Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 605

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2018_257
id	caadria2018_257
authors	Yousif, Shermeen and Yan, Wei
year	2018
title	Clustering Forms for Enhancing Architectural Design Optimization
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 431-440
doi	https://doi.org/10.52842/conf.caadria.2018.2.431
summary	This work introduces a new system in architectural design optimization that integrates form diversity and clustering methods into the process. The first method we propose is an algorithm for rating design solutions according to their geometric correspondences, maximizing differences and enforcing diversity. In addition, we implement the K-means algorithm to cluster the resulting design forms into groups of similar forms, to substitute each group with one representative solution. The work aims to facilitate decision making and form evaluation for designers, leading to an interactive optimization process, and contributing to improving existing optimization models in architectural design research and practice. We modeled a dynamic system through prototyping, experimenting and test-case application. As a prototype development, the protocol was done through phases of: (1) parametric modeling, (2) conducting energy simulation and daylight analysis and running a generative system, and (3) developing an algorithm for form diversity and another for implementing K-means clustering. The results are illustrated and discussed in detail in the paper.
keywords	Architectural Design Optimization; Form Diversity; K-Means Clustering
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ijac201816201
id	ijac201816201
authors	Harding, John and Cecilie Brandt-Olsen
year	2018
title	Biomorpher: Interactive evolution for parametric design
source	International Journal of Architectural Computing vol. 16 - no. 2, 144-163
summary	Combining graph-based parametric design with metaheuristic solvers has to date focused solely on performance-based criteria and solving clearly defined objectives. In this article, we outline a new method for combining a parametric modelling environment with an interactive Cluster-Orientated Genetic Algorithm. In addition to performance criteria, evolutionary design exploration can be guided through choice alone, with user motivation that cannot be easily defined. As well as numeric parameters forming a genotype, the evolution of whole parametric definitions is discussed through the use of genetic programming. Visualisation techniques that enable mixing small populations for interactive evolution with large populations for performance-based optimisation are discussed, with examples from both academia and industry showing a wide range of applications.
keywords	Design exploration, genetic programming, human–computer interaction, interactive genetic algorithms, k-means clustering, parametric design
series	journal
email
last changed	2019/08/07 14:03

_id	ijac201816305
id	ijac201816305
authors	Patt, Trevor Ryan
year	2018
title	Multiagent approach to temporal and punctual urban redevelopment in dynamic, informal contexts
source	International Journal of Architectural Computing vol. 16 - no. 3, 199-211
summary	This article presents design research speculating on computationally enabled planning approaches for urban sites where informal developments make conventional masterplans ineffectual. The project advances the thesis that the spatial complexity of urban sites can be effectively studied through a network or mesh representation and that rapid change in informal settlements is not an obstacle to planned redevelopment but can be addressed through dynamic modeling and punctual interventions. In this way, the rapid turnover of the built environment can be a mechanism through which to introduce directed planning without canceling out bottom-up actions. In the case study presented, we use a multiagent approach that is able to adapt to a continuously changing context. The agents are driven by weighted random walks and compute localized analyses of the morphology of the network of public space as they move. The information generated by the multiagent simulation is aggregated to identify potential modifications to the urban fabric, with an emphasis on pedestrian connectivity.
keywords	Adaptive planning, multiagent systems, urban morphology, network analysis, spectral clustering, informal urbanism, generative design, participatory frameworks
series	journal
email
last changed	2019/08/07 14:03

_id	ecaaderis2023_11
id	ecaaderis2023_11
authors	Sepúlveda, Abel, Eslamirad, Nasim, Seyed Salehi, Seyed Shahabaldin, Thalfeldt, Martin and De Luca, Francesco
year	2023
title	Machine Learning-based Optimization Design Workflow based on Obstruction Angles for Building Facades
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 15–24
summary	This paper proposes a ML-based optimization design workflow based on obstruction angles for the optimization of building facades (i.e. g-value and window width). The optimization output consists of the optimal clustering of windows in order to ensure a desired level of daylight provision according to method 2 defined in the EN17307:2018 (i.e. based on Spatial Daylight Autonomy: sDA) and to not exceed a maximum level of specific cooling capacity (SCC). The independent variables or design parameters of the parametric model are: room orientation/dimensions, window dimensions, and obstruction angle (??). The ML prediction models were trained and tested with reliable simulation results using validate softwares. The total number of room combinations is 61440 for sDA and SCC simulations. The development of reliable (90% of right predictions) ML predictive models based on decision tree technique were calibrated. The optimal clustering of windows was done first by floors and secondly by the designer’s need to homogenize the external facade with similar glazing properties and window sizes, having impact on the annual heating consumption. The proposed method help designers to make accurate and faster design decisions during early design stages and renovation plans.
keywords	optimization, daylight, thermal comfort, cooling capacity, machine-learning predictive model, office buildings, cold climates
series	eCAADe
email
last changed	2024/02/05 14:28

_id	ecaade2018_237
id	ecaade2018_237
authors	Beir?o, José, Mateus, Nuno and Siopa Alves, Jo?o
year	2018
title	Modular, Flexible, Customizable Housing and 3D Printed - An experiment in architectural education
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 381-390
doi	https://doi.org/10.52842/conf.ecaade.2018.1.381
summary	Technological developments in construction always bring new expectations in terms of design possibilities. The use of digital tools both in design exploration and applied to explore new forms of computer controlled manufacture provide opportunities for the emergence of new tectonics. Because these transformations change our construction reality fast and with impacts never seen before, it is important that architectural education follows such change and prepares students for what will be their future really, making them capable to accept and incorporate the tectonic implications of digital tools and construction methods in the way they design. This paper shows a tutored approach to mass customized housing resorting to 3D printed parametric modular construction.Please write your abstract here by clicking this paragraph.
keywords	caad education; mass customization; 3D printed housing
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2018_008
id	caadria2018_008
authors	Crolla, Kristof, Cheng, Paul Hung Hon, Chan, Ding Yuen Shan, Chan, Arthur Ngo Foon and Lau, Darwin
year	2018
title	Inflatable Architecture Production with Cable-Driven Robots
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 9-18
doi	https://doi.org/10.52842/conf.caadria.2018.1.009
summary	This paper argues for alternative methods for the in-situ integration of robotics in architectural construction. Rather than promoting off-site pre-fabrication through industrial robot applications, it advocates for suspended, light-weight, cable-driven robots that allow flexible and safe onsite implementation. This paper uses the topic of large-scale inflatable architectural realisation as a study case to test the application of such a robot, here with a laser-cutter as end-effecter. This preliminary study covers the design, development, prototyping, and practical testing of an inherently scale-less cable-driven laser-cutter setup. This setup allows for the non-size specific cutting of inflatable structures' components which can be designed with common physics simulation engines. The developed robotic proof of concept forms the basis for several further and future study possibilities that merge the field of architectural design and implementation with mechanical and automation engineering.
keywords	Cable-driven robots; In-situ robotic fabrication; Large-scale fabrication; Inflatable architecture; Cross-disciplinarily
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2018_333
id	caadria2018_333
authors	Cupkova, Dana, Byrne, Daragh and Cascaval, Dan
year	2018
title	Sentient Concrete - Developing Embedded Thermal and Thermochromic Interactions for Architecture and Built Environment
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2018.2.545
summary	Historically, architectural design focused on adaptation of built environment to serve human needs. Recently embedded computation and digital fabrication have advanced means to actuate physical infrastructure in real-time. These 'reactive spaces' have typically explored movement and media as a means to achieve reactivity and physical deformation (Chatting et al. 2017). However, here we recontextualize 'reactive' as finding new mechanisms for permanent and non-deformable everyday materials and environments. In this paper, we describe our ongoing work to create a series of complex forms - modular concrete panels - using thermal, tactile and thermochromic responses controlled by embedded networked system. We create individualized pathways to thermally actuate these surfaces and explore expressive methods to respond to the conditions around these forms - the environment, the systems that support them, their interaction and relationships to human occupants. We outline the design processes to achieve thermally adaptive concrete panels, illustrate interactive scenarios that our system enables, and discuss opportunities for new forms of interactivity within the built environment.
keywords	Responsive environments; Geometrically induced thermodynamics; Ambient devices; Internet of things; Modular electronic systems
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2018_1879
id	sigradi2018_1879
authors	Danesh Zand, Foroozan; Baghi, Ali; Kalantari, Saleh
year	2018
title	Digitally Fabricating Expandable Steel Structures Using Kirigami Patterns
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 724-731
summary	This article presents a computational approach to generating architectural forms for large spanning structures based on a “paper-cutting” technique. In this traditional artform, a flat sheet is cut and scored in such a way that a small application of force prompts it to expand into a three-dimensional structure. To make these types of expandable structures feasible at an architectural scale, four challenges had to be met during the research. The first was to map the kinetic properties of a paper-cut model, investigating formative parameters such as the width and frequency of cuts to determine how they affect the resulting structure. The second challenge was to computationally simulate the paper-cut structure in an accurate fashion. We accomplished this task using finite element analysis in the Ansys software platform. The third challenge was to create a prediction model that could precisely forecast the characteristics of a paper-cutting pattern. We made significant strides in this demanding task by using a data-mining approach and regression analysis through 400 simulations of various cutting patterns. The final challenge was to verify the efficiency and accuracy of our prediction model, which we accomplished through a series of physical prototypes. Our resulting computational paper-cutting system can be used to estimate optimal cutting patterns and to predict the resulting structural characteristics, thereby providing greater rigor to what has previously been an ad-hoc and experimental design approach.
keywords	Transformable Paper-cut; Design method; Prediction Model; Regression analysis; Physical prototype
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_255
id	ecaade2018_255
authors	Danesh, Foroozan, Baghi, Ali and Kalantari, Saleh
year	2018
title	Programmable Paper Cutting - A Method to Digitally Fabricate Transformable, Complex Structural Geometry
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 489-498
doi	https://doi.org/10.52842/conf.ecaade.2018.2.489
summary	This paper presents a computational approach to generating architectural forms for large spanning structures based on a "paper-cutting" technique. Using this approach, a flat sheet is cut and scored in such a way that a small application of force prompts it to expand into a three-dimensional structure. Our computational system can be used to estimate optimal cutting patterns and to predict the resulting structural characteristics, thereby providing greater rigor to what has previously been an ad-hoc and experimental design approach. To develop the model, we analyzed paper-cutting techniques, extracted the relevant formative parameters, and created a simulation using finite element analysis. We then used a data-mining approach through 400 simulations and applied a regression analysis to create a prediction model. Given a small number of input variables from the designer, this model can rapidly and precisely predict the transformation volume of a paper-cutting pattern. Additional structural characteristics will be modelled in future work. The use of this tool makes paper-cut design approaches more practical by changing a non-systematic, labor-intensive design process into a more precise and efficient one.
keywords	Paper-cut?; Transformable geometry; Design method; Model prediction; Data mining; Regression analysis
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ijac201816204
id	ijac201816204
authors	Gengnagel, Christoph; Riccardo La Magna, Mette Ramsgaard Thomsen and Martin Tamke
year	2018
title	Shaping hybrids – Form finding of new material systems
source	International Journal of Architectural Computing vol. 16 - no. 2, 91-103
summary	Form-finding processes are an integral part of structural design. Because of their limitations, the classic approaches to finding a form – such as hanging models and the soap-film analogy – play only a minor role. The various possibilities of digital experimentation in the context of structural optimisation create new options for the designer generating forms, while enabling control over a wide variety of parameters. A complete mapping of the mechanical properties of a structure in a continuum mechanics model is possible but so are simplified modelling strategies which take into account only the most important properties of the structure, such as iteratively approximating to a solution via representations of kinematic states. Form finding is thus an extremely complex process, determined both by the freely selected parameters and by design decisions.
keywords	Bending active, form finding, hybrid structures, simulation, textile architecture
series	journal
email
last changed	2019/08/07 14:03

_id	ecaade2018_434
id	ecaade2018_434
authors	Hünkar, Ertunç and Figueiredo, Bruno Acácio Ferreira
year	2018
title	3D Printing of High Strength and Multi-Scaled Fragmented Structures
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 173-178
doi	https://doi.org/10.52842/conf.ecaade.2018.1.173
summary	Our research aims to push the limits of 3D printing towards the structural design and optimization. Additive manufacturing has an unique feature which is printing multi-faced complex geometries as easy as simple ones. Therefore additive manufacturing creates the chance of producing really small scaled complex forms. In a structural network, it can be easily understood that the more geometric variations to respond stress, the more adaptive structure will become to respond structural needs. The structural reaction is to be fictionalized by procedural operations and analysis that will be a tool to design multi-scaled fragmented structures. Those operations is to use the structural analysis and material reactions. Their iteration with the overall geometry will form the geometric generations. However the verification of the generations as outcomes of a real 3D printer is crucial. To verify, the precision of additive manufacturing should be sensitive enough that the structural element will function as it's simulated in computer with the algorithm. The sensitivity is important because, even couple of micro-sized problems can cause bigger ones in the structural element itself. The combination of all these variables can enable an initial geometry, to be able to adapt the stuructural needs in every additive generation.
keywords	Additive Manufacturing(AM); Structural Optimization; Selective Laser Sintering(SLS); Structural Design; Shape Grammars; Design Computation
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia18_126
id	acadia18_126
authors	Johns, Ryan Luke; Anderson, Jeffrey
year	2018
title	Interfaces for Adaptive Assembly
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 126-135
doi	https://doi.org/10.52842/conf.acadia.2018.126
summary	While robotic tools have greatly expanded the scope of computational control and design freedom in architectural assembly, the vast majority of projects involving robotic customization depend on standardized, mass produced components. By relinquishing some design agency to automated systems which respond to on-site material variations, it is possible to produce methods of construction which rely on locally-sourced components with low embodied energy. Such adaptive automation can provide resource efficiency and the aesthetic advantages of natural or reclaimed materials, but can also beget technical challenges of increasing complexity. By expanding design goals to incorporate intuitive collaborative interfaces, technical gaps can be understood even by non-experts, and leveraged towards new forms of creative expression. This paper presents the results of an interactive installation in which visitors can provide any variety of objects to a collaborative robotic manipulator (UR5) which recognizes part geometry and attempts to construct a dry-stacked wall from the material offerings. A visual and auditory interface provides suggestions and error messages to participants to facilitate an understanding of the acceptable material morphologies which can be used within the constraints of the system.
keywords	full paper, materials & adaptive systems, non-production robotics, digital materials, representation + perception
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	acadia18_376
id	acadia18_376
authors	Kalantari, Saleh; Becker, Aaron T.; Ike, Rhema
year	2018
title	Designing for Digital Assembly with a Construction Team of Mobile Robots
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 376-385
doi	https://doi.org/10.52842/conf.acadia.2018.376
summary	Advances in construction automation have primarily focused on creating heavy machines to accomplish repetitive tasks. While this approach is valuable in an assembly-line context, it does not always translate well for the diverse terrain and dynamic nature of construction sites. As a result, the use of automation in the architectural assembly has lagged far behind other industries. To address the challenges of construction-site assembly, this project suggests an alternative technique that uses a fl eet of smaller robots working in parallel. The proposed method, which is inspired by the construction techniques of insect colonies, has several advantages over the use of larger machines. It allows for much greater on-site fl exibility and portability. It is also easy to scale the operation, by adding or removing additional units as needed. The use of multiple small robots provides operational redundancy that can adapt to the loss of any particular machine. These advantages make the technology particularly suitable for construction in hazardous or inaccessible areas. The use of assembly robots also opens new horizons for design creativity, allowing architects to explore new ideas that would be unwieldy and expensive to construct using traditional techniques. In our tests, we used a team of small mobile robots to fold 2D laser-cut stock into 3D curved structures, and then assemble these units into larger interlocked forms.
keywords	full paper, automated assembly, digital fabrication, collective behavior, robot, swarm network
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2018_398
id	ecaade2018_398
authors	Papavasiliou, Mattheos
year	2018
title	The Didactic Aspect of Ars Combinatoria in Architectural Design - Employing syntactic ("space syntax") formulations to communicate architectural design to students of Architecture.
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 525-530
doi	https://doi.org/10.52842/conf.ecaade.2018.2.525
summary	This paper presents educative aspects of visualization techniques based on an idea by B. Hillier to illustrate architectural forms with the space syntax theory. It explores and renders the technique of transformation and implementation of syntactic analysis in order to convey to students of Architecture spatial concepts and to differentiate spatial arrangements that present understandably similarities and differences. The technique is applied to plans of well-known examples from the history of Architecture and illustrates to a sufficient extent the theoretical interpretations taught in the architectural design studio.
keywords	architectural configuration; design strategy; design analysis; shape evaluation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2018_264
id	caadria2018_264
authors	Ren, Hui, Han, Yunsong and Sun, Cheng
year	2018
title	transDATA: A Data Recording and Exchanging Plug-in for Architectural Computational Design
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 51-60
doi	https://doi.org/10.52842/conf.caadria.2018.2.051
summary	Building form has a profound influence on the green performance of buildings. And the modeling tools are one of the factors can affect the building forms which play an important role in the design process. Nowadays, parametric modeling tools become popular in the architectural area. However, the functions of data processing and data comparison cannot meet the current modeling data processing requirements which need to be improved urgently. This paper developed the transDATA, which is a plugin based on python to realize the data exchanging and data visualization functions between Grasshopper, Excel and the Figure of python. This plugin allows architects to compare the history design parameters of the building and help architects to select the most ideal scheme efficiently.
keywords	TransDATA; Data processing; Data visualization; Computational design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia18_108
id	acadia18_108
authors	Sanchez, Jose
year	2018
title	Platforms for Architecture: Imperatives and Opportunities of Designing Online Networks for Design
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 108-117
doi	https://doi.org/10.52842/conf.acadia.2018.108
summary	The rise of platforms such as Facebook, YouTube, and Uber, initially celebrated as part of a disruptive new era of the internet, has slowly been reassessed as a problematic and unregulated form of twenty-first-century info-capitalism that contributes to inequality, mistrust, and user polarization. The internet has become a place for content creation, not only consumption, and the content freely created by the network of users has defined a self-organizing system of ad-hoc audiences following echo chambers organized through artificial intelligence, which amplifies previously identified trends. While a large portion of the content created by users seems to be aimed at personal forms of entertainment, a few remarkable projects, such as Wikipedia, have allowed hundreds of users to contribute to a collective goal. While we can observe that the platform model has appeared in diverse disciplines, allowing the creation of content from news articles to music, we have not seen the emergence of a robust design platform intended to proliferate and advance the discipline of architecture. This paper makes the case that video game technology and its audiences have reached a state of technical capability that could allow for architectural platforms to emerge, one in which players could learn, create, and share architectural designs. Such a platform comes with a series of ethical imperatives, questions of value proposition, and liabilities, as well as a high potential to communicate and proliferate architectural knowledge and know-how. Common’hood, currently under development, will be used as a case study to engage the development of an ethical architectural platform that develops a proposition towards authorship, ownership, and collective engagement.
keywords	full paper, platforms, capitalism, network, video game, combinatorics, information theory, entropy, co-ops, platform cooperativism, privacy, encryption
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2018_039
id	caadria2018_039
authors	Zhang, Pengyu and Xu, Weiguo
year	2018
title	Quasicrystal Structure Inspired Spatial Tessellation in Generative Design
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 143-152
doi	https://doi.org/10.52842/conf.caadria.2018.1.143
summary	Quasicrystal structure is a kind of quasiperiodic spatial tessellation formed by several kinds of tiles. Compared with periodic or other aperiodic tiling, it shows superiorities but also drawbacks when used for generative design. It can generate attractive and irregular novel forms with controllable cost for construction, but its strict rules restrict its variety. To cover the disadvantages of these tessellations without diminishing their advantages, a new kind of spatial tessellation, named as Periodic-to-Aperiodic (P-A) Tiling is proposed in this paper with a series of installation design cases, inspired by the primary principles and architectural applications of quasicrystal structure.
keywords	Spatial tessellation; Quasicrystal structure; Generative Design
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2018_261
id	ecaade2018_261
authors	Austern, Guy, Capeluto, Isaac Guedi and Grobman, Yasha Jacob
year	2018
title	Rationalization and Optimization of Concrete Façade Panels
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 727-734
doi	https://doi.org/10.52842/conf.ecaade.2018.1.727
summary	The presented research develops methods for introducing fabrication constraints into architectural design, a process often referred to as design rationalization. In the first stage of the research, a computational method for evaluating the fabrication potential of geometries was developed. The method predicts the feasibility, material use and machining time of a geometry in relation to different fabrication techniques. It uses geometric properties to mathematically estimate these parameters without simulating the actual machining. The second stage of the research describes processes for adapting architectural designs to their fabrication technique. The evaluation method previously developed is used as a fitness criterion for a computational optimization algorithm aimed at adapting concrete façade elements to the fabrication constraints of their molds. A case study demonstrates how the optimization process succeeded in improving the feasibility of different geometries within a time-frame suitable to the architectural design process, and without significant changes to the initial design.
keywords	Optimization; Digital Fabrication; Rationalization; Computational Design Process
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_132
id	ecaade2018_132
authors	Bialkowski, Sebastian
year	2018
title	Topology Optimisation Influence on Architectural Design Process - Enhancing Form Finding Routine by tOpos Toolset utilisation
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.1.139
summary	The paper focuses on possibilities of already known engineering procedures such as Finite Element Method or Topology Optimisation for effective implementation in architectural design process. The existing attempts of complex engineering algorithms implementation, as a form finding approach will be discussed. By intersecting architectural form evaluation with engineering analysis complemented by optimisation algorithms, the new quality of contemporary architecture design process may appears.
keywords	topology optimisation; design support tools; complex geometries; General Programing GPU; CUDA
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: