Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 626

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaaderis2018_107
id	ecaaderis2018_107
authors	Ardavani, Olympia, Zerefos, Stelios and Doulos, Lambros
year	2018
title	Predicting the effect of bio-luminescent plants for reducing energy consumption in urban environments
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 59-64
keywords	The present paper is part of an ongoing research that deals with the inclusion of the effect of bio-luminescence as a substitute or complimentary light source in urban environments, with the main scope of reducing energy consumption for lighting in exterior areas. The paper discusses the selection of genetically modified transgenic plants for use in the climate of Greece and through bibliographic reference and preliminary experiments the modeling of a simulated light source that has the bio-luminescent properties of a specific plant. The modeled light source can then be used in lighting simulation software. Results, through the lighting simulation of the modeled transgenic plant in a case study scenario, support the fact that bio-luminescent plants can be used as supporting lighting agents in a suburban setting and eventually reduce energy consumption for lighting.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	caadria2018_008
id	caadria2018_008
authors	Crolla, Kristof, Cheng, Paul Hung Hon, Chan, Ding Yuen Shan, Chan, Arthur Ngo Foon and Lau, Darwin
year	2018
title	Inflatable Architecture Production with Cable-Driven Robots
doi	https://doi.org/10.52842/conf.caadria.2018.1.009
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 9-18
summary	This paper argues for alternative methods for the in-situ integration of robotics in architectural construction. Rather than promoting off-site pre-fabrication through industrial robot applications, it advocates for suspended, light-weight, cable-driven robots that allow flexible and safe onsite implementation. This paper uses the topic of large-scale inflatable architectural realisation as a study case to test the application of such a robot, here with a laser-cutter as end-effecter. This preliminary study covers the design, development, prototyping, and practical testing of an inherently scale-less cable-driven laser-cutter setup. This setup allows for the non-size specific cutting of inflatable structures' components which can be designed with common physics simulation engines. The developed robotic proof of concept forms the basis for several further and future study possibilities that merge the field of architectural design and implementation with mechanical and automation engineering.
keywords	Cable-driven robots; In-situ robotic fabrication; Large-scale fabrication; Inflatable architecture; Cross-disciplinarily
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_314
id	ecaade2018_314
authors	Gheorghe, Andrei, Hornung, Philipp, Reiss, Sigurd and Vierlinger, Robert
year	2018
title	Architecture Challenge 16 - Robotic Contouring - Researching Robotic Bending of Straight Profile Plastic Beams for Full Scale Production
doi	https://doi.org/10.52842/conf.ecaade.2018.1.165
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 165-172
summary	This paper provides insight into a new robotic plastic forming process through the prototypical construction of a full scale structure. The process explored the potential development of an automated setup, which utilizes robotic movement to create three-dimensional components from straight profile plastic beams. Polyethylene beams with a rectangular profile were bent with the help of an infrared heating ring and a 6 axis robotic arm. The digital process with custom-created Rhino/Grasshopper components allows the creation of forms with a high degree of customization in relation to the needed construction time, therefore providing for a highly flexible and quickly developable structural formwork without the need of a mold.
keywords	plastic beams forming; 6 axis robotic fabrication; profile contouring; computational optimization; structural formwork; light weight structures
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia18_226
id	acadia18_226
authors	Glynn, Ruairi; Abramovic, Vasilija; Overvelde, Johannes T. B.
year	2018
title	Edge of Chaos. Towards intelligent architecture through distributed control systems based on Cellular Automata.
doi	https://doi.org/10.52842/conf.acadia.2018.226
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 226-231
summary	From the “Edge of Chaos”, a mathematical space discovered by computer scientist Christopher Langton (1997), compelling behaviors originate that exhibit both degrees of organization and instability creating a continuous dance between order and chaos. This paper presents a project intended to make this complex theory tangible through an interactive installation based on metamaterial research which demonstrates emergent behavior using Cellular Automata (CA) techniques, illustrated through sound, light and motion. We present a multi-sensory narrative approach that encourages playful exploration and contemplation on perhaps the biggest questions of how life could emerge from the disorder of the universe. We argue a way of creating intelligent architecture, not through classical Artificial Intelligence (AI), but rather through Artificial Life (ALife), embracing the aesthetic emergent possibilities that can spontaneously arise from this approach. In order to make these ideas of emergent life more tangible we present this paper in four integrated parts, namely: narrative, material, hardware and computation. The Edge of Chaos installation is an explicit realization of creating emergent systems and translating them into an architectural design. Our results demonstrate the effectiveness of a custom CA for maximizing aesthetic impact while minimizing the live time of architectural kinetic elements.
keywords	work in progress, complexity, responsive architecture, distributed computing, emergence, installation, interactive architecture, cellular automata
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	caadria2018_302
id	caadria2018_302
authors	Lee, Alric, Tei, Hirokazu and Hotta, Kensuke
year	2018
title	Body-Borne Assistive Robots for Human-Dependent Precision Construction - The Compensation of Human Imprecision in Navigating 3-Dimensional Space with a Stand-Alone, Adaptive Robotic System
doi	https://doi.org/10.52842/conf.caadria.2018.1.545
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554
summary	The rapid growth of complex contemporary architecture design, contributed by the advance in parametric CAD/CAM software, is accompanied by challenges in the production process; it demands both highly trained workers and technical equipments. This paper reviews current technologies in robotics-aided construction and wearable computers for generic purposes, and proposes the design of a robotic device for construction guidance. It guides the user, the worker, through the assembly process of precision modular constructions, by providing procedural mechanical or haptic assistance in the 3-dimensional positioning of building components. The device is designed to be wearable, portable, and operable as a completely stand-alone system that requires no external infrastructure. A prototype of the device is tested with a mock-up masonry construction experiment, the result of which is reported in this paper, along with discussion for future improvement and application opportunities within the context of highly developed, condensed Japanese urban environments. A greater objective of this paper is to bridge current studies in Human-Computer Interaction (HCI) and digital fabrication in architecture and promote the potentials of human workers in future construction scenes.
keywords	digital fabrication; human-computer interaction; 3d positioning; wearable robotics; guided construction
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2018_373
id	ecaade2018_373
authors	Lee, Sang and Holzheu, Stefanie
year	2018
title	Theatrical Performance as Experimental Architecture
doi	https://doi.org/10.52842/conf.ecaade.2018.1.589
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 589-594
summary	This paper discusses by way of the authors' recent projects how improvised live dance performance, architectonic composition, and sensing technology converge and inform new opportunities in architectural experimentation. We first lay out the theoretical basis of technology in architectural experimentation in "new rationalities" of technologically augmented aesthetic work. We then briefly describe two projects, X-Change Room and RaumSubsTANZ and the motives behind them. X-Change Room deals with /non-verbal/ ambient display of information and interaction through envelope threshold. RaumSubsTANZ, a short interactive dance composition that highlights the ephemerality of architectural composition augmented by interaction devices. Through the two small projects we attempt to explore a specific technological milieu and reflect on the potentials and challenges of experimentation in architectural composition. The paper presents design methods and techniques that incorporate theories of perception and semiotics by way of an umbrella concept, "ambient displays" and interactive composition. Ultimately, we explore non-verbal communication and theatrical performance as architectural informant that augments semiosis and cognition that pertains to the role of technology at the intersection of primordial senses, cerebral technology, and place-making.
keywords	Ambient; Bauhaus; Cybernetics; Sensors; Society; Theater
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2018_1677
id	sigradi2018_1677
authors	Machado Fagundes, Cristian Vinicius; Duarte Costa, Cauê; Pinto da Silva, Fábio; Miotto Bruscato, Underléa
year	2018
title	Facade hollow brick (cobogó) 3D scanning: natural light admission analysis and comparison with original digital 3D model.
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 596-601
summary	The cobogó is a hollow brick used for light and ventilation control, besides having an important aesthetic function. With computer graphics, 3d digital models can be used during the design process to verify these functions. Thus, the goal of this paper is to compare and analyze the different digital 3D models obtained (built virtually or through 3D scanning) of a cobogó existing in the Brazilian market, so that visual and lighting differences can be observed, and how these differences can impact the design process.
keywords	3D Scanning; Parametric Design; Climatic Analysis; 3D model
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_198
id	caadria2018_198
authors	Reinhardt, Dagmar, Candido, Christhina, Cabrera, Densil, Wozniak-O'Connor, Dylan, Watt, Rodney, Bickerton, Chris, Titchkosky, Ninotschka and Houda, Maryam
year	2018
title	Onsite Robotic Fabrication for Flexible Workspaces - Towards Design and Robotic Fabrication of an Integrated Responsive Ceiling System for A Workspace Environment
doi	https://doi.org/10.52842/conf.caadria.2018.1.059
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 59-68
summary	Open, flexible workspaces were introduced decades ago, but architectural design approaches to ceiling systems have not changed substantially. This paper discusses the development of strategies and prototypes for a lightweight, integrated ceiling structure that is robotically woven. Through geometrically complex, fibre-reinforced building elements that are produced onsite, a new distribution system for data and light can be provided and support individual and multi-group collaborations in an contemporary open-plan office for maximum flexibility. The paper introduces applied design research with case studies that test robotic weaving on an architectural ceiling. The second part contextualises the presented work by linking it to workspace scenarios and an on-site robotic process with a resulting data distribution that is designed to produce degrees of freedom for high flexibility in use, allowing occupants to organise the workspace layout autonomously so that workflow constellations in different teams can be adequately expressed through space. The paper concludes with a discussion of a framework for robotic methods developed for the carbon-fibre overhead weaving processes, followed by conclusions and outlook towards future potentials.
keywords	open collaborative workspace; robotic onsite weaving; carbon fiber; integrated ceiling systems
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia19_606
id	acadia19_606
authors	Russo, Rhett
year	2019
title	Lithophanic Dunes: The Dunejars
doi	https://doi.org/10.52842/conf.acadia.2019.606
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 606-615
summary	The design of masonry, tile, and ceramics is an integral part of architectural history. High fired clays are unique in that they are amorphous, vitreous, and translucent. Similar types of light transmission through minerals and clays has been achieved in window panes using alabaster or marble, but unlike porcelain these cannot be cast, and they are susceptible to moisture. Additionally, glass and metal are commonly used to glaze ceramics, and this provides further possibility for the combination of translucency with surface ornamentation and decaling. It is within this architectural lineage, of compound stone and glass objects, that the Dunejars are situated. The Dunejars are translucent porcelain vessels that are designed as lenses to transmit different wavelengths of light into intricate and unexpected patterns. Similar recipes for porcelain were developed using wax positives during the 19th century to manufacture domestic Lithophanes; picturesque screens made of translucent porcelain, often displayed in windows or produced as candle shades (Maust 1966). The focus of the research involves pinpointing the lithophanic qualities of the clay so that they can be repeated by recipe, and refined through a digital workflow. The methods outlined here are the product of an interdisciplinary project residency at The European Ceramic Workcenter (Sundaymorning@EKWC) in 2018 to make tests, and obtain technical precision in the areas of, plaster mold design, slip-casting, finishing, firing, and glazing of the Dunejars. The modular implementation of these features at the scale of architecture can be applied across a range of scales, including fixtures, finishes and envelopes, all of which merit further investigation.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia18_444
id	acadia18_444
authors	Sabin, Jenny; Pranger, Dillon; Binkley, Clayton; Strobel, Kristen; Liu, Jingyang (Leo)
year	2018
title	Lumen
doi	https://doi.org/10.52842/conf.acadia.2018.444
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 444-455
summary	This paper documents the computational design methods, digital fabrication strategies, and generative design process for Lumen, winner of MoMA & MoMA PS1’s 2017 Young Architects Program. The project was installed in the courtyard at MoMA PS1 in Long Island City, New York, during the summer of 2017. Two lightweight 3D digitally knitted fabric canopy structures composed of responsive tubular and cellular components employ recycled textiles, photo-luminescent and solar active yarns that absorb and store UV energy, change color, and emit light. This environment offers spaces of respite, exchange, and engagement as a 150 x 75-foot misting system responds to visitors’ proximity, activating fabric stalactites that produce a refreshing micro-climate. Families of robotically prototyped and woven recycled spool chairs provide seating throughout the courtyard. The canopies are digitally fabricated with over 1,000,000 yards of high tech responsive yarn and are supported by three 40+ foot tensegrity towers and the surrounding matrix of courtyard walls. Material responses to sunlight as well as physical participation are integral parts of our exploratory approach to the 2017 YAP brief. The project is mathematically generated through form-finding simulations informed by the sun, site, materials, program, and the material morphology of knitted cellular components. Resisting a biomimetic approach, Lumen employs an analogic design process where complex material behavior and processes are integrated with personal engagement and diverse programs. The comprehensive installation was designed by Jenny Sabin Studio and fabricated by Shima Seiki WHOLEGARMENT, Jacobsson Carruthers, and Dazian with structural engineering by Arup and lighting by Focus Lighting.
keywords	full paper, materials & adaptive systems, digital fabrication, flexible structures, performance + simulation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2018_370
id	ecaade2018_370
authors	Abdelmohsen, Sherif, Massoud, Passaint, El-Dabaa, Rana, Ibrahim, Aly and Mokbel, Tasbeh
year	2018
title	A Computational Method for Tracking the Hygroscopic Motion of Wood to develop Adaptive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2018.2.253
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 253-262
summary	Low-cost programmable materials such as wood have been utilized to replace mechanical actuators of adaptive architectural skins. Although research investigated ways to understand the hygroscopic response of wood to variations in humidity levels, there are still no clear methods developed to track and analyze such response. This paper introduces a computational method to analyze, track and store the hygroscopic response of wood through image analysis and continuous tracking of angular measurements in relation to time. This is done through a computational closed loop that links the smart material interface (SMI) representing hygroscopic response with a digital and tangible interface comprising a Flex sensor, Arduino kit, and FireFly plugin. Results show no significant difference between the proposed sensing mechanism and conventional image analysis tracking systems. Using the described method, acquiring real-time data can be utilized to develop learning mechanisms and predict the controlled motion of programmable material for adaptive architectural skins.
keywords	Hygroscopic properties of wood; Adaptive architecture; Programmable materials; Real-time tracking
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia22pr_124
id	acadia22pr_124
authors	Ago, Viola; Tursack, Hans
year	2022
title	Understorey - A Pavilion in Parts
source	ACADIA 2022: Hybrids and Haecceities [Projects Catalog of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-7-4]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 124-129.
summary	In the summer of 2018, our collaboration was awarded a University Design Fellowship from the Exhibit Columbus organization to design, fabricate, and build a large pavilion in Columbus, Indiana as part of a biannual contemporary architecture exhibition. Our proposal for the competition was a pavilion that would double as an ecological education center. Our inspiration for this program was triggered in part by our reading of Jane Bennett’s materialist philosophy outlined in her book Vibrant Matter (2009). Through Bennett’s lens, our design rendered our site’s context as an animate field, replete with pre-existing material composites that we wanted to celebrate through a series of displays, information boards, and artificial lighting. In this, the installation would feature samples of local plants, minerals, and rocks, indigenous to Southern Indiana.
series	ACADIA
type	project
email
last changed	2024/02/06 14:06

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_389
id	ecaade2018_389
authors	Algeciras-Rodriguez, Jose
year	2018
title	Stochastic Hybrids - From references to design options through Self-Organizing Maps methodology.
doi	https://doi.org/10.52842/conf.ecaade.2018.1.119
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 119-128
summary	This ongoing research aims to define a general assisted design method to offer non-trivial design options, where form is produced by merging characteristics from initial reference samples collection that serves as an input set. This project explores design processes laying on the use of non-linear procedures and experiments with Self-Organizing Map (SOM), as neural networks algorithms, to generate geometries. All processes are applied to a set of models representing classic sculpture, whose characteristics are encoded by the SOM process. The result of it is a set of new geometry resembling characteristics from the original references. This method produces hybrid forms that acquire characteristics from several input references. The resulting hybrid entities are intended to be non-trivial solutions to specific design situations, so far, at the stage of this research, mainly formal requirements.
keywords	Self-Orgnizing Maps; Cognitive Space; Design Options; Form Finding; Artificial Intelligence
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1484
id	sigradi2018_1484
authors	Alves de Oliveira, Amanda Aline; Sakurai, Tatiana
year	2018
title	The transformations of the "Do-It-Yourself" culture and the context provided by digital manufacturing in furniture design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1258-1263
summary	This article seeks to deal with the evolution of the DIY culture during its most important periods for the history of furniture and confers great importance to the present reality that provides the constitution of these artifacts through digital manufacturing. Thus, issues such as the quality of what has been produced and even the relevance of design professionals of the culture of making in the digital era are treated.
keywords	DIY; Digital fabrication; Furniture; Fab Labs Livres SP
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
doi	https://doi.org/10.52842/conf.acadia.2018.312
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_124
id	ecaade2018_124
authors	Asanowicz, Aleksander
year	2018
title	Digital Architectural Composition in Virtual Space
doi	https://doi.org/10.52842/conf.ecaade.2018.2.703
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 703-710
summary	The paper is divided into two main parts. The first part refers to the history of attempts to use VR technology in the process of architectural space creation in a dynamic way. The second part presents the experiment carried out at our Faculty, in which we implemented VR in the Digital Architectural Composition course. This experiment was divided into two parts. In the both parts Google Blocks software was used. In the first part we have used the first exercises which was completed by students during the first semester in a traditional way (a cardboard mock-up) and then in the third semester as a digital model in Cinema 4D. It was a Solid form with. In the second part of this experiment we asked students to create a sketch of walk through space and they can created their own shapes in their design. The analysis of the results allows to formulate the thesis that there is a qualitative revolution in the area of human-computer interface. The main conclusion is that Virtual Reality eliminates the boundaries between the spectator and the space and that the idea - Designing Become a Place" is still actual.
keywords	Architectural composition; virtual reality; direct design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_219
id	ecaade2018_219
authors	Bai, Nan, Ye, Wenqia, Li, Jianan, Ding, Huichao, Pienaru, Meram-Irina and Bunschoten, Raoul
year	2018
title	Customised Collaborative Urban Design - A Collective User-based Urban Information System through Gaming
doi	https://doi.org/10.52842/conf.ecaade.2018.1.419
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 419-428
summary	As we step into a new data-based information age, it is important to get citizens involved in the whole design process. Our research tries to build up a user-based urban information system by collecting the data of neighborhood land use preference from all the residents through gaming. The result of each individual decision will be displayed in real time using Augmented Reality technology, while the collective decision dataset will be stored, analyzed and learnt by computer, forming an optimal layout that meets the highest demand of the community. A pre-experiment has been conducted in a. an abstract virtual site and b. an existing site by collecting opinions from 122 participants, which shows that the system works well as a new method for collaborative design. This system has the potential to be applied both in realistic planning processes, as a negotiation toolkit, and in virtual urban forming, in the case of computer games or space colonization.
keywords	Collaborative Design; Customization; Urban Design; Gaming; Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_377
id	ecaade2018_377
authors	Beaudry Marchand, Emmanuel, Dorta, Tomás and Pierini, Davide
year	2018
title	Influence of Immersive Contextual Environments on Collaborative Ideation Cognition - Through design conversations, gestures and sketches
doi	https://doi.org/10.52842/conf.ecaade.2018.2.795
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 795-804
summary	In the design studio, Virtual Reality (VR) has mainly been included as a visualization tool to explore pre-designed ideas developed in traditional 3D software or using pen on paper. Meanwhile, a reshaping of the design process has been taking place, bringing forward interaction/experiential concerns and co-design approaches throughout disciplines in a push for a more thorough consideration of projects' contexts. This paper reports an exploratory study of how immersive contextual representations influence the co-ideation process. Audio-video recordings of co-ideation sessions (9) from a pedagogical studio were analyzed through verbal and representational (sketches and design gestures) exchanges as occurring in three different conditions: (a) pen on paper, immersive headset-free VR (b) without, and (c) with the use of contextual immersive environment (photogrammetric scans and 3D models). Results show that, although design conversations were similar across all conditions, design gestures were more often directly related to- than independent from the graphical representation only when using an immersive contextual environment. Furthermore, the rate of sketching episodes in general and sketching explanations were considerably lower in this condition. This could imply that use of pre-made context greatly reduces the need of sketching elements to support a clearer co-ideation.
keywords	Immersive context; Design gestures; Design conversations; Sketches; Co-design studio; Design cognition
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: