Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2023_10
id	ecaade2023_10
authors	Sepúlveda, Abel, Eslamirad, Nasim and De Luca, Francesco
year	2023
title	Machine Learning Approach versus Prediction Formulas to Design Healthy Dwellings in a Cold Climate
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 359–368
doi	https://doi.org/10.52842/conf.ecaade.2023.2.359
summary	This paper presents a study about the prediction accuracy of daylight provision and overheating levels in dwellings when considering different methods (machine learning vs prediction formulas), training, and validation data sets. An existing high-rise building located in Tallinn, Estonia was considered to compare the best ML predictive method with novel prediction formulas. The quantification of daylight provision was conducted according to the European daylight standard EN 17037:2018 (based on minimum Daylight Factor (minDF)) and overheating level in terms of the degree-hour (DH) metric included in local regulations. The features included in the dataset are the minDF and DH values related to different combinations of design parameters: window-to-floor ratio, level of obstruction, g-value, and visible transmittance of the glazing system. Different training and validation data sets were obtained from a main data set of 5120 minDF values and 40960 DH values obtained through simulation with Radiance and EnergyPlus, respectively. For each combination of training and validation dataset, the accuracy of the ML model was quantified and compared with the accuracy of the prediction formulas. According to our results, the ML model could provide more accurate minDF/DH predictions than by using the prediction formulas for the same design parameters. However, the amount of room combinations needed to train the machine-learning model is larger than for the calibration of the prediction formulas. The paper discuss in detail the method to use in practice, depending on time and accuracy concerns.
keywords	Optimization, Daylight, Thermal Comfort, Overheating, Machine Learning, Predictive Model, Dwellings, Cold Climates
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaaderis2023_11
id	ecaaderis2023_11
authors	Sepúlveda, Abel, Eslamirad, Nasim, Seyed Salehi, Seyed Shahabaldin, Thalfeldt, Martin and De Luca, Francesco
year	2023
title	Machine Learning-based Optimization Design Workflow based on Obstruction Angles for Building Facades
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 15–24
summary	This paper proposes a ML-based optimization design workflow based on obstruction angles for the optimization of building facades (i.e. g-value and window width). The optimization output consists of the optimal clustering of windows in order to ensure a desired level of daylight provision according to method 2 defined in the EN17307:2018 (i.e. based on Spatial Daylight Autonomy: sDA) and to not exceed a maximum level of specific cooling capacity (SCC). The independent variables or design parameters of the parametric model are: room orientation/dimensions, window dimensions, and obstruction angle (??). The ML prediction models were trained and tested with reliable simulation results using validate softwares. The total number of room combinations is 61440 for sDA and SCC simulations. The development of reliable (90% of right predictions) ML predictive models based on decision tree technique were calibrated. The optimal clustering of windows was done first by floors and secondly by the designer’s need to homogenize the external facade with similar glazing properties and window sizes, having impact on the annual heating consumption. The proposed method help designers to make accurate and faster design decisions during early design stages and renovation plans.
keywords	optimization, daylight, thermal comfort, cooling capacity, machine-learning predictive model, office buildings, cold climates
series	eCAADe
email
last changed	2024/02/05 14:28

_id	acadia18_196
id	acadia18_196
authors	Zhang, Yan; Grignard; Aubuchon, Alexander; Lyons, Keven; Larson, Kent
year	2018
title	Machine Learning for Real-time Urban Metrics and Design Recommendations
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 196-205
doi	https://doi.org/10.52842/conf.acadia.2018.196
summary	Cities are growing, becoming more complex, and changing rapidly. Currently, community engagement for urban decision-making is often ineffective, uninformed, and only occurs in projects’ later stages. To facilitate a more collaborative and evidence-based urban decision- making process for both experts and non-experts, real-time feedback and optimized suggestions are essential. However, most of the current tools for urban planning are neither capable of performing complex simulations in real time nor of providing guidance for better urban performance. CityMatrix was introduced to address these challenges. Machine learning techniques were applied to achieve real-time prediction of multiple urban simulations, and thousands of city configurations were simulated. The simulation results were used to train a convolutional neural network (CNN) to predict the traffic and solar performance of unseen city configurations. The prediction with the CNN is thousands of times faster than the original simulations and maintains a high-quality representation of the results. This machine learning approach was applied as a versatile, quick, accurate, and computationally efficient method not only for real-time feedback, but also for optimized design recommendations. Users involved in the evaluation of this project had a better understanding of the embodied trade-offs of the city and achieved their goals in an efficient manner.
keywords	full paper, optimization, collaboration, urban design & analysis, ai & machine learning
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	ecaade2018_399
id	ecaade2018_399
authors	Cutellic, Pierre
year	2018
title	UCHRON - An Event-Based Generative Design Software Implementing Fast Discriminative Cognitive Responses from Visual ERP BCI
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2018.2.131
summary	This research aims at investigating BCI technologies in the broad scope of CAAD applications exploiting early visual cognition in computational design. More precisely, this paper will describe the investigation of key BCI and ML components for the implementation and development of a software supporting this research : Uchron. It will be organised as follows. Firstly, it will introduce the pursued interest and contribution that visual-ERP EEG based BCI application for Generative Design may provide through a synthetic review of precedents and BCI technology. Secondly, selected BCI components will be described and a methodology will be presented to provide an appropriate framework for a CAAD software approach. This section main focus is on the processing component of the BCI. It distinguishes two key aspects of discrimination and generation in its design and proposes a new model based on GAN for modulated adversarial design. Emphasis will be made on the explicit use of inference loops integrating fast human cognitive responses and its individual capitalisation through time in order to reflect towards the generation of design and architectural features.
keywords	Human Computer Interaction; Neurodesign; Generative Design; Design Computing and Cognition; Machine Learning
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2018_181
id	caadria2018_181
authors	Chun, Junho, Lee, Juhun and Park, Daekwon
year	2018
title	TOPO-JOINT - Topology Optimization Framework for 3D-Printed Building Joints
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 205-214
doi	https://doi.org/10.52842/conf.caadria.2018.1.205
summary	Joints and connectors are often the most complex element in building assemblies and systems. To ensure the performance of the assemblies and systems, it is critical to optimize the geometry and configurations of the joints based on key functional requirements (e.g., stiffness and thermal exchange). The proposed research focuses on developing a multi-objective topology optimization framework that can be utilized to design highly customized joints and connections for building applications. The optimized joints that often resemble tree structures or bones are fabricated using additive manufacturing techniques. This framework is built upon the integration of high-fidelity topology optimization algorithms, additive manufacturing, computer simulations and parametric design. Case studies and numerical applications are presented to demonstrate the validity and effectiveness of the proposed optimization and additive manufacturing framework. Optimal joint designs from a variety of architectural and structural design considerations, such as stiffness, thermal exchange, and vibration are discussed to provide an insightful interpretation of these interrelationships and their impact on joint performance.
keywords	Topology optimization; parametric design; 3d printing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_315
id	ecaade2018_315
authors	Koehler, Daniel, Abo Saleh, Sheghaf, Li, Hua, Ye, Chuwei, Zhou, Yaonaijia and Navasaityte, Rasa
year	2018
title	Mereologies - Combinatorial Design and the Description of Urban Form.
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 85-94
doi	https://doi.org/10.52842/conf.ecaade.2018.2.085
summary	This paper discusses the ability to apply machine learning to the combinatorial design-assembly at the scale of a building to urban form. Connecting the historical lines of discrete automata in computer science and formal studies in architecture this research contributes to the field of additive material assemblies, aggregative architecture and their possible upscaling to urban design. The following case studies are a preparation to apply deep-learning on the computational descriptions of urban form. Departing from the game Go as a testbed for the development of deep-learning applications, an equivalent platform can be designed for architectural assembly. By this, the form of a building is defined via the overlap between separate building parts. Building on part-relations, this research uses mereology as a term for a set of recursive assembly strategies, integrated into the design aspects of the building parts. The models developed by research by design are formally described and tested under a digital simulation environment. The shown case study shows the process of how to transform geometrical elements to architectural parts based merely on their compositional aspects either in horizontal or three-dimensional arrangements.
keywords	Urban Form; Discrete Automata ; Combinatorics; Part-Relations; Mereology; Aggregative Architecture
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2018_210
id	caadria2018_210
authors	Lin, Yuqiong, Zheng, Jingyun, Yao, Jiawei and Yuan, Philip F.
year	2018
title	Research on Physical Wind Tunnel and Dynamic Model Based Building Morphology Generation Method
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 165-174
doi	https://doi.org/10.52842/conf.caadria.2018.2.165
summary	The change of the building morphology directly affects the surrounding environment, while the evaluation of these environment data becomes the main basis for the genetic iterations of the building morphology. Indeed, due to the complexity of the outdoor natural ventilation, multiple factors in the site could be the main reasons for the change of air flow. Thus, the architect is suggested to take the wind environment as the main morphology generation factor in the early stage of the building design. Based on the research results of 2017 DigitalFUTURE Wind Tunnel Visualization Workshop, a novel self-form-finding method in design infancy has been proposed. This method uses Arduino to carry out the dynamic design of the building model, which can not only connect the sensor to monitor the wind environment data, but also contribute the building model to correlate with the wind environment data in real time. The integration of the Arduino platform and the physical wind tunnel can create the possibility of continuous and real-time physical changes, data collection and wind environment simulation, using quantitative environmental factors to control building morphology, and finally achieve the harmony among the building, environment and human.
keywords	Physical wind tunnel; dynamic model; building morphology generation; environmental performance design; wind environment visualization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2018_264
id	caadria2018_264
authors	Ren, Hui, Han, Yunsong and Sun, Cheng
year	2018
title	transDATA: A Data Recording and Exchanging Plug-in for Architectural Computational Design
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 51-60
doi	https://doi.org/10.52842/conf.caadria.2018.2.051
summary	Building form has a profound influence on the green performance of buildings. And the modeling tools are one of the factors can affect the building forms which play an important role in the design process. Nowadays, parametric modeling tools become popular in the architectural area. However, the functions of data processing and data comparison cannot meet the current modeling data processing requirements which need to be improved urgently. This paper developed the transDATA, which is a plugin based on python to realize the data exchanging and data visualization functions between Grasshopper, Excel and the Figure of python. This plugin allows architects to compare the history design parameters of the building and help architects to select the most ideal scheme efficiently.
keywords	TransDATA; Data processing; Data visualization; Computational design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ijac201816202
id	ijac201816202
authors	Tamke, Martin; Paul Nicholas and Mateusz Zwierzycki
year	2018
title	Machine learning for architectural design: Practices and infrastructure
source	International Journal of Architectural Computing vol. 16 - no. 2, 123-143
summary	In this article, we propose that new architectural design practices might be based on machine learning approaches to better leverage data-rich environments and workflows. Through reference to recent architectural research, we describe how the application of machine learning can occur throughout the design and fabrication process, to develop varied relations between design, performance and learning. The impact of machine learning on architectural practices with performance-based design and fabrication is assessed in two cases by the authors. We then summarise what we perceive as current limits to a more widespread application and conclude by providing an outlook and direction for future research for machine learning in architectural design practice.
keywords	Machine learning, robotic fabrication, design-integrated simulation, material behaviour, feedback, Complex Modelling
series	journal
email
last changed	2019/08/07 14:03

_id	caadria2018_290
id	caadria2018_290
authors	Wang, Zhenyu, Shi, Jia, Yu, Chuanfei and Gao, Guoyuan
year	2018
title	Automatic Design of Main Pedestrian Entrance of Building Site Based on Machine Learning - A Case Study of Museums in China's Urban Environment
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 227-235
doi	https://doi.org/10.52842/conf.caadria.2018.2.227
summary	The main pedestrian entrance of the building site has a direct influence on the use of the buildings, so the selection of the main pedestrian entrance is very important in the process of architectural design. The correct selection of the main pedestrian entrance of building site depends on the experience of designers and environment data collected by designers, the process is time consuming and inefficient, especially when the building site located in complex urban environment. In order to improve the efficiency of design process, we used online map to collect museums information in China as training samples, and constructing artificial neural networks to predict the direction of the main pedestrian entrance. After the training, we get the prediction model with 79% prediction accuracy. Although the accuracy still need to be improved, it creates a new approach to analysis the main pedestrian entrance of the site and worth further researching.
keywords	Artificial Neural Network (ANN); Main Pedestrian Entrance of Building Site; Automatic Design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2018_209
id	caadria2018_209
authors	Yao, Jiawei, Lin, Yuqiong, Zhao, Yao, Yan, Chao, Li, Changlin and Yuan, Philip F.
year	2018
title	Augmented Reality Technology based Wind Environment Visualization
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 369-377
doi	https://doi.org/10.52842/conf.caadria.2018.1.369
summary	Considering the outdoor environment at the initial stage of design process plays a significant role on future building performance. Augmented Reality (AR) technology applied in this research can integrate real world building morphology information and virtual world ventilation information seamlessly that rapidly and directly provides designers information for observation and evaluation. During the case study of "2017 Shanghai DigitalFUTURE" summer workshop, a research on augmented reality technology based wind environment visualization was carried on. The achievement with an application software not only showed the geometric information of the real world objects (such as buildings), but also the virtual wind environment has displayed. Thus, these two kinds of information can complement and superimpose each other. This AR technology based software brings multiple synthetic together, which can (1) visualize the air flow around buildings that provides designers rapid and direct information for evaluation; (2) deal with wind-environment-related data quantitatively and present in an intuitive, easy-to-interpret graphical way; and (3) be further developed as a visualization system based on built-in environments in the future, which contributes to rapid evaluation of a series of programs at the beginning of the building design.
keywords	Environment visualization; Augmented reality technology; Fast response; Outdoor ventilation
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia18_186
id	acadia18_186
authors	Yin, Hao; Guo, Zhe; Zhao, Yao; Yuan, Philip F.
year	2018
title	Behavior Visualization System Based on UWB Positioning Technology
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 186-195
doi	https://doi.org/10.52842/conf.acadia.2018.186
summary	This paper takes behavioral performance as a starting point and uses ultra-wideband (UWB) positioning technology and visualization methods to accurately collect and present in-place behavioral data so as to explore the behavioral characteristics of space users. In this process, we learned the observation, quantification, and presentation of behavioral data from the evolution of behavioral research. Secondly, after a comparative analysis of four types of indoor positioning technologies, we selected UWB-positioning technology and the JavaScript programming language as the development tools for a behavior visualization system. Next, we independently developed the behavior visualization system, which required a deep understanding of the working principle of UWB technology and the visualization method of the JavaScript programming language. Finally, the system was applied to an actual space, collecting and presenting users’ behavioral characteristics and habits in order to verify the applicability of the system in the field of behavioral research.
keywords	full paper, design tools, ai + machine learning, big data, behavioral performance + simulation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2018_082
id	caadria2018_082
authors	Zhu, Li and Yang, Yang
year	2018
title	Optimization Design Study of Lightweight Temporary Building Integrated with PCMS Through CFD Simulation
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 155-164
doi	https://doi.org/10.52842/conf.caadria.2018.2.155
summary	In fact, the phase change materials (PCMs) integrated in the building envelope structure can decrease the buildings' energy consumption by enhancing thermal energy storage capacity, which has been acknowledged and appreciated by many engineers and architects. To achieve a better practical application effect under the minimum cost principle and provide a different design method based on indoor thermal discomfort evaluation results for stakeholders, this paper numerically test the application effect of composite envelope under Tianjin climate through commercial computational fluid dynamic soft (Fluent). Further, parameter sensitivity to thermal performance of the composite envelope and indoor thermal discomfort are investigated in this paper, and two different evaluation indicators are introduced and used here. The numerical results obtained in this paper support the high potential of using PCM in lightweight temporary buildings and highlight the further optimization design work.
keywords	Optimization design; Lightweight temporary building; PCMs; CFD simulation
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2018_164
id	ecaade2018_164
authors	Chang, Mei-Chih, Buš, Peter, Tartar, Ayça, Chirkin, Artem and Schmitt, Gerhard
year	2018
title	Big-Data Informed Citizen Participatory Urban Identity Design
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 669-678
doi	https://doi.org/10.52842/conf.ecaade.2018.2.669
summary	The identity of an urban environment is important because it contributes to self-identity, a sense of community, and a sense of place. However, under present-day conditions, the identities of expanding cities are rapidly deteriorating and vanishing, especially in the case of Asian cities. Therefore, cities need to build their urban identity, which includes the past and points to the future. At the same time, cities need to add new features to improve their livability, sustainability, and resilience. In this paper, using data mining technologies for various types of geo-referenced big data and combine them with the space syntax analysis for observing and learning about the socioeconomic behavior and the quality of space. The observed and learned features are identified as the urban identity. The numeric features obtained from data mining are transformed into catalogued levels for designers to understand, which will allow them to propose proper designs that will complement or improve the local traditional features. A workshop in Taiwan, which focuses on a traditional area, demonstrates the result of the proposed methodology and how to transform a traditional area into a livable area. At the same time, we introduce a website platform, Quick Urban Analysis Kit (qua-kit), as a tool for citizens to participate in designs. After the workshop, citizens can view, comment, and vote on different design proposals to provide city authorities and stakeholders with their ideas in a more convenient and responsive way. Therefore, the citizens may deliver their opinions, knowledge, and suggestions for improvements to the investigated neighborhood from their own design perspective.
keywords	Urban identity; unsupervised machine learning; Principal Component Analysis (PCA); citizen participated design; space syntax
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2018_314
id	caadria2018_314
authors	Kim, Jin Sung, Song, Jae Yeol and Lee, Jin Kook
year	2018
title	Approach to the Extraction of Design Features of Interior Design Elements Using Image Recognition Technique
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 287-296
doi	https://doi.org/10.52842/conf.caadria.2018.2.287
summary	This paper aims to propose deep learning-based approach to the auto-recognition of their design features of interior design elements using given digital images. The recently image recognition technique using convolutional neural networks has shown great success in the various field of research and industry. The open-source frameworks and pre-trained image recognition models supporting image recognition task enable us to easily retrain the models to apply them on any domain. This paper describes how to apply such techniques on interior design process and depicts some demonstration results in that approaches. Furniture that is one of the most common interior design elements has sub-feature including implicit design features, such as style, shape, function as well as explicit properties, such as component, materials, and size. This paper shows to retrain the model to extract some of the features for efficiently managing and utilizing such design information. The target element is chair and the target design features are limited to functional features, materials, seating capacity and design style. Total 3933 chair images dataset and 6 retrained image recognition models were utilized for retraining. Through the combination of those multiple models, inference demonstration also has been described.
keywords	Deep learning; Image recognition; Interior design elements; Design feature; Chair
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
doi	https://doi.org/10.52842/conf.acadia.2018.216
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ijac201816406
id	ijac201816406
authors	As, Imdat; Siddharth Pal and Prithwish Basu
year	2018
title	Artificial intelligence in architecture: Generating conceptual design via deep learning
source	International Journal of Architectural Computing vol. 16 - no. 4, 306-327
summary	Artificial intelligence, and in particular machine learning, is a fast-emerging field. Research on artificial intelligence focuses mainly on image-, text- and voice-based applications, leading to breakthrough developments in self-driving cars, voice recognition algorithms and recommendation systems. In this article, we present the research of an alternative graph- based machine learning system that deals with three-dimensional space, which is more structured and combinatorial than images, text or voice. Specifically, we present a function-driven deep learning approach to generate conceptual design. We trained and used deep neural networks to evaluate existing designs encoded as graphs, extract significant building blocks as subgraphs and merge them into new compositions. Finally, we explored the application of generative adversarial networks to generate entirely new and unique designs.
keywords	Architectural design, conceptual design, deep learning, artificial intelligence, generative design
series	journal
email
last changed	2019/08/07 14:04

_id	sigradi2018_1806
id	sigradi2018_1806
authors	Barbosa Cabral, Sthefane Adrielly; Alejandro Nome, Carlos; Queiroz, Natália
year	2018
title	Pilot study of numerical modeling tool to evaluate the thermal performance of walls according to Brazilian standards
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 286-293
summary	The paper discusses a numerical modeling tool to evaluate thermal performance of building envelope according to Brazilian NBR15.220 and NBR 15.575 standards. Contemporary integrated design processes require the development of early design stage decision support mechanisms in order to optimize building performance. The development of the proposed tool focused on early stage decisions on building envelope design and integrating tool usability in the design process. Results indicate that the proposed tool provides basis for decision making that respond to Brazilian standards previously disregarded by participants. Also indicate improved understanding on parameters that affect building envelope thermal performance.
keywords	Thermal performance, Numeric modeling tool, Building envelope, Evidence Based Design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_405
id	ecaade2018_405
authors	Belém, Catarina and Leit?o, António
year	2018
title	From Design to Optimized Design - An algorithmic-based approach
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 549-558
doi	https://doi.org/10.52842/conf.ecaade.2018.2.549
summary	Stringent requirements of efficiency and sustainability lead to the demand for buildings that have good performance regarding different criteria, such as cost, lighting, thermal, and structural, among others. Optimization can be used to ensure that such requirements are met. In order to optimize a design, it is necessary to generate different variations of the design, and to evaluate each variation regarding the intended criteria. Currently available design and evaluation tools often demand manual and time-consuming interventions, thus limiting design variations, and causing architects to completely avoid optimization or to postpone it to later stages of the design, when its benefits are diminished. To address these limitations, we propose Algorithmic Optimization, an algorithmic-based approach that combines an algorithmic description of building designs with automated simulation processes and with optimization processes. We test our approach on a daylighting optimization case study and we benchmark different optimization methods. Our results show that the proposed workflow allows to exclude manual interventions from the optimization process, thus enabling its automation. Moreover, the proposed workflow is able to support the architect in the choice of the optimization method, as it enables him to easily switch between different optimization methods.
keywords	Algorithmic Design; Algorithmic Analysis; Algorithmic Optimization; Lighting optimization; Black-Box optimization
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: