Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 618

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2018_245
id	caadria2018_245
authors	Chowdhury, Shuva and Schnabel, Marc Aurel
year	2018
title	An Algorithmic Methodology to Predict Urban Form - An Instrument for Urban Design
doi	https://doi.org/10.52842/conf.caadria.2018.2.401
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 401-410
summary	We question the recent practices of conventional and participatory urban design approaches and offer a middle approach by exploring computational design tools in the design system. On the one hand, the top-down urban planning approaches investigate urban form as a holistic matter which only can be calibrated by urban professionals. These approaches are not able to offer enough information to the end users to predict the urban form. On the other hand, the bottom-up urban design approaches cannot visualise predicted urban scenarios, and most often the design decisions stay as general assumptions. We developed and tested a parametric design platform combines both approaches where all the stakeholders can participate and visualise multiple urban scenarios in real-time feedback. Parametric design along with CIM modelling system has influenced urban designers for a new endeavour in urban design. This paper presents a methodology to generate and visualise urban form. We present a novel decision-making platform that combines city level and local neighbourhood data to aid participatory urban design decisions. The platform allows for stakeholder collaboration and engagement in complex urban design processes.
keywords	knowledge-based system; algorithmic methodology ; design decision tool; urban form;
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_336
id	ecaade2018_336
authors	Ena, Valeria
year	2018
title	De-coding Rio de Janeiro's Favelas - Shape grammar application as a contribution to the debate over the regularisation of favelas. The case of Parque Royal.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.429
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 429-438
summary	This study constitutes the first step of a broader PhD project, which aims to build a bridge between the architectural and the juridical examination of the typicality of low-income settlements within the city of Rio de Janeiro, the favelas. The purpose is to define a rule-based typological analysis to ease the process of evaluating the typicality of favelas and the possible, desirable form of its regularisation. This objective strives to equip all the actors involved in the debate with an analytical device able to represent the socially acknowledged, yet unofficial, rules that have been moulding favelas so far. By this means, this study tests shape grammar as a methodology for approaching this interdisciplinary issue. A shape grammar for a first case study, Parque Royal favela, located in the Governor Island, is presented. As preliminary results of the research, the paper encompasses the three early stages of construction of the case study: invasion, expansion and consolidation.
keywords	favelas (slums); urban regularisation; Rio de Janeiro; shape grammar; typology; master plan implementation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1508
id	sigradi2018_1508
authors	Akta?, Begüm; Birgül Çolako?lu, M.
year	2018
title	Systematic approach to design builds for freeform façade: AFA Cultural Center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 176-182
summary	The design and construction of the complex, irregularly shaped, and curvilinear building forms are also known as freeform architecture, have gained an interest form architects and engineers. This paper presents how freeform façade designs are defined with its curvilinear geometric characteristics and the systematic approach that is used to design and implement them. The proposed method incorporates product design and integral façade construction approach at AFA Cultural Center freeform façade implementation. Therefore, the paper aims to improve the viability of the proposed method and decreasing the gap between the other disciplines and architects in a systematic way without losing the creativity of the architects.
keywords	Parametric modeling; Systematic approach; Design thinking; System thinking; Freeform façade design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_130
id	ecaade2018_130
authors	Carl, Timo, Stepper, Frank and Schein, Markus
year	2018
title	Solar Spline - Expanding on traditional sun-sail typologies and Frei Otto´s lightweight approach with the help of computational design procedures
doi	https://doi.org/10.52842/conf.ecaade.2018.1.149
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 149-156
summary	This paper presents the design and production processes of a real world organic photovoltaic lightweight installation realized at the University and School of Art, Kassel. It revisits thereby, Frei Otto´s lightweight principles to establish design criteria. Furthermore, we present the possibilities of computational procedures for the design of contemporary lightweight structures within a speculative design setting. Last, we illustrate the benefits of these tools for the design of lightweight structures and the role they played in re-conceptualizing traditional sun-sail typologies within an interdisciplinary student team.
keywords	Lightweight Structures; Form-Finding; Computational Design; Interdisciplinary Collaboration
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1383
id	sigradi2018_1383
authors	Correia Fernandes, Gabriela; Bertola Duarte, Rovenir; Ferreira de Oliveira, Beatriz; Medri Striquer Souza, Giovana
year	2018
title	Towards a democratic approach on public lighting: remote systems based on Metadesign
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 60-67
summary	This research explores Metadesign(Giaccardi, 2003)as an innovative framework on the design of urban lighting systems. We hypothesize that a system based on this mode of design can bring breakthroughs that could cope with ill-defined problems in urban lighting design. Therefore, the aim is to propose alighting system in support of participation through interaction at use time. In this sense, by comprehending lighting infrastructures as sociotechnical environments, we believe Metadesign could cope with emergent needs arising in the context of personally meaningful activities andcould empower users to engage actively in their systems development and evolution.
keywords	Metadesign; Participation at use time; Sociotechnical systems; Urban lighting design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_398
id	ecaadesigradi2019_398
authors	Fink, Theresa and Koenig, Reinhard
year	2019
title	Integrated Parametric Urban Design in Grasshopper / Rhinoceros 3D - Demonstrated on a Master Plan in Vienna
doi	https://doi.org/10.52842/conf.ecaade.2019.3.313
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 313-322
summary	By 2050 an estimated 70 percent of the world's population will live in megacities with more than 10 million citizens (Renner 2018). This growth calls for new target-oriented, interdisciplinary methods in urban planning and design in cities to meet sustainable development targets. In response, this paper exemplifies an integrated urban design process on a master plan project in Vienna. The objective is to investigate the potential towards a holistic, digital, urban design process aimed at the development of a practical methodology for future designs. The presented urban design process includes analyses and simulation tools within Rhinoceros 3D and its plug-in Grasshopper as quality-enhancing mediums that facilitate the creative approaches in the course of the project. The increase in efficiency and variety of design variants shows a promising future for the practical suitability of this approach.
keywords	urban design; parametric modeling; urban simulation; design evaluation; environmental performance
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	ecaade2018_176
id	ecaade2018_176
authors	Fisher-Gewirtzman, Dafna and Polak, Nir
year	2018
title	Integrating Crowdsourcing & Gamification in an Automatic Architectural Synthesis Process
doi	https://doi.org/10.52842/conf.ecaade.2018.1.439
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 439-444
summary	This work covers the methodological approach that is used to gather information from the wisdom of crowd, to be utilized in a machine learning process for the automatic generation of minimal apartment units. The flexibility in the synthesis process enables the generation of apartment units that seem to be random and some are unsuitable for dwelling. Thus, the synthesis process is required to classify units based on their suitability. The classification is deduced from opinions of human participants on previously generated units. As the definition of "suitability" may be subjective, this work offers a crowdsourcing method in order to reach a large number of participants, that as a whole would allow to produce an objective classification. Gaming elements have been adopted to make the crowdsourcing process more intuitive and inviting for external participants.
keywords	crowdsourcing and gamification; urban density; optimization; automated architecture synthesis; minimum apartments; visual openness
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia18_98
id	acadia18_98
authors	Fox, Michael; Schulitz, Marc; Gershfeld, Mikhail; Cohen, Marc
year	2018
title	Full Integration: Closing the Gap on Technology Readiness
doi	https://doi.org/10.52842/conf.acadia.2018.098
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 98-107
summary	This paper discusses the authors’ experiences and lessons learned through designing and constructing small- and large-scale robotic prototypes and the fully integrated use of VR and AR for design. Also of focus here are the methodological tools utilized to implement this student-led research in an interdisciplinary educational environment, as well as the design explorations of Mars habitation systems. Through the systems engineering approach, students will generate ideas that may or may not make it to the final design development stage, but may potentially be valuable to future real exploration habitats and mission architectures. The final prototype allows an assessment of the focus parameters, which are the vessels’ transformation capacities and layout adaption. The design objective of this project is to examine strategies for commonality between an interplanetary vehicle (IPV) and a Mars surface habitat. The presented design proposals address this challenge to create a common habitation system in both habitats so that crew members will be familiar with the layout, function, and location throughout the expedition. The design tools operate at the intersection of architectural layout design, mechanics, and structural design, and use origami folding techniques and structural form-finding concepts to generate shell action rigidity. In addition, the project develops a strategy for mobility and transformation of the surface habitat prior to its transformed configuration. The value here lies in understanding lessons from this strategy for both the design process as well as efficiency and optimization in design as a model for terrestrial design.
keywords	full paper, bim, flexible structures, performance + simulation, representation + perception, building technologies, vr/ar/mr
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2018_104
id	ecaade2018_104
authors	Gürsoy, Benay
year	2018
title	From Control to Uncertainty in 3D Printing with Clay
doi	https://doi.org/10.52842/conf.ecaade.2018.2.021
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 21-30
summary	The use of digital fabrication tools can extend beyond the seamless materialization of the digital model and can continuously inform design ideation through emerging material qualities. Exploring the implications of an approach to digital fabrication that is not based on imposed and rigorous formalisms but on unique and contextual ones constitutes the research agenda. Within this framework, the focus of this paper is on 3D printing with clay. Considering matter not as the static and passive outcome of digitally predetermined form, but as a design generator, a case study on both the materials and tools employed in 3D printing with clay is presented.
keywords	Digital fabrication; additive manufacturing; 3D printing with clay; material computing; uncertainty
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac201816102
id	ijac201816102
authors	Harmon, Brendan A.; Anna Petrasova, Vaclav Petras, Helena Mitasova and Ross Meentemeyer
year	2018
title	Tangible topographic modeling for landscape architects
source	International Journal of Architectural Computing vol. 16 - no. 1, 4-21
summary	We present Tangible Landscape—a technology for rapidly and intuitively designing landscapes informed by geospatial modeling, analysis, and simulation. It is a tangible interface powered by a geographic information system that gives three- dimensional spatial data an interactive, physical form so that users can naturally sense and shape it. Tangible Landscape couples a physical and a digital model of a landscape through a real-time cycle of physical manipulation, three-dimensional scanning, spatial computation, and projected feedback. Natural three-dimensional sketching and real-time analytical feedback should aid landscape architects in the design of high performance landscapes that account for physical and ecological processes. We conducted a series of studies to assess the effectiveness of tangible modeling for landscape architects. Landscape architecture students, academics, and professionals were given a series of fundamental landscape design tasks—topographic modeling, cut-and-fill analysis, and water flow modeling. We assessed their performance using qualitative and quantitative methods including interviews, raster statistics, morphometric analyses, and geospatial simulation. With tangible modeling, participants built more accurate models that better represented morphological features than they did with either digital or analog hand modeling. When tangibly modeling, they worked in a rapid, iterative process informed by real-time geospatial analytics and simulations. With the aid of real-time simulations, they were able to quickly understand and then manipulate how complex topography controls the flow of water.
keywords	Human–computer interaction, tangible interfaces, tangible interaction, landscape architecture, performance, geospatial modeling, topographic modeling, hydrological modeling
series	journal
email
last changed	2019/08/07 14:03

_id	caadria2018_161
id	caadria2018_161
authors	Huang, Xiaoran, White, Marcus and Burry, Mark
year	2018
title	Design Globally, Immerse Locally - A Synthetic Design Approach by Integrating Agent Based Modelling with Virtual Reality
doi	https://doi.org/10.52842/conf.caadria.2018.1.473
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 473-482
summary	The last three decades have witnessed the explosion of technology and its impact on the architecture discipline which has drastically changed the methods of design. New techniques such as Agent-based modeling (ABM) and Virtual Reality (VR) have been widely implemented in architectural and urban design domains, yet the potential integration between these two methods remains arguably unexploited. The investigation in this paper aims to probe the following questions: How can architects and urban designers be informed more comprehensively by melding ABM and VR techniques at the preliminary/conceptual design stage? Which platform is considered more appropriate to facilitate a user-friendly system and reduces the steep learning curve? And what are the potential benefits of this approach in architectural education, particularly for the design studio environment? With those questions, we proposed a prototype in Unity, a multi-platform development tool that originated from the game industry, to simulate and visualize pedestrian behaviors in urban environments with immersive design experience and tested it in a scenario-based case study. This approach has also been further tested in an architectural design studio, demonstrating its technical feasibility as well as the potential contributions to the pedagogy.
keywords	Agent based modelling; Virtual Reality; Urban Design
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2018_022
id	caadria2018_022
authors	Hymes, Connor and Klemmt, Christoph
year	2018
title	Discrete Swarm Logics
doi	https://doi.org/10.52842/conf.caadria.2018.1.133
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 133-142
summary	The logics of agent-based behaviors have found interest in architectural design for their possibility to generate self-organizing geometries. However, the resulting free-form geometries are usually complex and costly to construct as buildings. Recently architects have proposed discrete components to create a cost-effective computational designs. This research explores the possibilities of discretizing agent-based simulations to make their bottom-up behaviors and resulting geometries more easily usable for economic construction. Different types of discretization have been explored. The simulations have been evaluated as a design tool at scales from the urban to the detail. The outcomes at the larger scale provide design possibilities, but with little influence on construction costs. At the smaller scale, the geometric assemblies show good possibilities for an economic design and a feasible construction, by altering, but not compromising, the emergent self-organizing principles that guide the simulations.
keywords	discrete; swarm; agent; simulation
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2018_353
id	ecaade2018_353
authors	Juzwa, Nina and Krotowski, Tomasz
year	2018
title	Sketch - Computer - Imagination - Reflections on Architecture Education Methodology
doi	https://doi.org/10.52842/conf.ecaade.2018.1.583
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 583-588
summary	The article underlines the problem of introducing computer techniques into the education process in master degree studies in architecture. Following the consumer society, developing technologies, changing social values architecture education changed its continuous principle into two-level system. The system well known from other fields of education results in diversified level of knowledge between admitted students on master studies. This fact in together with large exercise groups and a relatively short time allocated with the project requires methodical approach in relationship between a student and a teacher. The article focuses on complexity of a design process within different stages. Special attention is placed to an early design phase of shaping an architecture form because it demands different ways of presentation including freehand sketching, physical modelling and digital modelling. These tools correspond to the subsequent three phases of the design process, starting with exploration of the idea and context, functional decisions and determining the aesthetics. In authors opinion, the first phase of teaching process held without the use of computer techniques led to a higher originality of the architecture concept and increased efficiency in design process.
keywords	sketch; computer ; architect's vision; shaping the architecture
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2018_315
id	ecaade2018_315
authors	Koehler, Daniel, Abo Saleh, Sheghaf, Li, Hua, Ye, Chuwei, Zhou, Yaonaijia and Navasaityte, Rasa
year	2018
title	Mereologies - Combinatorial Design and the Description of Urban Form.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.085
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 85-94
summary	This paper discusses the ability to apply machine learning to the combinatorial design-assembly at the scale of a building to urban form. Connecting the historical lines of discrete automata in computer science and formal studies in architecture this research contributes to the field of additive material assemblies, aggregative architecture and their possible upscaling to urban design. The following case studies are a preparation to apply deep-learning on the computational descriptions of urban form. Departing from the game Go as a testbed for the development of deep-learning applications, an equivalent platform can be designed for architectural assembly. By this, the form of a building is defined via the overlap between separate building parts. Building on part-relations, this research uses mereology as a term for a set of recursive assembly strategies, integrated into the design aspects of the building parts. The models developed by research by design are formally described and tested under a digital simulation environment. The shown case study shows the process of how to transform geometrical elements to architectural parts based merely on their compositional aspects either in horizontal or three-dimensional arrangements.
keywords	Urban Form; Discrete Automata ; Combinatorics; Part-Relations; Mereology; Aggregative Architecture
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_322
id	ecaade2018_322
authors	Koehler, Daniel, Galika, Anna, Bai, Junyi and Pu, Qiuru
year	2018
title	Blockerties - The Distributive Design of the Blockchain Technology and its Impact on Urban Form.
doi	https://doi.org/10.52842/conf.ecaade.2018.1.551
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 551-560
summary	This paper aims to link the blockchain technology with property issues and in extend architectural design decisions at the urban scale. In an urban design context, this paper investigates the new potentials of urban form connected to the application of the logic of the blockchain to urban design. With this, the article concentrates on the distributed way of sharing information, with no intent to focus on cryptography issues related to the blockchain. Transferring the blockchain's core concepts of data distribution through ledgers, to patterns of shared and private owned spaces it can lead to what we propose as polyphonic spaces, with overlapping uses. Urban realm, designed as a chain, initiates with the binary condition of private and shared but handles it as a way to interact, through nesting, its initial parts. We think that the blockchain theory is capable of challenging architecture by shifting the weight from individual elements of composition to compound entities (block) that incorporate all the information needed.Please write your abstract here by clicking this paragraph.
keywords	Blockchain; Urban Form; Combinatorics; Typology; Mereology; Aggregative Architecture
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaaderis2018_111
id	ecaaderis2018_111
authors	Kontovourkis, Odysseas and Tryfonos, George
year	2018
title	An integrated robotically-driven workflow for the development of elastic tensile structures in various scales
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 111-120
keywords	This paper presents an ongoing work towards the development of an integrated robotically-driven workflow that can be used for the design, development and subsequent fabrication of small-to large-scale elastic tensile mesh structures. This approach involves digital form-finding and optimization, driven by robotic manufacturing principles and it aims to overcome the limitations of currently available tools, to work either in the design or the fabrication phase of the process. At the same time, it involves the fabrication of systems in several scales followed by respective analyses of results according to the specific type and diameter of the material used. Specifically, form-finding and optimization are responsible for controlling the pretension of the elastic threads, aiming to determine the final tensile mesh and to generate the additive robotic tool-path. In parallel, the type and diameter of the material involved, define the necessary changes of the end-effector tool, which is responsible to implement the process. Despite that design results can be in any scale, for study purposes an experimentation into a small-scale is conducted, to evaluate the suggested automated construction process in general and the end-effector mechanism in particular.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	acadia18_358
id	acadia18_358
authors	Lara Ditzel, Patricio; Balas, Leonard; Kalina, Olga; Vasey, Lauren; Bechert, Simon; Krieg ,Oliver David; Menges, Achim; Knippers, Jan
year	2018
title	Integrative Fabrication of Sandwich Shells. An integrative approach to design of robotically fabricated wood- based sandwich segmented shells
doi	https://doi.org/10.52842/conf.acadia.2018.358
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 358-365
summary	This paper presents the development of an integrative and adaptive robotic fabrication process for the production of wooden-based segmented shells of variable thickness. A material and construction process is presented whereby an industrial robot with a two-degree of freedom end-effector acts as active form-work, positioning flexible strips of plywood so they can be assembled into a structurally performative configuration and then filled with a polyurethane expandable foam. The resulting material system is a structurally performative and doubly curved sandwich composite which performs well in bending. This paper discusses the construction process and the material system, methods for structural analysis, an adaptive robotic fabrication process, as well as a computational design tool which integrates material constraints, robotic constraints, and structural performance. The resulting construction system expands the design possibilities for robotic fabrication in wood, particularly as a viable material system for implementation directly in an on-site condition.
keywords	work in progress, fabrication & robotics, materials & adaptive systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

For more results click below: