Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2018_065
id	caadria2018_065
authors	Makki, Mohammed and Showkatbakhsh, Milad
year	2018
title	Control of Morphological Variation Through Population Based Fitness Criteria
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 153-162
doi	https://doi.org/10.52842/conf.caadria.2018.1.153
summary	A primary challenge for the application of an evolutionary process as a design tool is the ability to maintain variation amongst design solutions while simultaneously increasing in fitness. The 'golden rule' of balancing exploration versus exploitation of solutions within the population becomes more critical when the solution set is required to present a controlled degree of phenotypic variation but ensure that convergence of the solution set continues towards increased levels of fitness. The experiments presented within this paper address the control of variation throughout the simulation by means of incorporating a population-based fitness criterion that is utilised as a fitness objective and is calculated dynamically throughout the algorithmic run in both single and multi objective design problems.
keywords	Architecture; Computation ; Evolution; Urban; Variation
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2018_112
id	ecaade2018_112
authors	Yu, K. Daniel, Haeusler, M. Hank, Simon, Katrina and Fabbri, Alessandra
year	2018
title	Data Influenced Infrastructure Generation - Combining holistic urban datasets through a digital Slime Mold algorithm for cycle path generation
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 647-656
doi	https://doi.org/10.52842/conf.ecaade.2018.2.647
summary	Existing infrastructure in cities has become increasingly incapable of operating at its designed efficiency. This demand has been created by the growth in population generating a larger demand and strain on the existing infrastructure. This paper explores how user-generated data could be utilised to create transport infrastructure, more specifically bicycle pathways. Through a series of 'four sprints', a pathway generation system has been adapted from the behaviour of Slime Molds (Physarum Polycephalum), in particular, its ability to define shortest paths on a terrain. The first sprint outlines the design of a Slime Mold algorithm between user-specified points, the second utilises the algorithm for pathway generation in a macro and micro urban scale (acknowledging both the existing infrastructure and cadastral), the third defines weight or effort limits for the pathways in order to suite realistic user-profiles (fitness level of cyclist groups), and the last sprint creates the start and end points for the pathway generation from user-generated data, applying the Slime Mold system to a 'real world' context. Through the four sprints, a design tool has been created that can be used to not only create and analyse cycle pathways, but tweaked for various other forms of tangible transport infrastructure.
keywords	urban planning; agent based modelling; optimisation and decision support; transport planning
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
doi	https://doi.org/10.52842/conf.acadia.2018.312
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_386
id	acadia18_386
authors	Chen, Canhui; Burry, Jane
year	2018
title	(Re)calibrating Construction Simplicity and Design Complexity
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 386-393
doi	https://doi.org/10.52842/conf.acadia.2018.386
summary	Construction simplicity is crucial to cost control, however design complexity is often necessary in order to meet particular spatial performance criteria. This paper presents a case study of a semi-enclosed meeting pod that has a brief that must contend with the seemingly contradictory conditions of the necessary geometric complexities imperative to improved acoustic performance and cost control in construction. A series of deep oculi are introduced as architectural elements to link the pod interior to the outside environment. Their reveals also introduce sound reflection and scattering, which contribute to the main acoustic goal of improved speech privacy. Represented as a three-dimensional funnel like shape, the reveal to each opening is unique in size, depth and angle. Traditionally, the manufacturing of such bespoke architectural elements in many cases resulted in lengthy and costly manufacturing processes. This paper investigates how the complex oculi shape variations can be manufactured using one universal mold. A workflow using mathematical and computational operations, a standardized fabrication approach and customization through tooling results in a high precision digital process to create particular calculated geometries, recalibrated at each stage to account for the paradoxical inexactitudes and inevitable tolerances.
keywords	work in progress,tolerance, developable surface, form finding, construction simplicity, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ecaade2018_344
id	ecaade2018_344
authors	El-Gewely, Noor, Wong, Christopher, Tayefi, Lili, Markopoulou, Areti, Chronis, Angelos and Dubor, Alexandre
year	2018
title	Programming Material Intelligence Using Food Waste Deposition to Trigger Automatic Three-Dimensional Formation Response in Bioplastics
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 271-278
doi	https://doi.org/10.52842/conf.ecaade.2018.2.271
summary	Bioplastics are by their very nature parametric materials, programmable through the selection of constituent components and the ratios in which they appear, and as such present significant potential as architectural building materials for reasons beyond sustainability and biodegradability. This paper presents a system through which rigid three-dimensional doubly curved hyperbolic paraboloid shapes are automatically formed from two-dimensional sheet casts by harnessing the inherent flexibility and expressiveness of bioplastics. The system uses a gelatin-based bioplastic supplemented with granular organic matter from food waste in conjunction with a split-frame casting system that enables the self-formation of three-dimensional geometries by directing the force of the bioplastic's uniform contraction as it dries. By adjusting the food waste added to the bioplastic, its properties can be tuned according to formal and performative needs; here, dehydrated granulated orange peel and dehydrated spent espresso-ground coffee are used both to impart their inherent characteristics and also to influence the degree of curvature of the resulting bioplastic surfaces. Multi-material casts incorporating both orange peel bioplastic and coffee grounds bioplastic are shown to exert a greater influence over the degree of curvature than either bioplastic alone, and skeletonized panels are shown to exhibit the same behavior as their solid counterparts. Potential developments of the technology so as to gain greater control of the curvature performance, particularly in the direction of computer-controlled additive manufacturing, are considered, as is the potential of application in architectural scale.
keywords	Bioplastics; Composites; Fabrication; Materials
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia18_226
id	acadia18_226
authors	Glynn, Ruairi; Abramovic, Vasilija; Overvelde, Johannes T. B.
year	2018
title	Edge of Chaos. Towards intelligent architecture through distributed control systems based on Cellular Automata.
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 226-231
doi	https://doi.org/10.52842/conf.acadia.2018.226
summary	From the “Edge of Chaos”, a mathematical space discovered by computer scientist Christopher Langton (1997), compelling behaviors originate that exhibit both degrees of organization and instability creating a continuous dance between order and chaos. This paper presents a project intended to make this complex theory tangible through an interactive installation based on metamaterial research which demonstrates emergent behavior using Cellular Automata (CA) techniques, illustrated through sound, light and motion. We present a multi-sensory narrative approach that encourages playful exploration and contemplation on perhaps the biggest questions of how life could emerge from the disorder of the universe. We argue a way of creating intelligent architecture, not through classical Artificial Intelligence (AI), but rather through Artificial Life (ALife), embracing the aesthetic emergent possibilities that can spontaneously arise from this approach. In order to make these ideas of emergent life more tangible we present this paper in four integrated parts, namely: narrative, material, hardware and computation. The Edge of Chaos installation is an explicit realization of creating emergent systems and translating them into an architectural design. Our results demonstrate the effectiveness of a custom CA for maximizing aesthetic impact while minimizing the live time of architectural kinetic elements.
keywords	work in progress, complexity, responsive architecture, distributed computing, emergence, installation, interactive architecture, cellular automata
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ecaade2018_104
id	ecaade2018_104
authors	Gürsoy, Benay
year	2018
title	From Control to Uncertainty in 3D Printing with Clay
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 21-30
doi	https://doi.org/10.52842/conf.ecaade.2018.2.021
summary	The use of digital fabrication tools can extend beyond the seamless materialization of the digital model and can continuously inform design ideation through emerging material qualities. Exploring the implications of an approach to digital fabrication that is not based on imposed and rigorous formalisms but on unique and contextual ones constitutes the research agenda. Within this framework, the focus of this paper is on 3D printing with clay. Considering matter not as the static and passive outcome of digitally predetermined form, but as a design generator, a case study on both the materials and tools employed in 3D printing with clay is presented.
keywords	Digital fabrication; additive manufacturing; 3D printing with clay; material computing; uncertainty
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia18_232
id	acadia18_232
authors	Kilian, Axel
year	2018
title	The Flexing Room Architectural Robot. An Actuated Active-Bending Robotic Structure using Human Feedback
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 232-241
doi	https://doi.org/10.52842/conf.acadia.2018.232
summary	Advances in autonomous control of object-scale robots, both anthropomorphic and vehicular, are posing new human–machine interface challenges. In architecture, very few examples of autonomous inhabitable robotic architecture exist. A number of factors likely contribute to this condition, among them the scale and cost of architectural adaptive systems, but on a more fundamental conceptual level also the questions of how architectural robots would communicate with their human inhabitants. The Flexing Room installation is a room-sized actuated active-bending skeleton structure. It uses rudimentary social feedback by counting people to inform its behavior in the form of actuated poses of the room enclosure. An operational full-scale prototype was constructed and tested. To operate it no geometric-based simulation was used; the only communication between computer and structure was in sending values for the air pressure settings and in gathering sensor feedback. The structure’s physical state was resolved through the embodied computation of its interconnected parts, and the people-counting sensor feedback influences its next action. Future work will explore the development of learning processes to improve the human–machine coexistence in space.
keywords	full paper, fabrication & robotics, non-production robotics, materials/adaptive systems, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	caadria2018_097
id	caadria2018_097
authors	Park, Daekwon
year	2018
title	Adaptive THERM-SKIN - Tunable Cellular Materials for Adaptive Thermal Control
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 309-318
doi	https://doi.org/10.52842/conf.caadria.2018.2.309
summary	This research investigates a tunable cellular material system that can alternate between a thermal insulator and a heat exchanger. The capability to morph between these two distinctive thermal functions provide opportunities to create novel material systems that can dynamically adapt to its environment. The operating principle is to strategically deform the cellular material so that the shape and size of the cavities are optimized for the intended thermal function. In the compressed state, the cavity spaces are narrow enough to suppress convection heat transfer and utilize the low thermal conductivity property of still air. The expanded state has the optimum cavity dimensions for air to move through the system and exchange heat with the material system. The first stage of the research utilizes the existing thermal optimization studies for establishing the analytical model for predicting the performance of each state as a function of the geometric features. The second stage constructs a parametric model using the predictions, and two separate material architectures were designed and fabricated based on it. The calibrated analytical model can be utilized in designing various dynamic thermal interaction systems at a wide range of conditions and parameters (e.g., climate, temperature, scale, and material).
keywords	Dynamic Thermal Insulation; Cellular Materials; Thermal Design and Optimization; Adaptive Materials
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia18_66
id	acadia18_66
authors	Peek, Nadya; Gershenfeld, Neil
year	2018
title	Mods: Browser-Based Rapid Prototyping Workflow Composition
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 66-71
doi	https://doi.org/10.52842/conf.acadia.2018.066
summary	Software is shared through files and libraries, but workflows are not. To be able to share workflows for rapid automation, we developed an extensible environment for running CAD, CAM, and machine control. We present Mods, a browser-based environment for data handling, toolpath planning, and machine execution. Users compose modules (either existing modules or new modules they contribute) into workflows for machine automation sequences in a dataflow environment. The modules themselves run client side, implementing the functions used by the modules (such as toolpath planning algorithms or image analysis) in JavaScript, which runs in the browser. The physical machines are connected to a JavaScript server, which listens to commands from the client over a WebSocket connection. Together, these software modules make up an extensible and simple-to-use alternative to traditional CAD/CAM machine control environments.
keywords	work in progress, software, digital fabrication, automation, computer-aided-machining
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	acadia18_82
id	acadia18_82
authors	Sun, Chengyu; Zheng, Zhaohua; Sun, Tongyu
year	2018
title	Hybrid Fabrication. A free-form building process with high on-site flexibility and acceptable accumulative error
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 82-87
doi	https://doi.org/10.52842/conf.acadia.2018.082
summary	Although digital fabrication has a booming development in the building industry, especially in freeform building, its further application in onsite operations is still limited because of the huge flexibility required in programming. On the contrary, traditional manual fabrication onsite deals perfectly with problems that always accompany fatal accumulative errors in freeform building. This study explores a hybrid fabrication paradigm to take advantage of both in an onsite freeform building project, in which there is a cycling human–computer interactive process consisting of manual operation and computer guidance in real time. A Hololens-Kinect system in a framework of typical project camera systems is used in the demonstration. When human builders perceive, decide, and operate the irregular foam bricks in a complex onsite environment, the computer keeps updating the current form through 3D scanning and prompting the position and orientation of the next brick through augmented display. From a starting vault, the computer always fine tunes its control surface according to the gradually installed bricks and keeps following a catenary formula. Thus, the hybrid fabrication actually benefits from the flexibility based on human judgment and operation, and an acceptable level of accumulative error can be handled through computer guidance concerning the structural performance and formal accuracy.
keywords	work in progress, vr/ar/mr, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2018_029
id	caadria2018_029
authors	Ayoub, Mohammed
year	2018
title	Adaptive Façades:An Evaluation of Cellular Automata Controlled Dynamic Shading System Using New Hourly-Based Metrics
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 83-92
doi	https://doi.org/10.52842/conf.caadria.2018.2.083
summary	This research explores utilizing Cellular Automata patterns as climate-adaptive dynamic shading systems to mitigate the undesirable impacts by excessive solar penetration in cooling-dominant climates. The methodological procedure is realized through two main phases. The first evaluates all 256 Elementary Cellular Automata possible rules to elect the ones with good visual and random patterns, to ensure an equitable distribution of the natural daylight in internal spaces. Based on the newly developed hourly-based metrics, simulations are conducted in the second phase to evaluate the Cellular Automata controlled dynamic shadings performance, and formalize the adaptive façade variation logic that maximizes daylighting and minimizes energy demand.
keywords	Adaptive Façade; Dynamic Shading; Cellular Automata; Hourly-Based Metric; Performance Evaluation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2018_405
id	ecaade2018_405
authors	Belém, Catarina and Leit?o, António
year	2018
title	From Design to Optimized Design - An algorithmic-based approach
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 549-558
doi	https://doi.org/10.52842/conf.ecaade.2018.2.549
summary	Stringent requirements of efficiency and sustainability lead to the demand for buildings that have good performance regarding different criteria, such as cost, lighting, thermal, and structural, among others. Optimization can be used to ensure that such requirements are met. In order to optimize a design, it is necessary to generate different variations of the design, and to evaluate each variation regarding the intended criteria. Currently available design and evaluation tools often demand manual and time-consuming interventions, thus limiting design variations, and causing architects to completely avoid optimization or to postpone it to later stages of the design, when its benefits are diminished. To address these limitations, we propose Algorithmic Optimization, an algorithmic-based approach that combines an algorithmic description of building designs with automated simulation processes and with optimization processes. We test our approach on a daylighting optimization case study and we benchmark different optimization methods. Our results show that the proposed workflow allows to exclude manual interventions from the optimization process, thus enabling its automation. Moreover, the proposed workflow is able to support the architect in the choice of the optimization method, as it enables him to easily switch between different optimization methods.
keywords	Algorithmic Design; Algorithmic Analysis; Algorithmic Optimization; Lighting optimization; Black-Box optimization
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2023_083
id	ascaad2023_083
authors	Borges, Marina; Karantino, Lucas; Gorges, Diego
year	2023
title	Walkability: Digital Parametric Process for Analyzing and Evaluating Walkability Criteria in Peripheral Central Regions of Belo Horizonte
source	C+++: Computation, Culture, and Context – Proceedings of the 11th International Conference of the Arab Society for Computation in Architecture, Art and Design (ASCAAD), University of Petra, Amman, Jordan [Hybrid Conference] 7-9 November 2023, pp. 293-304.
summary	According to one of the Sustainable Development Goals (UN, 2018), it is important for cities to be inclusive, safe, resilient, and sustainable. Therefore, it is necessary to prioritize pedestrians and promote active mobility, giving them priority and encouraging walking, as presented in the concepts of TOD (Transit-Oriented Development). Although the master plan suggests that areas located in the regional centrality of Belo Horizonte are enhancing active mobility, residents may still need to use individual or public transportation due to long distances when accessing basic services on foot. In peripheral areas of the city of Belo Horizonte, are there favorable walkability conditions for the residents? Thus, the aim of this research is to use digital technologies to investigate, through a parametric performative model, the quality of the existing routes, with a focus on the peripheral areas of the city. Based on the results obtained, it will be possible to conclude whether there are discrepancies between what is presented in the master plan and, ultimately, to identify potential solutions for the area based on metrics that qualify and enhance active mobility. These solutions may vary according to the specific needs of the location.
series	ASCAAD
email
last changed	2024/02/13 14:40

_id	sigradi2018_1728
id	sigradi2018_1728
authors	Cassiano, Moacir; L. Félix, Lilian; Griz, Cristiana
year	2018
title	Shape Grammar applied to urban morphology studies: land subdivision in urbanized areas.
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 346-352
summary	Currently, the land regulation plans define the urban micro-scale, producing standardized and pre-dimensioned blocks and lots, generating monotony, poor urban quality and high infrastructure costs. In the quest for sustainability, studies point to a density and a certain degree of population density to enable urban infrastructures with qualitative and quantitative gains, through concepts of compactness, completeness and connectivity. This study presents possibilities of batch sizing using the Grammatical method of the Form, through morphological configurations and rules presents possibilities of generation of new formats, distribution of urban lots in the neighborhood Valentina, in João Pessoa - PB and discusses results.
keywords	Urban Lots; Shape Grammar; Sustainability; Urban Density;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_286
id	acadia18_286
authors	Claire Im, Hyeonji; AlOthman, Sulaiman; García del Castillo, Jose Luis
year	2018
title	Responsive Spatial Print. Clay 3D printing of spatial lattices using real-time model recalibration
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 286-293
doi	https://doi.org/10.52842/conf.acadia.2018.286
summary	Additive manufacturing processes are typically based on a horizontal discretization of solid geometry and layered deposition of materials, the speed and the rate of which are constant and determined by the stability criteria. New methods are being developed to enable three-dimensional printing of complex self-supporting lattices, expanding the range of possible outcomes in additive manufacturing. However, these processes introduce an increased degree of formal and material uncertainty, which require the development of solutions specific to each medium. This paper describes a development to the 3D printing methodology for clay, incorporating a closed-loop feedback system of material surveying and self-correction to recompute new depositions based on scanned local deviations from the digital model. This Responsive Spatial Print (RSP) method provides several improvements over the Spatial Print Trajectory (SPT) methodology for clay 3D printing of spatial lattices previously developed by the authors. This process compensates for the uncertain material behavior of clay due to its viscosity, malleability, and deflection through constant model recalibration, and it increases the predictability and the possible scale of spatial 3D prints through real-time material-informed toolpath generation. The RSP methodology and early successful results are presented along with new challenges to be addressed due to the increased scale of the possible outcomes.
keywords	work in progress, closed loop system, spatial clay printing, self-supporting lattice, in-situ printking, extrusion rate, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2018_312
id	ecaade2018_312
authors	Gündüz, Gamze, Oral, Hülya and Yazar, Tu?rul
year	2018
title	Integration of Design Geometry with "Computational Making" in Basic Design Studio - A Case Study of Lanterns Project
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 439-448
doi	https://doi.org/10.52842/conf.ecaade.2018.2.439
summary	Basic design education, as an introduction of design principles to novice students, has two-way of teaching which are design thinking and professional training, since Bauhaus. Initiated in 2009, the Computation-based Basic Design Studio creates a common ground through discussions between students, academics, and professionals from various backgrounds. In this paper, the implementation of parallel courses named Computation-based Basic Design Studio and Design Geometry is discussed upon final assignment of the first semester- New Year's Lanterns. The given assignment structured as a cyclic process through constant feedback between geometric relations, material performance, and, joinery details to achieve novel outcomes that exceed the preliminarily set structural criteria. In relation to individual processes and outcomes of the final assignment, observed tendencies developed by students', at the end of their first-term in design education, will be discussed as final remarks.
keywords	design education; basic design; design geometry; polyhedra
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ijac201816201
id	ijac201816201
authors	Harding, John and Cecilie Brandt-Olsen
year	2018
title	Biomorpher: Interactive evolution for parametric design
source	International Journal of Architectural Computing vol. 16 - no. 2, 144-163
summary	Combining graph-based parametric design with metaheuristic solvers has to date focused solely on performance-based criteria and solving clearly defined objectives. In this article, we outline a new method for combining a parametric modelling environment with an interactive Cluster-Orientated Genetic Algorithm. In addition to performance criteria, evolutionary design exploration can be guided through choice alone, with user motivation that cannot be easily defined. As well as numeric parameters forming a genotype, the evolution of whole parametric definitions is discussed through the use of genetic programming. Visualisation techniques that enable mixing small populations for interactive evolution with large populations for performance-based optimisation are discussed, with examples from both academia and industry showing a wide range of applications.
keywords	Design exploration, genetic programming, human–computer interaction, interactive genetic algorithms, k-means clustering, parametric design
series	journal
email
last changed	2019/08/07 14:03

_id	ecaadesigradi2019_101
id	ecaadesigradi2019_101
authors	Tebaldi, Isadora, Henriques, Gonçalo Castro and Passaro, Andres Martin
year	2019
title	A Generative System for the Terrain Vague - Transcarioca Bus Expressway in Rio de Janeiro
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
doi	https://doi.org/10.52842/conf.ecaade.2019.1.035
summary	The transport infrastructures are important elements in the cities, but, as there is a lack of planning, they tear through the urban fabric and leave empty spaces. Due to government and private disinterest, these spaces become vacant, forgotten and degraded. However, these extensive Terrain Vague offer new potential for urban use. To exploit this potential, we need methodologies that can offer personalised, extensive, feasible urban solutions. For this, we propose a computational generative system, following a 4-step methodology: 1) Site analyses and Terrain Vague identification; 2) Site classification according to parameters based on a "visual grammar"; 3) Algorithm associating space properties with geometric transformation to generate solutions: namely transformative operations in public spaces, additive transformations in semi-public spaces and subtractive operations in semi-private spaces; 4) Solution evaluation and development, according to shade criteria, spatial hierarchy and volumetric density. With our own algorithms combined with genetic algorithms, we guided the evolution of 50 volumetric solutions. The exponential increase in information requires new methodologies (Schwab, 2018). Results show the potential of computational methodologies to produce extensive urban solutions. This research, developed in a final graduation project in Architecture, aims at stimulating generative methodologies in undergraduate courses.
keywords	Terrain Vague; generative systems; parametric urbanism; genetic algorithms
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ecaade2018_279
id	ecaade2018_279
authors	Wortmann, Thomas, Akbar, Zuardin and Schroepfer, Thomas
year	2018
title	Surveying Fitness Landscapes with Performance Explorer - Supporting the Design of a Better Tomorrow with Interactive Visualizations
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 621-630
doi	https://doi.org/10.52842/conf.ecaade.2018.1.621
summary	Increasing applications of parametric design and performance simulations by architectural designers present opportunities to design more resource- and energy-efficient buildings via simulation-based optimization. But Architectural Design Optimization (ADO) is less widespread that one might expect, due to, among other challenges, the problematic integration of optimization with architectural design. This problematic integration stems from a contrast between "wicked" or "co-evolving" architectural design problems and optimization problems. To mitigate the contrast between architectural and optimization problems, this paper presents Performance Explorer, an interactive, visual tool for performance-informed design space exploration (DSE). Performance-informed DSE emphasizes selection, refinement, and understanding over finding highest-performing design candidates. Performance Explorer allows interactive DSE via a visualization of a fitness landscape, with real-time feedback provided with a surrogate model. Performance Explorer is evaluated through a user test with thirty participants and emerges as more supportive and enjoyable to use than manual search and/or optimization.
keywords	Architectural Design Optimization; Performance-informed Design; Interactive Visualization; Design Tool
series	eCAADe
email
last changed	2022/06/07 07:57

For more results click below: