Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2018_1519
id	sigradi2018_1519
authors	Lemus Villagómez, Renato Arturo; Lobato Valdespino, Juan Carlos
year	2018
title	Temporary shelter design from a digital-analog design process: Habitable emergent solution for operational resilience
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1264-1271
summary	This work proposes an emerging habitable solution for families with children receiving attention in a public hospital, which do not include a shelter service for them. In this case of study, an informal settlement has grown for years in the surroundings of the hospital. The phenomenon is identified and analyzed, the variables activating the resilience systems and the self-organization capacities of those affected, to generate alternative solutions within an evolved vision that improve the emotional and habitability conditions of the families living in the settlement. The methodological process is composed of five stages: Diagnosis, analysis-synthesis, design determinants and design alternatives.
keywords	Shelter; Emergence; Resilient; Design, Fab-Lab
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_162
id	ecaade2018_162
authors	Alkadri, Miktha, Turrin, Michela and Sariyildiz, Sevil
year	2018
title	Toward an Environmental Database - Exploring the material properties from the point cloud data of the existing environment
doi	https://doi.org/10.52842/conf.ecaade.2018.2.263
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 263-270
summary	The utilization of point cloud as a 3D laser scanning product has reached across multi-disciplines in terms of data processing, data visualization, and data analysis. This study particularly investigates further the use of typical attributes of raw point cloud data consisting of XYZ (position information), RGB (colour information) and I (intensity information). By exploring the optical and thermal properties of the given point cloud data, it aims at compensating the material and texture information that is usually remained behind by architects during the conceptual design stage. Calculation of the albedo, emissivity and the reflectance values from the existing context specifically direct the architects to predict the type of materials for the proposed design in order to keep the balance of the surrounding Urban Heat Island (UHI) effect. Therefore, architects can have a comprehensive analysis of the existing context to deal with the microclimate condition before a design decision phase.
keywords	point cloud data; material characteristics; albedo; emissivity; reflectance value
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia18_36
id	acadia18_36
authors	Austin, Matthew; Matthews, Linda
year	2018
title	Drawing Imprecision. The digital drawing as bits and pixels
doi	https://doi.org/10.52842/conf.acadia.2018.036
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 36-45
summary	This paper explores the consequences of digitizing the architectural drawing. It argues that the fundamental unit of drawing has shifted from “the line” to an interactive partnership between bits and pixels. It also reveals how the developmental focus of imaging technology has been to synthesize and imitate the line using bits and pixels, rather than to explore their innate productive value and aesthetic potential. Referring to variations of the architectural drawing from a domestic typology, the paper uses high-precision digital tools tailored to quantitative image analysis and digital tools that sit outside the remit of architectural production, such as word processing, to present a new range of drawing techniques. By applying a series of traditional analytical procedures to the image, it reveals how these maneuvers can interrogate and dislocate any predetermined formal normalization. The paper reveals that the interdisciplinary repurposing of precise digital toolsets therefore has explicit disciplinary consequences. These arise as a direct result of the recalibration of scale, the liberation of the bit’s representational capacity, and the pixel’s properties of color and brightness. It concludes by proposing that deliberate instances of translational imprecision are highly productive, because by liberating the fundamental qualitative properties of the fundamental digital units, these techniques shift the disciplinary agency of the architectural drawing
keywords	full paper, imprecision, representation, recalibration, theory, glitch aesthetics, algorithmic design, process
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_405
id	ecaade2018_405
authors	Belém, Catarina and Leit?o, António
year	2018
title	From Design to Optimized Design - An algorithmic-based approach
doi	https://doi.org/10.52842/conf.ecaade.2018.2.549
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 549-558
summary	Stringent requirements of efficiency and sustainability lead to the demand for buildings that have good performance regarding different criteria, such as cost, lighting, thermal, and structural, among others. Optimization can be used to ensure that such requirements are met. In order to optimize a design, it is necessary to generate different variations of the design, and to evaluate each variation regarding the intended criteria. Currently available design and evaluation tools often demand manual and time-consuming interventions, thus limiting design variations, and causing architects to completely avoid optimization or to postpone it to later stages of the design, when its benefits are diminished. To address these limitations, we propose Algorithmic Optimization, an algorithmic-based approach that combines an algorithmic description of building designs with automated simulation processes and with optimization processes. We test our approach on a daylighting optimization case study and we benchmark different optimization methods. Our results show that the proposed workflow allows to exclude manual interventions from the optimization process, thus enabling its automation. Moreover, the proposed workflow is able to support the architect in the choice of the optimization method, as it enables him to easily switch between different optimization methods.
keywords	Algorithmic Design; Algorithmic Analysis; Algorithmic Optimization; Lighting optimization; Black-Box optimization
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2023_39
id	sigradi2023_39
authors	Borges, Marina, Karantino, Lucas and Gorges, Diego
year	2023
title	Walkability: Digital Parametric Process for Analyzing and Evaluating Walkability Criteria in Peripheral Central Regions of Belo Horizonte
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 397–408
summary	According to one of the Sustainable Development Goals (UN, 2018), it is important for cities to be inclusive, safe, resilient, and sustainable. Therefore, it is necessary to value pedestrians and consequently active mobility, giving priority to the concepts of the Transportation Oriented Development (TOD) methodology. Although the Master Plan (BELO HORIZONTE, 2019) proposes that areas located in regional centralities are enhancing active mobility, can residents actually benefit from these resources at a walkable distance to access basic services? Thus, the aim of this research is to utilize digital technologies to visualize, analyze, and assess pedestrians' access conditions to commerce and basic services, identifying areas lacking infrastructure. The goal is for the model to serve as a reference for the development of public policies. To achieve this, metadata was used for parametric modeling to study walkability in the peripheral region of the city of Belo Horizonte.
keywords	Walkability, Urban Data Analysis, Urban Design, Parametric Urbanism, Algorithmic Logic
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	ecaade2018_164
id	ecaade2018_164
authors	Chang, Mei-Chih, Buš, Peter, Tartar, Ayça, Chirkin, Artem and Schmitt, Gerhard
year	2018
title	Big-Data Informed Citizen Participatory Urban Identity Design
doi	https://doi.org/10.52842/conf.ecaade.2018.2.669
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 669-678
summary	The identity of an urban environment is important because it contributes to self-identity, a sense of community, and a sense of place. However, under present-day conditions, the identities of expanding cities are rapidly deteriorating and vanishing, especially in the case of Asian cities. Therefore, cities need to build their urban identity, which includes the past and points to the future. At the same time, cities need to add new features to improve their livability, sustainability, and resilience. In this paper, using data mining technologies for various types of geo-referenced big data and combine them with the space syntax analysis for observing and learning about the socioeconomic behavior and the quality of space. The observed and learned features are identified as the urban identity. The numeric features obtained from data mining are transformed into catalogued levels for designers to understand, which will allow them to propose proper designs that will complement or improve the local traditional features. A workshop in Taiwan, which focuses on a traditional area, demonstrates the result of the proposed methodology and how to transform a traditional area into a livable area. At the same time, we introduce a website platform, Quick Urban Analysis Kit (qua-kit), as a tool for citizens to participate in designs. After the workshop, citizens can view, comment, and vote on different design proposals to provide city authorities and stakeholders with their ideas in a more convenient and responsive way. Therefore, the citizens may deliver their opinions, knowledge, and suggestions for improvements to the investigated neighborhood from their own design perspective.
keywords	Urban identity; unsupervised machine learning; Principal Component Analysis (PCA); citizen participated design; space syntax
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_301
id	ecaade2018_301
authors	Cocho-Bermejo, Ana, Birgonul, Zeynep and Navarro-Mateu, Diego
year	2018
title	Adaptive & Morphogenetic City Research Laboratory
doi	https://doi.org/10.52842/conf.ecaade.2018.2.659
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 659-668
summary	"Smart City" business model is guiding the development of future metropolises. Software industry sales to town halls for city management services efficiency improvement are, these days, a very pro?table business. Being the model decided by the industry, it can develop into a dangerous situation in which the basis of the new city design methodologies is decided by agents outside academia expertise. Drawing on complex science, social physics, urban economics, transportation theory, regional science and urban geography, the Lab is dedicated to the systematic analysis of, and theoretical speculation on, the recently coined "Science of Cities" discipline. On the research agenda there are questions arising from the synthesis of architecture, urban design, computer science and sociology. Collaboration with citizens through inclusion and empowerment, and, relationships "City-Data-Planner-Citizen" and "Citizen-Design-Science", configure Lab's methodology provoking a dynamic responsive process of design that is yet missing on the path towards the real responsive city.
keywords	Smart City; Morphogenetic Urban Design; Internet of Things; Building Information Modelling; Evolutionary Algorithms; Machine Learning & Artificial Intelligence
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_255
id	ecaade2018_255
authors	Danesh, Foroozan, Baghi, Ali and Kalantari, Saleh
year	2018
title	Programmable Paper Cutting - A Method to Digitally Fabricate Transformable, Complex Structural Geometry
doi	https://doi.org/10.52842/conf.ecaade.2018.2.489
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 489-498
summary	This paper presents a computational approach to generating architectural forms for large spanning structures based on a "paper-cutting" technique. Using this approach, a flat sheet is cut and scored in such a way that a small application of force prompts it to expand into a three-dimensional structure. Our computational system can be used to estimate optimal cutting patterns and to predict the resulting structural characteristics, thereby providing greater rigor to what has previously been an ad-hoc and experimental design approach. To develop the model, we analyzed paper-cutting techniques, extracted the relevant formative parameters, and created a simulation using finite element analysis. We then used a data-mining approach through 400 simulations and applied a regression analysis to create a prediction model. Given a small number of input variables from the designer, this model can rapidly and precisely predict the transformation volume of a paper-cutting pattern. Additional structural characteristics will be modelled in future work. The use of this tool makes paper-cut design approaches more practical by changing a non-systematic, labor-intensive design process into a more precise and efficient one.
keywords	Paper-cut?; Transformable geometry; Design method; Model prediction; Data mining; Regression analysis
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2018_1762
id	sigradi2018_1762
authors	de Albuquerque Montezi, Rafael; Tanoue Vizioli, Simone Helena
year	2018
title	Digital morphogenesis and tectonics: an analysis of Peter Eisenman’s Aronoff Center
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 359-366
summary	The concept of architectural tectonics relates simultaneously to pragmatic and poetic aspects of the materiality, aiming the expression of these concerns in the result of the Form. Far from only a theoretical concerning, these design decisions affect how our society employs its natural and human resources. This work takes the Aronoff Center for Design and Arts (1988-1996), by Peter Eisenman, as a case study for a graphical analysis, dealing with the consequences of a free-form morphogenesis to its construction and investigating the tectonics of the contemporary architecture.
keywords	Contemporary Architecture; Digital Project; Tectonics
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ijac201816205
id	ijac201816205
authors	Faircloth,Billie; Ryan Welch, Martin Tamke, Paul Nicholas, Phil Ayres, Yulia Sinke, Brandon Cuffy and Mette Ramsgaard Thomsen
year	2018
title	Multiscale modeling frameworks for architecture: Designing the unseen and invisible with phase change materials
source	International Journal of Architectural Computing vol. 16 - no. 2, 104-122
summary	Multiscale design and analysis models promise a robust, multimethod, multidisciplinary approach, but at present have limited application during the architectural design process. To explore the use of multiscale models in architecture, we develop a calibrated modeling and simulation platform for the design and analysis of a prototypical envelope made of phase change materials. The model is mechanistic in nature, incorporates material-scale and precinct scale-attributes, and supports the design of two- and three-dimensional phase change material geometries informed by heat transfer phenomena. Phase change material behavior, in solid and liquid states, dominates the visual and numerical evaluation of the multiscale model. Model calibration is demonstrated using real-time data gathered from the prototype. Model extensibility is demonstrated when it is used by designers to predict the behavior of alternate envelope options. Given the challenges of modeling phase change material behavior in this multiscale model, an additional multiple linear regression model is applied to data collected from the physical prototype in order to demonstrate an alternate method for predicting the melting and solidification of phase change materials.
keywords	Multiscale modeling, mechanistic modeling, heat transfer modeling, phase change materials, model validation
series	journal
email
last changed	2019/08/07 14:03

_id	acadia18_98
id	acadia18_98
authors	Fox, Michael; Schulitz, Marc; Gershfeld, Mikhail; Cohen, Marc
year	2018
title	Full Integration: Closing the Gap on Technology Readiness
doi	https://doi.org/10.52842/conf.acadia.2018.098
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 98-107
summary	This paper discusses the authors’ experiences and lessons learned through designing and constructing small- and large-scale robotic prototypes and the fully integrated use of VR and AR for design. Also of focus here are the methodological tools utilized to implement this student-led research in an interdisciplinary educational environment, as well as the design explorations of Mars habitation systems. Through the systems engineering approach, students will generate ideas that may or may not make it to the final design development stage, but may potentially be valuable to future real exploration habitats and mission architectures. The final prototype allows an assessment of the focus parameters, which are the vessels’ transformation capacities and layout adaption. The design objective of this project is to examine strategies for commonality between an interplanetary vehicle (IPV) and a Mars surface habitat. The presented design proposals address this challenge to create a common habitation system in both habitats so that crew members will be familiar with the layout, function, and location throughout the expedition. The design tools operate at the intersection of architectural layout design, mechanics, and structural design, and use origami folding techniques and structural form-finding concepts to generate shell action rigidity. In addition, the project develops a strategy for mobility and transformation of the surface habitat prior to its transformed configuration. The value here lies in understanding lessons from this strategy for both the design process as well as efficiency and optimization in design as a model for terrestrial design.
keywords	full paper, bim, flexible structures, performance + simulation, representation + perception, building technologies, vr/ar/mr
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	ecaade2018_257
id	ecaade2018_257
authors	Guo, Zhe, Yin, Hao and Yuan, Philip F.
year	2018
title	Spatial Redesign Method Based on Behavior Data Visualization System - UWB interior positioning technology based office space redesign method research
doi	https://doi.org/10.52842/conf.ecaade.2018.2.577
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 577-584
summary	There is a typical symbiotic relationship between behavior and space. Design and evaluation of space are also inseparable from people's behavioral needs. Therefore, the study of behavior patterns can be regarded as the process of exploring the relationship between human and space. Traditional behavioral research lacks precise micro-individual data and analytical tools to express complex environments, and is more inclined to macro and qualitative static analysis. With the maturity of indoor positioning technology, the use of big data as a medium to quantitatively study the laws of behavior has gradually penetrated into the micro-level of indoor space. This paper begins with a brief introduction of the behavioral performance research process in history. The paper then describes the method that constructs the observation, quantification and visualization process of behavior data by using UWB positioning technology and visualization implementation system through an on-site experiment of office space. The last part of this paper discusses the establishment of spatial redesign method by mining the behavior data, and translating the results into spatial attributes.
keywords	behavior data visualization; UWB interior positioning technology; data mining; spatial redesign method
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaaderis2018_104
id	ecaaderis2018_104
authors	Hollberg, Alexander, Hildebrand, Linda and Habert, Guillaume
year	2018
title	Environmental design - Lessons learned from teaching LCA
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 65-74
keywords	Architects largely define the environmental impact a building will cause throughout its life cycle. Especially decisions taken in early design stages have a great influence on the environmental performance. The integration of environmental assessment into the design process requires adequate tools and basic knowledge of the architects using them. This paper discusses both aspects by means of two case studies with students. In both case studies, the goal was to use Life Cycle Assessment (LCA) to optimize the environmental performance of the building in the design process. The results of the first case study proved the benefits of using LCA-based information for decision-making, but some issues of using the tool during the design process became evident. In the second case study an improved LCA-tool was employed that proved to be applicable by all students. Nevertheless, only one group used the feedback to optimize the building design in an iterative process as intended by the supervisors. This leads to the conclusion that the difficulty of environmental design shifted from a lack of adequate assessment tools to the question of the design approach.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	acadia20_382
id	acadia20_382
authors	Hosmer, Tyson; Tigas, Panagiotis; Reeves, David; He, Ziming
year	2020
title	Spatial Assembly with Self-Play Reinforcement Learning
doi	https://doi.org/10.52842/conf.acadia.2020.1.382
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 382-393.
summary	We present a framework to generate intelligent spatial assemblies from sets of digitally encoded spatial parts designed by the architect with embedded principles of prefabrication, assembly awareness, and reconfigurability. The methodology includes a bespoke constraint-solving algorithm for autonomously assembling 3D geometries into larger spatial compositions for the built environment. A series of graph-based analysis methods are applied to each assembly to extract performance metrics related to architectural space-making goals, including structural stability, material density, spatial segmentation, connectivity, and spatial distribution. Together with the constraint-based assembly algorithm and analysis methods, we have integrated a novel application of deep reinforcement (RL) learning for training the models to improve at matching the multiperformance goals established by the user through self-play. RL is applied to improve the selection and sequencing of parts while considering local and global objectives. The user’s design intent is embedded through the design of partial units of 3D space with embedded fabrication principles and their relational constraints over how they connect to each other and the quantifiable goals to drive the distribution of effective features. The methodology has been developed over three years through three case study projects called ArchiGo (2017–2018), NoMAS (2018–2019), and IRSILA (2019-2020). Each demonstrates the potential for buildings with reconfigurable and adaptive life cycles.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia18_88
id	acadia18_88
authors	Jahn, Gwyllim; Newnham, Cameron; Beanland, Matthew
year	2018
title	Making in Mixed Reality. Holographic design, fabrication, assembly and analysis of woven steel structures
doi	https://doi.org/10.52842/conf.acadia.2018.088
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 88-97
summary	The construction industry’s reliance on two-dimensional documentation results in inefficiency, inconsistency, waste, human error, and increased cost, and limits architectural experimentation with novel form, structure, material or fabrication approaches. We describe a software platform that enables designers to create interactive holographic instructions that translate design models into intelligent processes rather than static drawings. A prototypical project to design and construct a pavilion from bent mild steel tube illustrates the use of this software to develop applications assisting with the design, fabrication, assembly and analysis of the structure. We further demonstrate that fabrication within mixed reality environments can enable unskilled construction teams to assemble complex structures in short time frames and with minimal errors, and outline possibilities for further improvements.
keywords	full paper, vr/ar/mr, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2018_169
id	ecaade2018_169
authors	Kasahara, Maki, Matsushita, Kiwa and Mizutani, Akihiro
year	2018
title	Learning from Generative Design System in the 60's - Case Study of Agricultural City Project by Kisho Kurokawa
doi	https://doi.org/10.52842/conf.ecaade.2018.2.095
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 95-102
summary	The concept of generative design in Architecture and Urbanism can be found in the 60's before the wide availability of computer technology. This paper decodes one of the urban projects by Metabolist in 1960, which was intended to be a generative system applicable to other sites and evolves over time. Through our analysis, we de-code the formulation process, and verified our hypothesis by re-coding into the program using the software, Rhinoceros and Grasshopper. We found that the determinate factors rule more at the macro level of the project, but the parameters are set by taking the local conditions into account. At the micro level, the system leaves more freedom to accommodate various needs, reflecting the philosophy of the Metabolists. The investigation on this historical predecessor can provide useful insights for parameter settings in future generative system design.
keywords	Generative Design; Grasshopper; Kisho Kurokawa
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaaderis2018_112
id	ecaaderis2018_112
authors	Kontovourkis, Odysseas and Konatzii, Panagiota
year	2018
title	Design-static analysis and environmental assessment investigation based on a kinetic formwork-driven by digital fabrication principles
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 131-140
keywords	This research focuses on design-static analysis and environmental assessment procedures that are based on the idea of a flexible kinetic formwork used as the automated mechanism for the production of bricks for porous wall structures. A key aspect of this investigation is the Life Cycle Assessment (LCA) analysis study that is applied in order to achieve, in parallel with the automated procedure, the sustainable potential of the products. For this purpose, the design and construction flexibility of the product is taken into account from the early design decision making stage by examining different sizes of bricks under fabrication including massive or porous ones in order to test their design and static performance, aiming to adapt their shape in multiple functional and environmental scenarios. In parallel, the LCA impact of the given design scenarios are taken into consideration, again from the early design phase, and include, among other objectives, material minimization, less environmental impact of building materials and less energy consumption based on the proposed digital fabrication technology. This is examined by comparing digital design and robotic automated results using three types of ecological materials.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaaderis2018_110
id	ecaaderis2018_110
authors	Kyprianou, Stefanos, Polyviou, Pavlos, Tsaggari, Marianna and Phocas, Marios C.
year	2018
title	Tall Tensegrities - A Parametric Deformation Control Analysis
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 87-94
keywords	The design of tall structures with high slenderness, i.e. width/height ratio, and minimum self-weight, considers in addition to aspects of modularity, constructability and connectivity of the primary members, the static and dynamic behavior of the systems. Assuming constant mass and damping ratio over the height of the building, the structure necessitates respective definition of its stiffness properties, resulting from its configuration, i.e. geometrical stiffness, and the section properties of the members applied, for achieving controlled deformations under horizontal loading. In particular, structural deformation control is traced in the current paper in simplified means through a Finite-Element Analysis of a tall tensegrity structure with overall system dimensions of 12.12/96 m, i.e. 1/7.92 slenderness, developed in three different configurations. Furthermore, a differentiated pretension of the tension-only members of one of the systems has been applied for control of its response behavior. The parametric structural analysis of the tensegrity systems verifies the significant role of the tension-only elements in the system stabilization and horizontal response.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	caadria2018_050
id	caadria2018_050
authors	Lo, Tian Tian and Schnabel, Marc Aurel
year	2018
title	Virtual & Augmented Studio Environment (VASE) - Developing the Virtual Reality Eco-System for Design Studios
doi	https://doi.org/10.52842/conf.caadria.2018.1.443
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 443-452
summary	Virtual Reality (VR) is being revived in major disciplines, including architecture. VR is no longer only employed for basic operations, such as construction of 3D models, dynamic renderings, closed-loop interaction, inside-out perspective and enhance sensory feedback. This paper explains how over the past twenty years technologies and software have evolved that a new eco-system for design processes have risen. This paper discusses how students made full use of both software and equipment in the whole design process; from ideas exploration to site analysis to form generation to design realization. Students have been exposed to a whole range of digital software tools in the beginning. As most of them were already familiar with modelling software, they have in particular been introduced to animation software, game engines and even 3D documentation software such as photogrammetry. Most importantly, they were led to IVE. The paper points out the benefits of adopting such methodology and the difficulties faced by the students at the various stages of the design process.
keywords	Design Studio; Virtual Reality; Software and Equipment; Design Exchange
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: