Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2018_1619
id	sigradi2018_1619
authors	Agirbas, Asli
year	2018
title	Creating Non-standard Spaces via 3D Modeling and Simulation: A Case Study
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1051-1058
summary	Especially in the film industry, architectural spaces away from Euclidean geometry are brought to foreground. The best environment in which such spaces can be designed, is undoubtedly the 3D modeling environment. In this study, an experimental study was carried out on the creation of alternative spaces with undergraduate architectural students. Via using 3D modeling and various simulation techniques in the Maya software, students created spaces, which were away from the traditional architectural spaces. Thus, in addition to learning the 3D modeling software, architectural students learned to use animation and simulation as a part of design, not just as a presentation tool, and opening up new horizons for non-standard spaces was provided.
keywords	3D Modeling; Simulation; Animation; CAAD; Maya; Non-standard spaces
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_260
id	ecaade2018_260
authors	Kallegias, Alexandros
year	2018
title	Design by Computation - A material driven study
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 279-284
doi	https://doi.org/10.52842/conf.ecaade.2018.2.279
summary	The paper aims to address methods of creating a system for design through material studies that are employed as feedback on a computational digital model. The case study described in this paper is the output of an exploration that has investigated physical transformation, interaction and wood materiality over the period of two weeks of the international architecture programme AA Athens Visiting School in Greece. Real-time performative form-responsive methods based on bending and stretching have been developed and simulated in an open-source programming environment. The output of the simulation has been informed by the results of material tests that took place in parallel and have served as inputs for the fine-tuning of the simulation. Final conclusions were made possible from these explorations that enabled the fabrication of a prototype using wood veneer at one-to-one scale. From a pedagogical aspect, the research main focus is to improve the quality of architectural education by learning through making. This is made possible using advanced computational techniques and coupling them with material studies towards an integrated system for architectural prototypes within a limited time frame.
keywords	materiality; computation; 1:1 scale prototyping; simulation; fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2018_008
id	caadria2018_008
authors	Crolla, Kristof, Cheng, Paul Hung Hon, Chan, Ding Yuen Shan, Chan, Arthur Ngo Foon and Lau, Darwin
year	2018
title	Inflatable Architecture Production with Cable-Driven Robots
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 9-18
doi	https://doi.org/10.52842/conf.caadria.2018.1.009
summary	This paper argues for alternative methods for the in-situ integration of robotics in architectural construction. Rather than promoting off-site pre-fabrication through industrial robot applications, it advocates for suspended, light-weight, cable-driven robots that allow flexible and safe onsite implementation. This paper uses the topic of large-scale inflatable architectural realisation as a study case to test the application of such a robot, here with a laser-cutter as end-effecter. This preliminary study covers the design, development, prototyping, and practical testing of an inherently scale-less cable-driven laser-cutter setup. This setup allows for the non-size specific cutting of inflatable structures' components which can be designed with common physics simulation engines. The developed robotic proof of concept forms the basis for several further and future study possibilities that merge the field of architectural design and implementation with mechanical and automation engineering.
keywords	Cable-driven robots; In-situ robotic fabrication; Large-scale fabrication; Inflatable architecture; Cross-disciplinarily
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_233
id	ecaade2018_233
authors	Kontiza, Iacovina, Spathi, Theodora and Bedarf, Patrick
year	2018
title	Spatial Graded Patterns - A case study for large-scale differentiated space frame structures utilising high-speed 3D-printed joints
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-46
doi	https://doi.org/10.52842/conf.ecaade.2018.2.039
summary	Geometric differentiation is no longer a production setback for industrial grade architectural components. This paper introduces a design and fabrication workflow for non-repetitive large-scale space frame structures composed of custom-manufactured nodes, which exploits the advantages of latest advancements in 3D-printing technology. By integrating design, fabrication and material constraints into a computational methodology, the presented approach addresses additive manufacturing of functional industry-grade parts in short time, high speed and low cost. The resulting case study of a 4.5 x 4.5 x 2.5 m lightweight kite structure comprises 1380 versatile fully-customised connectors and outlines the manifold potential of additive manufacturing for architecture much bigger than the machine built space. First, after briefly introducing space frames in architecture, this paper discusses the computational framework of generating irregular space frames and parametric joint design. Second, it examines the advantages of MJF printing in conjunction with integrating smart sequencing details for the following assembly process. Finally, a conclusive outlook is given on improvements and further developments for bespoke 3D-printed space frame structures.
keywords	3D-printing; Multi-Jet Fusion; Space Frame; Graded Subdivision
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2018_1335
id	sigradi2018_1335
authors	Wang, Sining; Crolla, Kristof
year	2018
title	Fuzzy set theory for parametric design: A case study of non-standard architectural practice in China
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 44-51
summary	This paper introduces the fuzzy set theory to parametric architectural design and presents it as a strategy which architects can adopt to control a project’s complexity during the stage of design development. We discuss how the fuzzy set theory‘s ‘vagueness’ allows architects to delay their decision makings, especially when they are facing implementing situations where it is difficult to provide additional information needed for complex construction. In this study, we first introduce a metric for project complexity proposed by William Mitchell, who uses the notion of design content and construction content. Followed this we will explain the fuzzy set theory and its rationale for parametric designs.
keywords	Fuzzy set theory; Parametric design; Non-standard façade; Local affordances; China
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaaderis2018_116
id	ecaaderis2018_116
authors	Giannopoulou, Effimia, Montás Laracuente, Nelson Bernardo and Baquero, Pablo
year	2018
title	Qualitative Study on two Kinetic System Simulations - Experiments Based on Shape Memory Material and Stepper Motors
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 95-102
keywords	This investigation intends to compare two computational design experiments operating on two kinetic architecture (Zuk and Clark 1970) design application domains: Shape-memory material (SMM) activated grids and stepper-actuated (SA) responsive skins. In the first one, the goal was to build a standard way of simulating SMM, which can be used as actuators in the construction of kinetic structures and in the second, to simulate and construct a responsive skin according to human interaction using kinect and stepper motors. In both experiments, a similar generative workflow was employed, combining insights from materials and mechanical systems. The objective is to investigate kinetic performance, kinetic design methodology, simulation implementation and applications within the two separate design domains. The general hypothesis is that both experiments become design workflows in themselves as real-time, dynamic modeling systems. A qualitatively study of both sets of cases, is taking in count general, simulation and application aspects, using evaluation criteria including workflow, material quantity, data capture and mechanical properties.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaade2018_133
id	ecaade2018_133
authors	Eloy, Sara, Ourique, Lázaro, Woessner, Uwe, Kieferle, Joachim and Schotte, Wolfgang
year	2018
title	How Present am I - Three virtual reality facilities testing the fear of falling
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 717-726
doi	https://doi.org/10.52842/conf.ecaade.2018.2.717
summary	Virtual reality environments have long been used in studies related to architecture simulation. The main objective of this paper is to measure the sense of presence that different virtual reality devices provide to users so as to evaluate their effectiveness when used to simulate real environments and draw conclusions of people's behaviors when using them. The study also aims at investigating, in a quantitative way, the influence of architectural elements on the comfort of use of a built environment, namely considering the fear of falling reported by adults while using these architectural elements. Using a between-subjects design randomly distributed between two experimental conditions (safe and unsafe), a set of three studies were conducted in three different virtual reality environments using a 5-sided-CAVE, a Powerwall or a Head Mounted Display. The study shows that immersive virtual reality devices give users a higher sense of presence than semi-immersive ones. One of the conclusions of the study is that a higher sense of presence helps to enhance the building spaces perceived impacts on users (in this case the fear of falling).
keywords	Virtual Reality; Presence; Fear of falling; CAVE; HMD; Powerwall
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2018_1642
id	sigradi2018_1642
authors	Pereira Bezerra de Melo Junior, Silvio; Canuto da Silva, Robson
year	2018
title	Aplicability of 2D and 3D isovists and visibility graph analysis for evaluating urban vulnerability to crime: the case of Boa Viagem, in Recife
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 308-315
summary	This work aims to investigate the applicability of 2D and 3D isovists, as well as Visibility Graph Analysis (VGA), for evaluating urban vulnerability to crime. The methodology is based on correlations between number of crime occurrences and measurements of 2D and 3D isovists, and mean values of visual integration (VGA). The 2D isovists were produced through DeCoding Spaces Toolbox for Grasshopper and the 3D isovists were generated by using algorithms within Rhinoceros and Grasshopper. VGA maps were elaborated within DepthmapX. For this study, were selected nine street segments of Boa Viagem, located in Recife-PE, a neighbourhood which is known for high rates of robberies. Although the number of samples is reduced, the results suggest that criminals prefer much more visually integrated spaces with low occlusivity and fewer spatial cavities.
keywords	Criminality; isovist; parametric; urban space; space syntax
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2018_331
id	ecaade2018_331
authors	Trento, Armando and Fioravanti, Antonio
year	2018
title	Contextual Capabilities Meet Human Behaviour - Round the peg and square the hole
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 613-620
doi	https://doi.org/10.52842/conf.ecaade.2018.1.613
summary	To improve environmental wellbeing and productivity, design innovation focuses on human's use-process, evolving individual space to flexible and specialized ones, according to the users' tasks - activity-based. BIM models supports sophisticated behaviours' simulation such as energy, acoustics, although it is not able to manage space use-processes. The present paper rather than a report of a case study or the presentation of a new methodology wants to contribute, together with previous works, in sketching a theroretical framework within which it is possible to compute the interaction between users and spaces (and vice versa). The quest is to reflect on possible paths for engineering knowledge and understanding, providing a BIM system the semantic information required to operate adaptively and achieve robust and innovative goal-directed behavior. Compared to current research on simulation systems, this research approach links Context, intended as spaces capabilities to Actor's Behavioural Knowledge including formalization of personality typologies and profiled behavioural patterns. By means of a classical problem solving metaphor, the "squared peg in a round hole" one, multiple categories for goal achievement are sketched, based on reciprocal Actors and Context behaviour adaptation.
keywords	Use-process Knowledge; Behavioural Knowledge; Use Simulation; Cognitive Computing
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2018_315
id	ecaade2018_315
authors	Koehler, Daniel, Abo Saleh, Sheghaf, Li, Hua, Ye, Chuwei, Zhou, Yaonaijia and Navasaityte, Rasa
year	2018
title	Mereologies - Combinatorial Design and the Description of Urban Form.
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 85-94
doi	https://doi.org/10.52842/conf.ecaade.2018.2.085
summary	This paper discusses the ability to apply machine learning to the combinatorial design-assembly at the scale of a building to urban form. Connecting the historical lines of discrete automata in computer science and formal studies in architecture this research contributes to the field of additive material assemblies, aggregative architecture and their possible upscaling to urban design. The following case studies are a preparation to apply deep-learning on the computational descriptions of urban form. Departing from the game Go as a testbed for the development of deep-learning applications, an equivalent platform can be designed for architectural assembly. By this, the form of a building is defined via the overlap between separate building parts. Building on part-relations, this research uses mereology as a term for a set of recursive assembly strategies, integrated into the design aspects of the building parts. The models developed by research by design are formally described and tested under a digital simulation environment. The shown case study shows the process of how to transform geometrical elements to architectural parts based merely on their compositional aspects either in horizontal or three-dimensional arrangements.
keywords	Urban Form; Discrete Automata ; Combinatorics; Part-Relations; Mereology; Aggregative Architecture
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_216
id	ecaade2018_216
authors	Yavuz, Ecenur, Çolako?lu, Birgül and Aktaº, Begüm
year	2018
title	From Pattern Making to Acoustic Panel Making Utilizing Shape Grammars
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 477-486
doi	https://doi.org/10.52842/conf.ecaade.2018.2.477
summary	This paper presents the application of shape grammars in a real case design problem. The design problem is stated as developing computational acoustic panel solution for classroom with various acoustic problems by modifying 2D pattern, which basically utilizes shape grammars. The study demonstrates interdisciplinary environment of design education and discussions of shape grammars in acoustic panel design and making. It includes different methods to design, like intuitive tendencies, computational thinking, computational tools, and computer simulations. The rule sets of the 2D (pencil-paper-based) pattern are intuitively created by the designer with simultaneous studies of understanding shape grammars. The study consists of three stages. The first stage illustrates 2D pattern generation utilizing computational thinking via shape grammar methodology, second stage illustrates computer generation of 2D pattern with the help of computational tools, and the third stage utilization and modification of this 2D pattern into 3D acoustic panel with feedbacks of computer simulations.
keywords	computational design; computer-generated geometrical design; shape grammar; acoustic; odeon
series	eCAADe
email
last changed	2022/06/07 07:57

_id	sigradi2018_1412
id	sigradi2018_1412
authors	de Oliveira Gomes, Emerson Bruno; da Silva Machado, Rodrigo Carlos; Machado Gomes, Cristiani; de Souza Xavier, Luis Gustavo
year	2018
title	The Virtual Reality as a tool to analyze modifications in the architecture of the city. Case study: the historical center of the city of Belém-Pará.
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 860-865
summary	This paper presents the partial results of a research that experiments the use of Virtual Reality (VR) in the analysis of future interventions in the architecture of the city of Belém. The objective was the virtual reconstruction of part of the port area of the city, as it was about 100 years. The methods include a historical survey of the site, visits to obtain photographs and measurements, as well as the digital reconstruction of buildings (external faces only). The experiment used Sketchup software for modeling, Unity 3D for rendering and navigation, and HTC Vive glasses for immersion.
keywords	Virtual reality; Architecture; History; Engine games
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1424
id	sigradi2018_1424
authors	Ribeiro Carvalho, Diogo; Vieira Deiró, Taynara
year	2018
title	Architects and refugee camps: a case study for bottom-up approaches
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1227-1232
summary	The United Nations High Commissioner for Refugees (UNHCR) defines "refugees" as people forced to leave their country because of armed conflict, widespread violence and massive human rights violations. This paper presents and discusses a methodology for implementing a refugee camp in the context of the migration of southern Sudanese to Uganda. The proposal involves an intersection between 3D printing technology of LDM (Liquid Deposition Modeling) process, using soil as the main input, and participatory bottom-up processes in order to promote gradual technical and creative autonomy, sense of community and mental health of these people.
keywords	Architecture; Refugee camps; Humanitarian design; Digital fabrication; Bottom-up approaches
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	caadria2018_197
id	caadria2018_197
authors	Rogers, Jessie, Schnabel, Marc Aurel and Lo, Tian Tian
year	2018
title	Digital Culture - An Interconnective Design Methodology Ecosystem
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 493-502
doi	https://doi.org/10.52842/conf.caadria.2018.1.493
summary	Transitioning away from traditional design methodology, for example, paper sketching, CAAD works, and 'flat screen' rendering, this paper proposes a new methodological ecosystem of which tests its validity within a studio-based case study. The focus will prove whether dynamic implementation and interconnectivity of evolving design tools can create richness and complexity of a design outcome through arbitrary phases of a generative design methodology ecosystem. Processes tested include combinations of agent simulations, artistic image processing analysis, site photogrammetry, 3D immersive sketching both abstract and to site-scale, parametric design generation, and virtual reality style presentations. Enhancing the process of design with evolving techniques in a generative way which dynamically interconnects will stimulate a digital culture of design generation that includes new aspects of interest and introduces innovative opportunities within all corners of the architectural realm. Methodology components within this ecosystem of interaction prove that the architecture cannot be as rich and complex without the utilisation of all strengths within each unique design tool.
keywords	Methodology Ecosystem; Simulation; Immersive; Virtual Reality; Photogrammetry
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaaderis2018_107
id	ecaaderis2018_107
authors	Ardavani, Olympia, Zerefos, Stelios and Doulos, Lambros
year	2018
title	Predicting the effect of bio-luminescent plants for reducing energy consumption in urban environments
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 59-64
keywords	The present paper is part of an ongoing research that deals with the inclusion of the effect of bio-luminescence as a substitute or complimentary light source in urban environments, with the main scope of reducing energy consumption for lighting in exterior areas. The paper discusses the selection of genetically modified transgenic plants for use in the climate of Greece and through bibliographic reference and preliminary experiments the modeling of a simulated light source that has the bio-luminescent properties of a specific plant. The modeled light source can then be used in lighting simulation software. Results, through the lighting simulation of the modeled transgenic plant in a case study scenario, support the fact that bio-luminescent plants can be used as supporting lighting agents in a suburban setting and eventually reduce energy consumption for lighting.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ijac201816305
id	ijac201816305
authors	Patt, Trevor Ryan
year	2018
title	Multiagent approach to temporal and punctual urban redevelopment in dynamic, informal contexts
source	International Journal of Architectural Computing vol. 16 - no. 3, 199-211
summary	This article presents design research speculating on computationally enabled planning approaches for urban sites where informal developments make conventional masterplans ineffectual. The project advances the thesis that the spatial complexity of urban sites can be effectively studied through a network or mesh representation and that rapid change in informal settlements is not an obstacle to planned redevelopment but can be addressed through dynamic modeling and punctual interventions. In this way, the rapid turnover of the built environment can be a mechanism through which to introduce directed planning without canceling out bottom-up actions. In the case study presented, we use a multiagent approach that is able to adapt to a continuously changing context. The agents are driven by weighted random walks and compute localized analyses of the morphology of the network of public space as they move. The information generated by the multiagent simulation is aggregated to identify potential modifications to the urban fabric, with an emphasis on pedestrian connectivity.
keywords	Adaptive planning, multiagent systems, urban morphology, network analysis, spectral clustering, informal urbanism, generative design, participatory frameworks
series	journal
email
last changed	2019/08/07 14:03

_id	ecaade2018_123
id	ecaade2018_123
authors	Loos, Lennert and De Laet, Lars
year	2018
title	A Structurally Informed Design Process by Real-time Data Visualisations
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 687-696
doi	https://doi.org/10.52842/conf.ecaade.2018.1.687
summary	This paper will discuss data visualisation in structural engineering for comparing design alternatives. By having the structural information of all different design proposals at hand, the designer is able to make informed design decisions. The authors developed a tool for creating interactive graphs while designing structures in a parametric design environment. In this work a case study of different structural design alternatives of a stadium roof is presented. Based on this design case, some graphs and the new informed design approach will be explained. Also the implementation of the tool within a parametric design environment with its advantages and issues is discussed.
keywords	Data visualisation; Computer-aided design; Decision making; Structural design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2023_362
id	caadria2023_362
authors	Luo, Jiaxiang, Mastrokalou, Efthymia, Aldabous, Rahaf, Aldaboos, Sarah and Lopez Rodriguez, Alvaro
year	2023
title	Fabrication of Complex Clay Structures Through an Augmented Reality Assisted Platform
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 413–422
doi	https://doi.org/10.52842/conf.caadria.2023.1.413
summary	The relationship between clay manufacturing and architectural design has a long trajectory that has been explored since the early 2000s. From a 3D printing or assembly perspective, using clay in combination with automated processes in architecture to achieve computational design solutions is well established. (Yuan, Leach & Menges, 2018). Craft-based clay art, however, still lacks effective computational design integration. With the improvement of Augmented Reality (AR) technologies (Driscoll et al., 2017) and the appearance of digital platforms, new opportunities to integrate clay manufacturing and computational design have emerged. The concept of digitally transferring crafting skills, using holographic guidance and machine learning, could make clay crafting accessible to more workers while creating the potential to share and exchange digital designs via an open-source manufacturing platform. In this context, this research project explores the potential of integrating computational design and clay crafting using AR. Moreover, it introduces a platform that enables AR guidance and the digital transfer of fabrication skills, allowing even amateur users with no prior making experience to produce complex clay components.
keywords	Computer vision, Distributed manufacturing, Augmented craftsmanship, Augmented reality, Real-time modification, Hololens
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ecaade2018_285
id	ecaade2018_285
authors	Tsikoliya, Shota, Vasko, Imrich, Miškovièová, Veronika, Olontsev, Ivan and Kovaøík, David
year	2018
title	Programmable Bending - grain-informed simulation and design
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 309-316
doi	https://doi.org/10.52842/conf.ecaade.2018.2.309
summary	The project investigates the potential of programmable bending - a strategy, which informs bending simulations of multilayered veneer elements with the data of its anisotropic grain structure. Project further examines the possibilities of using these irregular material characteristics as a design driver. The project questions the possibility of informing the design with the particular characteristics of the material structure and of creating complex geometries from non-customized or minimally customizes mass-produced elements. Project develops a workflow, in which a two-dimensional scan of the material is transformed into a vector field and consequently into a mesh with variable stiffness characteristics. The stiffness of each edge within a mesh was calculated basing on an angle between this edge and the relevant vector within a vector-field. That resulted in realistic simulation, which differentiated bending characteristics along the grain and perpendicular to the grain. Uneven connection of several layers of active-bended veneer allows to accumulate local stresses and pre-program bending characteristics of the structure. As a result active-bended structure forms particular predefined and predesigned shape and possesses locally variable stiffness and flexibility. The project applies this strategy to the design of the pavilion located within the urban context of a public space.
keywords	programmable bending; grain-informed simulation; veneer; computational design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
doi	https://doi.org/10.52842/conf.acadia.2018.216
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

For more results click below: