Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 92

Reformat results as: short short into frame detailed detailed into frame

_id	ecaaderis2023_11
id	ecaaderis2023_11
authors	Sepúlveda, Abel, Eslamirad, Nasim, Seyed Salehi, Seyed Shahabaldin, Thalfeldt, Martin and De Luca, Francesco
year	2023
title	Machine Learning-based Optimization Design Workflow based on Obstruction Angles for Building Facades
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 15–24
summary	This paper proposes a ML-based optimization design workflow based on obstruction angles for the optimization of building facades (i.e. g-value and window width). The optimization output consists of the optimal clustering of windows in order to ensure a desired level of daylight provision according to method 2 defined in the EN17307:2018 (i.e. based on Spatial Daylight Autonomy: sDA) and to not exceed a maximum level of specific cooling capacity (SCC). The independent variables or design parameters of the parametric model are: room orientation/dimensions, window dimensions, and obstruction angle (??). The ML prediction models were trained and tested with reliable simulation results using validate softwares. The total number of room combinations is 61440 for sDA and SCC simulations. The development of reliable (90% of right predictions) ML predictive models based on decision tree technique were calibrated. The optimal clustering of windows was done first by floors and secondly by the designer’s need to homogenize the external facade with similar glazing properties and window sizes, having impact on the annual heating consumption. The proposed method help designers to make accurate and faster design decisions during early design stages and renovation plans.
keywords	optimization, daylight, thermal comfort, cooling capacity, machine-learning predictive model, office buildings, cold climates
series	eCAADe
email
last changed	2024/02/05 14:28

_id	sigradi2018_1483
id	sigradi2018_1483
authors	Dias Maciel, Sérgio; de Amorim, Arivaldo Leão; de Souza Checcucci, Érica; Bomfim Santos, Kyane
year	2018
title	The creative process in architectural design on a digital environment: an experience with beginner students
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1010-1016
summary	This article presents some results in the architectural design course, which were obtained by under graduate students in two experimental class organized at Federal University of Bahia in 2016 and 2017 years. The class Studio I, with incoming students (2016) and Integrated Digital Studio, with beginners and sophomore students (2017), were planned to have their activities developed in a digital environment, using geometric modeling as the main resource for the architectural design. The results obtained show maturity and autonomy of the students related to architectural designing and the use of digital resources.
keywords	Architectural design; Architectural design teaching; Geometric Modeling; CAAD
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1510
id	sigradi2018_1510
authors	Lafluf Cuevas, Marcos; Barber Sarasola, Gabriela; García Amen, Fernando
year	2018
title	Emerging ecosystems of information and city: Anglo digital repository
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1023-1030
summary	This paper focuses on the implementation of a digital repository and content management of the Museo de la Revolución Industrial, in Fray Bentos, as part of a project carried out in the context of the I+D project "La ciudad inteligente; un palimpsesto digital", currently under development in the Laboratory of Advanced Digital Visualization (Vidialab) of the Faculty of Architecture, Design and Urbanism (FADU). The project main theme is the emerging paradigm of Smart Cities with focus on the territory as an integral cultural landscape. The experience, implementation, processed involved and related topics, are described and analyzed theoretically, in the search of architectural and historical heritage dissemination.
keywords	Heritage; Smart City; TIC; Digital repository; Dissemination of heritage; Free software
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaaderis2023_45
id	ecaaderis2023_45
authors	Morton, David, Ahmed, Tarek MF and Humphery, Richard
year	2023
title	BIM and Teaching in Architecture: Current thinking and approaches
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 105–115
summary	Increasing use of BIM has represented a continuing shift in traditional assumptions on how we navigate the design process. BIM is affording the student the ability to gain a greater understanding of their design ideas via the exploration of scale, spatial organisation and structure, amongst many other design layers, in increasing levels of detail, at the same point in the design process. Architectural education is at a delayed tipping point where architectural students are increasingly looking towards BIM to streamline their design process drawn by the production of realistic visualisation, but with a lack of knowledge and skill in its application. With a lack of guidance and understanding around the application of BIM, the use of BIM in this manner overlooks the potential of BIM to construct and test virtual simulations of proposed schemes, to support design enquiry. A historical concern for the pedagogy constructed around the students’ design process is the application of methods and techniques that support the progression through the design process, (Ambrose, 2014; dash mei & Safari, 2018). This study examines the design process of architectural students and the interaction between analogue and digital methods used in design. These primary modes of communication, offer the opportunity to query the roles and rules of traditional architectural conventions around ‘problem finding’ and ‘problem solving’, challenging the ‘traditional’ design process examined by pioneers like Bruner (1966) and Schon (1987). These approaches are distilled from the findings of the study and presented as guidance to those teaching in architectural aBIMemia to align pedagogic goals to methods of abstraction in this new era of design education reconsidering digital methods in design.
keywords	BIM, BIM, Design Process, Architecture, Learning
series	eCAADe
email
last changed	2024/02/05 14:28

_id	sigradi2018_1671
id	sigradi2018_1671
authors	Brito, Michele; de Sá, Ana Isabel; Borges, Jéssica; Rena, Natacha
year	2018
title	IndAtlas - Technopolitic platform for urban investigation
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1305-1312
summary	This article presents the project of the urban research platform IndAtlas, currently in early development stage by UFMG’s Research Group Indisciplinar. Through the association of crowdsourcing tools, a spatial database and the production of visualizations of different types, it is intended to create a Web platform for collecting, analyzing and depicting information about processes of production and transformation of urban space. It is proposed that the phenomena (themes) investigated in the platform are approached mainly from four axes: 1) spatial / territorial; 2) temporal; 3) social; 4) communicational. To do this, we try to combine online collaborative maps with the production of dynamic timelines and visualizations of networks of social actors (graphs), connected with social networks and Wiki pages. The article will address the development of Indisciplinar’s working method, which guided the proposal of the platform, as well as the functional and technical aspects to be observed for its implementation, the proposed architecture and the importance of interoperability for the project. Finally, the inquiries derived from the first test experiment of an IndAtlas test prototype will be presented. The experiment took place in a workshop belonging to the Cidade Eletrônika 2018 Festival – an arts and technology event. The workshop was offered in January of the same year, and it proposed a collaborative cartography of the Santa Tereza neighborhood, in Belo Horizonte / MG – a traditional neighborhood of great importance for historical heritage, currently subject to great real estate pressure and the focus of a series of territorial disputes.
keywords	IndAtlas, Crowdsourcing, Urban Technopolitics,, Digital Cartographies,, Spatial Data.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1571
id	sigradi2018_1571
authors	de Mello Monteiro, Verner Max Liger; Alves Bezerra, José Rauryson; Paulino do Nascimento, Paulo Roberto; Ramalho dos Santos Júnior, Erisvaldo
year	2018
title	Mathematizing Niemeyer’s architecture through parametric modeling: evaluating the parables of the Pampulha Church
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 294-299
summary	This paper describes the mathematization process behind the parables of the Pampulha Church, one of the most iconic buildings designed by Oscar Niemeyer, in order to check how applicable was the use of analytic geometry in his architecture. To reach this, we factored the second degree equations presented on the building based on the parable height and width, then using parametric modeling to translate the formula into shape. As a result, the study intended to demonstrate how equations can be integrated into architecture, identifying how conic curves are being applied to the architectural geometry.
keywords	Parametric modeling; Pampulha church; Oscar Niemeyer; Analytic geometry
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1587
id	sigradi2018_1587
authors	Maia, Marcelo; Borges, Jéssica; Brito, Michele; de Sá, Ana Isabel
year	2018
title	Internet of Things Technology and Policy in Belo Horizonte Public Transportation System
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 568-573
summary	From a critical point of view regarding Smart Cities, this paper presents an overview of Brazilian policies concerning the application of Internet of Things (IoT) on public transportation systems, using as a case study the city of Belo Horizonte. We performed a critical analysis of its public transportation system considering the already installed IoT infrastructure, including mobile communication technology that uses distributed locative media among users. Our main focus was understanding its use, potential and political dimension, specially concerning terms of use and data distribution and sharing between users, public administration and private companies that compose the transportation system.
keywords	urban transportation system; technopolitics; internet of things; smart city; instant city
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_424
id	ecaade2018_424
authors	Barczik, Günter
year	2018
title	From Body Movement to Sculpture to Space - Employing Immersive Technologies to Design with the whole Body
doi	https://doi.org/10.52842/conf.ecaade.2018.2.781
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 781-788
summary	We present and discuss an experimental student design and research project that investigates how architectural design can be enhanced via immersive technologies. Specifically, by employing not a 2D interface for designers' thoughts, but a 3D interface and thereby activating the whole body instead of merely head and hands.
keywords	Virtual Reality; Design Tools; Design Concepts; Design Methods
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_197
id	ecaade2018_197
authors	Fuchkina, Ekaterina, Schneider, Sven, Bertel, Sven and Osintseva, Iuliia
year	2018
title	Design Space Exploration Framework - A modular approach to flexibly explore large sets of design variants of parametric models within a single environment
doi	https://doi.org/10.52842/conf.ecaade.2018.2.367
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 367-376
summary	Parametric modelling allows to relatively easily generate large sets of design variants (so called design space). Typically, a designer intuitively moves through this design space, resulting in one or several satisfying solutions. Due to the theoretically large number of variants that can be created with parametric models, obviously, there is a high probability that potentially good solutions could be missed, which is not at least because of human cognitive limitations. Consequently, it is necessary to develop a certain strategy to support designers in order to search for design solutions. Even though, various methods to systematically approach large data sets exist, the application of them in the design process is a special case, firstly, due to the existence of many non-specifiable and subjective dimensions (e.g. aesthetics) and secondly because of the multiple ways how designers actually search for solutions. This demands for a more flexible approach to design space exploration. This paper investigates how different methods can be combined to support the exploration of design spaces. Therefore, a conceptual framework with a modular architecture is proposed and its prototypical implementation is demonstrated.
keywords	Design Space Exploration; Parametric design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2018_1473
id	sigradi2018_1473
authors	Kimi Cogima, Camila; V. V. de Paiva, Pedro; Dezen-Kempter, Eloisa; G. De Carvalho, Marco Antonio
year	2018
title	Digital scanning and BIM modeling for modern architecture preservation: the Oscar Niemeyer’s Church of Saint Francis of Assisi
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 457-462
summary	The Building Information Modelling (BIM) technology enabled improvement in the design, construction and maintenance stages highly. In the field of existing buildings, including historical assets, this technology has not yet had the same impact. This paper presents a methodology to create an intelligent digital model for an outstanding building from modern architecture in Brazil using multiple reality-based technologies. The fusion of the different point cloud raw data generated a high-resolution Dense Surface Model (DSM), the base of an accurate and detailed parametric Model. This study demonstrated the potential of digital surveying, including low-cost sensors, and BIM for built heritage documentation.
keywords	Reality-based surveying; Point cloud; As-is model; Building Information Modelling; Modern Heritage
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_122
id	caadria2018_122
authors	Leung, Emily, Asher, Rob, Butler, Andrew, Doherty, Ben, Fabbri, Alessandra, Gardner, Nicole and Haeusler, M. Hank
year	2018
title	Redback BIM - Developing 'De-Localised' Open-Source Architecture-Centric Tools
doi	https://doi.org/10.52842/conf.caadria.2018.2.021
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 21-30
summary	Emerging technologies that use data have contributed to the success of communication all over the world. Social media and gaming industries have already taken advantage of the web to provide synchronous communication and updated information. Conversely, existing methods of communication within the AEC industry require multiple platforms, such as emails and file sharing services in conjunction with 3D Modelling software, to inform changes made by stakeholders, resulting in file duplication and limited accessibility to the latest version, while augmenting existing practice's inefficiency. As communication is critical to the success of a project and should be enhanced, Redback BIM promises to establish a workflow for a dynamic platform, while achieving similar results to that of a 3D modelling program hosted on the web. Using existing open-source web development software, multiple users will be able to collaboratively organise and synchronise changes made to the design scheme in real-time. Features such as this would enable more fluid communication between multiple stakeholders within the life of a project.
keywords	De-localised Workspaces; Web-based Software Platforms; Data; Open-source; Collaboration
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2018_180
id	caadria2018_180
authors	Mekawy, Mohammed and Petzold, Frank
year	2018
title	BIM-Based Model Checking in the Early Design Phases of Precast Concrete Structures
doi	https://doi.org/10.52842/conf.caadria.2018.2.071
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 71-80
summary	Designers often carry out their work in the early design stages with disregard to prefabrication requirements, leading to poorly thought out design decisions in terms of precast concrete planning efficiency. If precast expertise could be integrated early into design schemes, this would improve design efficiency, reduce errors and misalignments, and save time at every design iteration. The objective is not to replace precast domain experts, but to help architects make better-informed design decisions. This research is part of a wider investigation that aims to develop a rule-based expert system to support an automated review of precast concrete requirements in BIM models in the early design stages, proactively providing feedback for design decision support. This specific paper summarizes the theoretical part of the research and proposes a way to formalize precast expert knowledge as rule-sets in a tabular form that can be later programmed and integrated in a BIM platform for automated checking of BIM models.
keywords	Precast Concrete; Rule-based checking; BIM-based model checking; Expert system; Decision tables
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2018_284
id	caadria2018_284
authors	Mühlhaus, Michael, Jenney, Sarah Louise and Petzold, Frank
year	2018
title	Take a Look Through My Eyes: An Augmented Reality Planning Communication System
doi	https://doi.org/10.52842/conf.caadria.2018.1.379
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 379-388
summary	Participation and communication in urban planning, visualisation, spatial perception, and motivation through gamification are discussed and system requirements derived. An augmented reality multi-client communication prototype is described improving transparency and utilising local expertise in planning processes. The selection, processing and visualisation of planning data takes individual stakeholders knowledge and skill levels, cultural backgrounds, and interests into account to facilitate understanding through moderation and the ability to change perspective.
keywords	Augmented Reality; Gameification; Communication; Public Participation; Visualisation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2018_1426
id	sigradi2018_1426
authors	Nisenbaum, Marcio; Vilas Boas, Naylor; Ripper Kós, José
year	2018
title	Urban digital simulators as knowledge catalysts: a case study on the soundscape of Rio de Janeiro city center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1134-1141
summary	This paper discusses about urban digital simulators, focusing on soundscape representation aided by game engines. Digital modelling techniques have evolved and new approaches emerged, offering novel ways of experiencing the digital realm. Within soundscapes studies, the videogame media and the game design process offer interesting ways of dealing with sound phenomena, space and time. This paper describes a prototype, as part of an ongoing lab research, that simulates the soundscape of a specific site in Rio de Janeiro using game engine technology,
keywords	Simulator; Sound landscape; Soundscape; Video game
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaadesigradi2019_370
id	ecaadesigradi2019_370
authors	Sperling, David, Vizioli, Simone Helena Tanoue, Botasso, Gabriel Braulio, Tiberti, Mateus Segnini, Santana, Eduardo Felipe Zambom and Sígolo, Brianda de Oliveira Ordonho
year	2019
title	Crossing Timelines - Main research topics in the histories of eCAADe and SIGraDi
doi	https://doi.org/10.52842/conf.ecaade.2019.1.407
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 407-416
summary	Being in tune with the joint eCAADe and SIGraDi conference, this paper systematizes and analyzes data related to the set of papers presented in the history of the conferences of both societies. Which paths traced from eCAADe and SIGraDi brought us to the "architecture in the age of the fourth industrial revolution"? This paper describes a bibliometric study focused on eCCADe and SIGraDi papers from 2003 to 2018 retrieved from CumInCad by using an open source software developed by the team for this research. The most used keywords and most cited authors, cross-citations between societies and time series about this data were synthesized, recovering part of the histories of these societies. Some similarities and differences between them are pointed out allowing to understand their past for better drawing their future.
keywords	CAAD; History; Bibliometrics; Cumincad; eCAADe; SIGraDi
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2018_138
id	ecaade2018_138
authors	Abdulmawla, Abdulmalik, Schneider, Sven, Bielik, Martin and Koenig, Reinhard
year	2018
title	Integrated Data Analysis for Parametric Design Environment - mineR: a Grasshopper plugin based on R
doi	https://doi.org/10.52842/conf.ecaade.2018.2.319
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 319-326
summary	In this paper we introduce mineR- a tool that integrates statistical data analysis inside the parametric design environment Grasshopper. We first discuss how the integration of statistical data analysis would improve the parametric modelling workflow. Then we present the statistical programming language R. Thereafter, we show how mineR is built to facilitate the use of R in the context of parametric modelling. Using two example cases, we demonstrate the potential of implementing mineR in the context of urban design and analysis. Finally, we discuss the results and possible further developments.
keywords	Statistical Data Analysis; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1300
id	sigradi2018_1300
authors	Alves de Almeida, Marcela; de Souza Nogueira, Yasmim
year	2018
title	Parametricism as style: the relationship between methodology of scientific research programmes and parametric design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 17-22
summary	During the 1990s many architects, who dissociated from critical theory, were looking for new design methodologies that did not confine themselves as stylistic currents. One of these propractice movement is done by means of parametric design. Aiming to investigate the boundaries between methodology and style, this paper proposes to answer the question: does the parametric architecture constitute a new style, as Patrik Schumacher says? It reviews Heinrich Wölfflin concept of style in the contemporary context; it presents Imre Lakatos theory (methodology of scientific research programmes) and how Schumacher appropriates of it followed by a critical reflection on the limits of such appropriation.
keywords	Parametric design; Style
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1484
id	sigradi2018_1484
authors	Alves de Oliveira, Amanda Aline; Sakurai, Tatiana
year	2018
title	The transformations of the "Do-It-Yourself" culture and the context provided by digital manufacturing in furniture design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1258-1263
summary	This article seeks to deal with the evolution of the DIY culture during its most important periods for the history of furniture and confers great importance to the present reality that provides the constitution of these artifacts through digital manufacturing. Thus, issues such as the quality of what has been produced and even the relevance of design professionals of the culture of making in the digital era are treated.
keywords	DIY; Digital fabrication; Furniture; Fab Labs Livres SP
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: