Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia18_424
id	acadia18_424
authors	Bucklin, Oliver; Drexler, Hans; Krieg, Oliver David; Menges, Achim
year	2018
title	Integrated Solid Timber. A multi-requisite system for the computational design,fabrication, and construction of versatile building envelopes
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 424-433
doi	https://doi.org/10.52842/conf.acadia.2018.424
summary	The paper presents the development of a building system made from solid timber that fulfils the requirements of modern building skins while expanding the design possibilities through innovation in computational design and digital fabrication. Multiple strategies are employed to develop a versatile construction system that generates structure, enclosure and insulation while enabling a broad design space for contemporary architectural expression. The basic construction unit augments the comparatively high insulation values of solid timber by cutting longitudinal slits into beams, generating air chambers that further inhibit thermal conductivity. These units are further enhanced through a joinery system that uses advanced parametric modeling and computerized control to augment traditional joinery techniques. Prototypes of the system are tested at a building component level with digital models and physical laboratory tests. It is further evaluated in a demonstrator building to test development and further refine design, fabrication and assembly methods. Results are integrated into proposals for new methods of implementation. The results of the research thus far demonstrate the validity of the strategy, and continuing research will improve its viability as a building system.
keywords	full paper, materials and adaptive systems, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_188
id	ecaade2018_188
authors	Coppens, Adrien, Mens, Tom and Gallas, Mohamed-Anis
year	2018
title	Parametric Modelling Within Immersive Environments - Building a Bridge Between Existing Tools and Virtual Reality Headsets
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 711-716
doi	https://doi.org/10.52842/conf.ecaade.2018.2.711
summary	Even though architectural modelling radically evolved over the course of its history, the current integration of Augmented Reality (AR) and Virtual Reality (VR) components in the corresponding design tasks is mostly limited to enhancing visualisation. Little to none of these tools attempt to tackle the challenge of modelling within immersive environments, that calls for new input modalities in order to move away from the traditional mouse and keyboard combination. In fact, relying on 2D devices for 3D manipulations does not seem to be effective as it does not offer the same degrees of freedom. We therefore present a solution that brings VR modelling capabilities to Grasshopper, a popular parametric design tool. Together with its associated proof-of-concept application, our extension offers a glimpse at new perspectives in that field. By taking advantage of them, one can edit geometries with real-time feedback on the generated models, without ever leaving the virtual environment. The distinctive characteristics of VR applications provide a range of benefits without obstructing design activities. The designer can indeed experience the architectural models at full scale from a realistic point-of-view and truly feels immersed right next to them.
keywords	Computer-aided Design; Parametric modelling; Virtual Reality; Architectural modelling; Human-Computer Interaction
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia18_336
id	acadia18_336
authors	Forren, James; Nicholas, Claire
year	2018
title	Lap, Twist, Knot. Intentionality in digital-analogue making environments
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 336-341
doi	https://doi.org/10.52842/conf.acadia.2018.336
summary	This paper discusses a theoretical approach and method of making in computational design and construction. The project examines digital and analogue building practices through a social anthropological and STS lens to better understand the use of technology in complex making environments. We position this with respect to contemporary investigations of materials in architecture which use physical and virtual prototyping and collaborative building. Our investigation extends this work by parsing complex making through ethnographic analysis. In doing so we seek to recalibrate computational design methods which privilege rote execution of digital form. This inquiry challenges ideas of agency and intention as ‘enabled’ by new technologies or materials. Rather, we investigate the troubling (as well as extension) of explicit designer intentions by the tacit intentions of technologies. Our approach is a trans-disciplinary investigation synthesizing architectural making and ethnographic analysis. We draw on humanistic and social science theories which examine activities of human-technology exchange and architectural practices of algorithmic design and fabrication. We investigate experimental design processes through prototyping architectural components and assemblies. These activities are examined by collecting data on human-technology interactions through field notes, journals, sketches, and video recordings. Our goal is to foster (and acknowledge) more complex, socially constructed methods of design and fabrication. This work in progress, using a cement composite fabric, is a preliminary study for a larger project looking at complex making in coordination with public engagement.
keywords	work in progress, illusory dichotomies, design theory & history, materials/adaptive systems, collaboration, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	caadria2018_302
id	caadria2018_302
authors	Lee, Alric, Tei, Hirokazu and Hotta, Kensuke
year	2018
title	Body-Borne Assistive Robots for Human-Dependent Precision Construction - The Compensation of Human Imprecision in Navigating 3-Dimensional Space with a Stand-Alone, Adaptive Robotic System
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2018.1.545
summary	The rapid growth of complex contemporary architecture design, contributed by the advance in parametric CAD/CAM software, is accompanied by challenges in the production process; it demands both highly trained workers and technical equipments. This paper reviews current technologies in robotics-aided construction and wearable computers for generic purposes, and proposes the design of a robotic device for construction guidance. It guides the user, the worker, through the assembly process of precision modular constructions, by providing procedural mechanical or haptic assistance in the 3-dimensional positioning of building components. The device is designed to be wearable, portable, and operable as a completely stand-alone system that requires no external infrastructure. A prototype of the device is tested with a mock-up masonry construction experiment, the result of which is reported in this paper, along with discussion for future improvement and application opportunities within the context of highly developed, condensed Japanese urban environments. A greater objective of this paper is to bridge current studies in Human-Computer Interaction (HCI) and digital fabrication in architecture and promote the potentials of human workers in future construction scenes.
keywords	digital fabrication; human-computer interaction; 3d positioning; wearable robotics; guided construction
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia19_392
id	acadia19_392
authors	Steinfeld, Kyle
year	2019
title	GAN Loci
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 392-403
doi	https://doi.org/10.52842/conf.acadia.2019.392
summary	This project applies techniques in machine learning, specifically generative adversarial networks (or GANs), to produce synthetic images intended to capture the predominant visual properties of urban places. We propose that imaging cities in this manner represents the first computational approach to documenting the Genius Loci of a city (Norberg-Schulz, 1980), which is understood to include those forms, textures, colors, and qualities of light that exemplify a particular urban location and that set it apart from similar places. Presented here are methods for the collection of urban image data, for the necessary processing and formatting of this data, and for the training of two known computational statistical models (StyleGAN (Karras et al., 2018) and Pix2Pix (Isola et al., 2016)) that identify visual patterns distinct to a given site and that reproduce these patterns to generate new images. These methods have been applied to image nine distinct urban contexts across six cities in the US and Europe, the results of which are presented here. While the product of this work is not a tool for the design of cities or building forms, but rather a method for the synthetic imaging of existing places, we nevertheless seek to situate the work in terms of computer-assisted design (CAD). In this regard, the project is demonstrative of a new approach to CAD tools. In contrast with existing tools that seek to capture the explicit intention of their user (Aish, Glynn, Sheil 2017), in applying computational statistical methods to the production of images that speak to the implicit qualities that constitute a place, this project demonstrates the unique advantages offered by such methods in capturing and expressing the tacit.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia18_88
id	acadia18_88
authors	Jahn, Gwyllim; Newnham, Cameron; Beanland, Matthew
year	2018
title	Making in Mixed Reality. Holographic design, fabrication, assembly and analysis of woven steel structures
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 88-97
doi	https://doi.org/10.52842/conf.acadia.2018.088
summary	The construction industry’s reliance on two-dimensional documentation results in inefficiency, inconsistency, waste, human error, and increased cost, and limits architectural experimentation with novel form, structure, material or fabrication approaches. We describe a software platform that enables designers to create interactive holographic instructions that translate design models into intelligent processes rather than static drawings. A prototypical project to design and construct a pavilion from bent mild steel tube illustrates the use of this software to develop applications assisting with the design, fabrication, assembly and analysis of the structure. We further demonstrate that fabrication within mixed reality environments can enable unskilled construction teams to assemble complex structures in short time frames and with minimal errors, and outline possibilities for further improvements.
keywords	full paper, vr/ar/mr, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
doi	https://doi.org/10.52842/conf.acadia.2018.394
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1508
id	sigradi2018_1508
authors	Akta?, Begüm; Birgül Çolako?lu, M.
year	2018
title	Systematic approach to design builds for freeform façade: AFA Cultural Center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 176-182
summary	The design and construction of the complex, irregularly shaped, and curvilinear building forms are also known as freeform architecture, have gained an interest form architects and engineers. This paper presents how freeform façade designs are defined with its curvilinear geometric characteristics and the systematic approach that is used to design and implement them. The proposed method incorporates product design and integral façade construction approach at AFA Cultural Center freeform façade implementation. Therefore, the paper aims to improve the viability of the proposed method and decreasing the gap between the other disciplines and architects in a systematic way without losing the creativity of the architects.
keywords	Parametric modeling; Systematic approach; Design thinking; System thinking; Freeform façade design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
doi	https://doi.org/10.52842/conf.acadia.2018.312
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_227
id	ecaade2018_227
authors	Chatzitsakyris, Panagiotis
year	2018
title	EventMode - A new computational design tool for integrating human activity data within the architectural design workflow
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 649-656
doi	https://doi.org/10.52842/conf.ecaade.2018.1.649
summary	Architectural designers are currently depending on a multitude of elaborate computational tools in order to explore, manipulate and visualize the geometric form of their building projects. However, if architecture can be perceived as the manipulation of geometric form in direct relation to human activities and events that take place inside it, then it is evident that such design parameters are not sufficiently represented in the currently available modeling software. Would it be possible to introduce the human activity element in the aforementioned computational tools in a way that informs the design process and improves the final building product? This paper attempts to answer this question by introducing a new experimental design tool that enables the creation of parametric human activity envelopes within three-dimensional digital models. The novel approach is that this tool enables the parametric interaction of these components with the actual building geometry and generates novel visual and data representations of the 3D model. The goal is to improve the decision-making process of architects as well as their clients by enabling them to evaluate and iterate their designs based not only on the building's form but also on the human spatial events that take place inside it. A prototype implementation demonstrates the tool's practical application through three design examples.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2018_292
id	caadria2018_292
authors	Eid Mohamed, Basem, ElKaftangui, Mohamed and Zureikat, Rana
year	2018
title	{In}Formed Panels - Towards Rethinking the Precast Concrete Industry in the UAE
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 287-296
doi	https://doi.org/10.52842/conf.caadria.2018.1.287
summary	The convergence of digital design and fabrication technologies have offered architects and designers the means by which to develop customized architectural artifacts, ones that goes beyond the standards of "one size fits all". Such applications have been applied extensively in various architectural practices, and specifically in the realm of industrialized building production, given that they present a suitable model. Although unrecognized within standard precast concrete production, current research acknowledges the need for advanced computer applications for shifting the industry into a digitized process. This paper represent a critical phase of an ongoing research endeavor that aims at rethinking the precast concrete production in the UAE, and MENA region for housing typologies. The project explores possibilities of a new protocol that is focused from design to production, relying on performative design strategies, and possible optimized for large format 3D printing of concrete elements. The aim is to develop an integrated façade panels system that is tailored for design and production; an approach that goes beyond current industry practices.
keywords	Precast Concrete; Industrialized Construction; Evolutionary Design; Optimization
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia23_v1_34
id	acadia23_v1_34
authors	Gascon Alvarez, Eduardo; Curth, Alexander (Sandy); Feickert, Kiley; Martinez Schulte, Dinorah; Mueller, Caitlin; Ismail, Mohamed
year	2023
title	Algorithmic Design for Low-Carbon, Low-Cost Housing Construction in Mexico
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 34-38.
summary	Mexico is one of the most urbanized countries in the Global South, and simultaneously faces a rapidly increasing population and a deluge of inadequate housing (URBANET 2019). In 2016, it was estimated that 40 percent of all private residences in Mexico were considered inadequate by UN-Habitat (UN-Habitat 2018). As informal housing constitutes over half of all Mexican housing construction, the most vulnerable groups of the population are particularly impacted. Therefore, there is a serious need to innovate in the area of low-cost building construction for housing in Mexico. This research explores how shape-optimized concrete and earth construction could help provide adequate housing without jeopardizing the country’s commitment to sustainability.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2018_w14
id	ecaade2018_w14
authors	Karóczkai, Ákos
year	2018
title	Parametric BIM Models in ARCHICAD - The Grasshopper - ARCHICAD Live Connection
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 63-64
doi	https://doi.org/10.52842/conf.ecaade.2018.1.063
summary	Parametric modelling is a very trending topic in the Architecture Engineering and Construction industry. There is an ever-growing challenge in the industry about how it is possible to document freeform and very design-oriented projects (created in Rhinoceros) in BIM. The ultimate goal of architectural and design projects is to be able to realize the building based on the 2D documentation. Currently Rhinoceros and Grasshopper are the industry-leading algorithmic solutions in the AEC industry. To complement such workflows, GRAPHISOFT developed a live connection between Grasshopper and ARCHICAD in order to generate BIM models, directly from the Visual Programming Interface (Grasshopper) and bridge the gap between the freeform, conceptual- and the BIM worlds.
keywords	Parametric; BIM; ARCHICAD
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2018_025
id	caadria2018_025
authors	Khoo, Chin Koi, Wang, Rui, Globa, Anastasia and Moloney, Jules
year	2018
title	Prototyping a Human-Building Interface with Multiple Mobile Robots
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 525-534
doi	https://doi.org/10.52842/conf.caadria.2018.1.525
summary	Recent advances in miniature mobile robotic research have generated possibilities and potentials in a range of fields such as the military, rescue operations, logistics and education. Within architecture, especially in responsive architecture and architectural interface disciplines, there has been minimal uptake of this technology, and so its full potential and implications have not been fully explored. In this paper, we propose a design exploration of a human-building interface (HBI) with multiple mobile robots serving as 'physical pixels', which investigates the latent possibilities of public interactive displays and media screens, potentially provoking interaction with existing built environments. The outcomes of this paper include an early-stage design study of an HBI prototype, PixelFace, which has been developed with multiple spherical mobile robots and an existing building structure. An early physical implementation of the HBI as an interactive public display with real-time physical movement that encourages playful interaction is also included.
keywords	Human-Computer Interaction; Human-Building Interface; Mobile Robots; Responsive Architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2018_258
id	ecaade2018_258
authors	Kim, Jingoog, Maher, Mary Lou, Gero, John and Sauda, Eric
year	2018
title	Metaphor - A tool for designing the next generation of human-building interaction
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 149-158
doi	https://doi.org/10.52842/conf.ecaade.2018.2.149
summary	Well known metaphors play an explanatory role in human-computer interaction (HCI) and support users in understanding an unfamiliar object with references to a familiar object, for example the desktop metaphor. Metaphors can also support designers in forming and exploring new concepts during the process of designing. We present metaphors that establish user expectations and provide guidance for new design concepts while integrating interactive technology in buildings to enable human-building interaction (HBI). HBI is a research area that studies how HCI research and practice provides opportunities for interactive buildings. Interactive experiences in architecture can be characterized by three metaphorical concepts: HBI as Device (user-centered view), HBI as Robot (building-centered view), and HBI as Friend (activity centered-view). These metaphors provide a tool for architects and HBI designers to explore designs that engage occupants' existing mental models from previous HCI experiences. We expand on each metaphor using analogical reasoning to define exploratory design spaces for HBI.
keywords	Human-Building Interaction; Metaphor; Human-Computer Interaction; Interactive Architecture
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2018_315
id	ecaade2018_315
authors	Koehler, Daniel, Abo Saleh, Sheghaf, Li, Hua, Ye, Chuwei, Zhou, Yaonaijia and Navasaityte, Rasa
year	2018
title	Mereologies - Combinatorial Design and the Description of Urban Form.
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 85-94
doi	https://doi.org/10.52842/conf.ecaade.2018.2.085
summary	This paper discusses the ability to apply machine learning to the combinatorial design-assembly at the scale of a building to urban form. Connecting the historical lines of discrete automata in computer science and formal studies in architecture this research contributes to the field of additive material assemblies, aggregative architecture and their possible upscaling to urban design. The following case studies are a preparation to apply deep-learning on the computational descriptions of urban form. Departing from the game Go as a testbed for the development of deep-learning applications, an equivalent platform can be designed for architectural assembly. By this, the form of a building is defined via the overlap between separate building parts. Building on part-relations, this research uses mereology as a term for a set of recursive assembly strategies, integrated into the design aspects of the building parts. The models developed by research by design are formally described and tested under a digital simulation environment. The shown case study shows the process of how to transform geometrical elements to architectural parts based merely on their compositional aspects either in horizontal or three-dimensional arrangements.
keywords	Urban Form; Discrete Automata ; Combinatorics; Part-Relations; Mereology; Aggregative Architecture
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaaderis2018_112
id	ecaaderis2018_112
authors	Kontovourkis, Odysseas and Konatzii, Panagiota
year	2018
title	Design-static analysis and environmental assessment investigation based on a kinetic formwork-driven by digital fabrication principles
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 131-140
keywords	This research focuses on design-static analysis and environmental assessment procedures that are based on the idea of a flexible kinetic formwork used as the automated mechanism for the production of bricks for porous wall structures. A key aspect of this investigation is the Life Cycle Assessment (LCA) analysis study that is applied in order to achieve, in parallel with the automated procedure, the sustainable potential of the products. For this purpose, the design and construction flexibility of the product is taken into account from the early design decision making stage by examining different sizes of bricks under fabrication including massive or porous ones in order to test their design and static performance, aiming to adapt their shape in multiple functional and environmental scenarios. In parallel, the LCA impact of the given design scenarios are taken into consideration, again from the early design phase, and include, among other objectives, material minimization, less environmental impact of building materials and less energy consumption based on the proposed digital fabrication technology. This is examined by comparing digital design and robotic automated results using three types of ecological materials.
series	eCAADe
email
last changed	2018/05/29 14:33

For more results click below: