Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 27

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2018_1268
id	sigradi2018_1268
authors	Louise Jenney, Sarah; Mühlhaus, Michael; Petzold, Frank
year	2018
title	Connect, Motivate, Communicate: A Foundation for Gamification in Planning Communication
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1105-1111
summary	Planning in the urban context is always a complex task in which the diverse interests of different stakeholders have to be weighed up against each other. For this to happen, communication is the key leading to successful and sustainable solutions. Often objective factors like the number and diversity of participating stakeholders is the benchmark for successful planning processes. We examine the motivational factors of the different main stakeholder groups and give an insight in the complex system of motivational and hindering factors that need to be considered when designing engaging sensible and sustainable exchange of knowledge and interests.
keywords	Motivation; Gamification; Communication; Participation; Collaboration
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
doi	https://doi.org/10.52842/conf.acadia.2018.394
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v3_157
id	acadia23_v3_157
authors	C Niquille, Simone
year	2023
title	Model Home
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Well, hello. Thanks for having me. Hopefully, not everyone is too exhausted. But we'll get through it. So, you know, in some ways I feel like a guest, an intruder -- there's different words -- to a conference such as this. I am trained as a graphic designer and a photographer. But somehow, you know, I find myself between disciplines. And one of them is architecture. What we will talk about today is a project that started around 2018 called ""Model Home"", which is sort of the larger chapter. Most of the work I do is either in writing essays, as well as film. There's not enough time to show the film today, but if you are interested, just come and ask me after.
series	ACADIA
type	keynote
email
last changed	2024/04/17 13:59

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia18_386
id	acadia18_386
authors	Chen, Canhui; Burry, Jane
year	2018
title	(Re)calibrating Construction Simplicity and Design Complexity
doi	https://doi.org/10.52842/conf.acadia.2018.386
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 386-393
summary	Construction simplicity is crucial to cost control, however design complexity is often necessary in order to meet particular spatial performance criteria. This paper presents a case study of a semi-enclosed meeting pod that has a brief that must contend with the seemingly contradictory conditions of the necessary geometric complexities imperative to improved acoustic performance and cost control in construction. A series of deep oculi are introduced as architectural elements to link the pod interior to the outside environment. Their reveals also introduce sound reflection and scattering, which contribute to the main acoustic goal of improved speech privacy. Represented as a three-dimensional funnel like shape, the reveal to each opening is unique in size, depth and angle. Traditionally, the manufacturing of such bespoke architectural elements in many cases resulted in lengthy and costly manufacturing processes. This paper investigates how the complex oculi shape variations can be manufactured using one universal mold. A workflow using mathematical and computational operations, a standardized fabrication approach and customization through tooling results in a high precision digital process to create particular calculated geometries, recalibrated at each stage to account for the paradoxical inexactitudes and inevitable tolerances.
keywords	work in progress,tolerance, developable surface, form finding, construction simplicity, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	sigradi2023_375
id	sigradi2023_375
authors	Consalter Diniz, Maria Luisa, Polverini Boeing, Lais, dos Santos Carvalho, Wendel and Bertola Duarte, Rovenir
year	2023
title	Natural Language Processing, Sentiment Analysis, and Urban Studies: A Systematic Review
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1761–1772
summary	This paper discusses the potential of using data from social media and location data platforms to create cartographies that enhance our understanding of urban dynamics. Natural Language Processing (NLP) and sentiment analysis are highlighted as essential tools for comprehending and categorizing this data. The study conducted a systematic review of NLP and sentiment analysis applications in urban studies, covering 27 peer-reviewed journals and conference papers published between 2018 and 2023. The research classified applications into six categories: urban livability, governance and management, user and landscape perception, land use and zoning, public health, and transportation and mobility. Most studies primarily relied on data from social media platforms like Twitter and location data sources such as Google Maps and Trip Advisor. Challenges include dealing with irrelevant or misleading information in publicly available data and limited accuracy when analyzing sentiments of non-English-speaking populations.
keywords	Natural language processing, Sentiment analysis, Urban studies, Digital cartographies, Systematic review.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2018_347
id	ecaade2018_347
authors	Dokonal, Wolfgang
year	2018
title	Do Training Bikes Dream of Electric Cities ?
doi	https://doi.org/10.52842/conf.ecaade.2018.2.789
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 789-794
summary	Virtual reality (VR), Augmented Reality (AR) and Mixed Reality is making the headlines in the newspapers and magazines today. But unlike 25 years ago when the first VR rage started with the first Cave Automatic Virtual Environments (CAVE) infrastructures VR is now a technique that is available at very low costs.Especially the recent advances and developments in low cost VR hardware mainly the Head mounted displays (HMD), in particular those that use mobile phones but also the PC based systems like the Oculus Rift and the HTC Vive together with recent software developments allow this change. Naturally this is based on the interest of the Gaming Industry and the big players in the smartphone industry. But at the moment there are nearly no tools for architects available within these systems. In our point of view there is the big potential that these technologies can give new opportunities to architects and designers to use VR and AR as part of their design toolbox and not only as a presentation tool. For us this is the most important aspect. In our projects we therefore try to develop a workflow that can be easily used even without programming and scripting skills.
keywords	Virtual Reality; Interfaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_339
id	ecaade2018_339
authors	Fereos, Pavlos, Tsiliakos, Marios and Jaschke, Clara
year	2018
title	Spaceship Tectonics - Design Computation Pedagogy for Generative Sci-Fi Building Skins
doi	https://doi.org/10.52842/conf.ecaade.2018.2.357
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 357-366
summary	Sci-Fi architecture, both as digital or physical representations, despite their inherent intricacy, lack the spatial depth of a structured interior, material definition or program information. This discrepancy, combined with the plethora of available sci-fi motifs, inspired the development of an integrated teaching approach with the academic objective to utilize computational methods for analysis, reproduction and composition of generative building skins, and consequently architecture, which aims to be 'outside of this world' as a sci-fi design quality-enriched result of our reality. The proposed methodology is implemented at the Spaceship Architecture Design Studio at the University of Innsbruck. Its capacity to achieve a successful assimilation of design computation in the curriculum is subsequently assessed by the documentation and quantitative/qualitative evaluation of the designs developed during two academic years, in line with a generative facade articulation schema, without however undermining the rest of the virtues of tectonic spaces. The introduction of a theme like sci-fi where the design objective is not clearly defined, is examined in comparison to similar approaches, towards the corroboration of the pedagogical method proposed.
keywords	Pedagogy; Computation; Facade Design; Generative; Sci-Fi; Patterns
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2018_159
id	ecaade2018_159
authors	Isanovic, Hatidza and Çolako?lu, Birgül
year	2018
title	Developing a Methodology for Learning BIM through Education-Practice Collaboration
doi	https://doi.org/10.52842/conf.ecaade.2018.1.241
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 241-246
summary	Architecture, like other practice-oriented schools, aims to teach skills and knowledge required in professional practice. The aspired architecture profession increasingly requires practitioners who are able to work in collaborative BIM environments. This creates a task for education to develop new ways of teaching BIM concepts and tools to prepare the next generations of students who will enter the work force. To address this need, this study developed a methodology for learning BIM in architecture education by establishing relationship between practice and education. As substantial part of methodology development process, this paper will present the ongoing research that focuses on collaborative teaching process between AE practitioners and teachers. The benefits and challenges of this process will be presented and discussed.
keywords	BIM; education-practice partnership; hybrid model; collaborative teaching; case method; hands-on
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_317
id	ecaade2018_317
authors	Kontovourkis, Odysseas and Doumanidis, Constantine C
year	2018
title	ICARUS Project - An Open Source Platform for Computer Programming in Architectural Teaching and Research
doi	https://doi.org/10.52842/conf.ecaade.2018.1.341
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 341-350
summary	This paper, presents an ongoing work entitled ICARUS, an abbreviation for 'Integrating Computerized ARchitecture with USers'. The aim of this work is to develop an open source platform for computer programming implemented in architecture, for teaching and research. In particular, the platform provides the framework for a simplified and user friendly textual programming methodology for the needs of our architectural institution. It consists of several modules like coding, plug-in and repository development, targeting to be publicly available in the future. The platform is created based on the Python programming language, which is run in Grasshopper, a plug-in for Rhino 3D. In the first phase of ICARUS development, several case studies within the framework of a postgraduate course are conducted, aiming at providing an overview of its potentials, limitations and generally, its impact on establishing a useful methodology for algorithmic thinking among students with little or no prior computer programming skills.
keywords	Computer programming; Open source platform; Parametric design; Plug-in development; Algorithmic thinking
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ijac201816407
id	ijac201816407
authors	Mahankali, Ranjeeth; Brian R. Johnson and Alex T. Anderson
year	2018
title	Deep learning in design workflows: The elusive design pixel
source	International Journal of Architectural Computing vol. 16 - no. 4, 328-340
summary	The recent wave of developments and research in the field of deep learning and artificial intelligence is causing the border between the intuitive and deterministic domains to be redrawn, especially in computer vision and natural language processing. As designers frequently invoke vision and language in the context of design, this article takes a step back to ask if deep learning’s capabilities might be applied to design workflows, especially in architecture. In addition to addressing this general question, the article discusses one of several prototypes, BIMToVec, developed to examine the use of deep learning in design. It employs techniques like those used in natural language processing to interpret building information models. The article also proposes a homogeneous data format, provisionally called a design pixel, which can store design information as spatial-semantic maps. This would make designers’ intuitive thoughts more accessible to deep learning algorithms while also allowing designers to communicate abstractly with design software.
keywords	Associative logic, creative processes, deep learning, embedding vectors, BIMToVec, homogeneous design data format, design pixel, idea persistence
series	journal
email
last changed	2019/08/07 14:04

_id	sigradi2018_1785
id	sigradi2018_1785
authors	Mendonça, David; Passaro, Andrés; Castro Henriques, Gonçalo
year	2018
title	WikiHouse: A Generativeandparametric tool to customize curved geometries
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 714-718
summary	Current research departs from the WikiHouse an open-source constructive system that enables self-construction and customization in engineered wood. The public platform favours the design and construction using CNC technology and digital manufacture. However, the system application and form vocabulary are bounded to orthogonal profiles geometry. Current research intended to automate the system in an algorithm and to expand the design to curved geometries, what was tested using digital fabrication in 1:1. The system developed allows the personalization of solutions of shell-like geometries that might use less material in more robust solutions, opening new design possibilities for the system.
keywords	WikiHouse; Digital fabrication; Open Source; Parametric design; curved geometries
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaaderis2023_45
id	ecaaderis2023_45
authors	Morton, David, Ahmed, Tarek MF and Humphery, Richard
year	2023
title	BIM and Teaching in Architecture: Current thinking and approaches
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 105–115
summary	Increasing use of BIM has represented a continuing shift in traditional assumptions on how we navigate the design process. BIM is affording the student the ability to gain a greater understanding of their design ideas via the exploration of scale, spatial organisation and structure, amongst many other design layers, in increasing levels of detail, at the same point in the design process. Architectural education is at a delayed tipping point where architectural students are increasingly looking towards BIM to streamline their design process drawn by the production of realistic visualisation, but with a lack of knowledge and skill in its application. With a lack of guidance and understanding around the application of BIM, the use of BIM in this manner overlooks the potential of BIM to construct and test virtual simulations of proposed schemes, to support design enquiry. A historical concern for the pedagogy constructed around the students’ design process is the application of methods and techniques that support the progression through the design process, (Ambrose, 2014; dash mei & Safari, 2018). This study examines the design process of architectural students and the interaction between analogue and digital methods used in design. These primary modes of communication, offer the opportunity to query the roles and rules of traditional architectural conventions around ‘problem finding’ and ‘problem solving’, challenging the ‘traditional’ design process examined by pioneers like Bruner (1966) and Schon (1987). These approaches are distilled from the findings of the study and presented as guidance to those teaching in architectural aBIMemia to align pedagogic goals to methods of abstraction in this new era of design education reconsidering digital methods in design.
keywords	BIM, BIM, Design Process, Architecture, Learning
series	eCAADe
email
last changed	2024/02/05 14:28

_id	ecaade2018_110
id	ecaade2018_110
authors	Nguyen, Binh Vinh Duc, Watlom, Thanonchai, Peng, Chengzhi and Wang, Tsung-Hsien
year	2018
title	Prototyping Adaptive Architecture - Balancing Flexibility of Folding Patterns and Adaptability of Micro-Kinetic Movements
doi	https://doi.org/10.52842/conf.ecaade.2018.2.391
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 391-400
summary	The design process of dynamic architecture has been an emerging topic in recent studies, in which researchers try to find an effective method of generating and controlling adaptive components. In this paper, we present a digital-physical modelling process that seeks to explore tectonic fusion of origami folding patterns and micro-kinetic movements. A flexible modular prototype system is developed and evaluated through combining origami-based fabrication simulation and mathematical characterisation mimicking the pinecone's nastic movements. The modular design system is then applied to an urban site as a test case study. The results show how the pinecone-like nastic movements may be translated into design and fabrication of an adaptive architecture. We discuss the lessons learned from the digital-physical prototyping process finding the balance between geometric flexibility and micro-kinetic adaptability.
keywords	adaptive architecture; origami folding patterns; micro-kinetic movements; pinecone; parametric modelling; digital-physical prototyping
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2018_070
id	caadria2018_070
authors	Pandjaitan, Poltak
year	2018
title	Architectonics of Crystal Space
doi	https://doi.org/10.52842/conf.caadria.2018.1.183
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 183-192
summary	The basic research project addresses the question of spatiality in architecture and how to define space by geometrically mediating between spatialities. Based on interdisciplinary explorations of crystal structures and their specific constitutions, spatial paradigms are examined and implemented in the algebraic framework of crystals. The goal of the ongoing research is not to resemble and mimic these emergent crystal arrangements. It is only about the general principle of these formation processes particularly with regard to aperiodic quasicrystals. Through the purposive abstraction and translation of spatialities combined with the notion of crystals as a code like structure, it is possible to scrutinize the meaning of space in order to create space for new architectonical articulations.
keywords	crystal; quasicrystal; lattice; aperiodic; architectonics
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2018_375
id	ecaade2018_375
authors	Pienaru, Meram-Irina
year	2018
title	The City as a Playground - Game tools for interactive planning
doi	https://doi.org/10.52842/conf.ecaade.2018.2.679
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 679-686
summary	The emergence of a data space (Big Data and IoT) and, with it, the proliferation of communication means, led many scholars to describe the city through a series of concepts like the informational city, the intelligent city or the cybercity, all of them being characterized by a strong networked consciousness (Castells, Graham, Boyer). The hypothesis of this paper is that game methodology is now gaining momentum and can act as enabler of smarter communities by an increasing access to data infrastructures. This is why the city can be seen as a series of connected playgrounds where interactive tools can support citizen engagement and decision making processes. It does so by going through relevant theoretical background on gamification in the urban context and best practices, to finally describe two student projects developed at CHORA Conscious City, TU Berlin. The two projects are experimental and explore the capabilities of interactive tools in order to support planning processes.
keywords	Gamification; Interactive tools; Networked consciousness; Intelligent communities
series	eCAADe
email
last changed	2022/06/07 08:00

_id	sigradi2018_1724
id	sigradi2018_1724
authors	Ramos Pacheco, Paula; Sperling, David M.
year	2018
title	From DiY to DiWO: from Crafting to Digital Collaboration
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1313-1320
summary	Cultural changes based on recent development of information technologies suggests that knowledge could be spread with less control and greater accessibility, allowing the emergence of communities that launch alternatives like, for example, networks of laboratories for manufacturing. However, similar ambitions regarding the creation of alternatives to industrial production can be identified in the countercultural context of the 1960s and 1970s. This article traces some comparisons between these two historical moments with the goal of investigate how do-it-yourself (DiY) appears (again) in the design scene today as do-it-with-others (DiWO), establishing approximations and distances between two selected objects of study.
keywords	Open Design; Collaboration; Do-it-yourself; Do-it-with-others; Maker Movement
series	SIGRADI
email
last changed	2021/03/28 19:59

For more results click below: