Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 574

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_053
id	ecaade2017_053
authors	Gül, Leman Figen
year	2017
title	Studying Architectural Massing Strategies in Co-design - Mobile Augmented Reality Tool versus 3D Virtual World
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 703-710
doi	https://doi.org/10.52842/conf.ecaade.2017.2.703
summary	Researchers attempt to offer new design tools and technologies to support design process facilitating alternative visualization and representation techniques. This paper describes a comparison study that took place in the Department of Architecture, at the Istanbul Technical University between 2016-2017. We compare when architects designed mass volumes of buildings in an marker-based mobile Augmented Reality (AR) application with that of when they used a collaborative 3D Virtual World. The massing strategy in the AR environment was an additive approach that is to collaboratively design the small parts to make the whole. Alignment and arrangement of the parts were not the main concerns of the designers in AR, instead the functional development of the design proposal, bodily engagements with the design representation, framing and re-framing of the given context and parameters become the discussion topics.
keywords	Augmented reality, virtual world, massing strategies; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia17_28
id	acadia17_28
authors	Aguiar, Rita; Cardoso, Carmo; Leit?o,António
year	2017
title	Algorithmic Design and Analysis Fusing Disciplines
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 28-37
doi	https://doi.org/10.52842/conf.acadia.2017.028
summary	In the past, there has been a rapid evolution in computational tools to represent and analyze architectural designs. Analysis tools can be used in all stages of the design process, but they are often only used in the final stages, where it might be too late to impact the design. This is due to the considerable time and effort typically needed to produce the analytical models required by the analysis tools. A possible solution would be to convert the digital architectural models into analytical ones, but unfortunately, this often results in errors and frequently the analytical models need to be built almost from scratch. These issues discourage architects from doing a performance-oriented exploration of their designs in the early stages of a project. To overcome these issues, we propose Algorithmic Design and Analysis, a method for analysis that is based on adapting and extending an algorithmic-based design representation so that the modeling operations can generate the elements of the analytical model containing solely the information required by the analysis tool. Using this method, the same algorithm that produces the digital architectural model can also automatically generate analytical models for different types of analysis. Using the proposed method, there is no information loss and architects do not need additional work to perform the analysis. This encourages architects to explore several design alternatives while taking into account the design’s performance. Moreover, when architects know the set of design variations they wish to analyze beforehand, they can easily automate the analysis process.
keywords	design methods; information processing; simulation & optimization; BIM; generative system
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_175
id	ecaade2017_175
authors	Alfaiate, Pedro and Leit?o, António
year	2017
title	Luna Moth - A Web-based Programming Environment for Generative Design
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 511-518
doi	https://doi.org/10.52842/conf.ecaade.2017.2.511
summary	Current Generative Design (GD) tools require installation and regular updates. On top of that, programs that are created using them are stored as files, which have to be moved and shared manually with others. On the other hand, web applications are accessible using just a web browser and they can also store information remotely, meaning that it does not need to be moved and is easily shared with others. Consequently, GD tools should also be available as web applications to get the same functionality. We present Luna Moth, an IDE for GD available from the web that shows the relationship between a program and its results and integrates into the architect's workflow. Then, we give examples where Luna Moth's features help the architect during the programming process. Finally, we compare Luna Moth's performance with other IDEs, namely, Grasshopper, OpenJSCAD, and Rosetta.
keywords	Generative Design; Web application; Design tool integration;
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_038
id	ecaade2017_038
authors	Asanowicz, Aleksander
year	2017
title	Parametric design - Tool, medium or new paradigm?
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 379-386
doi	https://doi.org/10.52842/conf.ecaade.2017.2.379
summary	Parametric design is an emerging research issue in the design domain. However, discussions about the creative process in parametric design are limited. What is more, despite the passing of 57 years of parametric design's existence we still do not know what parametric design is. Is it a simple tool, which is useful in some kind of optimization of the architectural form, or it is a medium, which helps architects develop unexpected solutions, and perhaps this is already a new design paradigm? The presented paper will contain general considerations relating to the nature of parametric design, the history of which starts in 1960, when D.T. Ross has formulated the thesis that our main objective is to formulate constrains and all needed parameters of the solved problem.Please write your abstract here by clicking this paragraph.
keywords	optimisation; parametric design; design tool; design media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_181
id	ecaade2017_181
authors	Balaban, Özgün and Tunçer, Bige
year	2017
title	Visualizing and Analising Urban Leisure Runs by Using Sports Tracking Data
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 533-540
doi	https://doi.org/10.52842/conf.ecaade.2017.1.533
summary	Recently there has been a significant growth on the usage of personal fitness applications running on smart phones or fitness devices. These applications record millions of GPS points generated from the paths of runners. This data can be analyzed to comprehend behavior of runners within a specific location. In this study, using data generated from several sources such as Endomondo and Strava and other complementary data such as climate data, population data etc., we aim to find out the factors affecting running behavior in urban settings. For this purpose, visualizations of running activities are plotted with different variables by using BIG-DID, a software tool we developed as part of this study. Additionally, an evaluation of the tools used or can be used for data analysis and visualizations discussed. Finally, a linear regression model is introduced, which will be further developed in later stages of this study.
keywords	Big Data; Urban Visualization; Fitness Applications; Leisure Runs
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_208
id	ecaade2017_208
authors	Beaudry Marchand, Emmanuel, Han, Xueying and Dorta, Tomás
year	2017
title	Immersive retrospection by video-photogrammetry - UX assessment tool of interactions in museums, a case study
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 729-738
doi	https://doi.org/10.52842/conf.ecaade.2017.2.729
summary	Studying interactions in museums often omits to consider the complexity of the space and the visitors' behaviors. Visitors' walking paths do not provide enough insight of their user experience (UX) since they are distant from the experiential realities. Videogrammetry can convey such dimensions of an environmental experience. Because of limitations of real-time playback, a twofold approach is suggested: "immersive videos" combined with "photogrammetric models". A granular optimal experience assessment method using retrospection interviews is also applied providing a finer evaluation of the perceived experience through time. This method permits to characterize museum interactive installations, according to the perceived challenges and skills of the interaction's task, based this time on immersive retrospection. This paper proposes the "Immersive retrospection" by "Immersive video-photogrammetry" as a UX assessment tool of interactions in museums. A hybrid virtual environment was used in this study, allowing social VR without the use of headsets, through a life-sized projection of interactive 3D content. The study showed that Immersive video-photogrammetry facilitates the recall of memories and allows a deepened self-observation analysis.
keywords	immersive retrospection; photogrammetry; videogrammetry; UX assessment; museum environments
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_146
id	acadia17_146
authors	Black, Conor; Forwood, Ed
year	2017
title	Game Engine Computation for Serious Engineering: Visualisation and Analysis of Building Facade Movements as a Consequence of Loads on the Primary Structure
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 146-153
doi	https://doi.org/10.52842/conf.acadia.2017.146
summary	This paper demonstrates the innovative use of game engines as a tool in the analysis and communication of complex structural engineering. It specifically looks at the relationship between a building’s primary structure and its façade. The analysis and visualisations, scripted using the Game Engine Unity3D, focuses on visualising the implications of movements from the primary structure [under various load cases] on the façade. This paper describes the novel process by which Unity3D is utilised to create an applet which imports displacements from structural software and post-processes the data to visualise the complex effect on façade panels according to its support conditions. It demonstrates that visualising facade movements in real-time, as opposed to current, static report-based descriptions, provide access for the comprehension of more complex building systems. This therefore has the possibility to reduce safety factors applied to facade movement joints.
keywords	design methods; information processing; game engines; fabrication; simulation & optimization
series	ACADIA
email
last changed	2022/06/07 07:52

_id	ecaade2017_173
id	ecaade2017_173
authors	Buš, Peter, Hess, Tanja, Treyer, Lukas, Knecht, Katja and Lu, Hangxin
year	2017
title	On-site participation linking idea sketches and information technologies - User-driven Customised Environments
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 543-550
doi	https://doi.org/10.52842/conf.ecaade.2017.1.543
summary	The paper introduces the methodology related to the topic of citizen-driven urban design and revises the idea of on-site participation of end-users, which could prospectively lead to customisation of architectural and urban space in a full-scale. The research in the first phase addresses the engagement of information technologies used for idea sketching in participatory design workshop related to local urban issues in the city of Chur in Switzerland by means of the Skity tool, the sketching on-line platform running on all devices. Skity allows user, which can be individual citizens or a community, to sketch, build, and adapt their ideas for the improvement of an urban locality. The participant is the expert of the locality because he or she lives in this place every day. The content of this paper is focused on the participatory design research project conducted as a study at the ETH Zürich and the Hochschule für Technik und Wirtschaft HTW in Chur in collaboration with Future Cities Laboratory in Singapore, mainly concentrated on the first step of the methodological approach introduced here.
keywords	responsive cities; urban mass-customisation; idea sketching; ideation; on-site participation; citizen design science
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia17_170
id	acadia17_170
authors	Byrne, Ultan
year	2017
title	Point-Cloud-Paint: A Software Tool for Speculative Urban Design Using Three-Dimensional Digital Collage
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 170-177
doi	https://doi.org/10.52842/conf.acadia.2017.170
summary	Beginning from a provocation in Auguste Blanqui’s Eternity by the Stars, this paper reports on a new methodology of digital collage for urban design. The research is situated relative to the current discourses surrounding both voxelization and point-cloud data structures in order to motivate the concept of a recombinant approach to design in existing cities. Building on these sources, and with reference to recent developments in mesh shape composition techniques, the paper presents the resulting software implementation “Point-Cloud-Paint”: a tool that enables collage-based combinatorial experimentation with urban point-cloud data.
keywords	simulation; representation; design methods; information processing
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ecaade2017_244
id	ecaade2017_244
authors	Chaltiel, Stephanie, Bravo, Maite and Chronis, Angelos
year	2017
title	Digital fabrication with Virtual and Augmented Reality for Monolithic Shells
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 211-218
doi	https://doi.org/10.52842/conf.ecaade.2017.2.211
summary	The digital fabrication of monolithic shell structures is presenting some challenges related to the interface between computational design and fabrication techniques, such as the methods chosen for the suitable parametrization of the geometry based on materiality characteristics and construction constrains, the digital optimization criteria of variables, and the translation of the relevant code used for digital fabrication. Specifically, the translation from the digital to the physical when a definite materiality appears during the digital fabrication process proves to be a crucial step, which is typically approached as a linear and predetermined sequence. This often-difficult step offers the potential of embedding a certain level of interactivity between the fabricator and the materialized model during the fabrication process in order to allow for real time adjustments or corrections. This paper features monolithic shell construction processes that promote a simple interface of live interaction between the fabricator and the tool control during the digital fabrication process. The implementation of novel digital and physical methods will be explored, offering the possibility of being combined with automated fabrication actions controlled by real time inputs with virtual reality [VR] influenced by 3d scanning and 3d CAD programs, and the possibility of incorporating augmented reality [AR].
keywords	virtual reality; augmented reality; monolithic shells
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2017_249
id	ecaade2017_249
authors	Coraglia, Ugo Maria, Simeone, Davide, Cursi, Stefano, Fioravanti, Antonio, Wurzer, Gabriel and D'Alessandro, Daniela
year	2017
title	A Simulation Model for Logical and Operative Clash Detection
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 519-526
doi	https://doi.org/10.52842/conf.ecaade.2017.2.519
summary	The introduction of the Building Information Modeling (BIM) approach has facilitated the management process of documents produced by different kinds of professionals involved in the design and/or renovation of a building, through identification and subsequent management of geometrical interferences (Clash Detection). The methodology of this research proposes a tool to support Clash Detection, introducing the logical-operative dimension, that may occur with the presence of a construction site within a hospital structure, through the integration of a BIM model within a Game Engine environment, to preserve the continuity of daily hospital activities and trying to reduce negative impacts, times and costs due to construction activities.
keywords	Construction site; Hospital; Game Engine; Gaming; Building Information Modeling (BIM); Simulation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_002
id	ecaade2017_002
authors	Costa, Fábio, Eloy, Sara, Sales Dias, Miguel and Lopes, Mariana
year	2017
title	ARch4models - A tool to augment physical scale models
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 711-718
doi	https://doi.org/10.52842/conf.ecaade.2017.1.711
summary	This paper focus on the development and evaluation of a computer tool that enriches physical scale models of buildings, which are commonly used during architecture and civil engineering design processes. The main goal of this work is to enable designers, namely architects, to use the affordances of the physical scale models, by enhancing them with digital characteristics that can be easily changed, allowing an enriched interaction of the designer with such models. Our in-house developed Augmented Reality tool, referred to as ARch4models, augments the user experience with visual features and interactive capabilities, not possible to accomplish with physical models (see this video in https://goo.gl/5zbdTQ). The tool allows the coherent registration between the real and the digital in the same space. Satisfaction evaluation studies were conducted that have shown that ARch4models improves the building design process when compared with a traditional methodology employing solely physical scale models.
keywords	augmented reality; architecture; physical scale model; 3D model; AEC design process
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_069
id	ecaade2017_069
authors	D'Uva, Domenico
year	2017
title	Unfolding the design of architecture as a strategy to assess intellectual property - Bridle pirating architecture
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 297-302
doi	https://doi.org/10.52842/conf.ecaade.2017.1.297
summary	Modeling tools are evolving the process of architectural design from the use ordinary digital tool into a role of creator of complex shapes, through coding configurations. These procedures are becoming the structural ground of the architectural shape, going beyond their sole tools role. The increasing in importance of such codes implies a major level of awareness for their use, which is worth of a deeper analysis. The system of relations among parts in an architectural design picks a single configuration among infinite others, because it is produced by a design process which find its fulfillment in the final portray. Through the spreading of digital design tools, such final configuration becomes a step in a clearly reproducible process. The project is achieved through a series of starting conditions, which undergo a parametric process, that produces the final result. An identical parametric process can be applied under slightly different starting conditions and produce completely different results. These results are connected with the code which produced them, but is the authorship still property of the original author?
keywords	Morphogenesis; Parametric; Authorship
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2017_290
id	ecaade2017_290
authors	Di Giuda, Giuseppe Martino, Villa, Valentina, Ciribini, Angelo Luigi Camillo and Tagliabue, Lavinia Chiara
year	2017
title	Theory of Games and Contracts to define the Client role in Building Information Modeling
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 161-168
doi	https://doi.org/10.52842/conf.ecaade.2017.1.161
summary	This research focus on the application of Theory of Games and asymmetry information to the AEC sector underling the impact of these theories to the supply chain and in particular on the evolution of the client role in a Building Information Modeling process. The mentioned theories used to be applied to macroeconomic fields, but allowed the researchers to understand the evolution of the sector and the internal behavior of the team. This analysis of team behaviors permits to grasp how the contractual frame could hold up the natural trend of the market to collaborate, which leads the sector to improve itself. The Theory of Games could be adopted as a hermeneutic tool for understanding actions and agreements to which the various parties achieve. The research provided a global analysis on the evolution of the client role in a cyclical process. Further development of the research will be the application of the theory to a real case study to catch the real team behavior in a collaborative environment.
keywords	Building Information Modeling; game theory; contracts theory; hermeneutical approach
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2017_047
id	ecaade2017_047
authors	El Ahmar, Salma and Fioravanti, Antonio
year	2017
title	Evaluating the capability of EnergyPlus in simulating geometrically complex Double-Skin Facades through CFD modelling
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 757-764
doi	https://doi.org/10.52842/conf.ecaade.2017.1.757
summary	This paper represents a preliminary investigation into the appropriateness of using EnergyPlus as a simulation tool for Double-Skin Façades (DSFs) that are considered geometrically complex. It builds upon previous research conducted by the authors in which a DSF was designed and simulated for an existing office building in Cairo. For this verification, the DSF was simulated once more using Computational Fluid Dynamics (CFD) to evaluate the accuracy of the previously obtained results. The cavity temperature and the volume flow rate of the airflow provided by EnergyPlus are compared with those obtained by OpenFOAM CFD software. The results give a credible indication of the reliability of EnergyPlus and encourages further investigations. The strengths and limitations of each software are discussed.
keywords	Double-Skin Facades; Complex geometry; EnergyPlus; CFD
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2017_029
id	ecaade2017_029
authors	Gadelhak, Mahmoud, Lang, Werner and Petzold, Frank
year	2017
title	A Visualization Dashboard and Decision Support Tool for Building Integrated Performance Optimization
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 719-728
doi	https://doi.org/10.52842/conf.ecaade.2017.1.719
summary	Analyzing the results of multi-objective optimization and building performance simulation can be a very tedious process that requires navigating between different software and tools. There is a clear scarcity in visualization tools that combine methods for big data analysis and design decision support tools that integrate detailed information for each design and parameter. Having a single visualization tool that provides methods to both visualize and analyze a large amount of data, understand the relation between objectives and variables, and having the ability to compare and analyze the preferred designs thoroughly can support the process of design decision making. In this paper, previous attempts to develop better data visualization tools for both integrated building simulation and optimization outputs were analyzed, then guidelines and a visualization tool prototype that can be effective in decision making and analyzing multi-objective optimizations results was presented.
keywords	Multi-objective optimization; Building Performance Simulation; Simulation; Visualization tools
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia17_284
id	acadia17_284
authors	Hu, Zhengrong; Park, Ju Hong
year	2017
title	HalO [Indoor Positioning Mobile Platform]: A Data-Driven, Indoor-Positioning System With Bluetooth Low Energy Technology To Datafy Indoor Circulation And Classify Social Gathering Patterns For Assisting Post Occupancy Evaluation
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 284-291
doi	https://doi.org/10.52842/conf.acadia.2017.284
summary	Post-Occupancy Evaluation (POE) as an integrated field between architecture and sociology has created practical guidelines for evaluating indoor human behavior within a built environment. This research builds on recent attempts to integrate datafication and machine learning into POE practices that may one day assist Building Information Modeling (BIM) and multi-agent modeling. This research is based on two premises: 1) that the proliferation of Bluetooth Low Energy (BLE) technology allows us to collect a building user’s data cost-effectively and 2) that the growing application of machine learning algorithms allows us to process, analyze and synthesize data efficiently. This study illustrates that the mobile platform HalO can serve as a generic tool for datafication and automation of data analysis of the movement of a building user. In this research, the iOS mobile application HalO, combined with BLE beacons enable building providers (architects, developers, engineers and facility managers etc.) to collect the user’s indoor location data. Triangulation was used to pinpoint the user’s indoor positions, and k-means clustering was applied to classify users into different gathering groups. Through four research procedures—Design Intention Analysis, Data Collection, Data Storage and Data Analysis—the visualized and classified data helps building providers to better evaluate building performance, optimize building operations and improve the accuracy of simulations.
keywords	design methods; information processing; data mining; IoT; AI; machine learning
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ecaade2017_144
id	ecaade2017_144
authors	Lange, Christian J.
year	2017
title	Elements \| robotic interventions II
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 671-678
doi	https://doi.org/10.52842/conf.ecaade.2017.1.671
summary	Reviewing the current research trends in robotic fabrication around the world, the trajectory promises new opportunities for innovation in Architecture and the possible redefinition of the role of the Architect in the industry itself. New entrepreneurial, innovative start-ups are popping up everywhere challenging the traditional model of the architect. However, it also poses new questions and challenges in the education of the architect today. What are the appropriate pedagogical methods to instill enthusiasm for new technologies, materials, and craft? How do we avoid the pure application of pre-set tools, such as the use of the laser cutter has become, which in many schools around the world has caused problems rather than solving problems? How do we teach students to invent their tools especially in a society that doesn't have a strong background in the making? The primary focus of this paper is on how architectural CAAD/ CAM education through the use of robotic fabrication can enhance student's understanding, passion and knowledge of materiality, technology, and craftsmanship. The paper is based on the pedagogical set-up and method of an M. Arch I studio that was taught by the author in fall 2016 with the focus on robotic fabrication, materiality, traditional timber construction systems, tool design and digital and physical craftsmanship.
keywords	CAAD Education, Digital Technology, Craftsmanship, Material Studies, Tool Design, Parametric Modeling, Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: