Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 631

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_366
id	acadia18_366
authors	Baseta, Efilena; Bollinger, Klaus
year	2018
title	Construction System for Reversible Self-Formation of Grid Shells. Correspondence between physical and digital form
doi	https://doi.org/10.52842/conf.acadia.2018.366
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 366-375
summary	This paper presents a construction system which offers an efficient materialization method for double-curved gridshells. This results in an active-bending system of controlled deflections. The latter system embeds its construction manual into the geometry of its components. Thus it can be used as a self-formation process. The two presented gridshell structures are composed of geometry-induced, variable stiffness elements. The latter elements are able to form programmed shapes passively when gravitational loads are applied. Each element consists of two layers and a slip zone between them. The slip allows the element to be flexible when it is straight and increasingly stiffer while its curvature increases. The amplitude of the slip defines the final deformation of the element. As a result, non-uniform deformations can be obtained with uniform cross sections and loads. When the latter elements are used in grid configurations, self-formation of initially planar surfaces emerges. The presented system eliminates the need for electromechanical equipment since it relies on material properties and hierarchical geometrical configurations. Wood, as a flexible and strong material, has been used for the construction of the prototypes. The fabrication of the timber laths has been done via CNC industrial milling processes. The comparison between the initial digital design and the resulting geometry of the physical prototypes is reviewed in this paper. The aim is to inform the design and fabrication process with performance data extracted from the prototypes. Finally, the scalability of the system shows its potential for large-scale applications, such as transformable structures.
keywords	full paper, material & adaptive systems, flexible structures, digital fabrication, self-formation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2023_39
id	sigradi2023_39
authors	Borges, Marina, Karantino, Lucas and Gorges, Diego
year	2023
title	Walkability: Digital Parametric Process for Analyzing and Evaluating Walkability Criteria in Peripheral Central Regions of Belo Horizonte
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 397–408
summary	According to one of the Sustainable Development Goals (UN, 2018), it is important for cities to be inclusive, safe, resilient, and sustainable. Therefore, it is necessary to value pedestrians and consequently active mobility, giving priority to the concepts of the Transportation Oriented Development (TOD) methodology. Although the Master Plan (BELO HORIZONTE, 2019) proposes that areas located in regional centralities are enhancing active mobility, can residents actually benefit from these resources at a walkable distance to access basic services? Thus, the aim of this research is to utilize digital technologies to visualize, analyze, and assess pedestrians' access conditions to commerce and basic services, identifying areas lacking infrastructure. The goal is for the model to serve as a reference for the development of public policies. To achieve this, metadata was used for parametric modeling to study walkability in the peripheral region of the city of Belo Horizonte.
keywords	Walkability, Urban Data Analysis, Urban Design, Parametric Urbanism, Algorithmic Logic
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	ascaad2023_083
id	ascaad2023_083
authors	Borges, Marina; Karantino, Lucas; Gorges, Diego
year	2023
title	Walkability: Digital Parametric Process for Analyzing and Evaluating Walkability Criteria in Peripheral Central Regions of Belo Horizonte
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 293-304.
summary	According to one of the Sustainable Development Goals (UN, 2018), it is important for cities to be inclusive, safe, resilient, and sustainable. Therefore, it is necessary to prioritize pedestrians and promote active mobility, giving them priority and encouraging walking, as presented in the concepts of TOD (Transit-Oriented Development). Although the master plan suggests that areas located in the regional centrality of Belo Horizonte are enhancing active mobility, residents may still need to use individual or public transportation due to long distances when accessing basic services on foot. In peripheral areas of the city of Belo Horizonte, are there favorable walkability conditions for the residents? Thus, the aim of this research is to use digital technologies to investigate, through a parametric performative model, the quality of the existing routes, with a focus on the peripheral areas of the city. Based on the results obtained, it will be possible to conclude whether there are discrepancies between what is presented in the master plan and, ultimately, to identify potential solutions for the area based on metrics that qualify and enhance active mobility. These solutions may vary according to the specific needs of the location.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_001
id	ecaade2018_001
authors	Kepczynska-Walczak, A, Bialkowski, S (eds.)
year	2018
title	Computing for a better tomorrow, Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2018.2
source	Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, 860 p.
summary	The theme of the 36th eCAADe Conference is Computing for a better tomorrow. When we consider the aims of research activities, design efforts and mastering towards ideal solutions in the area of digital technologies in the built environment, such as CAD, CAM, CAE, BIM, FM, GIS, VR, AR and others, we may realise the actual reason for that is to make life better, healthier, prettier, happier, more sustainable and smarter. The usefulness of undertaken studies might be tested and proved by the noticeable shared approach of putting humans and their environments in a central position: man and the environment, nature and design, art and technology... Natural disasters and climate change, crime and terrorism, disabilities and society ageing - architects, designers and scientists active in the built environment domain are not able to eliminate all the risk, dangers and problems of contemporary world. On the other hand, they have social and moral responsibilities to address human needs and take up this multifaceted challenge. It involves a co-operation and, moreover, an interdisciplinary and user-oriented approach. The complexity of raised problems should not discourage us, on the contrary, it should stimulate activities towards living up to human dreams of a better and sustainable tomorrow. This calls for a revision of methods and tools applied in research, teaching and practice. Where are we? What are the milestones and roadmaps at the end of the second decade of the 21st century? Do we really take the most of the abundance of accumulated knowledge? Or we skip to explore another undiscovered domains? We invited academicians, researchers, professionals and students from all over the world to address the multifaceted notions of using computing in architectural and related domains for developing a better tomorrow. Approaches discussing the theme from the perspective of computer aided design education; design processes and methods; design tool developments; and novel design applications, as well as real world experiments and case studies were welcomed. In order to specifically address some of the questions above, we defined subthemes and organised specific sessions around these subthemes, during the conference as well as in the proceedings.
series	eCAADe
last changed	2022/06/07 07:49

_id	ecaade2018_000
id	ecaade2018_000
authors	Kepczynska-Walczak, A, Bialkowski, S (eds.)
year	2018
title	Computing for a better tomorrow, Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2018.1
source	Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, 858 p.
summary	The theme of the 36th eCAADe Conference is Computing for a better tomorrow. When we consider the aims of research activities, design efforts and mastering towards ideal solutions in the area of digital technologies in the built environment, such as CAD, CAM, CAE, BIM, FM, GIS, VR, AR and others, we may realise the actual reason for that is to make life better, healthier, prettier, happier, more sustainable and smarter. The usefulness of undertaken studies might be tested and proved by the noticeable shared approach of putting humans and their environments in a central position: man and the environment, nature and design, art and technology... Natural disasters and climate change, crime and terrorism, disabilities and society ageing - architects, designers and scientists active in the built environment domain are not able to eliminate all the risk, dangers and problems of contemporary world. On the other hand, they have social and moral responsibilities to address human needs and take up this multifaceted challenge. It involves a co-operation and, moreover, an interdisciplinary and user-oriented approach. The complexity of raised problems should not discourage us, on the contrary, it should stimulate activities towards living up to human dreams of a better and sustainable tomorrow. This calls for a revision of methods and tools applied in research, teaching and practice. Where are we? What are the milestones and roadmaps at the end of the second decade of the 21st century? Do we really take the most of the abundance of accumulated knowledge? Or we skip to explore another undiscovered domains? We invited academicians, researchers, professionals and students from all over the world to address the multifaceted notions of using computing in architectural and related domains for developing a better tomorrow. Approaches discussing the theme from the perspective of computer aided design education; design processes and methods; design tool developments; and novel design applications, as well as real world experiments and case studies were welcomed. In order to specifically address some of the questions above, we defined subthemes and organised specific sessions around these subthemes, during the conference as well as in the proceedings.
series	eCAADe
last changed	2022/06/07 07:49

_id	acadia20_164p
id	acadia20_164p
authors	Lange, Christian; Ratoi, Lidia; Co Lim, Dominic; Hu, Jason; Baker, David M.; Yu, Vriko; Thompson, Phil
year	2020
title	Reformative Coral Habitats
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 164-169
summary	Coral reefs are some of the most diverse ecologies in the marine world. They are the habitat to tens of thousands of different marine species. However, these wildlife environments are endangered across the globe. Recent research estimates that around 75 percent of the remaining coral reefs are currently under threat. In 2018 after a devastating storm, Hong Kong lost around 80% of its existing corals. Consequently, a team consisting of marine biologists and architects at The University of Hong Kong has developed a series of performative structures that have been deployed in the city's waters in July 2020, intending to aid new coral growth over the coming years. The project was commissioned by the Agriculture, Fisheries, and Conservation Department (AFCD) and is part of an ongoing active management measure for coral restoration in Hoi Ha Wan Marine Park in Hong Kong. The following objectives were defined as part of the design and fabrication research of the project. To develop a design strategy that builds on the concept of biomimicry to allow for complex spaces to occur that would provide attributes against the detachment of the inserted coral fragment, hence could enhance a diverse marine life specific to the context of the cities water conditions. To generate an efficient printing path that accommodates the specific morphological design criteria and ensures structural integrity and the functional aspects of the design. To develop an efficient fabrication process with a DIW 3D printing methodology that considers warping, shrinkage, and cracking in the clay material. The research team developed a method that combined an algorithmic design approach for the design of different geometries with a digital additive manufacturing process utilizing robotic 3D clay printing. The overall fabrication strategy for the complex and large pieces sought to ensure structural longevity, optimize production time, and tackle the involved double-sided printing method. Overall, 128 tiles were printed, covering roughly 40sqm of the seabed.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	acadia18_358
id	acadia18_358
authors	Lara Ditzel, Patricio; Balas, Leonard; Kalina, Olga; Vasey, Lauren; Bechert, Simon; Krieg ,Oliver David; Menges, Achim; Knippers, Jan
year	2018
title	Integrative Fabrication of Sandwich Shells. An integrative approach to design of robotically fabricated wood- based sandwich segmented shells
doi	https://doi.org/10.52842/conf.acadia.2018.358
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 358-365
summary	This paper presents the development of an integrative and adaptive robotic fabrication process for the production of wooden-based segmented shells of variable thickness. A material and construction process is presented whereby an industrial robot with a two-degree of freedom end-effector acts as active form-work, positioning flexible strips of plywood so they can be assembled into a structurally performative configuration and then filled with a polyurethane expandable foam. The resulting material system is a structurally performative and doubly curved sandwich composite which performs well in bending. This paper discusses the construction process and the material system, methods for structural analysis, an adaptive robotic fabrication process, as well as a computational design tool which integrates material constraints, robotic constraints, and structural performance. The resulting construction system expands the design possibilities for robotic fabrication in wood, particularly as a viable material system for implementation directly in an on-site condition.
keywords	work in progress, fabrication & robotics, materials & adaptive systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	caadria2018_008
id	caadria2018_008
authors	Crolla, Kristof, Cheng, Paul Hung Hon, Chan, Ding Yuen Shan, Chan, Arthur Ngo Foon and Lau, Darwin
year	2018
title	Inflatable Architecture Production with Cable-Driven Robots
doi	https://doi.org/10.52842/conf.caadria.2018.1.009
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 9-18
summary	This paper argues for alternative methods for the in-situ integration of robotics in architectural construction. Rather than promoting off-site pre-fabrication through industrial robot applications, it advocates for suspended, light-weight, cable-driven robots that allow flexible and safe onsite implementation. This paper uses the topic of large-scale inflatable architectural realisation as a study case to test the application of such a robot, here with a laser-cutter as end-effecter. This preliminary study covers the design, development, prototyping, and practical testing of an inherently scale-less cable-driven laser-cutter setup. This setup allows for the non-size specific cutting of inflatable structures' components which can be designed with common physics simulation engines. The developed robotic proof of concept forms the basis for several further and future study possibilities that merge the field of architectural design and implementation with mechanical and automation engineering.
keywords	Cable-driven robots; In-situ robotic fabrication; Large-scale fabrication; Inflatable architecture; Cross-disciplinarily
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia18_342
id	acadia18_342
authors	Wu, Kaicong; Kilian, Axel
year	2018
title	Robotic Equilibrium: Scaffold Free Arch Assemblies
doi	https://doi.org/10.52842/conf.acadia.2018.342
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 342-349
summary	Compression only arch structures are structurally highly efficient in force equilibrium. However, the material efficiency is offset by the traditional use of scaffolds to position materials and counter the out of equilibrium forces during assembly. We introduce a method of sequentially assembling compression only structures without a scaffold by robotically maintaining the compression equilibrium in every step. A two-arm collaborative robotic setup was used to maintain force equilibrium throughout arch assembly with the arms taking turns first hot wire cutting and placing blocks and providing a temporary scaffold to support the arch end point. To test the approach, a single catenary arch was generated using form-finding techniques and sequentially built from foam blocks. Moving forward we show the relationship between the joint valence (largest number of joined branches) of a multi-branched structure and the minimum number of robotic arms required for assembly using our initial technique. With only two robotic arms available, the technique was further developed to reduce the required number of arms per arch branch from two to one by attaching caterpillar tracks at the block supporting end effector. This allows a human to load the next block and the arm to move forward along the arch while maintaining equilibrium. Results show that robotic equilibrium scaffold free arch assembly is possible and can reduce scaffold waste and maintain the material efficiency of compression only structures. Future work will explore further applications of assistive robotics in construction replacing static construction aids with dynamic sensory feedback of equilibrium forces.
keywords	work in progress, collaborative sequential assembly, robotic equilibrium, compression only structures, form finding
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	acadia18_276
id	acadia18_276
authors	Bilotti, Jeremy; Norman, Bennett; Rosenwasser, David; Leo Liu, Jingyang; Sabin, Jenny
year	2018
title	Robosense 2.0. Robotic sensing and architectural ceramic fabrication
doi	https://doi.org/10.52842/conf.acadia.2018.276
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 276-285
summary	Robosense 2.0: Robotic Sensing and Architectural Ceramic Fabrication demonstrates a generative design process based on collaboration between designers, robotic tools, advanced software, and nuanced material behavior. The project employs fabrication tools which are typically used in highly precise and predetermined applications, but uniquely thematizes the unpredictable aspects of these processes as applied to architectural component design. By integrating responsive sensing systems, this paper demonstrates real-time feedback loops which consider the spontaneous agency and intuition of the architect (or craftsperson) rather than the execution of static or predetermined designs. This paper includes new developments in robotics software for architectural design applications, ceramic-deposition 3D printing, sensing systems, materially-driven pattern design, and techniques with roots in the arts and crafts. Considering the increasing accessibility and advancement of 3D printing and robotic technologies, this project seeks to challenge the erasure of materiality: when mistakes or accidents caused by inconsistencies in natural material are avoided or intentionally hidden. Instead, the incorporation of material and user-input data yields designs which are imbued with more nuanced traces of making. This paper suggests the potential for architects and craftspeople to maintain a more direct and active relationship with the production of their designs.
keywords	full paper, fabrication & robotics, robotic production, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_249
id	ecaadesigradi2019_249
authors	Chiarella, Mauro, Gronda, Luciana and Veizaga, Martín
year	2019
title	RILAB - architectural envelopes - From spatial representation (generative algorithm) to geometric physical optimization (scientific modeling)
doi	https://doi.org/10.52842/conf.ecaade.2019.3.017
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 17-24
summary	Augmented graphical thinking operates by integrating algorithmic, heuristic, and manufacturing processes. The Representation and Ideation Laboratory (RILAB-2018) exercise begins with the application of a parametric definition developed by the team of teachers, allowing for the construction of structural systems by the means of the combination of segmental shells and bending-active. The main objetive is the construction of a scientific model of simulation for bending-active laminar structures has brought into reality trustworthy previews for architectural envelopes through the interaction of parametrized relational variables. This way we put designers in a strategic role for the building of the pre-analysis models, allowing more preciseness at the time of picking and defining materials, shapes, spaces and technologies and thus minimizing the decisions based solely in the definition of structural typological categories, local tradition or direct experience. The results verify that the strategic integration of models of geometric physical optimization and spatial representation greatly expand the capabilities in the construction of the complex system that operates in the act of projecting architecture.
keywords	architectural envelopes; augmented graphic thinking; geometric optimization; bending-active
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ijac201816204
id	ijac201816204
authors	Gengnagel, Christoph; Riccardo La Magna, Mette Ramsgaard Thomsen and Martin Tamke
year	2018
title	Shaping hybrids – Form finding of new material systems
source	International Journal of Architectural Computing vol. 16 - no. 2, 91-103
summary	Form-finding processes are an integral part of structural design. Because of their limitations, the classic approaches to finding a form – such as hanging models and the soap-film analogy – play only a minor role. The various possibilities of digital experimentation in the context of structural optimisation create new options for the designer generating forms, while enabling control over a wide variety of parameters. A complete mapping of the mechanical properties of a structure in a continuum mechanics model is possible but so are simplified modelling strategies which take into account only the most important properties of the structure, such as iteratively approximating to a solution via representations of kinematic states. Form finding is thus an extremely complex process, determined both by the freely selected parameters and by design decisions.
keywords	Bending active, form finding, hybrid structures, simulation, textile architecture
series	journal
email
last changed	2019/08/07 14:03

_id	ecaade2018_p02
id	ecaade2018_p02
authors	Kepczynska-Walczak, Anetta and Martens, Bob
year	2018
title	Digital Heritage - Special Panel Session
doi	https://doi.org/10.52842/conf.ecaade.2018.1.039
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-44
summary	According to eCAADe's mission, the exchange and collaboration within the area of computer aided architectural design education and research, while respecting the pedagogical approaches in the different schools and countries, can be regarded as a core activity. The current session follows up on the first Contextualised Digital Heritage Workshop (CDHW) held on the occasion of eCAADe 2016 in Oulu (D. di Mascio et.al.) This event was thought to represent the first of a series of future contextualized digital heritage workshops and hence, the name Oulu interchangeable with the name of any other city or place. The second CDHW took place in the framework of CAADRIA 2017 in Suzhou (D. di Mascio & M.A. Schnabel) and focussed on sharing and dissemination of heritage information and personal experiences, such as narratives.The primary objective for the 2018 digital heritage session is to engage participants in an active discussion, not the longer format presentation of prepared positions. The round table itself is limited to short opening statements so as to ensure time is allowed for viewpoints to be exchanged and for the conference attendees to join in on the issues discussed. The panel will review past practices with the potential for guiding future direction.
keywords	Digital technology; Built heritage; Virtual archeology
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia18_232
id	acadia18_232
authors	Kilian, Axel
year	2018
title	The Flexing Room Architectural Robot. An Actuated Active-Bending Robotic Structure using Human Feedback
doi	https://doi.org/10.52842/conf.acadia.2018.232
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 232-241
summary	Advances in autonomous control of object-scale robots, both anthropomorphic and vehicular, are posing new human–machine interface challenges. In architecture, very few examples of autonomous inhabitable robotic architecture exist. A number of factors likely contribute to this condition, among them the scale and cost of architectural adaptive systems, but on a more fundamental conceptual level also the questions of how architectural robots would communicate with their human inhabitants. The Flexing Room installation is a room-sized actuated active-bending skeleton structure. It uses rudimentary social feedback by counting people to inform its behavior in the form of actuated poses of the room enclosure. An operational full-scale prototype was constructed and tested. To operate it no geometric-based simulation was used; the only communication between computer and structure was in sending values for the air pressure settings and in gathering sensor feedback. The structure’s physical state was resolved through the embodied computation of its interconnected parts, and the people-counting sensor feedback influences its next action. Future work will explore the development of learning processes to improve the human–machine coexistence in space.
keywords	full paper, fabrication & robotics, non-production robotics, materials/adaptive systems, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ijac201816404
id	ijac201816404
authors	Kousoulas, Stavros
year	2018
title	Shattering the black box: Technicities of architectural manipulation
source	International Journal of Architectural Computing vol. 16 - no. 4, 295-305
summary	This article attempts to reverse a fallacy often met in architectural theories and practices: that of a supposed input which through processes of what one can broadly call translations generates a built output. The input–output fallacy produces an architectural black box that treats both architectural thinking and doing as a mere process of projecting, representing and annotating ‘properly’ what will later be executed. On the contrary, a manipulative account of architecture as an active process of ecological engineering will pave the way for not only reversing the fallacy but also towards a particular understanding of architectural practices: architectural technicities and their reticular, affective potentials. Drawing on the theories of Gilbert Simondon, André Leroi-Gourhan, Gilles Deleuze and Felix Guattari, I will examine how architecture can be genealogically approached as a reticular technicity which evolves by a reciprocal concretisation of its technical objects and a generalisation of its active practitioners: no longer the application of transcendental design rules, of symbolic deductions or statistical inductions but rather abductive heuristics of affective techniques; no input nor output but practices of sensorial amplification via material manipulation and vice versa.
keywords	Abduction, concretisation, Leroi-Gourhan, Simondon, technicity
series	journal
email
last changed	2019/08/07 14:04

_id	acadia21_70
id	acadia21_70
authors	McAndrew, Claire; Jaschke, Clara; Retsin, Gilles; Saey, Kevin; Claypool, Mollie; Parissi, Danaë
year	2021
title	House Block
doi	https://doi.org/10.52842/conf.acadia.2021.070
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 70-75.
summary	House Block was a temporary housing prototype in East London, UK from April to May 2021. The project constituted the most recent in a series of experiments developing Automated Architecture (AUAR) Labs’ discrete framework for housing production, one which repositions the architect as curator of a system and enables participants to engage with active agency. Recognizing that there is a knowledge gap to be addressed for this reconfiguration of practices to take form, this project centred on making automation and its potential for local communities tangible. This sits within broader calls advocating for a more material alignment of inclusive design with makers and 21st Century making in practice (see, for example, Luck 2018). House Block was designed and built using AUAR’s discrete housing system consisting of a kit of parts, known as Block Type A. Each block was CNC milled from a single sheet of plywood, assembled by hand, and then post-tensioned on site. Constructed from 270 identical blocks, there are no predefined geometric types or hierarchy between parts. The discrete enables an open-ended, adaptive system where each block can be used as a column, floor slab, wall, or stair—allowing for disconnection, reconfiguration, and reassembly (Retsin 2019). The democratisation of design and production that defines the discrete creates points for alternative value systems to enter, for critical realignments in architectural production.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ijac201816101
id	ijac201816101
authors	Nisztu, Maciejk and Pawe³ B. Myszkowsk
year	2018
title	Usability of contemporary tools for the computational design of architectural objects: Review, features evaluation and reflection
source	International Journal of Architectural Computing vol. 16 - no. 1, 58-84
summary	This article is an overview focused on functionality and usability of selected contemporary approaches for the computational floor plan generation of architectural objects. This article describes current solutions for generative architectural design and focuses on their usability from the point of view of architectural design practice. Recent research papers and prototypes, as well as the most important tools (selected computer-aided design and BIM software) for generative design from the architectural perspective, are described. The functionalities and level of usability of present-day software and prototypes are described. In addition, the descriptive review of the research prototypes architectural design outcomes is present. Furthermore, the survey among active architects regarding the usage of computational tools in the professional practice and possible guidelines for the development of such tools are present. This article summarises with the conclusion about the current state of generative floor plan design tools, the lack of fully functional and developed commercial tools of this type on the market and future directions for the development of generative floor plans tools.
keywords	Architectural design, case studies, computer-aided architectural design, optimisation in computer-aided architectural design, computer-aided architectural design applications
series	journal
email
last changed	2019/08/07 14:03

_id	sigradi2022_297
id	sigradi2022_297
authors	Roco, Miguel
year	2022
title	ePortfolio as a Techno-pedagogical Strategy for Networked Learning in the Architectural Design Studio
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 1075–1086
summary	This paper shows and describes the experience of the ePortfolio implementation in architectural training for promoting Networked Learning (NL). The aim was to analyze the potential of ePortfolio, as a techno-pedagogical strategy to develop and enhance connections and learning integrations among students who belong in the second year of the Architectural Design Studio. The research had a descriptive methodology with a mixed approach over fourteen cohorts of the same training cycle across the years 2012 to 2018, considering a total of 336 students. The results reveal that ePortfolio, conceived inside the techno-pedagogical model, articulates a set of learning connections between students and learning situations and promotes the construction of an active collaboration net, which evidence NL development in the formative process.
keywords	ePortfolio, Networked Learning, ICT, Architectural Teaching, Techno-pedagogy
series	SIGraDi
email
last changed	2023/05/16 16:57

_id	acadia18_444
id	acadia18_444
authors	Sabin, Jenny; Pranger, Dillon; Binkley, Clayton; Strobel, Kristen; Liu, Jingyang (Leo)
year	2018
title	Lumen
doi	https://doi.org/10.52842/conf.acadia.2018.444
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 444-455
summary	This paper documents the computational design methods, digital fabrication strategies, and generative design process for Lumen, winner of MoMA & MoMA PS1’s 2017 Young Architects Program. The project was installed in the courtyard at MoMA PS1 in Long Island City, New York, during the summer of 2017. Two lightweight 3D digitally knitted fabric canopy structures composed of responsive tubular and cellular components employ recycled textiles, photo-luminescent and solar active yarns that absorb and store UV energy, change color, and emit light. This environment offers spaces of respite, exchange, and engagement as a 150 x 75-foot misting system responds to visitors’ proximity, activating fabric stalactites that produce a refreshing micro-climate. Families of robotically prototyped and woven recycled spool chairs provide seating throughout the courtyard. The canopies are digitally fabricated with over 1,000,000 yards of high tech responsive yarn and are supported by three 40+ foot tensegrity towers and the surrounding matrix of courtyard walls. Material responses to sunlight as well as physical participation are integral parts of our exploratory approach to the 2017 YAP brief. The project is mathematically generated through form-finding simulations informed by the sun, site, materials, program, and the material morphology of knitted cellular components. Resisting a biomimetic approach, Lumen employs an analogic design process where complex material behavior and processes are integrated with personal engagement and diverse programs. The comprehensive installation was designed by Jenny Sabin Studio and fabricated by Shima Seiki WHOLEGARMENT, Jacobsson Carruthers, and Dazian with structural engineering by Arup and lighting by Focus Lighting.
keywords	full paper, materials & adaptive systems, digital fabrication, flexible structures, performance + simulation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

For more results click below: