Forwood, Ed
year	2017
title	Game Engine Computation for Serious Engineering: Visualisation and Analysis of Building Facade Movements as a Consequence of Loads on the Primary Structure
doi	https://doi.org/10.52842/conf.acadia.2017.146
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 146-153
summary	This paper demonstrates the innovative use of game engines as a tool in the analysis and communication of complex structural engineering. It specifically looks at the relationship between a building’s primary structure and its façade. The analysis and visualisations, scripted using the Game Engine Unity3D, focuses on visualising the implications of movements from the primary structure [under various load cases] on the façade. This paper describes the novel process by which Unity3D is utilised to create an applet which imports displacements from structural software and post-processes the data to visualise the complex effect on façade panels according to its support conditions. It demonstrates that visualising facade movements in real-time, as opposed to current, static report-based descriptions, provide access for the comprehension of more complex building systems. This therefore has the possibility to reduce safety factors applied to facade movement joints.
keywords	design methods; information processing; game engines; fabrication; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2017_122
id	caadria2017_122
authors	Chen, Zi-Ru and Liang, Kai-Hsiang
year	2017
title	Application of Digital Fabrication Techniques to Reconstruct Ancient Machinery - A Case-study of Su Song's Water-powered Astronomical Clock Tower
doi	https://doi.org/10.52842/conf.caadria.2017.777
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 777-786
summary	The restoration of ancient machinery involves a number of aspects, including manufacturing procedure, materials, and scales. Portions that cannot be confirmed should be regarded as variable parameters of the reconstructed design, and therefore, there is no single result. The goal of reconstruction is to establish a prototype of ancient machinery with its mechanical engineering techniques and crafts. The problem of this study is how digital fabrication tools used in architectural design can be applied to the reconstruction of ancient machinery with the water-powered armillary and celestial tower as an example. The objective was to synthesize results that comply with historical records in a systematic, modularized, and parameterized manner and consider the feasibility of using modern digital fabrication and materials. With the procedure, we can reduce the difficulty of ancient machinery reconstruction and provide a reference for the reconstruction designs of ancient mechanical technology and crafts, and mass production made of different materials and scales in the future.
keywords	Digital fabrication; Ancient mechanisms recovery; Innovative design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia17_190
id	acadia17_190
authors	Coleman, James; Cole, Shannon
year	2017
title	By Any Means Necessary: Digitally Fabricating Architecture at Scale
doi	https://doi.org/10.52842/conf.acadia.2017.190
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 190-201
summary	Architectural manufacturing is a balancing act between production facility and a custom fabrication shop. Each project Zahner takes on is different from the last, and not likely to repeat. This means that workflows are designed and deployed for each project individually. We present Flash Manufacturing, a fabrication methodology we employ in the production of architectural elements for cutting-edge and computationally sophisticated buildings. By remixing manufacturing techniques and production spaces we are able to meet the novel challenges posed by fabricating and assembling hundreds of thousands of unique parts. We discuss methods for producing vastly different project types and highlight two building case studies: the Cornell Tech Bloomberg Center and the Petersen Automotive Museum. With this work, we demonstrate how design creativity is no longer at odds with reliable and cost-effective building practices. Zahner has produced hundreds of seminal buildings working with architects such as: Gehry Partners, Zaha Hadid, m0rphosis, Herzog & de Meuron, OMA, Steven Holl Architects, Studio Daniel Libeskind, Rafael Moneo, DS+R, Foster + Partners, Gensler, KPF, SANAA and many more. This paper disrupts conventional discourse surrounding manufacturing/construction methods by discussing the realities of mass customization—how glossy architectural products are forged through ad hoc inventive engineering and risk tolerance.
keywords	material and construction; fabrication; CAM; prototyping; construction; robotics
series	ACADIA
email
last changed	2022/06/07 07:56

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_412
id	ecaade2018_412
authors	Flanagan, Robert
year	2018
title	BIM’s Complexity and Ambiguity - BIM v. Paper Architecture
doi	https://doi.org/10.52842/conf.ecaade.2018.1.265
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 265-270
summary	Architects rely on the graphic language of words and art to bridge intention and design, just as it has always been. Yet, passing an idea or concept from mental imagery to design practice through 2D, 3D, and 4D design filters is especially challenging in BIM technology. Severe limitations hinder or even preclude BIMs use in certain complex design tasks, as identified in the Anti-Box, "The anti-box celebrates the death of the ninety-degree angle- in fact, every angle." (de Graaf 2017). Compatibility and constraints determine the most appropriate uses of BIM software, from designing mundane shopping mall developments to complex architectural engineering feats that stagger the imagination. BIM's main benefit is in the middle when it is creatively employed by professional architects in multi-discipline collaborations, well versed in symbolic representation, of designs conceived of multivalent design factors: narrative, form, function, multi-sensory access, materiality, space, and environment.
keywords	BIM; analog; HIC; Constructivist; Chernikov; photomatch
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: