Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 598

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
doi	https://doi.org/10.52842/conf.acadia.2018.394
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
doi	https://doi.org/10.52842/conf.acadia.2018.312
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2018_302
id	caadria2018_302
authors	Lee, Alric, Tei, Hirokazu and Hotta, Kensuke
year	2018
title	Body-Borne Assistive Robots for Human-Dependent Precision Construction - The Compensation of Human Imprecision in Navigating 3-Dimensional Space with a Stand-Alone, Adaptive Robotic System
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2018.1.545
summary	The rapid growth of complex contemporary architecture design, contributed by the advance in parametric CAD/CAM software, is accompanied by challenges in the production process; it demands both highly trained workers and technical equipments. This paper reviews current technologies in robotics-aided construction and wearable computers for generic purposes, and proposes the design of a robotic device for construction guidance. It guides the user, the worker, through the assembly process of precision modular constructions, by providing procedural mechanical or haptic assistance in the 3-dimensional positioning of building components. The device is designed to be wearable, portable, and operable as a completely stand-alone system that requires no external infrastructure. A prototype of the device is tested with a mock-up masonry construction experiment, the result of which is reported in this paper, along with discussion for future improvement and application opportunities within the context of highly developed, condensed Japanese urban environments. A greater objective of this paper is to bridge current studies in Human-Computer Interaction (HCI) and digital fabrication in architecture and promote the potentials of human workers in future construction scenes.
keywords	digital fabrication; human-computer interaction; 3d positioning; wearable robotics; guided construction
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia23_v3_71
id	acadia23_v3_71
authors	Vassigh, Shahin; Bogosian, Biayna
year	2023
title	Envisioning an Open Knowledge Network (OKN) for AEC Roboticists
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The construction industry faces numerous challenges related to productivity, sustainability, and meeting global demands (Hatoum and Nassereddine 2020; Carra et al. 2018; Barbosa, Woetzel, and Mischke 2017; Bock 2015; Linner 2013). In response, the automation of design and construction has emerged as a promising solution. In the past three decades, researchers and innovators in the Architecture, Engineering, and Construction (AEC) fields have made significant strides in automating various aspects of building construction, utilizing computational design and robotic fabrication processes (Dubor et al. 2019). However, synthesizing innovation in automation encounters several obstacles. First, there is a lack of an established venue for information sharing, making it difficult to build upon the knowledge of peers. First, the absence of a well-established platform for information sharing hinders the ability to effectively capitalize on the knowledge of peers. Consequently, much of the research remains isolated, impeding the rapid dissemination of knowledge within the field (Mahbub 2015). Second, the absence of a standardized and unified process for automating design and construction leads to the individual development of standards, workflows, and terminologies. This lack of standardization presents a significant obstacle to research and learning within the field. Lastly, insufficient training materials hinder the acquisition of skills necessary to effectively utilize automation. Traditional in-person robotics training is resource-intensive, expensive, and designed for specific platforms (Peterson et al. 2021; Thomas 2013).
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	ecaade2018_221
id	ecaade2018_221
authors	Veliz Reyes, Alejandro, Gomaa, Mohamed, Chatzivasileiadi, Aikaterini, Jabi, Wassim and Wardhana, Nicholas Mario
year	2018
title	Computing Craft - Early stage development of a robotically-supported 3D printing system for cob structures
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 791-800
doi	https://doi.org/10.52842/conf.ecaade.2018.1.791
summary	This paper focuses on an ongoing investigation exploring fabrication procedures and methodologies for robotically supported 3D printing utilising cob and other clay-based sustainable building materials, and is part of an ongoing collaboration between Cardiff University and the University of Plymouth. The methodology is that of a prototype development process within the framework of a feasibility studies call supported by the "Connected Everything: Industrial Systems in the Digital Age" EPSRC (Engineering and Physical Sciences Research Council) network. This project expects to not only reveal technological and design opportunities for 3D printed cob structures, but more broadly to engage with vernacular practice through digital means. As a result, this paper expects to contribute to the discipline by providing a framework engaging with digital practice as a way to bridge the knowledge gap between digitally-driven and vernacular modes of knowledge production, dissemination and representation.
keywords	cob construction; robotics; 3D printing; vernacular architecture
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
doi	https://doi.org/10.52842/conf.acadia.2018.216
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1508
id	sigradi2018_1508
authors	Akta?, Begüm; Birgül Çolako?lu, M.
year	2018
title	Systematic approach to design builds for freeform façade: AFA Cultural Center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 176-182
summary	The design and construction of the complex, irregularly shaped, and curvilinear building forms are also known as freeform architecture, have gained an interest form architects and engineers. This paper presents how freeform façade designs are defined with its curvilinear geometric characteristics and the systematic approach that is used to design and implement them. The proposed method incorporates product design and integral façade construction approach at AFA Cultural Center freeform façade implementation. Therefore, the paper aims to improve the viability of the proposed method and decreasing the gap between the other disciplines and architects in a systematic way without losing the creativity of the architects.
keywords	Parametric modeling; Systematic approach; Design thinking; System thinking; Freeform façade design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_386
id	ecaade2018_386
authors	Brandao, Filipe, Paio, Alexandra and Antunes, Nuno
year	2018
title	Towards a Digitally Fabricated Disassemble-able Building System - A CNC fabricated T-Slot Joint
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.ecaade.2018.2.011
summary	Growing dissemination of digital fabrication technologies coupled with a renewed interest in wood as a construction material have led to a resurgence of research into integral wood joints. Recent research on digitally fabricated wood joints has focused primarily on robotic or on CNC router produced snap-fit or tab-and-slot joints. These types of joints have several problems in sheathing to structure connections. The present paper reports on research into design and fabrication of T-slot joints that allow hidden back-face connections which are disassemble-able. It is part of an ongoing research whose aim is to develop disassemble-able and mass customizable construction system of partition walls for building renovation.
keywords	Wood Joints; Digital Fabrication; Wood; Design for Disassembly
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia18_424
id	acadia18_424
authors	Bucklin, Oliver; Drexler, Hans; Krieg, Oliver David; Menges, Achim
year	2018
title	Integrated Solid Timber. A multi-requisite system for the computational design,fabrication, and construction of versatile building envelopes
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 424-433
doi	https://doi.org/10.52842/conf.acadia.2018.424
summary	The paper presents the development of a building system made from solid timber that fulfils the requirements of modern building skins while expanding the design possibilities through innovation in computational design and digital fabrication. Multiple strategies are employed to develop a versatile construction system that generates structure, enclosure and insulation while enabling a broad design space for contemporary architectural expression. The basic construction unit augments the comparatively high insulation values of solid timber by cutting longitudinal slits into beams, generating air chambers that further inhibit thermal conductivity. These units are further enhanced through a joinery system that uses advanced parametric modeling and computerized control to augment traditional joinery techniques. Prototypes of the system are tested at a building component level with digital models and physical laboratory tests. It is further evaluated in a demonstrator building to test development and further refine design, fabrication and assembly methods. Results are integrated into proposals for new methods of implementation. The results of the research thus far demonstrate the validity of the strategy, and continuing research will improve its viability as a building system.
keywords	full paper, materials and adaptive systems, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_268
id	ecaade2018_268
authors	Cheang, Jeremy Jenn Ren and Loh, Paul
year	2018
title	FOAM - Custom Single Task Construction Robot
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 157-164
doi	https://doi.org/10.52842/conf.ecaade.2018.1.157
summary	This paper discusses the design and fabrication of a novel in-situ fabrication system for building cladding envelope. The construction industry has utilised automation in onsite construction for many decades. This research examines how through the automation process, different construction techniques can be combined to generate a new system that is both performance and design lead. Through abstracting generative effects through the design process, the results are feedback into the fabrication process to construct a more meaningful dialogue between form, material and fabrication procedure. Using electronic prototyping, the researchers tested the system through large-scale prototypes. The paper concludes by discussing the interaction between material and design. We examine how this is evident in the machine workflow. The article addresses the theme of the conference through examining a revision of tool in design that embodied research knowledge for a more sustainable environment.
keywords	Digital Fabrication, Design workflow, Automation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_139
id	ecaade2018_139
authors	Cudzik, Jan and Radziszewski, Kacper
year	2018
title	Artificial Intelligence Aided Architectural Design
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 77-84
doi	https://doi.org/10.52842/conf.ecaade.2018.1.077
summary	Tools and methods used by architects always had an impact on the way building were designed. With the change in design methods and new approaches towards creation process, they became more than ever before crucial elements of the creation process. The automation of architects work has started with computational functions that were introduced to traditional computer-aided design tools. Nowadays architects tend to use specified tools that suit their specific needs. In some cases, they use artificial intelligence. Despite many similarities, they have different advantages and disadvantages. Therefore the change in the design process is more visible and unseen before solution are brought in the discipline. The article presents methods of applying the selected artificial intelligence algorithms: swarm intelligence, neural networks and evolutionary algorithms in the architectural practice by authors. Additionally research shows the methods of analogue data input and output approaches, based on vision and robotics, which in future combined with intelligence based algorithms, might simplify architects everyday practice. Presented techniques allow new spatial solutions to emerge with relatively simple intelligent based algorithms, from which many could be only accomplished with dedicated software. Popularization of the following methods among architects, will result in more intuitive, general use design tools.
keywords	computer aideed design; artificial intelligence,; evolutionary algorithms; swarm behaviour; optimization; parametric design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_433
id	ecaade2018_433
authors	Daher, Elie, Kubicki, Sylvain and Pak, Burak
year	2018
title	Participation-based Parametric Design in Early Stages - A participative design process for spatial planning in office building
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 429-438
doi	https://doi.org/10.52842/conf.ecaade.2018.1.429
summary	The term participation has been used to define different activities, such as civil debate, communication, consultation, delegation, self-help construction, political decisions. However, participation in design started from the idea that individuals whom being affected by a design project must contribute to the design process. Recently, designers have been moving closer to the future users and developing new ways to empower them to get involved in the design process. In this paper we rethink the way the early design process is developed in a participatory approach thanks to parametric methods. A use case is proposed showing the potential of parametric design methods to empower the participation of users in the design of their facilities. The use case is dealing in particular with the spatial planning of an office building where the users together with the spatial planning team are able to design the layout spatial configuration by 1) fixing the objectives, 2) manipulating the model, 3)modifying some parameters, 4) visualizing the iterations and evaluating in a real-time each solution in an interactive 3D environment and together with facility managers 5) choosing the configuration of the spatial layout.
keywords	Computational design; Participatory design; Optimization ; Parametric design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2018_292
id	caadria2018_292
authors	Eid Mohamed, Basem, ElKaftangui, Mohamed and Zureikat, Rana
year	2018
title	{In}Formed Panels - Towards Rethinking the Precast Concrete Industry in the UAE
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 287-296
doi	https://doi.org/10.52842/conf.caadria.2018.1.287
summary	The convergence of digital design and fabrication technologies have offered architects and designers the means by which to develop customized architectural artifacts, ones that goes beyond the standards of "one size fits all". Such applications have been applied extensively in various architectural practices, and specifically in the realm of industrialized building production, given that they present a suitable model. Although unrecognized within standard precast concrete production, current research acknowledges the need for advanced computer applications for shifting the industry into a digitized process. This paper represent a critical phase of an ongoing research endeavor that aims at rethinking the precast concrete production in the UAE, and MENA region for housing typologies. The project explores possibilities of a new protocol that is focused from design to production, relying on performative design strategies, and possible optimized for large format 3D printing of concrete elements. The aim is to develop an integrated façade panels system that is tailored for design and production; an approach that goes beyond current industry practices.
keywords	Precast Concrete; Industrialized Construction; Evolutionary Design; Optimization
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia18_336
id	acadia18_336
authors	Forren, James; Nicholas, Claire
year	2018
title	Lap, Twist, Knot. Intentionality in digital-analogue making environments
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 336-341
doi	https://doi.org/10.52842/conf.acadia.2018.336
summary	This paper discusses a theoretical approach and method of making in computational design and construction. The project examines digital and analogue building practices through a social anthropological and STS lens to better understand the use of technology in complex making environments. We position this with respect to contemporary investigations of materials in architecture which use physical and virtual prototyping and collaborative building. Our investigation extends this work by parsing complex making through ethnographic analysis. In doing so we seek to recalibrate computational design methods which privilege rote execution of digital form. This inquiry challenges ideas of agency and intention as ‘enabled’ by new technologies or materials. Rather, we investigate the troubling (as well as extension) of explicit designer intentions by the tacit intentions of technologies. Our approach is a trans-disciplinary investigation synthesizing architectural making and ethnographic analysis. We draw on humanistic and social science theories which examine activities of human-technology exchange and architectural practices of algorithmic design and fabrication. We investigate experimental design processes through prototyping architectural components and assemblies. These activities are examined by collecting data on human-technology interactions through field notes, journals, sketches, and video recordings. Our goal is to foster (and acknowledge) more complex, socially constructed methods of design and fabrication. This work in progress, using a cement composite fabric, is a preliminary study for a larger project looking at complex making in coordination with public engagement.
keywords	work in progress, illusory dichotomies, design theory & history, materials/adaptive systems, collaboration, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia23_v1_34
id	acadia23_v1_34
authors	Gascon Alvarez, Eduardo; Curth, Alexander (Sandy); Feickert, Kiley; Martinez Schulte, Dinorah; Mueller, Caitlin; Ismail, Mohamed
year	2023
title	Algorithmic Design for Low-Carbon, Low-Cost Housing Construction in Mexico
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 34-38.
summary	Mexico is one of the most urbanized countries in the Global South, and simultaneously faces a rapidly increasing population and a deluge of inadequate housing (URBANET 2019). In 2016, it was estimated that 40 percent of all private residences in Mexico were considered inadequate by UN-Habitat (UN-Habitat 2018). As informal housing constitutes over half of all Mexican housing construction, the most vulnerable groups of the population are particularly impacted. Therefore, there is a serious need to innovate in the area of low-cost building construction for housing in Mexico. This research explores how shape-optimized concrete and earth construction could help provide adequate housing without jeopardizing the country’s commitment to sustainability.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	sigradi2018_1694
id	sigradi2018_1694
authors	Griz, Cristiana; Belarmino, Thaciana; Dutra, Julia; Karlla Barbosa, Jeane
year	2018
title	Generative housing: a shape grammar to design and to build social houses
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 331-337
summary	This paper shows the development of a system to generate customized small housing projects. The process of housing construction usually involves investment for the development of the project and for the management of the building process. In small housing, this investment is left aside for economic reasons. However, due to lack of it, the project may not be adequate and its construction can be even more costly. Aiming to contribute to this issue, this paper presents the creation of a generative design system, a shape grammar, that seeks to reinterpret the traditional design/construction process of housing.
keywords	Generative design; shape grammar; housing; visual proggraming
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_w14
id	ecaade2018_w14
authors	Karóczkai, Ákos
year	2018
title	Parametric BIM Models in ARCHICAD - The Grasshopper - ARCHICAD Live Connection
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 63-64
doi	https://doi.org/10.52842/conf.ecaade.2018.1.063
summary	Parametric modelling is a very trending topic in the Architecture Engineering and Construction industry. There is an ever-growing challenge in the industry about how it is possible to document freeform and very design-oriented projects (created in Rhinoceros) in BIM. The ultimate goal of architectural and design projects is to be able to realize the building based on the 2D documentation. Currently Rhinoceros and Grasshopper are the industry-leading algorithmic solutions in the AEC industry. To complement such workflows, GRAPHISOFT developed a live connection between Grasshopper and ARCHICAD in order to generate BIM models, directly from the Visual Programming Interface (Grasshopper) and bridge the gap between the freeform, conceptual- and the BIM worlds.
keywords	Parametric; BIM; ARCHICAD
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: