Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_209
id	ecaade2018_209
authors	Lescop, Laurent and Suner, Bruno
year	2018
title	15 Years of Immersion - Evolution and assessment of a pedagogy
doi	https://doi.org/10.52842/conf.ecaade.2018.1.391
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 391-400
summary	Since 2002, the Master's students at the Graduate School of Architecture of Nantes who are enrolled in the "Architecture in Representation" orientation have carried out a pioneering work in the use of digital tools. By adopting the most recent techniques and tools, they have transformed the architectural design approach, thanks to the integration of "narrative design". In fifteen years, students will have gone from the board to digital drawing, to immersion and virtual reality, including short films and interactive devices, without losing sight that the subject of the work is in fact the project, and not the tool. In doing so, they have questioned, led by their professors, the status of synthesis images, the challenges of interactive narrative and of the virtual world. Within the school, time was needed to accept these explorations; the use of digital tools, long criticised, was blocking the appreciation of the content and the students' experimental approaches. Nowadays, the experience from these past fifteen years lead us to ask this question: do digital tools renew the design paradigms, or are we only involved in the evolution of practices through the integration of other means?
keywords	Representation; perspective; immersion; perception; 3D; VR
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2018_107
id	ecaade2018_107
authors	Sopher, Hadas, Fisher-Gewirtzman, Dafna and Kalay, Yehuda E.
year	2018
title	Use of Immersive Virtual Environment in the Design Studio - An Assessment Model
doi	https://doi.org/10.52842/conf.ecaade.2018.2.843
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 843-852
summary	The Architectural Studio is dedicated to teaching students the design process. Students learn by developing an architectural artefact in increasing complexity. They do so through three phases: structuring the problem, developing design proposals and converging decisions into a detailed solution state. This process has been taking place mostly in traditional physical settings. The advent of new technologies, most notably Immersive Virtual Environments (IVEs), introduces a new kind of setting that holds promise to influence the architectural learning process. This paper describes a model we have developed to assess the impact of IVE on this learning process. To do so, we have developed a method for coding learners' design decisions and the way they are developed, accounting for their educational settings - whether a traditional studio classroom or an IVE. The method consists of units we term Knowledge Construction Activities (KCAs) and reveals the relationship between the learning process and the educational setting in which it takes place, through time. The results revealed that the IVE supported extensive design development, especially during the second and third learning phases, calling for an informed integration of IVEs in future Studio syllabi.
keywords	Design Studio; Knowledge Construction Activities; Immersion; Design process; Design analysis
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_399
id	ecaade2018_399
authors	Cutellic, Pierre
year	2018
title	UCHRON - An Event-Based Generative Design Software Implementing Fast Discriminative Cognitive Responses from Visual ERP BCI
doi	https://doi.org/10.52842/conf.ecaade.2018.2.131
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 131-138
summary	This research aims at investigating BCI technologies in the broad scope of CAAD applications exploiting early visual cognition in computational design. More precisely, this paper will describe the investigation of key BCI and ML components for the implementation and development of a software supporting this research : Uchron. It will be organised as follows. Firstly, it will introduce the pursued interest and contribution that visual-ERP EEG based BCI application for Generative Design may provide through a synthetic review of precedents and BCI technology. Secondly, selected BCI components will be described and a methodology will be presented to provide an appropriate framework for a CAAD software approach. This section main focus is on the processing component of the BCI. It distinguishes two key aspects of discrimination and generation in its design and proposes a new model based on GAN for modulated adversarial design. Emphasis will be made on the explicit use of inference loops integrating fast human cognitive responses and its individual capitalisation through time in order to reflect towards the generation of design and architectural features.
keywords	Human Computer Interaction; Neurodesign; Generative Design; Design Computing and Cognition; Machine Learning
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201816401
id	ijac201816401
authors	Doyle, Shelby and Nick Senske
year	2018
title	Digital provenance and material metadata: Attribution and co-authorship in the age of artificial intelligence
source	International Journal of Architectural Computing vol. 16 - no. 4, 271-280
summary	This speculative essay examines a single drawing, produced in a collaboration between the authors and a Turtle robot, in a search for methods to evaluate and document provenance in artificial intelligence and robotic design. Reflecting upon the layers of authorship in our case study reveals the complex relationship that already exists between human and machine collaborators. In response to this unseen provenance, we propose new modes to document the full range of creative contribution to the design and production of artifacts from intellectual inputs to digital representations to physical labor. A more comprehensive system for artificial intelligence/robotic attribution could produce counter- narratives to technological development which more fully acknowledge the contributions of both humans and machines. As artificially intelligent design technologies distinguish themselves with distinct capabilities and eventual autonomy, a system of embedded attribution becomes the basis for human–machine collaboration, indeterminacy, and unexpected new applications for existing tools and methods.
keywords	Artificial intelligence, robotics, metadata, attribution, co-authorship, ethics
series	journal
email
last changed	2019/08/07 14:04

_id	ecaade2018_297
id	ecaade2018_297
authors	Elesawy, Amr, Caranovic, Stefan, Zarb, Justin, Jayathissa, Prageeth and Schlueter, Arno
year	2018
title	HIVE Parametric Tool - A simplified energy simulation tool for educating architecture students
doi	https://doi.org/10.52842/conf.ecaade.2018.1.657
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 657-666
summary	This paper presents HIVE, a new open source design toolbox, which focuses on teaching concepts of Energy and Climate Systems integration in buildings. .The aim is to empower architecture students to integrate aspects of energy efficiency during the architectural design process. The tool employs a simplified input format designed for ease of use and provides almost instantaneous, direct feedback to support students of all experience levels in the early, conceptual building design stages, where numerous iterations need to be conducted efficiently within a short period of time.The project aims to create a robust toolbox that will become an innovative reference in architecture and engineering - lectures, design studios, and project-based learning - through its capacity to quickly, and effectively, translate building energy systems concepts into graphic formats central to building design teaching and practice. The fast feedback that the users receive to their design parameters changes will enable an effective and quick build-up of tacit knowledge about building energy systems, complementary to the explicit, theoretical knowledge that is usually taught in courses, thus creating a more complete learning experience.
keywords	Building Simulation; Low-energy architecture; Integrated curriculum; PV Assessment; Simplified GUI; Architecture Education
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_471
id	ecaadesigradi2019_471
authors	Güzelci, Orkan Zeynel, Alaçam, Sema and Güzelci, Handan
year	2019
title	Trend Topics and Changing Concepts of Computational Design in the Last 16 Years - A content analysis
doi	https://doi.org/10.52842/conf.ecaade.2019.1.423
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-430
summary	This study argues that analysis of written content might be helpful to provide clues at a certain extent on the future directions of current research areas and the emergence of new study areas. In the scope of the study, the International Journal of Architectural Computing (IJAC) which has been a scientific platform covering many pioneer publications on education research in computer-aided architectural design (CAAD) field was selected as source content. Although the size of the source domain is limited, the analysis of abstracts and titles of 439 articles published in IJAC between 2003 and 2018 revealed promising results which can be examined under four characteristics: "constant", "emerging", "fading" and "solidifying" concepts. The tokens in the analysis process are words, phrases, topic nodes and links between topic nodes. The outcomes of this study might contribute to tracking the evolution of concepts their emergence or disusage in different time and contexts, and interrelations between different concepts.
keywords	content analysis; computational design concepts; IJAC
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:49

_id	ecaade2018_125
id	ecaade2018_125
authors	Khoo, Chin Koi and Shin, Jae-Won
year	2018
title	Designing with Biomaterials for Responsive Architecture - A soft responsive "bio-structural" hydrogel skin
doi	https://doi.org/10.52842/conf.ecaade.2018.2.285
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 285-292
summary	Synthetic biomaterials are not only widely explored in tissue engineering, but also present important opportunities in responsive architecture, especially soft structures and skins. In this paper we present how water-containing hydrogels can be adapted to digital fabrication techniques to design a soft responsive skin with integrated skeleton and surface. This research project details preliminary investigation into how tough hydrogels with different material properties can be designed and incorporated into laser-cutting and 3D printing methods typically used in architectural design. The outcome of this research produces an early prototype of thermally sensitive, tough hydrogel skin that responds to environmental stimuli such as temperature and moisture. Our work provides initial insights into how a soft responsive "bio-structural" architectural skin can be designed by integrating actuation, structure, and skins.
keywords	Biomaterials; digital fabriication; hydrogel; responsive architecture
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac201816403
id	ijac201816403
authors	Pantazis, Evangelos and David Gerber
year	2018
title	A framework for generating and evaluating façade designs using a multi-agent system approach
source	International Journal of Architectural Computing vol. 16 - no. 4, 248-270
summary	Digital design paradigms in architecture have been rooted in representational models which are geometry centered and therefore fail to capture building complexity holistically. Due to a lack of computational design methodologies, existing digital design workflows do little in predicting design performance in the early design stage and in most cases analysis and design optimization are done after a design is fixed. This work proposes a new computational design methodology, intended for use in the area of conceptual design of building design. The proposed methodology is implemented into a multi-agent system design toolkit which facilitates the generation of design alternatives using stochastic algorithms and their evaluation using multiple environmental performance metrics. The method allows the user to probabilistically explore the solution space by modeling the design parameters’ architectural design components (i.e. façade panel) into modular programming blocks (agents) which interact in a bottom-up fashion. Different problem requirements (i.e. level of daylight inside a space, openings) described into agents’ behavior allow for the coupling of data from different engineering fields (environmental design, structural design) into the a priori formation of architectural geometry. In the presented design experiment, a façade panel is modeled into an agent-based fashion and the multi-agent system toolkit is used to generate and evolve alternative façade panel configurations based on environmental parameters (daylight, energy consumption). The designer can develop the façade panel geometry, design behaviors, and performance criteria to evaluate the design alternatives. The toolkit relies on modular and functionally specific programming modules (agents), which provide a platform for façade design exploration by combining existing three-dimensional modeling and analysis software.
keywords	Generative design, multi-agent systems, façade design, agent-based modeling, stochastic search
series	journal
email
last changed	2019/08/07 14:04

_id	ijac201816405
id	ijac201816405
authors	Poustinch, Ebrahimi
year	2018
title	Subtractive digital fabrication with actual robot and virtual material using a MARI platform
source	International Journal of Architectural Computing vol. 16 - no. 4, 281-294
summary	This article presents a project-based research study using a new hybrid augmented reality platform called the Mixed Architectural Robotic Interface. Using the Mixed Architectural Robotic Interface as a mixture of different software and hardware platforms, ranging from design/modeling software, simulation engine, and an augmented reality application, the designer would be able to evaluate the possibilities/limitations of the fabrication, in real time and as part of the design. This method advances designer’s understanding of the fabrication equipment as an input for the design decision-making process. This article demonstrates the potential of a virtual/actual hybridized platform as a new medium to design, simulate, and evaluate, in order to enhance the digital design and fabrication. Introducing the possibility of real-time communication between the digital design software and the fabrication platforms as well as the augmented reality simulation of the fabrication process, the Mixed Architectural Robotic Interface enables designers to test the fabrication process with the fabrication equipment in the early stages of the design process. This method makes it possible to move beyond the traditional limitations of machines pursuing “un-expected creativity,” without any additional time or cost for the process. Using the virtual material for fabrication, the Mixed Architectural Robotic Interface reduces the time and cost of having multiple iterations and encourages the hands-on experimental use of the fabrication tool (in this article robotic/computer numeric control milling) not only as a production tool but also as a design study tool.
keywords	Design, robotics, augmented reality, digital fabrication, computer numeric control milling, virtual material
series	journal
email
last changed	2019/08/07 14:04

_id	ijac201816302
id	ijac201816302
authors	Schnabel, Marc Aurel and Blaire Haslop
year	2018
title	Glitch architecture
source	International Journal of Architectural Computing vol. 16 - no. 3, 183-198
summary	Architectural designs are visualised on computer screens through arrays of pixels and vectors. These representations differ from the reality of buildings, which over time will unavoidably age and decay. How, then, do digital designs age over time? Do we interpret glitching as a sudden malfunction or fault in the computation of the design’s underlying data, or as digital decay resulting not from the wear and tear of tangible materials but from the decomposition of the binary code, or from system changes that cannot appropriately interpret the data? By exploring a series of experimental design practices for deployments and understandings that are the consequence of malfunctions during computational processing, glitches are reinterpreted. Advancing from two-dimensional glitch art techniques into three-dimensional interpretations, the research employs a methodology of systematic iterative processes to explore design emergence based on glitches. The study presents digital architectural form existing solely in the digital realm, as an architectural interpretation of computational glitches through both its design process and aesthetic outcome. Thus, this research intends to bring a level of authenticity to the field through three-dimensional interpretations of glitch in an architectural form.
keywords	Digital decay, glitch, digital design methods, glitch-space, data interpretation
series	journal
email
last changed	2019/08/07 14:03

_id	ecaade2018_221
id	ecaade2018_221
authors	Veliz Reyes, Alejandro, Gomaa, Mohamed, Chatzivasileiadi, Aikaterini, Jabi, Wassim and Wardhana, Nicholas Mario
year	2018
title	Computing Craft - Early stage development of a robotically-supported 3D printing system for cob structures
doi	https://doi.org/10.52842/conf.ecaade.2018.1.791
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 791-800
summary	This paper focuses on an ongoing investigation exploring fabrication procedures and methodologies for robotically supported 3D printing utilising cob and other clay-based sustainable building materials, and is part of an ongoing collaboration between Cardiff University and the University of Plymouth. The methodology is that of a prototype development process within the framework of a feasibility studies call supported by the "Connected Everything: Industrial Systems in the Digital Age" EPSRC (Engineering and Physical Sciences Research Council) network. This project expects to not only reveal technological and design opportunities for 3D printed cob structures, but more broadly to engage with vernacular practice through digital means. As a result, this paper expects to contribute to the discipline by providing a framework engaging with digital practice as a way to bridge the knowledge gap between digitally-driven and vernacular modes of knowledge production, dissemination and representation.
keywords	cob construction; robotics; 3D printing; vernacular architecture
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2018_155
id	ecaade2018_155
authors	Zupancic, Tadeja, Herneoja, Aulikki, Schoonjans, Yves and Achten, Henri
year	2018
title	A Research Framework of Digital Leadership
doi	https://doi.org/10.52842/conf.ecaade.2018.1.641
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 641-646
summary	In leading architectural offices where digital technologies have become de facto part and parcel of the architectural design process, it has become pointless to talk about "architectural design" and "digital technology" as separate phenomena. In fact, those offices showcase advances in their designs through combined developments in process, tools, teams, materials, and research. Far from being a passive addition to conventional processes, digital technologies transform the whole spectrum of architectural endeavour. Architects and offices in the front of these development showcase a particular competence set that is distinct from others, which we propose to call "digital leadership." We define "digital leadership" as the "integration of distributed knowledge from social sciences/humanities and digital technologies through the integrative artistic power of Architectural Design applied to the built environment as a real-world research and design laboratory." Although there have been many digital pioneers since the early 1960'ies, we can now see digital leadership as a more mainstream movement. However, there is no unified framework or theoretical understanding of digital leadership. In this paper we report on work carried out on four universities which has the aim to build such a framework.
keywords	Digital leadership; Architectural design process; Collaborative environments; Digital ecologies; Human resources
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2018_270
id	ecaade2018_270
authors	Gönenç Sorguç, Arzu, Kruºa Yemiºco?lu, Müge and Özgenel, Ça?lar F?rat
year	2018
title	Multiverse of a Form - Snowflake to Shelder
doi	https://doi.org/10.52842/conf.ecaade.2018.2.411
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 411-416
summary	The almost seamless integration of computation, fabrication and immersion technologies in architecture not only constitutes potentials for exploring design instances through multiple media but also changes design paradigm from form-formation to form-formation-exploration. In this sense, multiverse of design as proposed in this study and integration of various design technologies from virtual to real aims to advance higher order thinking skills and a more exclusive design exploration in computational design process. Undoubtedly, the multiverse of design cannot be handled without emerging technologies temptingly easing fabrication in both physical and virtual realms. On the other hand, such technologies can easily be deceptive in regard with scale, choice of material, details and etc.Therefore, how and which modes of exploration (physical or virtual) should be integrated into the design process is critical. "Exploration of design" in the realm of new technologies does not only connote a formal exploration of design and its performance but it also becomes a way learning/thinking of design enhancing critical thinking and constructivist learning. Within the scope of this study, the multiverse of a form(ation) is explained throughly and examplified through snowflake pavilion which is issued to 4th year and graduate students in the scope of an elective studio course. Snowflake pavillon comprises physical, virtual and mapped reality as a triskelion for immersive experience for visitors.
keywords	Virtual Reality; Augmented Reality; Physical Reality; Fabrication Technologies; Multiverse of Design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2018_1875
id	sigradi2018_1875
authors	Kalantari, Cruze-Garza; Banner, Pamela; Contreras-Vidal, Jose Luis
year	2018
title	Computationally Analyzing Biometric Data and Virtual Response Testing in Evaluating Learning Performance of Educational Setting Through
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 390-396
summary	Due to construction costs, the human effects of innovations in architectural design can be expensive to test. Post-occupancy studies provide valuable data about what did and did not work in the past, but they cannot provide direct feedback for new ideas that have not yet been attempted. This presents designers with something of a dilemma. How can we harness the best potential of new technology and design innovation, while avoiding costly and potentially harmful mistakes? The current research use virtual immersion and biometric data to provide a new form of extremely rigorous human-response testing prior to construction. The researchers’ hypothesis was that virtual test runs can help designers to identify potential problems and successes in their work prior to its being physically constructed. The pilot study aims to develop a digital pre-occupancy toolset to understand the impact of different interior design variables of learning environment (independent variables) on learning performance (dependent variable). This project provides a practical toolset to test the potential human impacts of architectural design innovations. The research responds to a growing call in the field for evidence-based design and for an inexpensive means of evaluating the potential human effects of new designs. Our research will address this challenge by developing a prototype mobile brain-body imaging interface that can be used in conjunction with virtual immersion.
keywords	Signal Processing; Brain; EEG; Virtual Reality; Big Data; Learning Performance
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_190
id	caadria2018_190
authors	Lee, Ju Hyun, Gu, Ning, Taylor, Mark and Ostwald, Michael
year	2018
title	Rethinking and Designing the Key Behaviours of Architectural Responsiveness in the Digital Age
doi	https://doi.org/10.52842/conf.caadria.2018.1.359
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 359-368
summary	In the late 1960s the architect Nicholas Negroponte introduced that the physical environment could exhibit reflexive and simulated behaviours, an idea that has since been widely explored. Despite of this wider interest, there is not, however, a systematic approach to understanding architectural responsiveness in the digital age. This paper aims to provide a formal way to facilitate designing smart and interactive artificiality in the built environment. This paper presents a conceptual framework, through exploratory studies on recent architecture, highlighting four key behaviours: (1) tangible interaction, (2) embodied response, (3) ambient simulation, and (4) mixed reality. In addition, two essential enablers, collectiveness and immersion, are proposed to enhance these key behaviours. This framework can be used as a tool to systematically identify and characterise the responsiveness of "responsive architecture". The creative mixtures of the key behaviours will contribute to the development of unique responsive environments.
keywords	Responsive architecture; Responsive behaviour; Interactive art; Negroponte
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2018_1364
id	sigradi2018_1364
authors	Nunes de Vasconcelos, Guilherme; de Sousa Van Stralen, Mateus; Menezes, Alexandre; Gontijo Ramos, Fernando Murilo
year	2018
title	Perceive to learn to perceive: an experience with virtual reality devices for architecture design learning
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 985-990
summary	This work investigates the potential use of low-cost virtual reality (VR) devices in architectural education to improve spatial perception of undergraduate architecture students. The experiment involved a gradual approach into the design process, starting with an intervention on a physical space, its bidimensional representation, 3d modelling and immersion in VR. After the immersion, students answered a questionnaire with open and closed-questions about their experience, and their evaluation of the use of VR in the designing. The findings point to the use of VR as a means to explore, perceive and reflect on decisions, allowing students a better understanding of designing.
keywords	Virtual reality; Architectural design; Architecture teaching; Representation; Low-cost devices
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2018_251
id	ecaade2018_251
authors	Park, Hyejin, Panya, David Stephen, Goo, Hyungmo, Kim, Teahoon and Seo, Jihyo
year	2018
title	BIM-based Virtual Reality and Human Behavior Simulation For Safety Design
doi	https://doi.org/10.52842/conf.ecaade.2018.2.823
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 823-832
summary	The constant development of Building Information Modelling and Virtual reality in architecture and construction has gone beyond visualization and marketing in architecture to enhancing workflows of architects with assets such as immersion and interaction that assists Architects to make more informed decisions from design to construction. Using virtual reality complex decisions can be simulated and analyzed to produce iterations for the optimizing design. Recently, safety design to protect users from the risk of life has become an issue. BIM and VR for Safety Design is a beneficial collaboration for the designer to experience user safety in a virtual built environment immersively. There is a need for intensive experimentation and simulation into user-centered design safety due to the complexity of this part of the design process. The most unpredictable elements of user design safety is human behavior. this paper explores Human behavior using intelligent virtual agents in emergency situations, as this is when user safety is at highest risk in a built environment. In this paper, we explore the potential of a BIM based VR and human behavior simulation in relation to emergency situations.
keywords	BIM; Virtual Reality; Safety simulation; Safety design; human behavior
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: