Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 140

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2017_288
id	ecaade2017_288
authors	Emo, Beatrix, Treyer, Lukas, Schmitt, Gerhard and Hoelscher, Christoph
year	2017
title	Towards defining perceived urban density
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 637-646
doi	https://doi.org/10.52842/conf.ecaade.2017.2.637
summary	The aim of the paper is to identify parameters that influence perceived urban density. Whilst it is standard for architects and planners to consider urban density, there is often no consideration of how individuals might perceive such density. We report the findings of a study in which participants rate photographs of urban scenes according to perceived urban density. The case study area is central Zurich, Switzerland. The images are analyzed according to six parameters: visibility, amount of buildings, street width, amount of sky, amount of green space, and amount of vehicles. We report the findings of where images were ranked along a scale from lowest to highest perceived urban density. Findings show that visibility alone is not enough to explain the rating of perceived urban density. The study is a first step towards reaching a definition of perceived urban density that can be applied to different urban contexts.
keywords	urban density; perception; behavioural study; 3D reconstruction
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2017_057
id	caadria2017_057
authors	Buš, Peter, Treyer, Lukas and Schmitt, Gerhard
year	2017
title	Urban Autopoiesis - Towards Adaptive Future Cities
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 695-704
doi	https://doi.org/10.52842/conf.caadria.2017.695
summary	A city, defined as a unity of inhabitants with their environment and showing self-creating and self-maintaining properties, can be considered as an autopoietic system if we take into account its bottom-up processes with unpredictable behaviour of its components. Such a property can lead to self-creation of urban patterns. These processes are studied in well-known vernacular architectures and informal settlements around the world and they are able to adapt according to various conditions and forces. The main research objective is to establish a computational design-modelling framework for modelling autopoietic intricate characteristics of a city based on an adaptability, self-maintenance and self-generation of urban patterns with adequate visual representation.The paper introduces a modelling methodology that allows to combine planning tasks with inhabitants' interaction and data sources by using an interchange framework to model more complex urban dynamics. The research yields preliminary results tested in a simulation model of a redevelopment of Tanjong Pagar Waterfront, the container terminal in the city of Singapore being transformed into a new future centre as a conducted case study.
keywords	Urban Metabolism; Urban Autopoiesis; Computational Interchange; Emergent Urban Strategies; Adaptive City
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2017_042
id	caadria2017_042
authors	Coorey, Ben and Coorey, Anycie
year	2017
title	Generating Urban Form
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 261-269
doi	https://doi.org/10.52842/conf.caadria.2017.261
summary	Modern design of urban forms is venturing towards performative, site-specific architecture that are formed according to the attributes of its urban context. Parametric modelling techniques offer designers the ability to embed generative mechanisms into the design process to allow performance based design. This paper focuses on the development of a synthesis model that generates an Urban Form schema using computational design principles. The design system illustrates a rule-based systematic approach to urban form generation and is a precursor to the automatic exploration of urban forms based on design analytics and evaluation of urban metrics. The role of the architect begins to shift from the designer of objects to the designer of processes with urban planning following a trajectory of data-generated and contextual specific design.
keywords	Parametric Modelling; Urban Modelling; Scripting; Urban Analysis
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2017_048
id	ecaade2017_048
authors	Dennemark, Martin, Schneider, Sven, Koenig, Reinhard, Abdulmawla, Abdulmalik and Donath, Dirk
year	2017
title	Towards a modular design strategy for urban masterplanning - Experiences from a parametric urban design studio on emerging cities in Ethiopia
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 485-494
doi	https://doi.org/10.52842/conf.ecaade.2017.1.485
summary	In emerging countries there is a need for rapid urban planning, since they are confronted by unprecedented wave of urbanization. This need is even bigger since usually there is no adequate number of professional educated urban planners in these countries. Therefore, we investigate in this paper how to develop a set of methods that allow to generate urban fabric semi-automatically. The challenge is to come up with a generative planning model that adapts to multiple boundary conditions.Through a modular design strategy generative methods are applied by students in an urban design studio in order to combine them into more complex planning strategies for small cities in the emerging country of Ethiopia. The modular approach allows to break down planning into sub-issues to better deal with the overarching problem. For testing the implemented generative urban design strategies various cities are generated at different locations in Ethiopia with various topographic situations. Their underlying design strategies and modular approach are discussed in this paper.
keywords	Urban Design; Planning Systems; Modules; Teaching; Emerging Country
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2021_103
id	ecaade2021_103
authors	Hussein, Hussein E. M., Agkathidis, Asterios and Kronenburg, Robert
year	2021
title	Towards a Free-form Transformable Structure - A critical review for the attempts of developing reconfigurable structures that can deliver variable free-form geometries
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 381-390
doi	https://doi.org/10.52842/conf.ecaade.2021.2.381
summary	In continuation of our previous research (Hussein, et al., 2017), this paper examines the kinetic transformable spatial-bar structures that can alter their forms from any free-form geometry to another, which can be named as Free-form transformable structures (FFTS). Since 1994, some precedents have been proposed FFTS for many applications such as controlling solar gain, providing interactive kinetic forms, and control the users' movement within architectural/urban spaces. This research includes a comparative analysis and a critical review of eight FFTS precedents, which revealed some design and technical considerations, issues, and design and evaluation challenges due to the FFTS ability to deliver infinite unpredictable form variations. Additionally, this research presents our novel algorithmic framework to design and evaluate the infinite form variations of FFTS and an actuated prototype that achieved the required movement. The findings of this study revealed some significant design and technical challenges and limitations that require further research work.
keywords	Kinetic transformable structures; finite element analysis; form-finding; deployable structures; Grasshopper 3D; Karamba 3D
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2017_066
id	cf2017_066
authors	Jenney, Sarah Louise; Petzold, Frank
year	2017
title	Question of Perspective: Information Visualisation in Games and its Possible Application in Planning Communication
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 66-83.
summary	The densification of urban spaces is a major challenge for future cities. With new forms of online consultation, we observe a movement towards open government in urban planning. A stronger participation between a more diverse body of players in a networked environment, is unveiling various discrepancies in the understanding of projects by the different actors in planning, due to access to and the comprehension of planning information. To recognise and utilise the associated capabilities of current transformations, communication between the actors in planning and their sharing of knowledge is vitally important. Information visualisation is an essential form of communication, prompting this explorative paper in considering elements specific to games visualisation and their implications for urban planning. Based on a framework for information visualisation in games it was found that the specifications for actor groups in planning processes mirror the specifications specific to target audience groups in games.
keywords	Gamification, Urban Design, Information Visualisation, Collaborative Design, Public Participation
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	caadria2017_027
id	caadria2017_027
authors	Johanson, Madeleine, Khan, Nazmul, Asher, Rob, Butler, Andrew and Haeusler, M. Hank
year	2017
title	Urban Pinboard - Establishing a Bi-directional Workflow Between Web-based Platforms and Computational Tools
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 715-724
doi	https://doi.org/10.52842/conf.caadria.2017.715
summary	Architecture is heading towards a future where data is collected, collated and presented in a dynamic platform. There is a potential for many standard processes in the industry to become automated, such as the site analysis process. Streamlining aspects of the design process allows architects to pay greater attention on creative design solutions for their buildings and less time engaging in complex, time consuming analytical programs. Urban Pinboard, a web-based GIS platform, promises to establish a bi-directional workflow between web data depositories and computational tools through the medium of a website. By doing so, the website allows users with minimal experience in computational processes to be engaged in the utilisation of these large datasets. Through the automation of these processes, relationships within the built environment industry can excel, leading towards performative driven designs.
keywords	Urban Planning; Computational Urbanism; Data-driven Design; New Workflow Models; Software Development.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia17_298
id	acadia17_298
authors	Johnson, Jason S.; Gardner, Guy
year	2017
title	Pareidolic Formations
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 298- 307
doi	https://doi.org/10.52842/conf.acadia.2017.298
summary	The use of ornament in public space has been contested throughout history, and attitudes towards the articulation of building surfaces have shifted over time. Antoine Picon has argued that the use of ornament to communicate meaning and identity is returning to a place of cultural prominence. Well-established digital design and fabrication technologies have given rise to projects that integrate performance and aesthetics through the exploitation of form, pattern and ornament. These techniques allow the designer to inscribe and overlay data generated through performance simulation and environmental analysis, and formal relationships and fabrication processes onto materials and spatial fields, creating novel configurations and effects. Operating at a scale between object and building, public art, sculpture and architectural ornament allow for a particular type of interdisciplinary experimentation and hybrid practice. Three recent public art proposals illustrate an approach that composites multiple datasets to generate new relationships between aesthetic, environmental and functional considerations in order to activate public space. The proposals presented here put forward a set of tactics that can be deployed towards embedding overlapping data in public spaces. These proposals use pattern to form and form to pattern workflows as a way to produce multiple potential readings through pareidolia. This paper presents an investigation into how contemporary digital design and fabrication processes can bridge between performance and perception, and how ornament and pattern might be deployed for both formal and performative purposes to help foster a more personalized relationship with the urban spaces we occupy.
keywords	education, society & culture; data mining; form finding; education
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cf2017_111
id	cf2017_111
authors	Kepczynska-Walczak, Anetta; Pietrzak, Anna
year	2017
title	An Experimental Methodology for Urban Morphology Analysis
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 111.
summary	The paper presents results of a research conducted in 2015 and 2016 at Lodz University of Technology. It proposes a purpose and context fit approach towards the automation of urban data generation based on GIS tools and New Urbanism typologies. First, background studies of methods applied in urban morphology analysis are revealed. Form-Based Code planning, and subsequently Transect-Based Code are taken into account. Then, selected examples from literature are described and discussed. Finally, the research study is presented and the outcomes compared with more traditional methodology.
keywords	GIS, Urban morphology, Spatial analysis, Decision support systems, Urban design, Data analytics, Modelling and simulation
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	ecaade2017_194
id	ecaade2017_194
authors	Michielsen, Dieter, Dalle, Tonia, Usai, Mara, Romero, Rosaura and Pak, Burak
year	2017
title	Learning Participatory Urban Research - Towards a Network of Collective Ingenuity (OURB)
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 551-560
doi	https://doi.org/10.52842/conf.ecaade.2017.1.551
summary	This research was put together by four Master's students from KU Leuven Faculty of Architecture, who are self-motivated to investigate the possibilities of collective methods for designing within the Urban context. This paper is divided into two parts, the first being a scholarly investigation into learning from the collective mentality shift, and movements; discovering the added values of operating immersion/eversion from the virtual worlds to the physical one and analyzing key factors for engaging the public on online communities. Following, the paper brings to light the challenges the future of urban planning faces during today's digital shift and the solutions possible through the introduction of digital platforms as support to urban planning structures. The second part is the complementation of the first, as the research team showcases the findings by testing out the learned concepts and conducting on-field social experiments. The paper concludes with an analysis of the results, and future directions to the research project.
keywords	collaboration; co-creation; collective ingenuity; digital platforms; social engagement
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2017_079
id	caadria2017_079
authors	Miyake, Munetoshi, Fukuda, Tomohiro, Yabuki, Nobuyoshi and Motamedi, Ali
year	2017
title	Outdoor MarkerLess Augmented Reality - A System for Visualizing Building Models Using Simultaneous Localization and Mapping
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 95-104
doi	https://doi.org/10.52842/conf.caadria.2017.095
summary	In this study, an Augmented Reality (AR) system is developed to be used for visualizing design projects of buildings. In such design projects, it is desirable to enable design stakeholders visualizing the outcomes of different design options to reduce the resistance and hesitation towards new design challenges. The research proposes an outdoor mark-er-less AR using Simultaneous Localization and Mapping (SLAM) for the AR tracking. Our proposed system performs reconstruction and localization steps in real-time, as opposed to similar methods in which the reconstruction step is done offline. A case study has been performed for a de-sign scenario of buildings. The case study verified the performance of visualization and tracking.
keywords	Architecture and urban environment; Augmented Reality (AR); Simultaneous Localization and Mapping (SLAM); Visualization
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2017_066
id	ecaade2017_066
authors	Panagoulia, Eleanna
year	2017
title	The role of Open Data in identifying and evaluating the Livability of Urban Space - Importance and Method
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 495-504
doi	https://doi.org/10.52842/conf.ecaade.2017.1.495
summary	The past decade has experienced a staggering rise of data-aided analysis that facilitate understanding the impact of socio-economic flux and socially oriented activities towards the quality and livability of space. Evaluating urban environments is not only important from the planners' perspective, but has larger implications for the residents themselves. In this paper we argue that the livability of a city or a neighborhood is not necessarily described by conventional, authoritative data, such as income, crime, education level etc., but the combination with ephemeral data layers, related to human perception and desire, can be more effective in capturing the dynamics of space. Implementing methods that are considered disassociated with urban analytics, we attempt to go beyond the conventions in understanding the dynamics that drive socio-economic phenomena and construct lived space. Our objective is to create methodologies of anticipating and evaluating urban environment by re-patterning different datasets and taking advantage of their combinatory potential.
keywords	Livability; Data-aided Analysis; Open Data; Human Factor
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_023
id	ecaade2017_023
authors	Pankiewicz, Mateusz
year	2017
title	Causes and effects - Methodologies used in digitalization of architectural-urban heritage
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 25-30
doi	https://doi.org/10.52842/conf.ecaade.2017.2.025
summary	Since some time already, digital reconstructions in architecture, urbanism and archaeology are gradually switching from describing built heritage as a collection of static and unchangeable entities towards more compound and explicit presentation and knowledge management techniques. This includes for instance data management and multimedia systems, immersive environments or semantic information modelling such as GIS (Geospatial Information Systems), BIM (Building Information Modeling) or HBIM (Historic Building Information Modeling). Graphical user interfaces, interaction and usability have become an essential part of produced reconstructions. This shift in terms of dissemination of an architectural and urban heritage that is supposed to increase the social awareness and participation should be structured in a way that enables recipients originating from different backgrounds to grasp information pertaining to almost any knowledge domain, allowing for self-exploration and interpretation of presented knowledge. This paper discusses important nodes of the reconstruction process in the spirit of informative modelling that are characteristic for any possible approach towards conscious heritage representations.
keywords	Informative modelling; Spatio-temporal modelling; Cultural heritage
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2017_264
id	ecaade2017_264
authors	Verniz, Debora and Duarte, José Pinto
year	2017
title	Santa Marta Urban Grammar - Towards an understanding of the genesis of form
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 477-484
doi	https://doi.org/10.52842/conf.ecaade.2017.2.477
summary	The research presented here aims to understand how spontaneous occupation in informal settlements evolves, how to develop guidelines for the requalification of these settlements, and how to plan new settlements in similar conditions. This paper focuses on the use of a parametric urban grammar as a methodology to describe the complex urban form of informal settlements, explaining how buildings and pathways create the maze-like urban structure, how different building typologies are located according to internal and external forces like topography, and urban context and functional organization of these buildings.
keywords	Santa Marta; informal settlement; shape grammar; urban grammar
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2017_143
id	ecaade2017_143
authors	Pizzigoni, Attilio, Paris, Vittorio, Micheletti, Andrea and Ruscica, Giuseppe
year	2017
title	Advanced tools and algorithms for parametric landscape urbanism
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 461-470
doi	https://doi.org/10.52842/conf.ecaade.2017.1.461
summary	In the last decades, urban design has been influenced by its relationship with landscape. This has led to a new approach formalised and called Landscape Urbanism. Defining specific reading and analysis instruments together with proper design methods, capable of a transdisciplinary dialogue with geography, plant and biological world's languages, landscape urbanism can undoubtedly obtain more performing purposes than the ones achieved by traditional urban planning. Moreover, new digital tools are appearing, providing urbanism with new instruments for an advanced and interactive way to design cities in close relationship with landscape. The process starts with the acquisition of large quantity of data, like georeferenced maps in conjunction with relevant information about the territory, such as traffic and atmospheric pollution data, important buildings and monuments or significant landscape elements (rivers, mountains, etc.). All this information is combined onto multiple layers in order to be used by different design algorithms, connected by multi-dimensional arrays, whose reciprocal relations are dynamically controlled by architects and engineers. We will present here the case study of an ecological and regenerative infrastructure for the city of Bergamo designed on the basis of these principles, using a convenient combination of parametric tools.
keywords	algorithmic city planning; landscape urbanism; post-urban architecture
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2017_067
id	sigradi2017_067
authors	Vasconcellos de Almeida, Rhaiani; Larissa Leticia Andara Ramos, Luciana Aparecida Netto de Jesus
year	2017
title	Estudo sobre os espaços livres de uso público e áreas verdes da regional 02 - grande ibes, município de vila velha - es [A Study on public spaces and green areas of the region 02 - large ibes / Municipality of Vila Velha (ES)]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.453-460
summary	This work presents a mapping of the spaces of public use and of the green areas of the municipality of Vila Velha - ES, having as a cutback the Regional 02 - Grande Ibes. The mapping was performed in the ArcGIS georeferencing program, through analysis of the images of Google Earth based on the data obtained in the Municipal Master Plan and visits to the sites. As result, an expressive number of spaces for social practice was perceived, in contrast there is a deficit in the maintenance and imbalance in the distribution of these spaces. The identified green areas are located at the ends of the regional, benefiting only the surrounding neighborhoods.
keywords	Public spaces; Social practices; Urban quality; Urban planning.
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2017_016
id	sigradi2017_016
authors	Alexandre da Silva, Geovany Jessé; Carlos Alejandro Nome, Lucy Donegan
year	2017
title	Ferramentas de Projeto para análise da qualidade urbana: Relacionando forma, usos, densidade e configuração espacial na cidade de João Pessoa, Brasil. [Design tools to assess urban quality: Relating form, uses, density and spatial configuration in João Pessoa city, Brazil.]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.123-129
summary	This paper describes an experience in a Graduate course Architecture and Urbanism that used computational tools to analyze urban quality – considering form, uses, density and spatial configuration (based on visual and fields) – in different urban areas in the city of João Pessoa. Understanding that the city is a problem in organized complexity, different aspects condition the quality of use of spaces and reveal urban dynamics. Urban analysis aided by computational tools revealed successful in characterizing different problems and potentialities that can lay the foundation for interventions with more urban quality.
keywords	Design computational tools; Study of urban form, uses and density; Urban space performance; Spatial configuration.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2017_101
id	caadria2017_101
authors	Dounas, Theodoros, Spaeth, Benjamin, Wu, Hao and Zhang, Chenke
year	2017
title	Speculative Urban Types - A Cellular Automata Evolutionary Approach
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 313-322
doi	https://doi.org/10.52842/conf.caadria.2017.313
summary	The accelerated rate of urbanization in China is the motivator behind this paper. As a response to the observed monotonous housing developments in Suzhou Industrial Park (SIP) and elsewhere our method exploits Cellular Automata (CA) combined with fitness evaluation algorithms to explore speculatively the potential of building regulations for increased density and diversity through an automated design algorithm. The well-known Game of Life CA is extended from its original 2-dimensional functionality into the realm of three dimensions and enriched with the possibility of resizing the involved cells according to their function. Moreover our method integrates the "social condenser" as a means of diversifying functional distribution within the Cellular Automata as well as solar radiation as requested by the existing building regulation. The method achieves a densification of the development from 31% to 39% ratio of footprint to occupied volume whilst obeying the solar radiation rule and offering a more diverse functional occupation. This proof of concept demonstrates a solid approach to the automated design of housing developments at an urban scale with a ,yet limited, evaluation procedure including solar radiation which can be extended to other performance criteria in future work.
keywords	integrated Speculation; Generative Urbanism; Cellular Automata
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2017_648
id	cf2017_648
authors	Dounas, Theodoros; Spaeth, A. Benjamin; Wu, Hao; Zhang, Chenke
year	2017
title	Dense Urban Typologies and the Game of Life: Evolving Cellular Automata
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 648-666.
summary	The ongoing rate of urbanization in China is the motivator behind this paper. As a response to the observed monotonous housing developments in Suzhou Industrial Park (SIP) and elsewhere our method exploits Cellular Automata (CA) combined with fitness evaluation algorithms to explore speculatively the potential of existing developments and respective building regulations for increased density and diversity through an automated design algorithm. The well-known Game of Life CA is extended from its original 2-dimensional functionality into the realm of three dimensions and enriched with the opportunity of resizing the involved cells according to their function. Moreover our method integrates an earlier technique of constrcuctivists namely the “social condenser” as a means of diversifying functional distribution within the Cellular Automata as well as solar radiation as requested by the existing building regulation. The method achieves a densification of the development from 31% to 39% ratio of footprint to occupied volume whilst obeying the solar radiation rule and offering a more diverse functional occupation. This proof of concept demonstrates a solid approach to the automated design of housing developments at an urban scale with a ,yet limited, evaluation procedure including solar radiation which can be extended to other performance criteria in future work.
keywords	Evolutionary Design, Generative Urbanism, Integrated Strategy
series	CAAD Futures
email
last changed	2017/12/01 14:38

For more results click below: